diff options
Diffstat (limited to 'core/src/fxcodec/libjpeg/jpeglib.h')
| -rw-r--r-- | core/src/fxcodec/libjpeg/jpeglib.h | 1165 |
1 files changed, 0 insertions, 1165 deletions
diff --git a/core/src/fxcodec/libjpeg/jpeglib.h b/core/src/fxcodec/libjpeg/jpeglib.h deleted file mode 100644 index 7de5ab726e..0000000000 --- a/core/src/fxcodec/libjpeg/jpeglib.h +++ /dev/null @@ -1,1165 +0,0 @@ -/* - * jpeglib.h - * - * Copyright (C) 1991-1998, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file defines the application interface for the JPEG library. - * Most applications using the library need only include this file, - * and perhaps jerror.h if they want to know the exact error codes. - */ - -#ifndef JPEGLIB_H -#define JPEGLIB_H - -#define FOXIT_PREFIX(origName) FPDFAPIJPEG_##origName - -#define jcopy_block_row FOXIT_PREFIX(jcopy_block_row) -#define jcopy_sample_rows FOXIT_PREFIX(jcopy_sample_rows) -#define jdiv_round_up FOXIT_PREFIX(jdiv_round_up) -#define jinit_1pass_quantizer FOXIT_PREFIX(jinit_1pass_quantizer) -#define jinit_2pass_quantizer FOXIT_PREFIX(jinit_2pass_quantizer) -#define jinit_color_deconverter FOXIT_PREFIX(jinit_color_deconverter) -#define jinit_d_coef_controller FOXIT_PREFIX(jinit_d_coef_controller) -#define jinit_d_main_controller FOXIT_PREFIX(jinit_d_main_controller) -#define jinit_d_post_controller FOXIT_PREFIX(jinit_d_post_controller) -#define jinit_huff_decoder FOXIT_PREFIX(jinit_huff_decoder) -#define jinit_input_controller FOXIT_PREFIX(jinit_input_controller) -#define jinit_inverse_dct FOXIT_PREFIX(jinit_inverse_dct) -#define jinit_marker_reader FOXIT_PREFIX(jinit_marker_reader) -#define jinit_master_decompress FOXIT_PREFIX(jinit_master_decompress) -#define jinit_memory_mgr FOXIT_PREFIX(jinit_memory_mgr) -#define jinit_merged_upsampler FOXIT_PREFIX(jinit_merged_upsampler) -#define jinit_phuff_decoder FOXIT_PREFIX(jinit_phuff_decoder) -#define jinit_upsampler FOXIT_PREFIX(jinit_upsampler) -#define jpeg_CreateDecompress FOXIT_PREFIX(jpeg_CreateDecompress) -#define jpeg_abort FOXIT_PREFIX(jpeg_abort) -#define jpeg_abort_decompress FOXIT_PREFIX(jpeg_abort_decompress) -#define jpeg_alloc_huff_table FOXIT_PREFIX(jpeg_alloc_huff_table) -#define jpeg_alloc_quant_table FOXIT_PREFIX(jpeg_alloc_quant_table) -#define jpeg_calc_output_dimensions FOXIT_PREFIX(jpeg_calc_output_dimensions) -#define jpeg_consume_input FOXIT_PREFIX(jpeg_consume_input) -#define jpeg_destroy FOXIT_PREFIX(jpeg_destroy) -#define jpeg_destroy_decompress FOXIT_PREFIX(jpeg_destroy_decompress) -#define jpeg_fill_bit_buffer FOXIT_PREFIX(jpeg_fill_bit_buffer) -#define jpeg_finish_decompress FOXIT_PREFIX(jpeg_finish_decompress) -#define jpeg_finish_output FOXIT_PREFIX(jpeg_finish_output) -#define jpeg_free_large FOXIT_PREFIX(jpeg_free_large) -#define jpeg_free_small FOXIT_PREFIX(jpeg_free_small) -#define jpeg_get_large FOXIT_PREFIX(jpeg_get_large) -#define jpeg_get_small FOXIT_PREFIX(jpeg_get_small) -#define jpeg_has_multiple_scans FOXIT_PREFIX(jpeg_has_multiple_scans) -#define jpeg_huff_decode FOXIT_PREFIX(jpeg_huff_decode) -#define jpeg_idct_1x1 FOXIT_PREFIX(jpeg_idct_1x1) -#define jpeg_idct_2x2 FOXIT_PREFIX(jpeg_idct_2x2) -#define jpeg_idct_4x4 FOXIT_PREFIX(jpeg_idct_4x4) -#define jpeg_idct_float FOXIT_PREFIX(jpeg_idct_float) -#define jpeg_idct_ifast FOXIT_PREFIX(jpeg_idct_ifast) -#define jpeg_idct_islow FOXIT_PREFIX(jpeg_idct_islow) -#define jpeg_input_complete FOXIT_PREFIX(jpeg_input_complete) -#define jpeg_make_d_derived_tbl FOXIT_PREFIX(jpeg_make_d_derived_tbl) -#define jpeg_mem_available FOXIT_PREFIX(jpeg_mem_available) -#define jpeg_mem_init FOXIT_PREFIX(jpeg_mem_init) -#define jpeg_mem_term FOXIT_PREFIX(jpeg_mem_term) -#define jpeg_natural_order FOXIT_PREFIX(jpeg_natural_order) -#define jpeg_new_colormap FOXIT_PREFIX(jpeg_new_colormap) -#define jpeg_open_backing_store FOXIT_PREFIX(jpeg_open_backing_store) -#define jpeg_read_coefficients FOXIT_PREFIX(jpeg_read_coefficients) -#define jpeg_read_header FOXIT_PREFIX(jpeg_read_header) -#define jpeg_read_raw_data FOXIT_PREFIX(jpeg_read_raw_data) -#define jpeg_read_scanlines FOXIT_PREFIX(jpeg_read_scanlines) -#define jpeg_resync_to_restart FOXIT_PREFIX(jpeg_resync_to_restart) -#define jpeg_save_markers FOXIT_PREFIX(jpeg_save_markers) -#define jpeg_set_marker_processor FOXIT_PREFIX(jpeg_set_marker_processor) -#define jpeg_start_decompress FOXIT_PREFIX(jpeg_start_decompress) -#define jpeg_start_output FOXIT_PREFIX(jpeg_start_output) -#define jpeg_std_error FOXIT_PREFIX(jpeg_std_error) -#define jpeg_std_message_table FOXIT_PREFIX(jpeg_std_message_table) -#define jpeg_stdio_src FOXIT_PREFIX(jpeg_stdio_src) -#define jround_up FOXIT_PREFIX(jround_up) -#define jzero_far FOXIT_PREFIX(jzero_far) - - /* - * First we include the configuration files that record how this - * installation of the JPEG library is set up. jconfig.h can be - * generated automatically for many systems. jmorecfg.h contains - * manual configuration options that most people need not worry about. - */ - -#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ -#include "jconfig.h" /* widely used configuration options */ -#endif -#include "jmorecfg.h" /* seldom changed options */ - - -/* Version ID for the JPEG library. - * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60". - */ - -#define JPEG_LIB_VERSION 62 /* Version 6b */ - - -/* Various constants determining the sizes of things. - * All of these are specified by the JPEG standard, so don't change them - * if you want to be compatible. - */ - -#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ -#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ -#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ -#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ -#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ -#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ -#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ -/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; - * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. - * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU - * to handle it. We even let you do this from the jconfig.h file. However, - * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe - * sometimes emits noncompliant files doesn't mean you should too. - */ -#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ -#ifndef D_MAX_BLOCKS_IN_MCU -#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ -#endif - - -/* Data structures for images (arrays of samples and of DCT coefficients). - * On 80x86 machines, the image arrays are too big for near pointers, - * but the pointer arrays can fit in near memory. - */ - -typedef JSAMPLE *JSAMPROW; /* ptr to one image row of pixel samples. */ -typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ -typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ - -typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ -typedef JBLOCK *JBLOCKROW; /* pointer to one row of coefficient blocks */ -typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ -typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ - -typedef JCOEF *JCOEFPTR; /* useful in a couple of places */ - - -/* Types for JPEG compression parameters and working tables. */ - - -/* DCT coefficient quantization tables. */ - -typedef struct { - /* This array gives the coefficient quantizers in natural array order - * (not the zigzag order in which they are stored in a JPEG DQT marker). - * CAUTION: IJG versions prior to v6a kept this array in zigzag order. - */ - UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JQUANT_TBL; - - -/* Huffman coding tables. */ - -typedef struct { - /* These two fields directly represent the contents of a JPEG DHT marker */ - UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ - /* length k bits; bits[0] is unused */ - UINT8 huffval[256]; /* The symbols, in order of incr code length */ - /* This field is used only during compression. It's initialized FALSE when - * the table is created, and set TRUE when it's been output to the file. - * You could suppress output of a table by setting this to TRUE. - * (See jpeg_suppress_tables for an example.) - */ - boolean sent_table; /* TRUE when table has been output */ -} JHUFF_TBL; - - -/* Basic info about one component (color channel). */ - -typedef struct { - /* These values are fixed over the whole image. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOF marker. */ - int component_id; /* identifier for this component (0..255) */ - int component_index; /* its index in SOF or cinfo->comp_info[] */ - int h_samp_factor; /* horizontal sampling factor (1..4) */ - int v_samp_factor; /* vertical sampling factor (1..4) */ - int quant_tbl_no; /* quantization table selector (0..3) */ - /* These values may vary between scans. */ - /* For compression, they must be supplied by parameter setup; */ - /* for decompression, they are read from the SOS marker. */ - /* The decompressor output side may not use these variables. */ - int dc_tbl_no; /* DC entropy table selector (0..3) */ - int ac_tbl_no; /* AC entropy table selector (0..3) */ - - /* Remaining fields should be treated as private by applications. */ - - /* These values are computed during compression or decompression startup: */ - /* Component's size in DCT blocks. - * Any dummy blocks added to complete an MCU are not counted; therefore - * these values do not depend on whether a scan is interleaved or not. - */ - JDIMENSION width_in_blocks; - JDIMENSION height_in_blocks; - /* Size of a DCT block in samples. Always DCTSIZE for compression. - * For decompression this is the size of the output from one DCT block, - * reflecting any scaling we choose to apply during the IDCT step. - * Values of 1,2,4,8 are likely to be supported. Note that different - * components may receive different IDCT scalings. - */ - int DCT_scaled_size; - /* The downsampled dimensions are the component's actual, unpadded number - * of samples at the main buffer (preprocessing/compression interface), thus - * downsampled_width = ceil(image_width * Hi/Hmax) - * and similarly for height. For decompression, IDCT scaling is included, so - * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE) - */ - JDIMENSION downsampled_width; /* actual width in samples */ - JDIMENSION downsampled_height; /* actual height in samples */ - /* This flag is used only for decompression. In cases where some of the - * components will be ignored (eg grayscale output from YCbCr image), - * we can skip most computations for the unused components. - */ - boolean component_needed; /* do we need the value of this component? */ - - /* These values are computed before starting a scan of the component. */ - /* The decompressor output side may not use these variables. */ - int MCU_width; /* number of blocks per MCU, horizontally */ - int MCU_height; /* number of blocks per MCU, vertically */ - int MCU_blocks; /* MCU_width * MCU_height */ - int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_scaled_size */ - int last_col_width; /* # of non-dummy blocks across in last MCU */ - int last_row_height; /* # of non-dummy blocks down in last MCU */ - - /* Saved quantization table for component; NULL if none yet saved. - * See jdinput.c comments about the need for this information. - * This field is currently used only for decompression. - */ - JQUANT_TBL * quant_table; - - /* Private per-component storage for DCT or IDCT subsystem. */ - void * dct_table; -} jpeg_component_info; - - -/* The script for encoding a multiple-scan file is an array of these: */ - -typedef struct { - int comps_in_scan; /* number of components encoded in this scan */ - int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ - int Ss, Se; /* progressive JPEG spectral selection parms */ - int Ah, Al; /* progressive JPEG successive approx. parms */ -} jpeg_scan_info; - -/* The decompressor can save APPn and COM markers in a list of these: */ - -typedef struct jpeg_marker_struct * jpeg_saved_marker_ptr; - -struct jpeg_marker_struct { - jpeg_saved_marker_ptr next; /* next in list, or NULL */ - UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ - unsigned int original_length; /* # bytes of data in the file */ - unsigned int data_length; /* # bytes of data saved at data[] */ - JOCTET * data; /* the data contained in the marker */ - /* the marker length word is not counted in data_length or original_length */ -}; - -/* Known color spaces. */ - -typedef enum { - JCS_UNKNOWN, /* error/unspecified */ - JCS_GRAYSCALE, /* monochrome */ - JCS_RGB, /* red/green/blue */ - JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ - JCS_CMYK, /* C/M/Y/K */ - JCS_YCCK /* Y/Cb/Cr/K */ -} J_COLOR_SPACE; - -/* DCT/IDCT algorithm options. */ - -typedef enum { - JDCT_ISLOW, /* slow but accurate integer algorithm */ - JDCT_IFAST, /* faster, less accurate integer method */ - JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ -} J_DCT_METHOD; - -#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ -#define JDCT_DEFAULT JDCT_ISLOW -#endif -#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ -#define JDCT_FASTEST JDCT_IFAST -#endif - -/* Dithering options for decompression. */ - -typedef enum { - JDITHER_NONE, /* no dithering */ - JDITHER_ORDERED, /* simple ordered dither */ - JDITHER_FS /* Floyd-Steinberg error diffusion dither */ -} J_DITHER_MODE; - - -/* Common fields between JPEG compression and decompression master structs. */ - -#define jpeg_common_fields \ - struct jpeg_error_mgr * err; /* Error handler module */\ - struct jpeg_memory_mgr * mem; /* Memory manager module */\ - struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ - void * client_data; /* Available for use by application */\ - boolean is_decompressor; /* So common code can tell which is which */\ - int global_state /* For checking call sequence validity */ - -/* Routines that are to be used by both halves of the library are declared - * to receive a pointer to this structure. There are no actual instances of - * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. - */ -struct jpeg_common_struct { - jpeg_common_fields; /* Fields common to both master struct types */ - /* Additional fields follow in an actual jpeg_compress_struct or - * jpeg_decompress_struct. All three structs must agree on these - * initial fields! (This would be a lot cleaner in C++.) - */ -}; - -typedef struct jpeg_common_struct * j_common_ptr; -typedef struct jpeg_compress_struct * j_compress_ptr; -typedef struct jpeg_decompress_struct * j_decompress_ptr; - - -/* Master record for a compression instance */ - -struct jpeg_compress_struct { - jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ - - /* Destination for compressed data */ - struct jpeg_destination_mgr * dest; - - /* Description of source image --- these fields must be filled in by - * outer application before starting compression. in_color_space must - * be correct before you can even call jpeg_set_defaults(). - */ - - JDIMENSION image_width; /* input image width */ - JDIMENSION image_height; /* input image height */ - int input_components; /* # of color components in input image */ - J_COLOR_SPACE in_color_space; /* colorspace of input image */ - - double input_gamma; /* image gamma of input image */ - - /* Compression parameters --- these fields must be set before calling - * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to - * initialize everything to reasonable defaults, then changing anything - * the application specifically wants to change. That way you won't get - * burnt when new parameters are added. Also note that there are several - * helper routines to simplify changing parameters. - */ - - int data_precision; /* bits of precision in image data */ - - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - int num_scans; /* # of entries in scan_info array */ - const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ - /* The default value of scan_info is NULL, which causes a single-scan - * sequential JPEG file to be emitted. To create a multi-scan file, - * set num_scans and scan_info to point to an array of scan definitions. - */ - - boolean raw_data_in; /* TRUE=caller supplies downsampled data */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - int smoothing_factor; /* 1..100, or 0 for no input smoothing */ - J_DCT_METHOD dct_method; /* DCT algorithm selector */ - - /* The restart interval can be specified in absolute MCUs by setting - * restart_interval, or in MCU rows by setting restart_in_rows - * (in which case the correct restart_interval will be figured - * for each scan). - */ - unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ - int restart_in_rows; /* if > 0, MCU rows per restart interval */ - - /* Parameters controlling emission of special markers. */ - - boolean write_JFIF_header; /* should a JFIF marker be written? */ - UINT8 JFIF_major_version; /* What to write for the JFIF version number */ - UINT8 JFIF_minor_version; - /* These three values are not used by the JPEG code, merely copied */ - /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ - /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ - /* ratio is defined by X_density/Y_density even when density_unit=0. */ - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean write_Adobe_marker; /* should an Adobe marker be written? */ - - /* State variable: