From f33bef4e3b9c865ed8febcdcc2244d6838bc0738 Mon Sep 17 00:00:00 2001 From: Matthias Jung Date: Thu, 28 Sep 2017 22:43:02 +0200 Subject: tlm: Elastic Trace Example with L2 Cache Added The SystemC TLM examples already include an example setup for elastic traces. However, in the provided examples the L2 cache is omitted. This patch provides an additionall example, which also includes an L2 cache on the gem5 side. Change-Id: I49e9fa074b60007694abff37663f0400caf72099 Reviewed-on: https://gem5-review.googlesource.com/4900 Reviewed-by: Jason Lowe-Power Reviewed-by: Christian Menard Maintainer: Jason Lowe-Power --- util/tlm/README | 4 + util/tlm/examples/tlm_elastic_slave_with_l2.py | 133 +++++++++++++++++++++++++ 2 files changed, 137 insertions(+) create mode 100644 util/tlm/examples/tlm_elastic_slave_with_l2.py (limited to 'util/tlm') diff --git a/util/tlm/README b/util/tlm/README index 6fd353cb0..69fda0b89 100644 --- a/util/tlm/README +++ b/util/tlm/README @@ -184,6 +184,10 @@ Similar to IV. the simulation can be set up with this command: > ../../build/ARM/gem5.opt ./conf/tlm_elastic_slave.py +or + +> ../../build/ARM/gem5.opt ./conf/tlm_elastic_slave_with_l2.py + Then: > build/examples/slave_port/gem5.sc m5out/config.ini diff --git a/util/tlm/examples/tlm_elastic_slave_with_l2.py b/util/tlm/examples/tlm_elastic_slave_with_l2.py new file mode 100644 index 000000000..492f9993e --- /dev/null +++ b/util/tlm/examples/tlm_elastic_slave_with_l2.py @@ -0,0 +1,133 @@ +# Copyright (c) 2016, University of Kaiserslautern +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# 1. Redistributions of source code must retain the above copyright notice, +# this list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER +# OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: Matthias Jung + +import m5 +import optparse + +from m5.objects import * +from m5.util import addToPath, fatal + +addToPath('../../../configs/common/') + +from Caches import * + +# This configuration shows a simple setup of a Elastic Trace Player (eTraceCPU) +# and an external TLM port for SystemC co-simulation. +# +# We assume a DRAM size of 512MB and L1 cache sizes of 32KB and an L2 cache +# size of 1MB. +# +# Base System Architecture: +# +# +-----------+ ^ +# +-------------+ | eTraceCPU | | +# | System Port | +-----+-----+ | +# +------+------+ | $D1 | $I1 | | +# | +--+--+--+--+ | +# | | | | gem5 World (see this file) +# | +--v-----v--+ | +# | | toL2Bus | | +# | +-----+-----+ | +# | | | +# | +-----v-----+ | +# | | L2 | | +# | +-----+-----+ | +# | | | +# +------v---------------v-----+ | +# | Membus | v +# +----------------+-----------+ External Port (see sc_port.*) +# | ^ +# +---v---+ | TLM World +# | TLM | | (see sc_target.*) +# +-------+ v +# +# +# Create a system with a Crossbar and an Elastic Trace Player as CPU: + +# Setup System: +system = System(cpu=TraceCPU(cpu_id=0), + mem_mode='timing', + mem_ranges = [AddrRange('1024MB')], + cache_line_size = 64) + +# Create a top-level voltage domain: +system.voltage_domain = VoltageDomain() + +# Create a source clock for the system. This is used as the clock period for +# xbar and memory: +system.clk_domain = SrcClockDomain(clock = '1GHz', + voltage_domain = system.voltage_domain) + +# Create a CPU voltage domain: +system.cpu_voltage_domain = VoltageDomain() + +# Create a separate clock domain for the CPUs. In case of Trace CPUs this clock +# is actually used only by the caches connected to the CPU: +system.cpu_clk_domain = SrcClockDomain(clock = '1GHz', + voltage_domain = system.cpu_voltage_domain) + +# Setup CPU and its L1 caches: +system.cpu.createInterruptController() +system.cpu.icache = L1_ICache(size="32kB") +system.cpu.dcache = L1_DCache(size="32kB") +system.cpu.icache.cpu_side = system.cpu.icache_port +system.cpu.dcache.cpu_side = system.cpu.dcache_port + +# Assign input trace files to the eTraceCPU: +system.cpu.instTraceFile="system.cpu.traceListener.inst.gz" +system.cpu.dataTraceFile="system.cpu.traceListener.data.gz" + +# Setting up L1 BUS: +system.tol2bus = L2XBar() +system.l2cache = L2Cache(size="1MB") +system.physmem = SimpleMemory() # This must be instantiated, even if not needed + +# Create a external TLM port: +system.tlm = ExternalSlave() +system.tlm.addr_ranges = [AddrRange('4096MB')] +system.tlm.port_type = "tlm_slave" +system.tlm.port_data = "transactor1" + +# Connect everything: +system.membus = SystemXBar() +system.system_port = system.membus.slave +system.cpu.icache.mem_side = system.tol2bus.slave +system.cpu.dcache.mem_side = system.tol2bus.slave +system.tol2bus.master = system.l2cache.cpu_side +system.l2cache.mem_side = system.membus.slave +system.membus.master = system.tlm.port + +# Start the simulation: +root = Root(full_system = False, system = system) +root.system.mem_mode = 'timing' +m5.instantiate() +m5.simulate() # Simulation time specified later on commandline -- cgit v1.2.3