From b582b5058e1ecfc4f8a38c74ff111bed47d9fdbb Mon Sep 17 00:00:00 2001 From: Ali Saidi Date: Mon, 17 May 2004 02:04:19 -0400 Subject: palcode updated to deal with interrupts correctly deleted and then upon realizing we needed them undeleted a bunch of header files in the palcode dir console/Makefile: fixed so it will work with tru64... still haven't got the console to build under linux palcode/platform_m5.s: fixed code to "fake" srm console interrupt handling correctly include serial interrupts --- system/alpha/console/Makefile | 2 +- system/alpha/palcode/platform_m5.s | 94 +++++++++++++++++++++++++------------- 2 files changed, 62 insertions(+), 34 deletions(-) (limited to 'system') diff --git a/system/alpha/console/Makefile b/system/alpha/console/Makefile index 5905fa9d2..d83bdc9fa 100644 --- a/system/alpha/console/Makefile +++ b/system/alpha/console/Makefile @@ -8,7 +8,7 @@ SOURDIR = ./ PALCODE = ../palcode INCLUDEH = ../h CC=gcc -AS=gas +#AS=gas dbmentry.o: dbmentry.s $(AS) $(INCLUDES) -nointrinsics -o $*.o $*.s diff --git a/system/alpha/palcode/platform_m5.s b/system/alpha/palcode/platform_m5.s index 2da52d847..7e068b100 100644 --- a/system/alpha/palcode/platform_m5.s +++ b/system/alpha/palcode/platform_m5.s @@ -802,47 +802,75 @@ sys_int_20: ALIGN_BRANCH sys_int_21: - or r31,3,r16 // a0 means it is a I/O interrupt + or r31,3,r16 // a0 means it is a I/O interrupt - lda r8,0xf01(r31) - sll r8,32,r8 - ldah r9,0xa0(r31) - sll r9,8,r9 - bis r8,r9,r8 - lda r8,0x0080(r8) - ldqp r9, 0(r8) // read the MISC register + lda r8,0xf01(r31) + sll r8,32,r8 + ldah r9,0xa0(r31) + sll r9,8,r9 + bis r8,r9,r8 + lda r8,0x0080(r8) + ldqp r9, 0(r8) // read the MISC register for CPUID - and r9,0x1,r10 // grab LSB and shift left 2 - sll r10,2,r10 - and r9,0x2,r11 // grabl LSB+1 and shift left 5 - sll r11,5,r11 - - mskbl r8,0,r8 // calculate DIRn address - lda r9,0x280(r31) - bis r8,r9,r8 - or r8,r10,r8 - or r8,r11,r8 - ldqp r9, 0(r8) // read DIRn + and r9,0x1,r10 // grab LSB and shift left 2 + sll r10,2,r10 + and r9,0x2,r11 // grabl LSB+1 and shift left 5 + sll r11,5,r11 + + mskbl r8,0,r8 // calculate DIRn address + lda r9,0x280(r31) + bis r8,r9,r8 + or r8,r10,r8 + or r8,r11,r8 + ldqp r9, 0(r8) // read DIRn + + or r31,1,r10 // set bit 55 (ISA Interrupt) + sll r10,55,r10 + + and r9, r10, r10 // check if bit 55 is set + lda r13,0x900(r31) // load offset for normal into r13 + beq r10, normal_int // if not compute the vector normally + + lda r13,0x800(r31) // replace with offset for pic + lda r8,0xf01(r31) // build an addr to access PIC + sll r8,32,r8 // at f01fc000000 + ldah r9,0xfc(r31) + sll r9,8,r9 + bis r8,r9,r8 + ldqp r9,0x0020(r8) // read PIC1 ISR for interrupting dev + +#if 0 // we have a 21164 so this won't work because of the ctlz, if we ever change that... +normal_int: + ctlz r9,r10 // count the number of leading zeros + lda r11,63(r31) + subq r11,r10,r17 // subtract from + + lda r9,0x10(r31) + mulq r17,r9,r17 // compute 0x900 + (0x10 * Highest DIRn-bit) + lda r9,0x900(r31) + addq r17,r9,r17 + + br r31, pal_post_interrupt +#endif - or r31,63,r17 // load 63 into the counter - or r31,1,r11 - sll r11,63,r11 // load a 1 into the msb +normal_int: + or r31,63,r17 // load 63 into the counter + or r31,1,r11 + sll r11,63,r11 // load a 1 into the msb find_msb: - and r9,r11,r10 - bne r10, found_msb + and r9,r11,r10 + bne r10, found_msb srl r11,1,r11 - subl r17,1,r17 - br r31, find_msb + subl r17,1,r17 + br r31, find_msb found_msb: - lda r9,0x10(r31) - mulq r17,r9,r17 // compute 0x900 + (0x10 * Highest DIRn-bit) - lda r9,0x900(r31) - addq r17,r9,r17 - - br r31, pal_post_interrupt - + lda r9,0x10(r31) + mulq r17,r9,r17 // compute offset + (0x10 * Highest DIRn-bit) + addq r17,r13,r17 + + br r31, pal_post_interrupt ALIGN_BRANCH pal_post_dev_interrupt: -- cgit v1.2.3