index of next scanline to be written to - * jpeg_write_scanlines(). Application may use this to control its - * processing loop, e.g., "while (next_scanline < image_height)". - */ - - JDIMENSION next_scanline; /* 0 .. image_height-1 */ - - /* Remaining fields are known throughout compressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during compression startup - */ - boolean progressive_mode; /* TRUE if scan script uses progressive mode */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ - /* The coefficient controller receives data in units of MCU rows as defined - * for fully interleaved scans (whether the JPEG file is interleaved or not). - * There are v_samp_factor * DCTSIZE sample rows of each component in an - * "iMCU" (interleaved MCU) row. - */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[C_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* - * Links to compression subobjects (methods and private variables of modules) - */ - struct jpeg_comp_master * master; - struct jpeg_c_main_controller * main; - struct jpeg_c_prep_controller * prep; - struct jpeg_c_coef_controller * coef; - struct jpeg_marker_writer * marker; - struct jpeg_color_converter * cconvert; - struct jpeg_downsampler * downsample; - struct jpeg_forward_dct * fdct; - struct jpeg_entropy_encoder * entropy; - jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ - int script_space_size; -}; - - -/* Master record for a decompression instance */ - -struct jpeg_decompress_struct { - jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ - - /* Source of compressed data */ - struct jpeg_source_mgr * src; - - /* Basic description of image --- filled in by jpeg_read_header(). */ - /* Application may inspect these values to decide how to process image. */ - - JDIMENSION image_width; /* nominal image width (from SOF marker) */ - JDIMENSION image_height; /* nominal image height */ - int num_components; /* # of color components in JPEG image */ - J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ - - /* Decompression processing parameters --- these fields must be set before - * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes - * them to default values. - */ - - J_COLOR_SPACE out_color_space; /* colorspace for output */ - - unsigned int scale_num, scale_denom; /* fraction by which to scale image */ - - double output_gamma; /* image gamma wanted in output */ - - boolean buffered_image; /* TRUE=multiple output passes */ - boolean raw_data_out; /* TRUE=downsampled data wanted */ - - J_DCT_METHOD dct_method; /* IDCT algorithm selector */ - boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ - boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ - - boolean quantize_colors; /* TRUE=colormapped output wanted */ - /* the following are ignored if not quantize_colors: */ - J_DITHER_MODE dither_mode; /* type of color dithering to use */ - boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ - int desired_number_of_colors; /* max # colors to use in created colormap */ - /* these are significant only in buffered-image mode: */ - boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ - boolean enable_external_quant;/* enable future use of external colormap */ - boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ - - /* Description of actual output image that will be returned to application. - * These fields are computed by jpeg_start_decompress(). - * You can also use jpeg_calc_output_dimensions() to determine these values - * in advance of calling jpeg_start_decompress(). - */ - - JDIMENSION output_width; /* scaled image width */ - JDIMENSION output_height; /* scaled image height */ - int out_color_components; /* # of color components in out_color_space */ - int output_components; /* # of color components returned */ - /* output_components is 1 (a colormap index) when quantizing colors; - * otherwise it equals out_color_components. - */ - int rec_outbuf_height; /* min recommended height of scanline buffer */ - /* If the buffer passed to jpeg_read_scanlines() is less than this many rows - * high, space and time will be wasted due to unnecessary data copying. - * Usually rec_outbuf_height will be 1 or 2, at most 4. - */ - - /* When quantizing colors, the output colormap is described by these fields. - * The application can supply a colormap by setting colormap non-NULL before - * calling jpeg_start_decompress; otherwise a colormap is created during - * jpeg_start_decompress or jpeg_start_output. - * The map has out_color_components rows and actual_number_of_colors columns. - */ - int actual_number_of_colors; /* number of entries in use */ - JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ - - /* State variables: these variables indicate the progress of decompression. - * The application may examine these but must not modify them. - */ - - /* Row index of next scanline to be read from jpeg_read_scanlines(). - * Application may use this to control its processing loop, e.g., - * "while (output_scanline < output_height)". - */ - JDIMENSION output_scanline; /* 0 .. output_height-1 */ - - /* Current input scan number and number of iMCU rows completed in scan. - * These indicate the progress of the decompressor input side. - */ - int input_scan_number; /* Number of SOS markers seen so far */ - JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ - - /* The "output scan number" is the notional scan being displayed by the - * output side. The decompressor will not allow output scan/row number - * to get ahead of input scan/row, but it can fall arbitrarily far behind. - */ - int output_scan_number; /* Nominal scan number being displayed */ - JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ - - /* Current progression status. coef_bits[c][i] indicates the precision - * with which component c's DCT coefficient i (in zigzag order) is known. - * It is -1 when no data has yet been received, otherwise it is the point - * transform (shift) value for the most recent scan of the coefficient - * (thus, 0 at completion of the progression). - * This pointer is NULL when reading a non-progressive file. - */ - int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ - - /* Internal JPEG parameters --- the application usually need not look at - * these fields. Note that the decompressor output side may not use - * any parameters that can change between scans. - */ - - /* Quantization and Huffman tables are carried forward across input - * datastreams when processing abbreviated JPEG datastreams. - */ - - JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; - /* ptrs to coefficient quantization tables, or NULL if not defined */ - - JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; - JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; - /* ptrs to Huffman coding tables, or NULL if not defined */ - - /* These parameters are never carried across datastreams, since they - * are given in SOF/SOS markers or defined to be reset by SOI. - */ - - int data_precision; /* bits of precision in image data */ - - jpeg_component_info * comp_info; - /* comp_info[i] describes component that appears i'th in SOF */ - - boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ - boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ - - UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ - UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ - UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ - - unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ - - /* These fields record data obtained from optional markers recognized by - * the JPEG library. - */ - boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ - /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ - UINT8 JFIF_major_version; /* JFIF version number */ - UINT8 JFIF_minor_version; - UINT8 density_unit; /* JFIF code for pixel size units */ - UINT16 X_density; /* Horizontal pixel density */ - UINT16 Y_density; /* Vertical pixel density */ - boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ - UINT8 Adobe_transform; /* Color transform code from Adobe marker */ - - boolean CCIR601_sampling; /* TRUE=first samples are cosited */ - - /* Aside from the specific data retained from APPn markers known to the - * library, the uninterpreted contents of any or all APPn and COM markers - * can be saved in a list for examination by the application. - */ - jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ - - /* Remaining fields are known throughout decompressor, but generally - * should not be touched by a surrounding application. - */ - - /* - * These fields are computed during decompression startup - */ - int max_h_samp_factor; /* largest h_samp_factor */ - int max_v_samp_factor; /* largest v_samp_factor */ - - int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */ - - JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ - /* The coefficient controller's input and output progress is measured in - * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows - * in fully interleaved JPEG scans, but are used whether the scan is - * interleaved or not. We define an iMCU row as v_samp_factor DCT block - * rows of each component. Therefore, the IDCT output contains - * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row. - */ - - JSAMPLE * sample_range_limit; /* table for fast range-limiting */ - - /* - * These fields are valid during any one scan. - * They describe the components and MCUs actually appearing in the scan. - * Note that the decompressor output side must not use these fields. - */ - int comps_in_scan; /* # of JPEG components in this scan */ - jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; - /* *cur_comp_info[i] describes component that appears i'th in SOS */ - - JDIMENSION MCUs_per_row; /* # of MCUs across the image */ - JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ - - int blocks_in_MCU; /* # of DCT blocks per MCU */ - int MCU_membership[D_MAX_BLOCKS_IN_MCU]; - /* MCU_membership[i] is index in cur_comp_info of component owning */ - /* i'th block in an MCU */ - - int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ - - /* This field is shared between entropy decoder and marker parser. - * It is either zero or the code of a JPEG marker that has been - * read from the data source, but has not yet been processed. - */ - int unread_marker; - - /* - * Links to decompression subobjects (methods, private variables of modules) - */ - struct jpeg_decomp_master * master; - struct jpeg_d_main_controller * main; - struct jpeg_d_coef_controller * coef; - struct jpeg_d_post_controller * post; - struct jpeg_input_controller * inputctl; - struct jpeg_marker_reader * marker; - struct jpeg_entropy_decoder * entropy; - struct jpeg_inverse_dct * idct; - struct jpeg_upsampler * upsample; - struct jpeg_color_deconverter * cconvert; - struct jpeg_color_quantizer * cquantize; -}; - - -/* "Object" declarations for JPEG modules that may be supplied or called - * directly by the surrounding application. - * As with all objects in the JPEG library, these structs only define the - * publicly visible methods and state variables of a module. Additional - * private fields may exist after the public ones. - */ - - -/* Error handler object */ - -struct jpeg_error_mgr { - /* Error exit handler: does not return to caller */ - JMETHOD(void, error_exit, (j_common_ptr cinfo)); - /* Conditionally emit a trace or warning message */ - JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); - /* Routine that actually outputs a trace or error message */ - JMETHOD(void, output_message, (j_common_ptr