| Age | Commit message (Collapse) | Author |
|---|
|
Change a66d12c guards the selection of getdents()
in x86's process.cc file with SYS_getdents, however
process.cc does not include the right header for
SYS_getdents, which leads to x86 choosing the
unimplemented call. This change adds sys/syscall.h to
address the problem.
This change also adds sys/syscall.hh to syscall_emu.cc,
which only includes syscall.hh and may not be supported on
all systems.
Change-Id: If1adcf41e9e455de5f2827ba98c542fdcacdc22e
Reviewed-on: https://gem5-review.googlesource.com/c/14775
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
Derived classes with virtual functions need to define a virtual
destructor or a protected destructor otherwise calling the base class
destructor has undefined behavior. This change adds a virtual
distructor in the base class.
Change-Id: I1c855aa56dff6585ff99b9147bdb4eb9729a0a53
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14815
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The implementation of the getdents syscall relies on SYS_getdents, which
is not available on all archs, because the getdents syscall has been
superseded by getdents64, and does not exist on newer archs such as
aarch64.
This leads the build to break on aarch64 hosts with error:
error: 'SYS_getdents' was not declared in this scope
Change-Id: I8701fb5b61c0418b14a9463ef135a391a7f7a9ba
Reviewed-on: https://gem5-review.googlesource.com/c/14596
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
Other objects in the simulation may try to deschedule their events when
destructed, and if they're cleaned up after the event queue is then
they might try to deschedule events on an event queue that no longer
exists.
Change-Id: I9452ce52fba78297ce3dc4b3884289b5e2f2574d
Reviewed-on: https://gem5-review.googlesource.com/c/14400
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This patch is moving template overloading for BitUnions into the
showParam, parseParams functions. Henceforth BitUnion types will use the
common param wrapper.
This patch implicitly implements (UN)SERIALIZE_CONTAINER for BitUnions.
Change-Id: I0e1faadb4afd4dc9de5dc5fca40041e349c9ba73
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13636
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch is moving the definitions of paramIn/Out templates to
the header file. In this way we gain:
1) We don't have to do explicit instantiation anymore for user defined
types. This spares us from including data type header files into
serialize.cc
2) We can overload show/parseParam for BitUnions or any other type
that requires special handling when serializing. Just by overloading
the two templates we get all the containers' (list, vector, array..)
serialization for free
2) gtest: With the idea of adding unit tests for Serializable objects,
we can avoid importing serialize.cc and just redefine Serializable
methods in the test source, implementing a Serializable stub
Change-Id: I45a9bb87d5ef886a3668fd477005cd105f612e36
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13635
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
That makes it available when python is left out, and makes it available
to c++ code without having to call back into python.
Change-Id: If82e7e8eff526f2b957f84afe046e1d56fed4aa2
Reviewed-on: https://gem5-review.googlesource.com/c/14055
Reviewed-by: Srikant Bharadwaj <srikant.bharadwaj@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Before this commit, the following code:
dir_fd = open(".", O_DIRECTORY);
file_fd = openat(dir_fd, "ble", O_CREAT, S_IRUSR | S_IWUSR);
would create a file called ".ble" in the current working directory,
instead of the correct "ble".
Change-Id: I1525a088d49744e29b760387afabef9f1ac98646
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13005
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
This patch is making it possible to use SERIALIZE_ARRAY and UNSERIALIZE
array for serializing arrays of BitUnions.
Change-Id: I682766b472585f70a89338f373fb94dff5db53c3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12924
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Add getdents, rmdir, chdir, and mknod to SE mode for x86.
Change-Id: I387ea3066869e8999bc0064f74070f4e47c1e9a1
Reviewed-on: https://gem5-review.googlesource.com/12112
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Strips off superfluous inline specifiers in header file.
Changes return types and parameters that deal with strings
to include the const& specifiers.
Change-Id: I570b1801abb059b91216f0223458d00963b9ca1c
Reviewed-on: https://gem5-review.googlesource.com/12111
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Some members were defined as public when they should have been
privately declared so these were moved to the appropriate spot.
The operator[] had inline specified for for an in-class
definition which is redundant since inline definitions are
always implicitly inline.
Private members had the leading underscore applied to them to
denote that they're private (consistent with style guide).
Changed static const defined class variable into a constexpr
with brace-list initialization.
