summaryrefslogtreecommitdiff
path: root/third_party/libopenjpeg20/openjpeg.h
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/libopenjpeg20/openjpeg.h')
-rw-r--r--third_party/libopenjpeg20/openjpeg.h1563
1 files changed, 1563 insertions, 0 deletions
diff --git a/third_party/libopenjpeg20/openjpeg.h b/third_party/libopenjpeg20/openjpeg.h
new file mode 100644
index 0000000000..4a8e75ce5a
--- /dev/null
+++ b/third_party/libopenjpeg20/openjpeg.h
@@ -0,0 +1,1563 @@
+ /*
+ * The copyright in this software is being made available under the 2-clauses
+ * BSD License, included below. This software may be subject to other third
+ * party and contributor rights, including patent rights, and no such rights
+ * are granted under this license.
+ *
+ * Copyright (c) 2002-2014, Universite catholique de Louvain (UCL), Belgium
+ * Copyright (c) 2002-2014, Professor Benoit Macq
+ * Copyright (c) 2001-2003, David Janssens
+ * Copyright (c) 2002-2003, Yannick Verschueren
+ * Copyright (c) 2003-2007, Francois-Olivier Devaux
+ * Copyright (c) 2003-2014, Antonin Descampe
+ * Copyright (c) 2005, Herve Drolon, FreeImage Team
+ * Copyright (c) 2006-2007, Parvatha Elangovan
+ * Copyright (c) 2008, Jerome Fimes, Communications & Systemes <jerome.fimes@c-s.fr>
+ * Copyright (c) 2010-2011, Kaori Hagihara
+ * Copyright (c) 2011-2012, Centre National d'Etudes Spatiales (CNES), France
+ * Copyright (c) 2012, CS Systemes d'Information, France
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS `AS IS'
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef OPENJPEG_H
+#define OPENJPEG_H
+
+
+/*
+==========================================================
+ Compiler directives
+==========================================================
+*/
+
+/*
+The inline keyword is supported by C99 but not by C90.
+Most compilers implement their own version of this keyword ...
+*/
+#ifndef INLINE
+ #if defined(_MSC_VER)
+ #define INLINE __forceinline
+ #elif defined(__GNUC__)
+ #define INLINE __inline__
+ #elif defined(__MWERKS__)
+ #define INLINE inline
+ #else
+ /* add other compilers here ... */
+ #define INLINE
+ #endif /* defined(<Compiler>) */
+#endif /* INLINE */
+
+/* deprecated attribute */
+#ifdef __GNUC__
+ #define OPJ_DEPRECATED(func) func __attribute__ ((deprecated))
+#elif defined(_MSC_VER)
+ #define OPJ_DEPRECATED(func) __declspec(deprecated) func
+#else
+ #pragma message("WARNING: You need to implement DEPRECATED for this compiler")
+ #define OPJ_DEPRECATED(func) func
+#endif
+
+#if defined(OPJ_STATIC) || !defined(_WIN32)
+/* http://gcc.gnu.org/wiki/Visibility */
+# if __GNUC__ >= 4
+# if defined(OPJ_STATIC) /* static library uses "hidden" */
+# define OPJ_API __attribute__ ((visibility ("hidden")))
+# else
+# define OPJ_API __attribute__ ((visibility ("default")))
+# endif
+# define OPJ_LOCAL __attribute__ ((visibility ("hidden")))
+# else
+# define OPJ_API
+# define OPJ_LOCAL
+# endif
+# define OPJ_CALLCONV
+#else
+# define OPJ_CALLCONV __stdcall
+/*
+The following ifdef block is the standard way of creating macros which make exporting
+from a DLL simpler. All files within this DLL are compiled with the OPJ_EXPORTS
+symbol defined on the command line. this symbol should not be defined on any project
+that uses this DLL. This way any other project whose source files include this file see
+OPJ_API functions as being imported from a DLL, wheras this DLL sees symbols
+defined with this macro as being exported.
+*/
+# if defined(OPJ_EXPORTS) || defined(DLL_EXPORT)
+# define OPJ_API __declspec(dllexport)
+# else
+# define OPJ_API __declspec(dllimport)
+# endif /* OPJ_EXPORTS */
+#endif /* !OPJ_STATIC || !_WIN32 */
+
+typedef int OPJ_BOOL;
+#define OPJ_TRUE 1
+#define OPJ_FALSE 0
+
+typedef char OPJ_CHAR;
+typedef float OPJ_FLOAT32;
+typedef double OPJ_FLOAT64;
+typedef unsigned char OPJ_BYTE;
+
+#include "opj_stdint.h"
+
+typedef int8_t OPJ_INT8;
+typedef uint8_t OPJ_UINT8;
+typedef int16_t OPJ_INT16;
+typedef uint16_t OPJ_UINT16;
+typedef int32_t OPJ_INT32;
+typedef uint32_t OPJ_UINT32;
+typedef int64_t OPJ_INT64;
+typedef uint64_t OPJ_UINT64;
+
+typedef int64_t OPJ_OFF_T; /* 64-bit file offset type */
+
+#include <stdio.h>
+typedef size_t OPJ_SIZE_T;
+
+/* Avoid compile-time warning because parameter is not used */
+#define OPJ_ARG_NOT_USED(x) (void)(x)
+
+/*
+==========================================================
+ Useful constant definitions
+==========================================================
+*/
+
+#define OPJ_PATH_LEN 4096 /**< Maximum allowed size for filenames */
+
+#define OPJ_J2K_MAXRLVLS 33 /**< Number of maximum resolution level authorized */
+#define OPJ_J2K_MAXBANDS (3*OPJ_J2K_MAXRLVLS-2) /**< Number of maximum sub-band linked to number of resolution level */
+
+#define OPJ_J2K_DEFAULT_NB_SEGS 10
+#define OPJ_J2K_STREAM_CHUNK_SIZE 0x100000 /** 1 mega by default */
+#define OPJ_J2K_DEFAULT_HEADER_SIZE 1000
+#define OPJ_J2K_MCC_DEFAULT_NB_RECORDS 10
+#define OPJ_J2K_MCT_DEFAULT_NB_RECORDS 10
+
+/* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */
+#define JPWL_MAX_NO_TILESPECS 16 /**< Maximum number of tile parts expected by JPWL: increase at your will */
+#define JPWL_MAX_NO_PACKSPECS 16 /**< Maximum number of packet parts expected by JPWL: increase at your will */
+#define JPWL_MAX_NO_MARKERS 512 /**< Maximum number of JPWL markers: increase at your will */
+#define JPWL_PRIVATEINDEX_NAME "jpwl_index_privatefilename" /**< index file name used when JPWL is on */
+#define JPWL_EXPECTED_COMPONENTS 3 /**< Expect this number of components, so you'll find better the first EPB */
+#define JPWL_MAXIMUM_TILES 8192 /**< Expect this maximum number of tiles, to avoid some crashes */
+#define JPWL_MAXIMUM_HAMMING 2 /**< Expect this maximum number of bit errors in marker id's */
+#define JPWL_MAXIMUM_EPB_ROOM 65450 /**< Expect this maximum number of bytes for composition of EPBs */
+/* <<UniPG */
+
+/**
+ * EXPERIMENTAL FOR THE MOMENT
+ * Supported options about file information used only in j2k_dump
+*/
+#define OPJ_IMG_INFO 1 /**< Basic image information provided to the user */
+#define OPJ_J2K_MH_INFO 2 /**< Codestream information based only on the main header */
+#define OPJ_J2K_TH_INFO 4 /**< Tile information based on the current tile header */
+#define OPJ_J2K_TCH_INFO 8 /**< Tile/Component information of all tiles */
+#define OPJ_J2K_MH_IND 16 /**< Codestream index based only on the main header */
+#define OPJ_J2K_TH_IND 32 /**< Tile index based on the current tile */
+/*FIXME #define OPJ_J2K_CSTR_IND 48*/ /**< */
+#define OPJ_JP2_INFO 128 /**< JP2 file information */
+#define OPJ_JP2_IND 256 /**< JP2 file index */
+
+/**
+ * JPEG 2000 Profiles, see Table A.10 from 15444-1 (updated in various AMD)
+ * These values help chosing the RSIZ value for the J2K codestream.
