summaryrefslogtreecommitdiff
path: root/src/cpu/BaseCPU.py
AgeCommit message (Collapse)Author
2012-11-02sim: Include object header files in SWIG interfacesAndreas Sandberg
When casting objects in the generated SWIG interfaces, SWIG uses classical C-style casts ( (Foo *)bar; ). In some cases, this can degenerate into the equivalent of a reinterpret_cast (mainly if only a forward declaration of the type is available). This usually works for most compilers, but it is known to break if multiple inheritance is used anywhere in the object hierarchy. This patch introduces the cxx_header attribute to Python SimObject definitions, which should be used to specify a header to include in the SWIG interface. The header should include the declaration of the wrapped object. We currently don't enforce header the use of the header attribute, but a warning will be generated for objects that do not use it.
2012-10-15Regression: Use CPU clock and 32-byte width for L1-L2 busAndreas Hansson
This patch changes the CoherentBus between the L1s and L2 to use the CPU clock and also four times the width compared to the default bus. The parameters are not intending to fit every single scenario, but rather serve as a better startingpoint than what we previously had. Note that the scripts that do not use the addTwoLevelCacheHiearchy are not affected by this change. A separate patch will update the stats.
2012-09-25sim: Move CPU-specific methods from SimObject to the BaseCPU classAndreas Sandberg
2012-08-28Clock: Add a Cycles wrapper class and use where applicableAndreas Hansson
This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-21CPU: Remove overloaded function_trace_start parameterAndreas Hansson
This patch removes the overloading of the parameter, which seems both redundant, and possibly incorrect. The inorder CPU is particularly interesting as it uses a different name for the parameter, and never make any use of it internally.
2012-08-21Clock: Move the clock and related functions to ClockedObjectAndreas Hansson
This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-05-31Bus: Split the bus into a non-coherent and coherent busAndreas Hansson
This patch introduces a class hierarchy of buses, a non-coherent one, and a coherent one, splitting the existing bus functionality. By doing so it also enables further specialisation of the two types of buses. A non-coherent bus connects a number of non-snooping masters and slaves, and routes the request and response packets based on the address. The request packets issued by the master connected to a non-coherent bus could still snoop in caches attached to a coherent bus, as is the case with the I/O bus and memory bus in most system configurations. No snoops will, however, reach any master on the non-coherent bus itself. The non-coherent bus can be used as a template for modelling PCI, PCIe, and non-coherent AMBA and OCP buses, and is typically used for the I/O buses. A coherent bus connects a number of (potentially) snooping masters and slaves, and routes the request and response packets based on the address, and also forwards all requests to the snoopers and deals with the snoop responses. The coherent bus can be used as a template for modelling QPI, HyperTransport, ACE and coherent OCP buses, and is typically used for the L1-to-L2 buses and as the main system interconnect. The configuration scripts are updated to use a NoncoherentBus for all peripheral and I/O buses. A bit of minor tidying up has also been done. --HG-- rename : src/mem/bus.cc => src/mem/coherent_bus.cc rename : src/mem/bus.hh => src/mem/coherent_bus.hh rename : src/mem/bus.cc => src/mem/noncoherent_bus.cc rename : src/mem/bus.hh => src/mem/noncoherent_bus.hh
2012-03-09CheckerCPU: Make CheckerCPU runtime selectable instead of compile selectableGeoffrey Blake
Enables the CheckerCPU to be selected at runtime with the --checker option from the configs/example/fs.py and configs/example/se.py configuration files. Also merges with the SE/FS changes.
2012-03-01x86: Fix switching of CPUsNilay Vaish
This patch prevents creation of interrupt controller for cpus that will be switched in later
2012-02-13MEM: Introduce the master/slave port roles in the Python classesAndreas Hansson
This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-01-31Merge with head, hopefully the last time for this batch.Gabe Black
2012-01-31CheckerCPU: Re-factor CheckerCPU to be compatible with current gem5Geoffrey Blake
Brings the CheckerCPU back to life to allow FS and SE checking of the O3CPU. These changes have only been tested with the ARM ISA. Other ISAs potentially require modification.
2012-01-28Merge with the main repo.Gabe Black
--HG-- rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17CPU: Moving towards a more general port across CPU modelsAndreas Hansson
This patch performs minimal changes to move the instruction and data ports from specialised subclasses to the base CPU (to the largest degree possible). Ultimately it servers to make the CPU(s) have a well-defined interface to the memory sub-system.