Change-Id: If3054416b57827d1542e9ebab428d67d0e767723
Reviewed-on: https://gem5-review.googlesource.com/12110
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The AuxVector class is responsible for holding Process data.
The data that it holds is normally setup by an OS kernel in
the process address space. The purpose behind doing this is
to pass in information that the process will need for various
reasons. (Check out the enum in the header file for an idea of
what the AuxVector holds.)
The AuxVector struct was changed into a class and encapsulation
methods were added to protect access to the member variables.
The host ISA may have a different endianness than the simulated
ISA. Since data is passed between the process address space and
the simulator for auxiliary vectors, we need to worry about
maintaining endianness for the right context.
Change-Id: I32c5ac4b679559886e1efeb4b5483b92dfc94af9
Reviewed-on: https://gem5-review.googlesource.com/12109
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
Currently 'Clock period in ticks' stat is not accessible in power equations .
This patch adds a variable 'clock_period' to be referenced to get the Clock period in
ticks
Signed-off-by: Sherif Elhabbal <elhabbalsherif@gmail.com>
Change-Id: Icac6a2e2003ed75d1680180e53343b0203139d72
Reviewed-on: https://gem5-review.googlesource.com/12664
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The value GHz with a small z was spelled GHZ with a large z, which was
inconsistent with the other frequency-like values in that namespace.
Change-Id: I55dfc447a5811ae584e46769cd9cadd08bd1e716
Reviewed-on: https://gem5-review.googlesource.com/12572
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
A new method (lookupMasterId) has been added to the System. A client
should use it when querying the System for the MasterID of a particular
master. It changes from getMasterId since it is
not registering a new MasterID if the master is not found in the
master's list.
Change-Id: I701158d22e235085bba9ab91154fbb702cae1467
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11969
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: Iebda05c130b4d2ee8434cad1e703933bfda486c8
Reviewed-on: https://gem5-review.googlesource.com/11490
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: If8922c2233bbe1f6fce35f64d1a44b91d2cfeed2
Reviewed-on: https://gem5-review.googlesource.com/11489
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
Do not allow the exit() syscall to terminate gem5 when running in dist-gem5
mode. The exit must be coordinated by the distributed interface instead.
Change-Id: I57f47610b59fe9e18ba3a1667fb5e45cecac1a81
Reviewed-on: https://gem5-review.googlesource.com/10461
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Mohammad Alian <m.alian1369@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Change-Id: I26136fb49f743c4a597f8021cfd27f78897267b5
Reviewed-on: https://gem5-review.googlesource.com/10463
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
This patch fixes the master's name allocation in the system. The error
was occurring when a submaster was not specified in getMasterId: a
trailing separation dot was still added to the master's name.
Change-Id: I0e67900f6fdd36a61900453b55219fc7007d1b05
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10301
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
With this patch a gem5 System will store more info about its Masters.
While it was previously keeping track of the Master name and Master ID
only, it is now adding a per-Master pointer to the SimObject related to
the Master.
This will make it possible for a client to query a System for a Master
using either the master's name or the master's pointer.
Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Change-Id: I0a9a30bc4a89411e0f1dd897f0d1f05f20790b50
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/9981
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
|
|
Change-Id: Ieec4651000b3b4de05ba5ba11fdfa5392a5477e7
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/8904
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
The temperature used for the power calculations was fixed at 0
degrees, unless a thermal model was setup. This commit allows
the user to set the temperature that needs to be used by the
power calculation during gem5 configuration. This value will be
overwritten if there are thermal models present.
Change-Id: I7ca8fa6766bdcba9d362c12fc75d1e1f74385f35
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8602
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Static, dynamic or all to differentiate between types of power models
so for example static models will not be asked for a dynamic power
Change-Id: I3a0385821f7c671aedddaebeb038c677367faa81
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8601
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Add helper functions to swap between guest byte order and host byte
order that take a guest endianness as a parameter. These functions are
called htog and htog to be consistent with the helper functions that
extract guest byte order from a compile time constant.
Change-Id: Ie6be7dfd3b7a58ad6bfb57b25be5f85b5f425929
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8201
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
A System object has a _numContexts member variable which represent the
number of ThreadContext registered in the System. Since this has to
match the size of the ThreadContext vector, this patch removes the
manually cached size. This was usually used as a for-loop index, whereas
we want to enforce the use of range-based loops whenever possible.
