From ed08dc31babd83c5c4a439b4d189599dfeea33d1 Mon Sep 17 00:00:00 2001 From: Andreas Hansson Date: Mon, 23 Mar 2015 06:57:31 -0400 Subject: tests: Final reclassification of quick regressions A few regressions were still considered long, but finished well within the 180 seconds. They are only a handful (mostly mcf in atomic). --HG-- rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/config.ini => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/config.ini rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/simerr => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/simerr rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/simout => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/simout rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/stats.txt => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/stats.txt rename : tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal => tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/chair.cook.ppm => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/chair.cook.ppm rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/config.ini => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/config.ini rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/mcf.out => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/mcf.out rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/simerr => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/simerr rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/simout => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/simout rename : tests/long/se/10.mcf/ref/arm/linux/simple-atomic/stats.txt => tests/quick/se/10.mcf/ref/arm/linux/simple-atomic/stats.txt rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/chair.cook.ppm => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/chair.cook.ppm rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/config.ini => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/config.ini rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/mcf.out => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/mcf.out rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/simerr => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/simerr rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/simout => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/simout rename : tests/long/se/10.mcf/ref/arm/linux/simple-timing/stats.txt => tests/quick/se/10.mcf/ref/arm/linux/simple-timing/stats.txt rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/config.ini => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/config.ini rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/mcf.out => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/mcf.out rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/simerr => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/simerr rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/simout => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/simout rename : tests/long/se/10.mcf/ref/sparc/linux/simple-atomic/stats.txt => tests/quick/se/10.mcf/ref/sparc/linux/simple-atomic/stats.txt rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/config.ini => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/config.ini rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/mcf.out => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/mcf.out rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/simerr => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/simerr rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/simout => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/simout rename : tests/long/se/10.mcf/ref/x86/linux/simple-atomic/stats.txt => tests/quick/se/10.mcf/ref/x86/linux/simple-atomic/stats.txt rename : tests/long/se/10.mcf/test.py => tests/quick/se/10.mcf/test.py rename : tests/long/se/30.eon/ref/alpha/tru64/simple-atomic/config.ini => tests/quick/se/30.eon/ref/alpha/tru64/simple-atomic/config.ini rename : tests/long/se/30.eon/ref/alpha/tru64/simple-atomic/simerr => tests/quick/se/30.eon/ref/alpha/tru64/simple-atomic/simerr rename : tests/long/se/30.eon/ref/alpha/tru64/simple-atomic/simout => tests/quick/se/30.eon/ref/alpha/tru64/simple-atomic/simout rename : tests/long/se/30.eon/ref/alpha/tru64/simple-atomic/stats.txt => tests/quick/se/30.eon/ref/alpha/tru64/simple-atomic/stats.txt rename : tests/long/se/30.eon/test.py => tests/quick/se/30.eon/test.py --- .../realview-switcheroo-timing/system.terminal | 208 +++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal (limited to 'tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal') diff --git a/tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal b/tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal new file mode 100644 index 000000000..b3be0ec54 --- /dev/null +++ b/tests/quick/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-timing/system.terminal @@ -0,0 +1,208 @@ +Booting Linux on physical CPU 0x0 + Initializing cgroup subsys cpuset + Linux version 3.13.0-rc2 (tony@vamp) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Mon Oct 13 15:09:23 EDT 2014 + Kernel was built at commit id '' + CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d + CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache + Machine model: V2P-CA15 + bootconsole [earlycon0] enabled + Memory policy: Data cache writealloc + kdebugv2m: Following are test values to confirm proper working + kdebugv2m: Ranges 42000000 0 + kdebugv2m: Regs 30000000 1000000 + kdebugv2m: Virtual-Reg f0000000 + kdebugv2m: pci node addr_cells 3 + kdebugv2m: pci node size_cells 2 + kdebugv2m: motherboard addr_cells 2 + On node 0 totalpages: 65536 + free_area_init_node: node 0, pgdat 8072dcc0, node_mem_map 8078f000 + Normal zone: 512 pages used for memmap + Normal zone: 0 pages reserved + Normal zone: 65536 pages, LIFO batch:15 + sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns + PERCPU: Embedded 8 pages/cpu @80996000 s11648 r8192 d12928 u32768 + pcpu-alloc: s11648 r8192 d12928 u32768 alloc=8*4096 + pcpu-alloc: [0] 0 + Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 + Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=256MB root=/dev/sda1 + PID hash table entries: 1024 (order: 0, 4096 bytes) + Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) + Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) + Memory: 235688K/262144K available (5248K kernel code, 249K rwdata, 1540K rodata, 295K init, 368K bss, 26456K reserved, 0K highmem) + Virtual kernel memory layout: + vector : 0xffff0000 - 0xffff1000 ( 4 kB) + fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) + vmalloc : 0x90800000 - 0xff000000 (1768 MB) + lowmem : 0x80000000 - 0x90000000 ( 256 MB) + pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) + modules : 0x7f000000 - 0x7fe00000 ( 14 MB) + .text : 0x80008000 - 0x806a942c (6790 kB) + .init : 0x806aa000 - 0x806f3d80 ( 296 kB) + .data : 0x806f4000 - 0x80732754 ( 250 kB) + .bss : 0x80732754 - 0x8078e9d8 ( 369 kB) + SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 + Preemptible hierarchical RCU implementation. + RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. + NR_IRQS:16 nr_irqs:16 16 + Architected cp15 timer(s) running at 25.16MHz (phys). + sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns + Switching to timer-based delay loop + Console: colour dummy device 80x30 + Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480) + pid_max: default: 32768 minimum: 