+ * The RSIZ value triggers various encoding options, as detailed in Table A.10.
+ * If OPJ_PROFILE_PART2 is chosen, it has to be combined with one or more extensions
+ * described hereunder.
+ * Example: rsiz = OPJ_PROFILE_PART2 | OPJ_EXTENSION_MCT;
+ * For broadcast profiles, the OPJ_PROFILE value has to be combined with the targeted
+ * mainlevel (3-0 LSB, value between 0 and 11):
+ * Example: rsiz = OPJ_PROFILE_BC_MULTI | 0x0005; (here mainlevel 5)
+ * For IMF profiles, the OPJ_PROFILE value has to be combined with the targeted mainlevel
+ * (3-0 LSB, value between 0 and 11) and sublevel (7-4 LSB, value between 0 and 9):
+ * Example: rsiz = OPJ_PROFILE_IMF_2K | 0x0040 | 0x0005; (here main 5 and sublevel 4)
+ * */
+#define OPJ_PROFILE_NONE 0x0000 /** no profile, conform to 15444-1 */
+#define OPJ_PROFILE_0 0x0001 /** Profile 0 as described in 15444-1,Table A.45 */
+#define OPJ_PROFILE_1 0x0002 /** Profile 1 as described in 15444-1,Table A.45 */
+#define OPJ_PROFILE_PART2 0x8000 /** At least 1 extension defined in 15444-2 (Part-2) */
+#define OPJ_PROFILE_CINEMA_2K 0x0003 /** 2K cinema profile defined in 15444-1 AMD1 */
+#define OPJ_PROFILE_CINEMA_4K 0x0004 /** 4K cinema profile defined in 15444-1 AMD1 */
+#define OPJ_PROFILE_CINEMA_S2K 0x0005 /** Scalable 2K cinema profile defined in 15444-1 AMD2 */
+#define OPJ_PROFILE_CINEMA_S4K 0x0006 /** Scalable 4K cinema profile defined in 15444-1 AMD2 */
+#define OPJ_PROFILE_CINEMA_LTS 0x0007 /** Long term storage cinema profile defined in 15444-1 AMD2 */
+#define OPJ_PROFILE_BC_SINGLE 0x0100 /** Single Tile Broadcast profile defined in 15444-1 AMD3 */
+#define OPJ_PROFILE_BC_MULTI 0x0200 /** Multi Tile Broadcast profile defined in 15444-1 AMD3 */
+#define OPJ_PROFILE_BC_MULTI_R 0x0300 /** Multi Tile Reversible Broadcast profile defined in 15444-1 AMD3 */
+#define OPJ_PROFILE_IMF_2K 0x0400 /** 2K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_4K 0x0401 /** 4K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_8K 0x0402 /** 8K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_2K_R 0x0403 /** 2K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_4K_R 0x0800 /** 4K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_8K_R 0x0801 /** 8K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */
+
+/**
+ * JPEG 2000 Part-2 extensions
+ * */
+#define OPJ_EXTENSION_NONE 0x0000 /** No Part-2 extension */
+#define OPJ_EXTENSION_MCT 0x0100 /** Custom MCT support */
+
+/**
+ * JPEG 2000 profile macros
+ * */
+#define OPJ_IS_CINEMA(v) (((v) >= OPJ_PROFILE_CINEMA_2K)&&((v) <= OPJ_PROFILE_CINEMA_S4K))
+#define OPJ_IS_STORAGE(v) ((v) == OPJ_PROFILE_CINEMA_LTS)
+#define OPJ_IS_BROADCAST(v) (((v) >= OPJ_PROFILE_BC_SINGLE)&&((v) <= ((OPJ_PROFILE_BC_MULTI_R) | (0x000b))))
+#define OPJ_IS_IMF(v) (((v) >= OPJ_PROFILE_IMF_2K)&&((v) <= ((OPJ_PROFILE_IMF_8K_R) | (0x009b))))
+#define OPJ_IS_PART2(v) ((v) & OPJ_PROFILE_PART2)
+
+/**
+ * JPEG 2000 codestream and component size limits in cinema profiles
+ * */
+#define OPJ_CINEMA_24_CS 1302083 /** Maximum codestream length for 24fps */
+#define OPJ_CINEMA_48_CS 651041 /** Maximum codestream length for 48fps */
+#define OPJ_CINEMA_24_COMP 1041666 /** Maximum size per color component for 2K & 4K @ 24fps */
+#define OPJ_CINEMA_48_COMP 520833 /** Maximum size per color component for 2K @ 48fps */
+
+/*
+==========================================================
+ enum definitions
+==========================================================
+*/
+
+/**
+ * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead
+ * Rsiz Capabilities
+ * */
+typedef enum RSIZ_CAPABILITIES {
+ OPJ_STD_RSIZ = 0, /** Standard JPEG2000 profile*/
+ OPJ_CINEMA2K = 3, /** Profile name for a 2K image*/
+ OPJ_CINEMA4K = 4, /** Profile name for a 4K image*/
+ OPJ_MCT = 0x8100
+} OPJ_RSIZ_CAPABILITIES;
+
+/**
+ * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead
+ * Digital cinema operation mode
+ * */
+typedef enum CINEMA_MODE {
+ OPJ_OFF = 0, /** Not Digital Cinema*/
+ OPJ_CINEMA2K_24 = 1, /** 2K Digital Cinema at 24 fps*/
+ OPJ_CINEMA2K_48 = 2, /** 2K Digital Cinema at 48 fps*/
+ OPJ_CINEMA4K_24 = 3 /** 4K Digital Cinema at 24 fps*/
+}OPJ_CINEMA_MODE;
+
+/**
+ * Progression order
+ * */
+typedef enum PROG_ORDER {
+ OPJ_PROG_UNKNOWN = -1, /**< place-holder */
+ OPJ_LRCP = 0, /**< layer-resolution-component-precinct order */
+ OPJ_RLCP = 1, /**< resolution-layer-component-precinct order */
+ OPJ_RPCL = 2, /**< resolution-precinct-component-layer order */
+ OPJ_PCRL = 3, /**< precinct-component-resolution-layer order */
+ OPJ_CPRL = 4 /**< component-precinct-resolution-layer order */
+} OPJ_PROG_ORDER;
+
+/**
+ * Supported image color spaces
+*/
+typedef enum COLOR_SPACE {
+ OPJ_CLRSPC_UNKNOWN = -1, /**< not supported by the library */
+ OPJ_CLRSPC_UNSPECIFIED = 0, /**< not specified in the codestream */
+ OPJ_CLRSPC_SRGB = 1, /**< sRGB */
+ OPJ_CLRSPC_GRAY = 2, /**< grayscale */
+ OPJ_CLRSPC_SYCC = 3, /**< YUV */
+ OPJ_CLRSPC_EYCC = 4, /**< e-YCC */
+ OPJ_CLRSPC_CMYK = 5 /**< CMYK */
+} OPJ_COLOR_SPACE;
+
+/**
+ * Supported codec
+*/
+typedef enum CODEC_FORMAT {
+ OPJ_CODEC_UNKNOWN = -1, /**< place-holder */
+ OPJ_CODEC_J2K = 0, /**< JPEG-2000 codestream : read/write */
+ OPJ_CODEC_JPT = 1, /**< JPT-stream (JPEG 2000, JPIP) : read only */
+ OPJ_CODEC_JP2 = 2, /**< JP2 file format : read/write */
+ OPJ_CODEC_JPP = 3, /**< JPP-stream (JPEG 2000, JPIP) : to be coded */
+ OPJ_CODEC_JPX = 4 /**< JPX file format (JPEG 2000 Part-2) : to be coded */
+} OPJ_CODEC_FORMAT;
+
+
+/*
+==========================================================
+ event manager typedef definitions
+==========================================================