2012-01-07Merge with the main repository again.Gabe Black
2011-12-01ARM: Add support for having a TLB cache.Ali Saidi
--HG-- extra : rebase_source : 7a5780ab74d7c294682738c7ccb3ce8d56c6fd63
2011-11-18SE/FS: Get rid of FULL_SYSTEM in the CPU directory.Gabe Black
2011-11-02SE/FS: Get rid of FULL_SYSTEM in sim.Gabe Black
2011-10-16ARM: Turn on the page table walker on ARM in SE mode.Gabe Black
2011-10-13X86: Turn on the page table walker in SE mode.Gabe Black
2011-10-09SE/FS: Build the Interrupt objects in SE mode.Gabe Black
2011-03-26mips: cleanup ISA-specific codeKorey Sewell
*** (1): get rid of expandForMT function MIPS is the only ISA that cares about having a piece of ISA state integrate multiple threads so add constants for MIPS and relieve the other ISAs from having to define this. Also, InOrder was the only core that was actively calling this function * * * (2): get rid of corespecific type The CoreSpecific type was used as a proxy to pass in HW specific params to a MIPS CPU, but since MIPS FS hasnt been touched for awhile, it makes sense to not force every other ISA to use CoreSpecific as well use a special reset function to set it. That probably should go in a PowerOn reset fault anyway.
2011-02-06mcpat: Adds McPAT performance countersJoel Hestness
Updated patches from Rick Strong's set that modify performance counters for McPAT
2011-02-03Config: Keep track of uncached and cached ports separately.Gabe Black
This makes sure that the address ranges requested for caches and uncached ports don't conflict with each other, and that accesses which are always uncached (message signaled interrupts for instance) don't waste time passing through caches.
2011-02-01X86: Add L1 caches for the TLB walkers.Gabe Black
Small L1 caches are connected to the TLB walkers when caches are used. This allows them to participate in the coherence protocol properly.
2010-11-23X86: Loosen an assert for x86 and connect the APIC ports when caches are used.Gabe Black
2010-06-02ARM: Implement the ARM TLB/Tablewalker. Needs performance improvements.Ali Saidi
2009-10-27POWER: Add support for the Power ISATimothy M. Jones
This adds support for the 32-bit, big endian Power ISA. This supports both integer and floating point instructions based on the Power ISA Book I v2.06.
2009-09-22python: Move more code into m5.util allow SCons to use that code.Nathan Binkert
Get rid of misc.py and just stick misc things in __init__.py Move utility functions out of SCons files and into m5.util Move utility type stuff from m5/__init__.py to m5/util/__init__.py Remove buildEnv from m5 and allow access only from m5.defines Rename AddToPath to addToPath while we're moving it to m5.util Rename read_command to readCommand while we're moving it Rename compare_versions to compareVersions while we're moving it. --HG-- rename : src/python/m5/convert.py => src/python/m5/util/convert.py rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-04-21arm: Unify the ARM tlb. We forgot about this when we did the rest.Nathan Binkert
This code compiles, but there are no tests still
2009-04-08tlb: More fixing of unified TLBNathan Binkert
2009-04-08tlb: Don't separate the TLB classes into an instruction TLB and a data TLBGabe Black
2009-01-30Config: Cause a fatal() when a parameter without a default value isn't ↵Ali Saidi
set(FS #315).
2008-12-17Make Alpha pseudo-insts available from SE mode.Steve Reinhardt
2008-11-02make BaseCPU the provider of _cpuId, and cpuId() instead of being scatteredLisa Hsu
across the subclasses. generally make it so that member data is _cpuId and accessor functions are cpuId(). The ID val comes from the python (default -1 if none provided), and if it is -1, the index of cpuList will be given. this has passed util/regress quick and se.py -n4 and fs.py -n4 as well as standard switch.
2008-10-12X86: Fix the ordering of special physical address ranges.Gabe Black
2008-10-12X86: Make APICs communicate through the memory system.Gabe Black
2008-10-12X86: Make the local APIC accessible through the memory system directly, and ↵Gabe Black
make the timer work.
2008-10-12Turn Interrupts objects into SimObjects. Also, move local APIC state into ↵Gabe Black
x86's Interrupts object.
2008-08-11params: Convert the CPU objects to use the auto generated param structs.Nathan Binkert
A whole bunch of stuff has been converted to use the new params stuff, but the CPU wasn't one of them. While we're at it, make some things a bit more stylish. Most of the work was done by Gabe, I just cleaned stuff up a bit more at the end.