cinfo)); - /* Format a message string for the most recent JPEG error or message */ - JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); -#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ - /* Reset error state variables at start of a new image */ - JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); - - /* The message ID code and any parameters are saved here. - * A message can have one string parameter or up to 8 int parameters. - */ - int msg_code; -#define JMSG_STR_PARM_MAX 80 - union { - int i[8]; - char s[JMSG_STR_PARM_MAX]; - } msg_parm; - - /* Standard state variables for error facility */ - - int trace_level; /* max msg_level that will be displayed */ - - /* For recoverable corrupt-data errors, we emit a warning message, - * but keep going unless emit_message chooses to abort. emit_message - * should count warnings in num_warnings. The surrounding application - * can check for bad data by seeing if num_warnings is nonzero at the - * end of processing. - */ - long num_warnings; /* number of corrupt-data warnings */ - - /* These fields point to the table(s) of error message strings. - * An application can change the table pointer to switch to a different - * message list (typically, to change the language in which errors are - * reported). Some applications may wish to add additional error codes - * that will be handled by the JPEG library error mechanism; the second - * table pointer is used for this purpose. - * - * First table includes all errors generated by JPEG library itself. - * Error code 0 is reserved for a "no such error string" message. - */ - const char * const * jpeg_message_table; /* Library errors */ - int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ - /* Second table can be added by application (see cjpeg/djpeg for example). - * It contains strings numbered first_addon_message..last_addon_message. - */ - const char * const * addon_message_table; /* Non-library errors */ - int first_addon_message; /* code for first string in addon table */ - int last_addon_message; /* code for last string in addon table */ -}; - - -/* Progress monitor object */ - -struct jpeg_progress_mgr { - JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); - - long pass_counter; /* work units completed in this pass */ - long pass_limit; /* total number of work units in this pass */ - int completed_passes; /* passes completed so far */ - int total_passes; /* total number of passes expected */ -}; - - -/* Data destination object for compression */ - -struct jpeg_destination_mgr { - JOCTET * next_output_byte; /* => next byte to write in buffer */ - size_t free_in_buffer; /* # of byte spaces remaining in buffer */ - - JMETHOD(void, init_destination, (j_compress_ptr cinfo)); - JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); - JMETHOD(void, term_destination, (j_compress_ptr cinfo)); -}; - - -/* Data source object for decompression */ - -struct jpeg_source_mgr { - const JOCTET * next_input_byte; /* => next byte to read from buffer */ - size_t bytes_in_buffer; /* # of bytes remaining in buffer */ - - JMETHOD(void, init_source, (j_decompress_ptr cinfo)); - JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); - JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); - JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); - JMETHOD(void, term_source, (j_decompress_ptr cinfo)); -}; - - -/* Memory manager object. - * Allocates "small" objects (a few K total), "large" objects (tens of K), - * and "really big" objects (virtual arrays with backing store if needed). - * The memory manager does not allow individual objects to be freed; rather, - * each created object is assigned to a pool, and whole pools can be freed - * at once. This is faster and more convenient than remembering exactly what - * to free, especially where malloc()/free() are not too speedy. - * NB: alloc routines never return NULL. They exit to error_exit if not - * successful. - */ - -#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ -#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ -#define JPOOL_NUMPOOLS 2 - -typedef struct jvirt_sarray_control * jvirt_sarray_ptr; -typedef struct jvirt_barray_control * jvirt_barray_ptr; - - -struct jpeg_memory_mgr { - /* Method pointers */ - JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(void *, alloc_large, (j_common_ptr cinfo, int pool_id, - size_t sizeofobject)); - JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, - JDIMENSION samplesperrow, - JDIMENSION numrows)); - JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, - JDIMENSION blocksperrow, - JDIMENSION numrows)); - JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION samplesperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, - int pool_id, - boolean pre_zero, - JDIMENSION blocksperrow, - JDIMENSION numrows, - JDIMENSION maxaccess)); - JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); - JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, - jvirt_sarray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, - jvirt_barray_ptr ptr, - JDIMENSION start_row, - JDIMENSION num_rows, - boolean writable)); - JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); - JMETHOD(void, self_destruct, (j_common_ptr cinfo)); - - /* Limit on memory allocation for this JPEG object. (Note that this is - * merely advisory, not a guaranteed maximum; it only affects the space - * used for virtual-array buffers.) May be changed by outer application - * after creating the JPEG object. - */ - long max_memory_to_use; - - /* Maximum allocation request accepted by alloc_large. */ - long max_alloc_chunk; -}; - - -/* Routine signature for application-supplied marker processing methods. - * Need not pass marker code since it is stored in