+*/
+
+/**
+ * Callback function prototype for events
+ * @param msg Event message
+ * @param client_data Client object where will be return the event message
+ * */
+typedef void (*opj_msg_callback) (const char *msg, void *client_data);
+
+/*
+==========================================================
+ codec typedef definitions
+==========================================================
+*/
+
+/**
+ * Progression order changes
+ *
+ */
+typedef struct opj_poc {
+ /** Resolution num start, Component num start, given by POC */
+ OPJ_UINT32 resno0, compno0;
+ /** Layer num end,Resolution num end, Component num end, given by POC */
+ OPJ_UINT32 layno1, resno1, compno1;
+ /** Layer num start,Precinct num start, Precinct num end */
+ OPJ_UINT32 layno0, precno0, precno1;
+ /** Progression order enum*/
+ OPJ_PROG_ORDER prg1,prg;
+ /** Progression order string*/
+ OPJ_CHAR progorder[5];
+ /** Tile number */
+ OPJ_UINT32 tile;
+ /** Start and end values for Tile width and height*/
+ OPJ_INT32 tx0,tx1,ty0,ty1;
+ /** Start value, initialised in pi_initialise_encode*/
+ OPJ_UINT32 layS, resS, compS, prcS;
+ /** End value, initialised in pi_initialise_encode */
+ OPJ_UINT32 layE, resE, compE, prcE;
+ /** Start and end values of Tile width and height, initialised in pi_initialise_encode*/
+ OPJ_UINT32 txS,txE,tyS,tyE,dx,dy;
+ /** Temporary values for Tile parts, initialised in pi_create_encode */
+ OPJ_UINT32 lay_t, res_t, comp_t, prc_t,tx0_t,ty0_t;
+} opj_poc_t;
+
+/**
+ * Compression parameters
+ * */
+typedef struct opj_cparameters {
+ /** size of tile: tile_size_on = false (not in argument) or = true (in argument) */
+ OPJ_BOOL tile_size_on;
+ /** XTOsiz */
+ int cp_tx0;
+ /** YTOsiz */
+ int cp_ty0;
+ /** XTsiz */
+ int cp_tdx;
+ /** YTsiz */
+ int cp_tdy;
+ /** allocation by rate/distortion */
+ int cp_disto_alloc;
+ /** allocation by fixed layer */
+ int cp_fixed_alloc;
+ /** add fixed_quality */
+ int cp_fixed_quality;
+ /** fixed layer */
+ int *cp_matrice;
+ /** comment for coding */
+ char *cp_comment;
+ /** csty : coding style */
+ int csty;
+ /** progression order (default OPJ_LRCP) */
+ OPJ_PROG_ORDER prog_order;
+ /** progression order changes */
+ opj_poc_t POC[32];
+ /** number of progression order changes (POC), default to 0 */
+ OPJ_UINT32 numpocs;
+ /** number of layers */
+ int tcp_numlayers;
+ /** rates of layers - might be subsequently limited by the max_cs_size field */
+ float tcp_rates[100];
+ /** different psnr for successive layers */
+ float tcp_distoratio[100];
+ /** number of resolutions */
+ int numresolution;
+ /** initial code block width, default to 64 */
+ int cblockw_init;
+ /** initial code block height, default to 64 */
+ int cblockh_init;
+ /** mode switch (cblk_style) */
+ int mode;
+ /** 1 : use the irreversible DWT 9-7, 0 : use lossless compression (default) */
+ int irreversible;
+ /** region of interest: affected component in [0..3], -1 means no ROI */
+ int roi_compno;
+ /** region of interest: upshift value */
+ int roi_shift;
+ /* number of precinct size specifications */
+ int res_spec;
+ /** initial precinct width */
+ int prcw_init[OPJ_J2K_MAXRLVLS];
+ /** initial precinct height */
+ int prch_init[OPJ_J2K_MAXRLVLS];
+
+ /**@name command line encoder parameters (not used inside the library) */
+ /*@{*/
+ /** input file name */
+ char infile[OPJ_PATH_LEN];
+ /** output file name */
+ char outfile[OPJ_PATH_LEN];
+ /** DEPRECATED. Index generation is now handeld with the opj_encode_with_info() function. Set to NULL */
+ int index_on;
+ /** DEPRECATED. Index generation is now handeld with the opj_encode_with_info() function. Set to NULL */
+ char index[OPJ_PATH_LEN];
+ /** subimage encoding: origin image offset in x direction */
+ int image_offset_x0;
+ /** subimage encoding: origin image offset in y direction */
+ int image_offset_y0;
+ /** subsampling value for dx */
+ int subsampling_dx;
+ /** subsampling value for dy */
+ int subsampling_dy;
+ /** input file format 0: PGX, 1: PxM, 2: BMP 3:TIF*/
+ int decod_format;
+ /** output file format 0: J2K, 1: JP2, 2: JPT */
+ int cod_format;
+ /*@}*/
+
+/* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */
+ /**@name JPWL encoding parameters */
+ /*@{*/
+ /** enables writing of EPC in MH, thus activating JPWL */
+ OPJ_BOOL jpwl_epc_on;
+ /** error protection method for MH (0,1,16,32,37-128) */
+ int jpwl_hprot_MH;
+ /** tile number of header protection specification (>=0) */
+ int jpwl_hprot_TPH_tileno[JPWL_MAX_NO_TILESPECS];
+ /** error protection methods for TPHs (0,1,16,32,37-128) */
+ int jpwl_hprot_TPH[JPWL_MAX_NO_TILESPECS];
+ /** tile number of packet protection specification (>=0) */
+ int jpwl_pprot_tileno[JPWL_MAX_NO_PACKSPECS];
+ /** packet number of packet protection specification (>=0) */
+ int jpwl_pprot_packno[JPWL_MAX_NO_PACKSPECS];
+ /** error protection methods for packets (0,1,16,32,37-128) */
+ int jpwl_pprot[JPWL_MAX_NO_PACKSPECS];
+ /** enables writing of ESD, (0=no/1/2 bytes) */
+ int jpwl_sens_size;
+ /** sensitivity addressing size (0=auto/2/4 bytes) */
+ int jpwl_sens_addr;
+ /** sensitivity range (0-3) */
+ int jpwl_sens_range;
+ /** sensitivity method for MH (-1=no,0-7) */
+ int jpwl_sens_MH;
+ /** tile number of sensitivity specification (>=0) */
+ int jpwl_sens_TPH_tileno[JPWL_MAX_NO_TILESPECS];
+ /** sensitivity methods for TPHs (-1=no,0-7) */
+ int jpwl_sens_TPH[JPWL_MAX_NO_TILESPECS];
+ /*@}*/
+/* <<UniPG */
+
+ /**
+ * DEPRECATED: use RSIZ, OPJ_PROFILE_* and MAX_COMP_SIZE instead
+ * Digital Cinema compliance 0-not compliant, 1-compliant
+ * */
+ OPJ_CINEMA_MODE cp_cinema;
+ /**
+ * Maximum size (in bytes) for each component.