2008-02-05Add base ARM code to M5Stephen Hines
--HG-- extra : convert_revision : d811bf87d1a0bfc712942ecd3db1b48fc75257af
2007-11-21imported patch pagewalker.patchGabe Black
--HG-- extra : convert_revision : 8ddde313f2249e1346fa51372a156f0d2ddc3b8f
2007-11-13Add in files from merge-bare-iron, get them compiling in FS and SE modeKorey Sewell
--HG-- extra : convert_revision : d4e19afda897bc3797868b40469ce2ec7ec7d251
2007-08-26Address Translation: Make SE mode use an actual TLB/MMU for translation like FS.Gabe Black
--HG-- extra : convert_revision : a04a30df0b6246e877a1cea35420dbac94b506b1
2007-08-08Added fastmem option.Vincentius Robby
Lets CPU accesses to physical memory bypass Bus. --HG-- extra : convert_revision : e56e3879de47ee10951a19bfcd8b62b6acdfb30c
2007-07-28Turn the instruction tracing code into pluggable sim objects.Gabe Black
These need to be refined a little still and given parameters. --HG-- extra : convert_revision : 9a8f5a7bd9dacbebbbd2c235cd890c49a81040d7
2007-05-27Move SimObject python files alongside the C++ and fixNathan Binkert
the SConscript files so that only the objects that are actually available in a given build are compiled in. Remove a bunch of files that aren't used anymore. --HG-- rename : src/python/m5/objects/AlphaTLB.py => src/arch/alpha/AlphaTLB.py rename : src/python/m5/objects/SparcTLB.py => src/arch/sparc/SparcTLB.py rename : src/python/m5/objects/BaseCPU.py => src/cpu/BaseCPU.py rename : src/python/m5/objects/FuncUnit.py => src/cpu/FuncUnit.py rename : src/python/m5/objects/IntrControl.py => src/cpu/IntrControl.py rename : src/python/m5/objects/MemTest.py => src/cpu/memtest/MemTest.py rename : src/python/m5/objects/FUPool.py => src/cpu/o3/FUPool.py rename : src/python/m5/objects/FuncUnitConfig.py => src/cpu/o3/FuncUnitConfig.py rename : src/python/m5/objects/O3CPU.py => src/cpu/o3/O3CPU.py rename : src/python/m5/objects/OzoneCPU.py => src/cpu/ozone/OzoneCPU.py rename : src/python/m5/objects/SimpleOzoneCPU.py => src/cpu/ozone/SimpleOzoneCPU.py rename : src/python/m5/objects/BadDevice.py => src/dev/BadDevice.py rename : src/python/m5/objects/Device.py => src/dev/Device.py rename : src/python/m5/objects/DiskImage.py => src/dev/DiskImage.py rename : src/python/m5/objects/Ethernet.py => src/dev/Ethernet.py rename : src/python/m5/objects/Ide.py => src/dev/Ide.py rename : src/python/m5/objects/Pci.py => src/dev/Pci.py rename : src/python/m5/objects/Platform.py => src/dev/Platform.py rename : src/python/m5/objects/SimConsole.py => src/dev/SimConsole.py rename : src/python/m5/objects/SimpleDisk.py => src/dev/SimpleDisk.py rename : src/python/m5/objects/Uart.py => src/dev/Uart.py rename : src/python/m5/objects/AlphaConsole.py => src/dev/alpha/AlphaConsole.py rename : src/python/m5/objects/Tsunami.py => src/dev/alpha/Tsunami.py rename : src/python/m5/objects/T1000.py => src/dev/sparc/T1000.py rename : src/python/m5/objects/Bridge.py => src/mem/Bridge.py rename : src/python/m5/objects/Bus.py => src/mem/Bus.py rename : src/python/m5/objects/MemObject.py => src/mem/MemObject.py rename : src/python/m5/objects/PhysicalMemory.py => src/mem/PhysicalMemory.py rename : src/python/m5/objects/BaseCache.py => src/mem/cache/BaseCache.py rename : src/python/m5/objects/CoherenceProtocol.py => src/mem/cache/coherence/CoherenceProtocol.py rename : src/python/m5/objects/Repl.py => src/mem/cache/tags/Repl.py rename : src/python/m5/objects/Process.py => src/sim/Process.py rename : src/python/m5/objects/Root.py => src/sim/Root.py rename : src/python/m5/objects/System.py => src/sim/System.py extra : convert_revision : 173f8764bafa8ef899198438fa5573874e407321