cinfo->unread_marker. - */ -typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); - - -/* Declarations for routines called by application. - * The JPP macro hides prototype parameters from compilers that can't cope. - * Note JPP requires double parentheses. - */ - -#ifdef HAVE_PROTOTYPES -#define JPP(arglist) arglist -#else -#define JPP(arglist) () -#endif - - -/* Short forms of external names for systems with brain-damaged linkers. - * We shorten external names to be unique in the first six letters, which - * is good enough for all known systems. - * (If your compiler itself needs names to be unique in less than 15 - * characters, you are out of luck. Get a better compiler.) - */ - -#ifdef NEED_SHORT_EXTERNAL_NAMES -#define jpeg_std_error jStdError -#define jpeg_CreateCompress jCreaCompress -#define jpeg_CreateDecompress jCreaDecompress -#define jpeg_destroy_compress jDestCompress -#define jpeg_destroy_decompress jDestDecompress -#define jpeg_stdio_dest jStdDest -#define jpeg_stdio_src jStdSrc -#define jpeg_set_defaults jSetDefaults -#define jpeg_set_colorspace jSetColorspace -#define jpeg_default_colorspace jDefColorspace -#define jpeg_set_quality jSetQuality -#define jpeg_set_linear_quality jSetLQuality -#define jpeg_add_quant_table jAddQuantTable -#define jpeg_quality_scaling jQualityScaling -#define jpeg_simple_progression jSimProgress -#define jpeg_suppress_tables jSuppressTables -#define jpeg_alloc_quant_table jAlcQTable -#define jpeg_alloc_huff_table jAlcHTable -#define jpeg_start_compress jStrtCompress -#define jpeg_write_scanlines jWrtScanlines -#define jpeg_finish_compress jFinCompress -#define jpeg_write_raw_data jWrtRawData -#define jpeg_write_marker jWrtMarker -#define jpeg_write_m_header jWrtMHeader -#define jpeg_write_m_byte jWrtMByte -#define jpeg_write_tables jWrtTables -#define jpeg_read_header jReadHeader -#define jpeg_start_decompress jStrtDecompress -#define jpeg_read_scanlines jReadScanlines -#define jpeg_finish_decompress jFinDecompress -#define jpeg_read_raw_data jReadRawData -#define jpeg_has_multiple_scans jHasMultScn -#define jpeg_start_output jStrtOutput -#define jpeg_finish_output jFinOutput -#define jpeg_input_complete jInComplete -#define jpeg_new_colormap jNewCMap -#define jpeg_consume_input jConsumeInput -#define jpeg_calc_output_dimensions jCalcDimensions -#define jpeg_save_markers jSaveMarkers -#define jpeg_set_marker_processor jSetMarker -#define jpeg_read_coefficients jReadCoefs -#define jpeg_write_coefficients jWrtCoefs -#define jpeg_copy_critical_parameters jCopyCrit -#define jpeg_abort_compress jAbrtCompress -#define jpeg_abort_decompress jAbrtDecompress -#define jpeg_abort jAbort -#define jpeg_destroy jDestroy -#define jpeg_resync_to_restart jResyncRestart -#endif /* NEED_SHORT_EXTERNAL_NAMES */ - - -/* Default error-management setup */ -EXTERN(struct jpeg_error_mgr *) jpeg_std_error - JPP((struct jpeg_error_mgr * err)); - -/* Initialization of JPEG compression objects. - * jpeg_create_compress() and jpeg_create_decompress() are the exported - * names that applications should call. These expand to calls on - * jpeg_CreateCompress and jpeg_CreateDecompress with additional information - * passed for version mismatch checking. - * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. - */ -#define jpeg_create_compress(cinfo) \ - jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ - (size_t) sizeof(struct jpeg_compress_struct)) -#define jpeg_create_decompress(cinfo) \ - jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ - (size_t) sizeof(struct jpeg_decompress_struct)) -EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, - int version, size_t structsize)); -EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, - int version, size_t structsize)); -/* Destruction of JPEG compression objects */ -EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); - -#if 0 -/* Standard data source and destination managers: stdio streams. */ -/* Caller is responsible for opening the file before and closing after. */ -EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FXSYS_FILE * outfile)); -EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FXSYS_FILE * infile)); -#endif - -/* Default parameter setup for compression */ -EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); -/* Compression parameter setup aids */ -EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, - J_COLOR_SPACE colorspace)); -EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, - boolean force_baseline)); -EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, - int scale_factor, - boolean force_baseline)); -EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, - const unsigned int *basic_table, - int scale_factor, - boolean force_baseline)); -EXTERN(int) jpeg_quality_scaling JPP((int quality)); -EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, - boolean suppress)); -EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); -EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); - -/* Main entry points for compression */ -EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, - boolean write_all_tables)); -EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION num_lines)); -EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); - -/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ -EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION num_lines)); - -/* Write a special marker. See libjpeg.doc concerning safe usage. */ -EXTERN(void) jpeg_write_marker - JPP((j_compress_ptr cinfo, int marker, - const JOCTET * dataptr, unsigned int datalen)); -/* Same, but piecemeal. */ -EXTERN(void) jpeg_write_m_header - JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); -EXTERN(void) jpeg_write_m_byte - JPP((j_compress_ptr cinfo, int