+ * If == 0, component size limitation is not considered
+ * */
+ int max_comp_size;
+ /**
+ * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead
+ * Profile name
+ * */
+ OPJ_RSIZ_CAPABILITIES cp_rsiz;
+ /** Tile part generation*/
+ char tp_on;
+ /** Flag for Tile part generation*/
+ char tp_flag;
+ /** MCT (multiple component transform) */
+ char tcp_mct;
+ /** Enable JPIP indexing*/
+ OPJ_BOOL jpip_on;
+ /** Naive implementation of MCT restricted to a single reversible array based
+ encoding without offset concerning all the components. */
+ void * mct_data;
+ /**
+ * Maximum size (in bytes) for the whole codestream.
+ * If == 0, codestream size limitation is not considered
+ * If it does not comply with tcp_rates, max_cs_size prevails
+ * and a warning is issued.
+ * */
+ int max_cs_size;
+ /** RSIZ value
+ To be used to combine OPJ_PROFILE_*, OPJ_EXTENSION_* and (sub)levels values. */
+ OPJ_UINT16 rsiz;
+} opj_cparameters_t;
+
+#define OPJ_DPARAMETERS_IGNORE_PCLR_CMAP_CDEF_FLAG 0x0001
+
+/**
+ * Decompression parameters
+ * */
+typedef struct opj_dparameters {
+ /**
+ Set the number of highest resolution levels to be discarded.
+ The image resolution is effectively divided by 2 to the power of the number of discarded levels.
+ The reduce factor is limited by the smallest total number of decomposition levels among tiles.
+ if != 0, then original dimension divided by 2^(reduce);
+ if == 0 or not used, image is decoded to the full resolution
+ */
+ OPJ_UINT32 cp_reduce;
+ /**
+ Set the maximum number of quality layers to decode.
+ If there are less quality layers than the specified number, all the quality layers are decoded.
+ if != 0, then only the first "layer" layers are decoded;
+ if == 0 or not used, all the quality layers are decoded
+ */
+ OPJ_UINT32 cp_layer;
+
+ /**@name command line decoder parameters (not used inside the library) */
+ /*@{*/
+ /** input file name */
+ char infile[OPJ_PATH_LEN];
+ /** output file name */
+ char outfile[OPJ_PATH_LEN];
+ /** input file format 0: J2K, 1: JP2, 2: JPT */
+ int decod_format;
+ /** output file format 0: PGX, 1: PxM, 2: BMP */
+ int cod_format;
+
+ /** Decoding area left boundary */
+ OPJ_UINT32 DA_x0;
+ /** Decoding area right boundary */
+ OPJ_UINT32 DA_x1;
+ /** Decoding area up boundary */
+ OPJ_UINT32 DA_y0;
+ /** Decoding area bottom boundary */
+ OPJ_UINT32 DA_y1;
+ /** Verbose mode */
+ OPJ_BOOL m_verbose;
+
+ /** tile number ot the decoded tile*/
+ OPJ_UINT32 tile_index;
+ /** Nb of tile to decode */
+ OPJ_UINT32 nb_tile_to_decode;
+
+ /*@}*/
+
+/* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */
+ /**@name JPWL decoding parameters */
+ /*@{*/
+ /** activates the JPWL correction capabilities */
+ OPJ_BOOL jpwl_correct;
+ /** expected number of components */
+ int jpwl_exp_comps;
+ /** maximum number of tiles */
+ int jpwl_max_tiles;
+ /*@}*/
+/* <<UniPG */
+
+ unsigned int flags;
+
+} opj_dparameters_t;
+
+
+/**
+ * JPEG2000 codec V2.
+ * */
+typedef void * opj_codec_t;
+
+/*
+==========================================================
+ I/O stream typedef definitions
+==========================================================
+*/
+
+/**
+ * Stream open flags.
+ * */
+/** The stream was opened for reading. */
+#define OPJ_STREAM_READ OPJ_TRUE
+/** The stream was opened for writing. */
+#define OPJ_STREAM_WRITE OPJ_FALSE
+
+/*
+ * Callback function prototype for read function
+ */
+typedef OPJ_SIZE_T (* opj_stream_read_fn) (void * p_buffer, OPJ_SIZE_T p_nb_bytes, void * p_user_data) ;
+
+/*
+ * Callback function prototype for write function
+ */
+typedef OPJ_SIZE_T (* opj_stream_write_fn) (void * p_buffer, OPJ_SIZE_T p_nb_bytes, void * p_user_data) ;
+
+/*
+ * Callback function prototype for skip function
+ */
+typedef OPJ_OFF_T (* opj_stream_skip_fn) (OPJ_OFF_T p_nb_bytes, void * p_user_data) ;
+
+/*
+ * Callback function prototype for seek function
+ */
+typedef OPJ_BOOL (* opj_stream_seek_fn) (OPJ_OFF_T p_nb_bytes, void * p_user_data) ;
+
+/*
+ * Callback function prototype for free user data function
+ */
+typedef void (* opj_stream_free_user_data_fn) (void * p_user_data) ;
+
+/*
+ * JPEG2000 Stream.