Change-Id: I1ba317c0393bcc9c1aeebbb1fc22d7b2bc2cf90c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8062
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
This patch adds an extra layer to the pyfdt library such that usage
gets easier and device tree nodes can be specified in less code,
without limiting original usage. Note to not import both the pyfdt
and fdthelper in the same namespace (but generally fdthelper is all
you need, because it supplies the same classes even when they are not
extended in any way)
Also, this patch lays out the primary functionality for generating a
device tree, where every SimObject gets an empty generateDeviceTree
method and ArmSystems loop over their children in an effort to merge
all the nodes. Devices are implemented in other patches.
Change-Id: I4d0a0666827287fe42e18447f19acab4dc80cc49
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5962
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Rather than store the actual TLB entry that corresponds to a mapping,
we can just store some abstracted information (address, a few flags)
and then let the caller turn that into the appropriate entry. There
could potentially be some small amount of overhead from creating
entries vs. storing them and just installing them, but it's likely
pretty minimal since that only happens on a TLB miss (ideally rare),
and, if it is problematic, there could be some preallocated TLB
entries which are just minimally filled in as necessary.
This has the nice effect of finally making the page tables ISA
agnostic.
Change-Id: I11e630f60682f0a0029b0683eb8ff0135fbd4317
Reviewed-on: https://gem5-review.googlesource.com/7350
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The new version extracts all the x86 specific aspects of the class,
and builds the interface around a variable collection of template
arguments which are classes that represent the different levels of the
page table. The multilevel page table class is now much more ISA
independent.
Change-Id: Id42e168a78d0e70f80ab2438480cb6e00a3aa636
Reviewed-on: https://gem5-review.googlesource.com/7347
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
serialize.hh should not reference internal implementation details in
the underlying BitUnion types.
Change-Id: I1ce29243db63801b7788f037fdc54811bdab889c
Reviewed-on: https://gem5-review.googlesource.com/7203
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
They are now oriented around a class which makes it easy to provide
custom setter/getter functions which let you set or read bits in an
arbitrary way.
Future additions may add the ability to add custom bitfield methods,
and index-able bitfields.
Change-Id: Ibd6d4d9e49107490f6dad30a4379a8c93bda9333
Reviewed-on: https://gem5-review.googlesource.com/7201
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Fold the GDBListener class into the main BaseRemoteGDB class, move
around a bunch of functions, convert a lot of internal functions to
be private, move some functions into the .cc, make some functions
non-virtual which didn't really need to be overridden.
Change-Id: Id0832b730b0fdfb2eababa5067e72c66de1c147d
Reviewed-on: https://gem5-review.googlesource.com/7422
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Now that Nothing inherits from PageTableBase directly, it can be
merged into FuncPageTable. This change also takes the opportunity to
rename the combined class to EmulationPageTable which lets you know
that it's specifically for SE mode.
Also remove the page table entry cache since it doesn't seem to
actually improve performance. The TLBs likely absorb the majority of
the locality, essentially acting like a cache like they would in real
hardware.
Change-Id: If1bcb91aed08686603bf7bee37298c0eee826e13
Reviewed-on: https://gem5-review.googlesource.com/7342
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
The code in this function was a little convoluted. This change attempts
to simplify it a little bit to make it easier to read.
Change-Id: I1ae557b9fede47fa89a9ea550bd0af8ad242449f
Reviewed-on: https://gem5-review.googlesource.com/7421
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This gets rid of an awkward NoArchPageTable class, and also gives the
arch a place to inject ISA specific parameters (specifically page size)
without having to have TheISA:: in the generic version of these types.
Change-Id: I1412f303460d5c43dafdb9b3cd07af81c908a441
Reviewed-on: https://gem5-review.googlesource.com/6981
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
(1) This patch sets a correct order of clone syscall's arguments for
RISC-V. Linux kernel 4.15 uses CLONE_BACKWARDS flag by default for
RISC-V. The flag in the Linux kernel defines the list of clone syscall's
arguments in the following order:
clone_flags (flags)
newsp (newStack)
parent_tidptr (ptidPtr)
tls (tlsPtr)
child_tidptr (ctidPtr)
Code reference:
https://github.com/riscv/riscv-linux/blob/master/kernel/fork.c
https://github.com/riscv/riscv-linux/blob/master/arch/riscv/Kconfig
(2) This patch copies a parent thread's register values to its child
thread in clone syscall.