val)); - -/* Alternate compression function: just write an abbreviated table file */ -EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); - -/* Decompression startup: read start of JPEG datastream to see what's there */ -EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, - boolean require_image)); -/* Return value is one of: */ -#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ -#define JPEG_HEADER_OK 1 /* Found valid image datastream */ -#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ -/* If you pass require_image = TRUE (normal case), you need not check for - * a TABLES_ONLY return code; an abbreviated file will cause an error exit. - * JPEG_SUSPENDED is only possible if you use a data source module that can - * give a suspension return (the stdio source module doesn't). - */ - -/* Main entry points for decompression */ -EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); -EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, - JSAMPARRAY scanlines, - JDIMENSION max_lines)); -EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); - -/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ -EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, - JSAMPIMAGE data, - JDIMENSION max_lines)); - -/* Additional entry points for buffered-image mode. */ -EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); -EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, - int scan_number)); -EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); -EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); -EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); -EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); -/* Return value is one of: */ -/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ -#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ -#define JPEG_REACHED_EOI 2 /* Reached end of image */ -#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ -#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ - -/* Precalculate output dimensions for current decompression parameters. */ -EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); - -/* Control saving of COM and APPn markers into marker_list. */ -EXTERN(void) jpeg_save_markers - JPP((j_decompress_ptr cinfo, int marker_code, - unsigned int length_limit)); - -/* Install a special processing method for COM or APPn markers. */ -EXTERN(void) jpeg_set_marker_processor - JPP((j_decompress_ptr cinfo, int marker_code, - jpeg_marker_parser_method routine)); - -/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ -EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); -EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, - jvirt_barray_ptr * coef_arrays)); -EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, - j_compress_ptr dstinfo)); - -/* If you choose to abort compression or decompression before completing - * jpeg_finish_(de)compress, then you need to clean up to release memory, - * temporary files, etc. You can just call jpeg_destroy_(de)compress - * if you're done with the JPEG object, but if you want to clean it up and - * reuse it, call this: - */ -EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); -EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); - -/* Generic versions of jpeg_abort and jpeg_destroy that work on either - * flavor of JPEG object. These may be more convenient in some places. - */ -EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); -EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); - -/* Default restart-marker-resync procedure for use by data source modules */ -EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, - int desired)); - - -/* These marker codes are exported since applications and data source modules - * are likely to want to use them. - */ - -#define JPEG_RST0 0xD0 /* RST0 marker code */ -#define JPEG_EOI 0xD9 /* EOI marker code */ -#define JPEG_APP0 0xE0 /* APP0 marker code */ -#define JPEG_COM 0xFE /* COM marker code */ - - -/* If we have a brain-damaged compiler that emits warnings (or worse, errors) - * for structure definitions that are never filled in, keep it quiet by - * supplying dummy definitions for the various substructures. - */ - -#ifdef INCOMPLETE_TYPES_BROKEN -#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ -struct jvirt_sarray_control { long dummy; }; -struct jvirt_barray_control { long dummy; }; -struct jpeg_comp_master { long dummy; }; -struct jpeg_c_main_controller { long dummy; }; -struct jpeg_c_prep_controller { long dummy; }; -struct jpeg_c_coef_controller { long dummy; }; -struct jpeg_marker_writer { long dummy; }; -struct jpeg_color_converter { long dummy; }; -struct jpeg_downsampler { long dummy; }; -struct jpeg_forward_dct { long dummy; }; -struct jpeg_entropy_encoder { long dummy; }; -struct jpeg_decomp_master { long dummy; }; -struct jpeg_d_main_controller { long dummy; }; -struct jpeg_d_coef_controller { long dummy; }; -struct jpeg_d_post_controller { long dummy; }; -struct jpeg_input_controller { long dummy; }; -struct jpeg_marker_reader { long dummy; }; -struct jpeg_entropy_decoder { long dummy; }; -struct jpeg_inverse_dct { long dummy; }; -struct jpeg_upsampler { long dummy; }; -struct jpeg_color_deconverter { long dummy; }; -struct jpeg_color_quantizer { long dummy; }; -#endif /* JPEG_INTERNALS */ -#endif /* INCOMPLETE_TYPES_BROKEN */ - - -/* - * The JPEG library modules define JPEG_INTERNALS before including this file. - * The internal structure declarations are read only when that is true. - * Applications using the library should not include jpegint.h, but may wish - * to include jerror.h. - */ - -#ifdef JPEG_INTERNALS -#include "jpegint.h" /* fetch private declarations */ -#include "jerror.h" /* fetch error codes too */ -#endif - -#endif /* JPEGLIB_H */ |