+ */
+typedef void * opj_stream_t;
+
+/*
+==========================================================
+ image typedef definitions
+==========================================================
+*/
+
+/**
+ * Defines a single image component
+ * */
+typedef struct opj_image_comp {
+ /** XRsiz: horizontal separation of a sample of ith component with respect to the reference grid */
+ OPJ_UINT32 dx;
+ /** YRsiz: vertical separation of a sample of ith component with respect to the reference grid */
+ OPJ_UINT32 dy;
+ /** data width */
+ OPJ_UINT32 w;
+ /** data height */
+ OPJ_UINT32 h;
+ /** x component offset compared to the whole image */
+ OPJ_UINT32 x0;
+ /** y component offset compared to the whole image */
+ OPJ_UINT32 y0;
+ /** precision */
+ OPJ_UINT32 prec;
+ /** image depth in bits */
+ OPJ_UINT32 bpp;
+ /** signed (1) / unsigned (0) */
+ OPJ_UINT32 sgnd;
+ /** number of decoded resolution */
+ OPJ_UINT32 resno_decoded;
+ /** number of division by 2 of the out image compared to the original size of image */
+ OPJ_UINT32 factor;
+ /** image component data */
+ OPJ_INT32 *data;
+ /** alpha channel */
+ OPJ_UINT16 alpha;
+} opj_image_comp_t;
+
+/**
+ * Defines image data and characteristics
+ * */
+typedef struct opj_image {
+ /** XOsiz: horizontal offset from the origin of the reference grid to the left side of the image area */
+ OPJ_UINT32 x0;
+ /** YOsiz: vertical offset from the origin of the reference grid to the top side of the image area */
+ OPJ_UINT32 y0;
+ /** Xsiz: width of the reference grid */
+ OPJ_UINT32 x1;
+ /** Ysiz: height of the reference grid */
+ OPJ_UINT32 y1;
+ /** number of components in the image */
+ OPJ_UINT32 numcomps;
+ /** color space: sRGB, Greyscale or YUV */
+ OPJ_COLOR_SPACE color_space;
+ /** image components */
+ opj_image_comp_t *comps;
+ /** 'restricted' ICC profile */
+ OPJ_BYTE *icc_profile_buf;
+ /** size of ICC profile */
+ OPJ_UINT32 icc_profile_len;
+} opj_image_t;
+
+
+/**
+ * Component parameters structure used by the opj_image_create function
+ * */
+typedef struct opj_image_comptparm {
+ /** XRsiz: horizontal separation of a sample of ith component with respect to the reference grid */
+ OPJ_UINT32 dx;
+ /** YRsiz: vertical separation of a sample of ith component with respect to the reference grid */
+ OPJ_UINT32 dy;
+ /** data width */
+ OPJ_UINT32 w;
+ /** data height */
+ OPJ_UINT32 h;
+ /** x component offset compared to the whole image */
+ OPJ_UINT32 x0;
+ /** y component offset compared to the whole image */
+ OPJ_UINT32 y0;
+ /** precision */
+ OPJ_UINT32 prec;
+ /** image depth in bits */
+ OPJ_UINT32 bpp;
+ /** signed (1) / unsigned (0) */
+ OPJ_UINT32 sgnd;
+} opj_image_cmptparm_t;
+
+
+/*
+==========================================================
+ Information on the JPEG 2000 codestream
+==========================================================
+*/
+/* QUITE EXPERIMENTAL FOR THE MOMENT */
+
+/**
+ * Index structure : Information concerning a packet inside tile
+ * */
+typedef struct opj_packet_info {
+ /** packet start position (including SOP marker if it exists) */
+ OPJ_OFF_T start_pos;
+ /** end of packet header position (including EPH marker if it exists)*/
+ OPJ_OFF_T end_ph_pos;
+ /** packet end position */
+ OPJ_OFF_T end_pos;
+ /** packet distorsion */
+ double disto;
+} opj_packet_info_t;
+
+
+/* UniPG>> */
+/**
+ * Marker structure
+ * */
+typedef struct opj_marker_info {
+ /** marker type */
+ unsigned short int type;
+ /** position in codestream */
+ OPJ_OFF_T pos;
+ /** length, marker val included */
+ int len;
+} opj_marker_info_t;
+/* <<UniPG */
+
+/**
+ * Index structure : Information concerning tile-parts
+*/
+typedef struct opj_tp_info {
+ /** start position of tile part */
+ int tp_start_pos;
+ /** end position of tile part header */
+ int tp_end_header;
+ /** end position of tile part */
+ int tp_end_pos;
+ /** start packet of tile part */
+ int tp_start_pack;
+ /** number of packets of tile part */
+ int tp_numpacks;
+} opj_tp_info_t;
+
+/**
+ * Index structure : information regarding tiles
+*/
+typedef struct opj_tile_info {
+ /** value of thresh for each layer by tile cfr. Marcela */
+ double *thresh;
+ /** number of tile */
+ int tileno;
+ /** start position */
+ int start_pos;
+ /** end position of the header */
+ int end_header;
+ /** end position */
+ int end_pos;
+ /** precinct number for each resolution level (width) */
+ int pw[33];
+ /** precinct number for each resolution level (height) */
+ int ph[33];
+ /** precinct size (in power of 2), in X for each resolution level */
+ int pdx[33];
+ /** precinct size (in power of 2), in Y for each resolution level */
+ int pdy[33];
+ /** information concerning packets inside tile */
+ opj_packet_info_t *packet;
+ /** add fixed_quality */
+ int numpix;
+ /** add fixed_quality */
+ double distotile;
+ /** number of markers */
+ int marknum;
+ /** list of markers */
+ opj_marker_info_t *marker;
+ /** actual size of markers array */
+ int maxmarknum;
+ /** number of tile parts */
+ int num_tps;
+ /** information concerning tile parts */
+ opj_tp_info_t *tp;
+} opj_tile_info_t;
+
+/**
+ * Index structure of the codestream
+*/
+typedef struct opj_codestream_info {
+ /** maximum distortion reduction on the whole image (add for Marcela) */
+ double D_max;
+ /** packet number */
+ int packno;
+ /** writing the packet in the index with t2_encode_packets */
+ int index_write;
+ /** image width */
+ int image_w;
+ /** image height */
+ int image_h;
+ /** progression order */
+ OPJ_PROG_ORDER prog;
+ /** tile size in x */
+ int tile_x;
+ /** tile size in y */
+ int tile_y;
+ /** */
+ int tile_Ox;
+ /** */
+ int tile_Oy;
+ /** number of tiles in X */
+ int tw;
+ /** number of tiles in Y */
+ int th;
+ /** component numbers */
+ int numcomps;
+ /** number of layer */
+ int numlayers;
+ /** number of decomposition for each component */
+ int *numdecompos;
+/* UniPG>> */
+ /** number of markers */
+ int marknum;
+ /** list of markers */
+ opj_marker_info_t *marker;
+ /** actual size of markers array */
+ int maxmarknum;
+/* <<UniPG */
+ /** main header position */
+ int main_head_start;
+ /** main header position */
+ int main_head_end;
+ /** codestream's size */
+ int codestream_size;
+ /** information regarding tiles inside image */
+ opj_tile_info_t *tile;
+} opj_codestream_info_t;
+
+/* <----------------------------------------------------------- */
+/* new output managment of the codestream information and index */
+
+/**
+ * Tile-component coding parameters information
+ */
+typedef struct opj_tccp_info
+{
+ /** component index */
+ OPJ_UINT32 compno;
+ /** coding style */
+ OPJ_UINT32 csty;
+ /** number of resolutions */
+ OPJ_UINT32 numresolutions;
+ /** code-blocks width */
+ OPJ_UINT32 cblkw;
+ /** code-blocks height */