301 + Mount-cache hash table entries: 512 + CPU: Testing write buffer coherency: ok + CPU0: update cpu_power 1024 + CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 + Setting up static identity map for 0x804fee68 - 0x804fee9c + Brought up 1 CPUs + SMP: Total of 1 processors activated. + CPU: All CPU(s) started in SVC mode. + VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0 + NET: Registered protocol family 16 + DMA: preallocated 256 KiB pool for atomic coherent allocations + of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000 + of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/aaci@040000 + of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/mmci@050000 + of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000 + of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000 + of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000 + of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000 + hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0 + hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0 + hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0 + hw-breakpoint: CPU 0 failed to disable vector catch + Serial: AMBA PL011 UART driver + 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3 + console [ttyAMA0] enabled +console [ttyAMA0] enabled + bootconsole [earlycon0] disabled +bootconsole [earlycon0] disabled + PCI host bridge to bus 0000:00 +pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff] +pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] +pci_bus 0000:00: root bus resource [bus 00-ff] +pci 0000:00:00.0: [8086:1075] type 00 class 0x020000 +pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff] +pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref] +pci 0000:00:01.0: [8086:7111] type 00 class 0x010185 +pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007] +pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003] +pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007] +pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003] +pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f] +pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref] +PCI: bus0: Fast back to back transfers disabled +pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff] +pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref] +pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref] +pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f] +pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017] +pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f] +pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023] +pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027] +pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff] +pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] +PCI map irq: slot 0, pin 1, devslot 0, irq: 68 +PCI map irq: slot 1, pin 2, devslot 1, irq: 69 +bio: create slab at 0 +vgaarb: loaded +SCSI subsystem initialized +libata version 3.00 loaded. +usbcore: registered new interface driver usbfs +usbcore: registered new interface driver hub +usbcore: registered new device driver usb +pps_core: LinuxPPS API ver. 1 registered +pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti +PTP clock support registered +Advanced Linux Sound Architecture Driver Initialized. +Switched to clocksource arch_sys_counter +NET: Registered protocol family 2 +TCP established hash table entries: 2048 (order: 1, 8192 bytes) +TCP bind hash table entries: 2048 (order: 2, 16384 bytes) +TCP: Hash tables configured (established 2048 bind 2048) +TCP: reno registered +UDP hash table entries: 256 (order: 1, 8192 bytes) +UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) +NET: Registered protocol family 1 +RPC: Registered named UNIX socket transport module. +RPC: Registered udp transport module. +RPC: Registered tcp transport module. +RPC: Registered tcp NFSv4.1 backchannel transport module. +PCI: CLS 64 bytes, default 64 +hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available +jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. +msgmni has been set to 460 +io scheduler noop registered (default) +brd: module loaded +loop: module loaded +ata_piix 0000:00:01.0: version 2.13 +PCI: enabling device 0000:00:01.0 (0040 -> 0041) +scsi0 : ata_piix +scsi1 : ata_piix +ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69 +ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69 +e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI +e100: Copyright(c) 1999-2006 Intel Corporation +e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI +e1000: Copyright (c) 1999-2006 Intel Corporation. +PCI: enabling device 0000:00:00.0 (0040 -> 0042) +ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66 +ata1.00: 1048320 sectors, multi 0: LBA +ata1.00: configured for UDMA/33 +scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5 +sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB) +sd 0:0:0:0: [sda] Write Protect is off +sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 +sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA + sda: sda1 +sd 0:0:0:0: Attached scsi generic sg0 type 0 +sd 0:0:0:0: [sda] Attached SCSI disk +e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01 +e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection +e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k +e1000e: Copyright(c) 1999 - 2013 Intel Corporation. +igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k +igb: Copyright (c) 2007-2013 Intel Corporation. +igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k +igbvf: Copyright (c) 2009 - 2012 Intel Corporation. +ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k +ixgbe: Copyright (c) 1999-2013 Intel Corporation. +ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.11.3-k +ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. +ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI +ixgb: Copyright (c) 1999-2008 Intel Corporation. +smsc911x: Driver version 2008-10-21 +smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2 +nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller +nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1 +nxp-isp1760 1b000000.usb: Scratch test failed. +nxp-isp1760 1b000000.usb: can't setup: -19 +nxp-isp1760 1b000000.usb: USB bus 1 deregistered +usbcore: registered new interface driver usb-storage +mousedev: PS/2 mouse device common for all mice +rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0 +usbcore: registered new interface driver usbhid +usbhid: USB HID core driver +ashmem: initialized +logger: created 256K log 'log_main' +logger: created 256K log 'log_events' +logger: created 256K log 'log_radio' +logger: created 256K log 'log_system' +oprofile: using timer interrupt. +TCP: cubic registered +NET: Registered protocol family 10 +NET: Registered protocol family 17 +rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 12:00:00 UTC (1230811200) +ALSA device list: + No soundcards found. +input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0 +input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2 +VFS: Mounted root (ext2 filesystem) on device 8:1. +Freeing unused kernel memory: 292K (806aa000 - 806f3000) + init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST) + starting pid 673, tty '': '/etc/rc.d/rc.local' +warning: can't open /etc/mtab: No such file or directory +Thu Jan 1 12:00:02 UTC 2009 +S: devpts +Thu Jan 1 12:00:02 UTC 2009 -- cgit v1.2.3