Change-Id: I2eb1c8e80990861080ce7153503ed784fb2c7bdf
Reviewed-on: https://gem5-review.googlesource.com/6904
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
|
|
The old_limit pointer is supposed to be the 4th argument (index 3) of
the prlimit syscall. This patch sets old_limit pointer to the correct
argument.
Change-Id: I97808f7234cd2622cb3eb2f1e0beb7fc8cf492c1
Reviewed-on: https://gem5-review.googlesource.com/6903
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
|
|
Replace them with std::array<>s.
Change-Id: I76624c87a1cd9b21c386a96147a18de92b8a8a34
Reviewed-on: https://gem5-review.googlesource.com/6602
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
These swap the endianness of each element within the array
individually.
They probably obsolute the Twin(32|64)_t types which I believe were
used for SPARC.
Change-Id: Ic389eb24bdcdc0081068b0c5a37abdf416f6c924
Reviewed-on: https://gem5-review.googlesource.com/6581
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Tags are just arbitrary strings which are attached to source files
which mark them as having some property. By default, all source files
have the "gem5 lib" tag added to them which marks them as part of the
gem5 library, the primary component of the gem5 binary but also a
seperable component for use in, for example, system C.
The tags can be completely overridden by setting the "tags" parameter
on Source, etc., functions, and can be augmented by setting "add_tags"
which are tags that will be added, or alternatively additional tags.
It's possible to specify both, in which case the tags will be set to
the union of tags and add_tags. add_tags is supposed to be a way to
add extra tags to the default without actually overriding the default.
Both tags and add_tags can be a list/tuple/etc of tags, or a single
string which will be converted into a set internally.
Other existing tags include:
1. "python" for files that need or are used with python and are
excluded when the --without-python option is set
2. "main" for the file(s) which implement the gem5 binary's main
function.
3. The name of a unit test to group its files together.
4. Tags which group source files for partial linking.
By grouping the "tags" into a single parameter instead of taking all
extra parameters as tags, the extra parameters can, in the future, be
passed to the underlying scons environment. Also, the tags are either
present or not. With guards, they could be present and True, present
and False, or not present at all.
Change-Id: I6d0404211a393968df66f7eddfe019897b6573a2
Reviewed-on: https://gem5-review.googlesource.com/5822
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds a default value of unimplementedFunc to SyscallDesc's
constructor's second argument, which makes adding system call
placeholders to SE mode cleaner.
Change-Id: I3e7efb3a887cc52d16d2095d3dd2e2a96fb882fb
Reviewed-on: https://gem5-review.googlesource.com/5501
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
|
|
This fixes a fatal already mapped error in
FuncPageTable::allocate that occurs in some cases
when restoring from a checkpoint.
Change-Id: Ib726a69358118626663e42b7f14889b0d3a98de0
Reported-by: Ruohuang Zheng <zhengruohuang@gmail.com>
Signed-off-by: Austin Harris <austinharris@utexas.edu>
Reviewed-on: https://gem5-review.googlesource.com/5901
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Recent Linux kernels for AArch64 have changed their start addresses
but we still want to relocate the kernel to 0x80080000 which
required hacking the load_addr_mask in Realview.py to be 0x7ffffff
from 0xfffffff to mask off the proper number of MSBs to load the
kernel in the desired location. To avoid having to make this change
in the future again, we auto-calculate the load_addr_mask if it is
specified as 0x0 in the System sim-object to find the most restrictive
address mask instead of having the configuration specify it. If the
configuration does specify the address mask, we use it instead of
auto-calculating.
Change-Id: I18aabb5d09945c6e3e3819c9c8036ea24b6c35cf
Signed-off-by: Geoffrey Blake <Geoffrey.Blake@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2323
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Added a check to avoid unlocking/locking the same event queue. Also,
added an optional parameter to enable the migration to be skipped. This
can be useful to disable the synchronization for certain runtime
conditions.
Change-Id: I4b03b3ffff4f9503153cd41dd8aa78705bf16cc4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5730
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
This patch allows the user to specify more than one
power model for any given Clocked Object. This is
useful and some times necessary to properly model
components that have multiple power sources (or
subcomponents) but gem5 doesn't model them.
The ideal solution would be to have a DictParam
to replace the VectorParam so each model can have
a name and can be identified in the stats file.
Change-Id: I4080a7054a16b56069c44750a7a9ce4e674cdf9d
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5733
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I5bbf36ef21ac14d9edf68ec6766d33f88e84d308
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5729
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