+ OPJ_UINT32 cblkh;
+ /** code-block coding style */
+ OPJ_UINT32 cblksty;
+ /** discrete wavelet transform identifier */
+ OPJ_UINT32 qmfbid;
+ /** quantisation style */
+ OPJ_UINT32 qntsty;
+ /** stepsizes used for quantization */
+ OPJ_UINT32 stepsizes_mant[OPJ_J2K_MAXBANDS];
+ /** stepsizes used for quantization */
+ OPJ_UINT32 stepsizes_expn[OPJ_J2K_MAXBANDS];
+ /** number of guard bits */
+ OPJ_UINT32 numgbits;
+ /** Region Of Interest shift */
+ OPJ_INT32 roishift;
+ /** precinct width */
+ OPJ_UINT32 prcw[OPJ_J2K_MAXRLVLS];
+ /** precinct height */
+ OPJ_UINT32 prch[OPJ_J2K_MAXRLVLS];
+}
+opj_tccp_info_t;
+
+/**
+ * Tile coding parameters information
+ */
+typedef struct opj_tile_v2_info {
+
+ /** number (index) of tile */
+ int tileno;
+ /** coding style */
+ OPJ_UINT32 csty;
+ /** progression order */
+ OPJ_PROG_ORDER prg;
+ /** number of layers */
+ OPJ_UINT32 numlayers;
+ /** multi-component transform identifier */
+ OPJ_UINT32 mct;
+
+ /** information concerning tile component parameters*/
+ opj_tccp_info_t *tccp_info;
+
+} opj_tile_info_v2_t;
+
+/**
+ * Information structure about the codestream (FIXME should be expand and enhance)
+ */
+typedef struct opj_codestream_info_v2 {
+ /* Tile info */
+ /** tile origin in x = XTOsiz */
+ OPJ_UINT32 tx0;
+ /** tile origin in y = YTOsiz */
+ OPJ_UINT32 ty0;
+ /** tile size in x = XTsiz */
+ OPJ_UINT32 tdx;
+ /** tile size in y = YTsiz */
+ OPJ_UINT32 tdy;
+ /** number of tiles in X */
+ OPJ_UINT32 tw;
+ /** number of tiles in Y */
+ OPJ_UINT32 th;
+
+ /** number of components*/
+ OPJ_UINT32 nbcomps;
+
+ /** Default information regarding tiles inside image */
+ opj_tile_info_v2_t m_default_tile_info;
+
+ /** information regarding tiles inside image */
+ opj_tile_info_v2_t *tile_info; /* FIXME not used for the moment */
+
+} opj_codestream_info_v2_t;
+
+
+/**
+ * Index structure about a tile part
+ */
+typedef struct opj_tp_index {
+ /** start position */
+ OPJ_OFF_T start_pos;
+ /** end position of the header */
+ OPJ_OFF_T end_header;
+ /** end position */
+ OPJ_OFF_T end_pos;
+
+} opj_tp_index_t;
+
+/**
+ * Index structure about a tile
+ */
+typedef struct opj_tile_index {
+ /** tile index */
+ OPJ_UINT32 tileno;
+
+ /** number of tile parts */
+ OPJ_UINT32 nb_tps;
+ /** current nb of tile part (allocated)*/
+ OPJ_UINT32 current_nb_tps;
+ /** current tile-part index */
+ OPJ_UINT32 current_tpsno;
+ /** information concerning tile parts */
+ opj_tp_index_t *tp_index;
+
+ /* UniPG>> */ /* NOT USED FOR THE MOMENT IN THE V2 VERSION */
+ /** number of markers */
+ OPJ_UINT32 marknum;
+ /** list of markers */
+ opj_marker_info_t *marker;
+ /** actual size of markers array */
+ OPJ_UINT32 maxmarknum;
+ /* <<UniPG */
+
+ /** packet number */
+ OPJ_UINT32 nb_packet;
+ /** information concerning packets inside tile */
+ opj_packet_info_t *packet_index;
+
+} opj_tile_index_t;
+
+/**
+ * Index structure of the codestream (FIXME should be expand and enhance)
+ */
+typedef struct opj_codestream_index {
+ /** main header start position (SOC position) */
+ OPJ_OFF_T main_head_start;
+ /** main header end position (first SOT position) */
+ OPJ_OFF_T main_head_end;
+
+ /** codestream's size */
+ OPJ_UINT64 codestream_size;
+
+/* UniPG>> */ /* NOT USED FOR THE MOMENT IN THE V2 VERSION */
+ /** number of markers */
+ OPJ_UINT32 marknum;
+ /** list of markers */
+ opj_marker_info_t *marker;
+ /** actual size of markers array */
+ OPJ_UINT32 maxmarknum;
+/* <<UniPG */
+
+ /** */
+ OPJ_UINT32 nb_of_tiles;
+ /** */
+ opj_tile_index_t *tile_index; /* FIXME not used for the moment */
+
+}opj_codestream_index_t;
+/* -----------------------------------------------------------> */
+
+/*
+==========================================================
+ Metadata from the JP2file
+==========================================================
+*/
+
+/**
+ * Info structure of the JP2 file
+ * EXPERIMENTAL FOR THE MOMENT
+ */
+typedef struct opj_jp2_metadata {
+ /** */
+ OPJ_INT32 not_used;
+
+} opj_jp2_metadata_t;
+
+/**
+ * Index structure of the JP2 file
+ * EXPERIMENTAL FOR THE MOMENT
+ */
+typedef struct opj_jp2_index {
+ /** */
+ OPJ_INT32 not_used;
+
+} opj_jp2_index_t;
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+==========================================================
+ openjpeg version
+==========================================================
+*/
+
+/* Get the version of the openjpeg library*/
+OPJ_API const char * OPJ_CALLCONV opj_version(void);
+
+/*
+==========================================================
+ image functions definitions
+==========================================================
+*/
+
+/**
+ * Create an image
+ *
+ * @param numcmpts number of components
+ * @param cmptparms components parameters
+ * @param clrspc image color space
+ * @return returns a new image structure if successful, returns NULL otherwise
+ * */
+OPJ_API opj_image_t* OPJ_CALLCONV opj_image_create(OPJ_UINT32 numcmpts, opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc);
+
+/**
+ * Deallocate any resources associated with an image
+ *
+ * @param image image to be destroyed
+ */
+OPJ_API void OPJ_CALLCONV opj_image_destroy(opj_image_t *image);
+
+/**
+ * Creates an image without allocating memory for the image (used in the new version of the library).
+ *
+ * @param numcmpts the number of components
+ * @param cmptparms the components parameters
+ * @param clrspc the image color space
+ *
+ * @return a new image structure if successful, NULL otherwise.
+*/
+OPJ_API opj_image_t* OPJ_CALLCONV opj_image_tile_create(OPJ_UINT32 numcmpts, opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc);
+
+/*
+==========================================================
+ stream functions definitions
+==========================================================
+*/
+
+/**
+ * Creates an abstract stream. This function does nothing except allocating memory and initializing the abstract stream.
+ *
+ * @param p_is_input if set to true then the stream will be an input stream, an output stream else.
+ *
+ * @return a stream object.
+*/
+OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_default_create(OPJ_BOOL p_is_input);
+
+/**
+ * Creates an abstract stream. This function does nothing except allocating memory and initializing the abstract stream.
+ *
+ * @param p_buffer_size FIXME DOC
+ * @param p_is_input if set to true then the stream will be an input stream, an output stream else.
+ *
+ * @return a stream object.
+*/
+OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create(OPJ_SIZE_T p_buffer_size, OPJ_BOOL p_is_input);
+
+/**
+ * Destroys a stream created by opj_create_stream. This function does NOT close the abstract stream. If needed the user must
+ * close its own implementation of the stream.
+ *
+ * @param p_stream the stream to destroy.
+ */
+OPJ_API void OPJ_CALLCONV opj_stream_destroy(opj_stream_t* p_stream);
+
+/**
+ * Sets the given function to be used as a read function.
+ * @param p_stream the stream to modify
+ * @param p_function the function to use a read function.
+*/
+OPJ_API void OPJ_CALLCONV opj_stream_set_read_function(opj_stream_t* p_stream, opj_stream_read_fn p_function);
+
+/**
+ * Sets the given function to be used as a write function.
+ * @param p_stream the stream to modify
+ * @param p_function the function to use a write function.
+*/
+OPJ_API void OPJ_CALLCONV opj_stream_set_write_function(opj_stream_t* p_stream, opj_stream_write_fn p_function);
+
+/**
+ * Sets the given function to be used as a skip function.
+ * @param p_stream the stream to modify
+ * @param p_function the function to use a skip function.
+*/
+OPJ_API void OPJ_CALLCONV opj_stream_set_skip_function(opj_stream_t* p_stream, opj_stream_skip_fn p_function);
+
+/**
+ * Sets the given function to be used as a seek function, the stream is then seekable.
+ * @param p_stream the stream to modify
+ * @param p_function the function to use a skip function.
+*/
+OPJ_API void OPJ_CALLCONV opj_stream_set_seek_function(opj_stream_t* p_stream, opj_stream_seek_fn p_function);
+
+/**
+ * Sets the given data to be used as a user data for the stream.
+ * @param p_stream the stream to modify
+ * @param p_data the data to set.
+ * @param p_function the function to free p_data when opj_stream_destroy() is called.
+*/
+OPJ_API void OPJ_CALLCONV opj_stream_set_user_data (opj_stream_t* p_stream, void * p_data, opj_stream_free_user_data_fn p_function);
+
+/**
+ * Sets the length of the user data for the stream.
+ *
+ * @param p_stream the stream to modify
+ * @param data_length length of the user_data.
+*/
+OPJ_API void OPJ_CALLCONV opj_stream_set_user_data_length(opj_stream_t* p_stream, OPJ_UINT64 data_length);
+
+/**
+ * Create a stream from a file identified with its filename with default parameters (helper function)
+ * @param fname the filename of the file to stream
+ * @param p_is_read_stream whether the stream is a read stream (true) or not (false)
+*/
+OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_default_file_stream (const char *fname, OPJ_BOOL p_is_read_stream);
+
+/** Create a stream from a file identified with its filename with a specific buffer size
+ * @param fname the filename of the file to stream
+ * @param p_buffer_size size of the chunk used to stream
+ * @param p_is_read_stream whether the stream is a read stream (true) or not (false)
+*/
+OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_file_stream (const char *fname,
+ OPJ_SIZE_T p_buffer_size,
+ OPJ_BOOL p_is_read_stream);
+
+/*
+==========================================================
+ event manager functions definitions
+==========================================================
+*/
+/**
+ * Set the info handler use by openjpeg.
+ * @param p_codec the codec previously initialise
+ * @param p_callback the callback function which will be used
+ * @param p_user_data client object where will be returned the message
+*/
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_info_handler(opj_codec_t * p_codec,
+ opj_msg_callback p_callback,
+ void * p_user_data);
+/**
+ * Set the warning handler use by openjpeg.
+ * @param p_codec the codec previously initialise
+ * @param p_callback the callback function which will be used
+ * @param p_user_data client object where will be returned the message
+*/
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_warning_handler(opj_codec_t * p_codec,
+ opj_msg_callback p_callback,
+ void * p_user_data);
+/**
+ * Set the error handler use by openjpeg.
+ * @param p_codec the codec previously initialise
+ * @param p_callback the callback function which will be used
+ * @param p_user_data client object where will be returned the message
+*/
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_error_handler(opj_codec_t * p_codec,
+ opj_msg_callback p_callback,
+ void * p_user_data);
+
+/*
+==========================================================
+ codec functions definitions
+==========================================================
+*/
+
+/**
+ * Creates a J2K/JP2 decompression structure
+ * @param format Decoder to select
+ *
+ * @return Returns a handle to a decompressor if successful, returns NULL otherwise
+ * */
+OPJ_API opj_codec_t* OPJ_CALLCONV opj_create_decompress(OPJ_CODEC_FORMAT format);
+
+/**
+ * Destroy a decompressor handle
+ *
+ * @param p_codec decompressor handle to destroy
+ */
+OPJ_API void OPJ_CALLCONV opj_destroy_codec(opj_codec_t * p_codec);
+
+/**
+ * Read after the codestream if necessary
+ * @param p_codec the JPEG2000 codec to read.
+ * @param p_stream the JPEG2000 stream.
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_end_decompress ( opj_codec_t *p_codec,
+ opj_stream_t *p_stream);
+
+
+/**
+ * Set decoding parameters to default values
+ * @param parameters Decompression parameters
+ */
+OPJ_API void OPJ_CALLCONV opj_set_default_decoder_parameters(opj_dparameters_t *parameters);
+
+/**
+ * Setup the decoder with decompression parameters provided by the user and with the message handler
+ * provided by the user.
+ *
+ * @param p_codec decompressor handler
+ * @param parameters decompression parameters
+ *
+ * @return true if the decoder is correctly set
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_setup_decoder(opj_codec_t *p_codec,
+ opj_dparameters_t *parameters );
+
+/**
+ * Decodes an image header.
+ *
+ * @param p_stream the jpeg2000 stream.
+ * @param p_codec the jpeg2000 codec to read.
+ * @param p_image the image structure initialized with the characteristics of encoded image.
+ *
+ * @return true if the main header of the codestream and the JP2 header is correctly read.
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_read_header ( opj_stream_t *p_stream,
+ opj_codec_t *p_codec,
+ opj_image_t **p_image);
+
+/**
+ * Sets the given area to be decoded. This function should be called right after opj_read_header and before any tile header reading.
+ *
+ * @param p_codec the jpeg2000 codec.
+ * @param p_image the decoded image previously setted by opj_read_header
+ * @param p_start_x the left position of the rectangle to decode (in image coordinates).
+ * @param p_end_x the right position of the rectangle to decode (in image coordinates).
+ * @param p_start_y the up position of the rectangle to decode (in image coordinates).
+ * @param p_end_y the bottom position of the rectangle to decode (in image coordinates).
+ *
+ * @return true if the area could be set.
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decode_area( opj_codec_t *p_codec,
+ opj_image_t* p_image,
+ OPJ_INT32 p_start_x, OPJ_INT32 p_start_y,
+ OPJ_INT32 p_end_x, OPJ_INT32 p_end_y );
+
+/**
+ * Decode an image from a JPEG-2000 codestream
+ *
+ * @param p_decompressor decompressor handle
+ * @param p_stream Input buffer stream
+ * @param p_image the decoded image
+ * @return true if success, otherwise false
+ * */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_decode( opj_codec_t *p_decompressor,
+ opj_stream_t *p_stream,
+ opj_image_t *p_image);
+
+/**
+ * Get the decoded tile from the codec
+ *
+ * @param p_codec the jpeg2000 codec.
+ * @param p_stream input streamm
+ * @param p_image output image
+ * @param tile_index index of the tile which will be decode
+ *
+ * @return true if success, otherwise false
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_get_decoded_tile( opj_codec_t *p_codec,
+ opj_stream_t *p_stream,
+ opj_image_t *p_image,
+ OPJ_UINT32 tile_index);
+
+/**
+ * Set the resolution factor of the decoded image
+ * @param p_codec the jpeg2000 codec.
+ * @param res_factor resolution factor to set
+ *
+ * @return true if success, otherwise false
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decoded_resolution_factor(opj_codec_t *p_codec, OPJ_UINT32 res_factor);
+
+/**
+ * Writes a tile with the given data.
+ *
+ * @param p_codec the jpeg2000 codec.
+ * @param p_tile_index the index of the tile to write. At the moment, the tiles must be written from 0 to n-1 in sequence.
+ * @param p_data pointer to the data to write. Data is arranged in sequence, data_comp0, then data_comp1, then ... NO INTERLEAVING should be set.
+ * @param p_data_size this value os used to make sure the data being written is correct. The size must be equal to the sum for each component of
+ * tile_width * tile_height * component_size. component_size can be 1,2 or 4 bytes, depending on the precision of the given component.
+ * @param p_stream the stream to write data to.
+ *
+ * @return true if the data could be written.
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_write_tile ( opj_codec_t *p_codec,
+ OPJ_UINT32 p_tile_index,
+ OPJ_BYTE * p_data,
+ OPJ_UINT32 p_data_size,
+ opj_stream_t *p_stream );
+
+/**
+ * Reads a tile header. This function is compulsory and allows one to know the size of the tile thta will be decoded.
+ * The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile.
+ *
+ * @param p_codec the jpeg2000 codec.
+ * @param p_tile_index pointer to a value that will hold the index of the tile being decoded, in case of success.
+ * @param p_data_size pointer to a value that will hold the maximum size of the decoded data, in case of success. In case
+ * of truncated codestreams, the actual number of bytes decoded may be lower. The computation of the size is the same
+ * as depicted in opj_write_tile.
+ * @param p_tile_x0 pointer to a value that will hold the x0 pos of the tile (in the image).
+ * @param p_tile_y0 pointer to a value that will hold the y0 pos of the tile (in the image).
+ * @param p_tile_x1 pointer to a value that will hold the x1 pos of the tile (in the image).
+ * @param p_tile_y1 pointer to a value that will hold the y1 pos of the tile (in the image).
+ * @param p_nb_comps pointer to a value that will hold the number of components in the tile.
+ * @param p_should_go_on pointer to a boolean that will hold the fact that the decoding should go on. In case the
+ * codestream is over at the time of the call, the value will be set to false. The user should then stop
+ * the decoding.
+ * @param p_stream the stream to decode.
+ * @return true if the tile header could be decoded. In case the decoding should end, the returned value is still true.
+ * returning false may be the result of a shortage of memory or an internal error.
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_read_tile_header( opj_codec_t *p_codec,
+ opj_stream_t * p_stream,
+ OPJ_UINT32 * p_tile_index,
+ OPJ_UINT32 * p_data_size,
+ OPJ_INT32 * p_tile_x0, OPJ_INT32 * p_tile_y0,
+ OPJ_INT32 * p_tile_x1, OPJ_INT32 * p_tile_y1,
+ OPJ_UINT32 * p_nb_comps,
+ OPJ_BOOL * p_should_go_on );
+
+/**
+ * Reads a tile data. This function is compulsory and allows one to decode tile data. opj_read_tile_header should be called before.
+ * The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile.
+ *
+ * @param p_codec the jpeg2000 codec.
+ * @param p_tile_index the index of the tile being decoded, this should be the value set by opj_read_tile_header.
+ * @param p_data pointer to a memory block that will hold the decoded data.
+ * @param p_data_size size of p_data. p_data_size should be bigger or equal to the value set by opj_read_tile_header.
+ * @param p_stream the stream to decode.
+ *
+ * @return true if the data could be decoded.
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_decode_tile_data( opj_codec_t *p_codec,
+ OPJ_UINT32 p_tile_index,
+ OPJ_BYTE * p_data,
+ OPJ_UINT32 p_data_size,
+ opj_stream_t *p_stream );
+
+/* COMPRESSION FUNCTIONS*/
+
+/**
+ * Creates a J2K/JP2 compression structure
+ * @param format Coder to select
+ * @return Returns a handle to a compressor if successful, returns NULL otherwise
+ */
+OPJ_API opj_codec_t* OPJ_CALLCONV opj_create_compress(OPJ_CODEC_FORMAT format);
+
+/**
+Set encoding parameters to default values, that means :
+<ul>
+<li>Lossless
+<li>1 tile
+<li>Size of precinct : 2^15 x 2^15 (means 1 precinct)
+<li>Size of code-block : 64 x 64
+<li>Number of resolutions: 6
+<li>No SOP marker in the codestream
+<li>No EPH marker in the codestream
+<li>No sub-sampling in x or y direction
+<li>No mode switch activated
+<li>Progression order: LRCP
+<li>No index file
+<li>No ROI upshifted
+<li>No offset of the origin of the image
+<li>No offset of the origin of the tiles
+<li>Reversible DWT 5-3
+</ul>
+@param parameters Compression parameters
+*/
+OPJ_API void OPJ_CALLCONV opj_set_default_encoder_parameters(opj_cparameters_t *parameters);
+
+/**
+ * Setup the encoder parameters using the current image and using user parameters.
+ * @param p_codec Compressor handle
+ * @param parameters Compression parameters
+ * @param image Input filled image
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_setup_encoder(opj_codec_t *p_codec,
+ opj_cparameters_t *parameters,
+ opj_image_t *image);
+
+/**
+ * Start to compress the current image.
+ * @param p_codec Compressor handle
+ * @param image Input filled image
+ * @param p_stream Input stgream
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_start_compress ( opj_codec_t *p_codec,
+ opj_image_t * p_image,
+ opj_stream_t *p_stream);
+
+/**
+ * End to compress the current image.
+ * @param p_codec Compressor handle
+ * @param p_stream Input stgream
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_end_compress (opj_codec_t *p_codec,
+ opj_stream_t *p_stream);
+
+/**
+ * Encode an image into a JPEG-2000 codestream
+ * @param p_codec compressor handle
+ * @param p_stream Output buffer stream
+ *
+ * @return Returns true if successful, returns false otherwise
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_encode(opj_codec_t *p_codec,
+ opj_stream_t *p_stream);
+/*
+==========================================================
+ codec output functions definitions
+==========================================================
+*/
+/* EXPERIMENTAL FUNCTIONS FOR NOW, USED ONLY IN J2K_DUMP*/
+
+/**
+Destroy Codestream information after compression or decompression
+@param cstr_info Codestream information structure
+*/
+OPJ_API void OPJ_CALLCONV opj_destroy_cstr_info(opj_codestream_info_v2_t **cstr_info);
+
+
+/**
+ * Dump the codec information into the output stream
+ *
+ * @param p_codec the jpeg2000 codec.
+ * @param info_flag type of information dump.
+ * @param output_stream output stream where dump the informations get from the codec.
+ *
+ */
+OPJ_API void OPJ_CALLCONV opj_dump_codec( opj_codec_t *p_codec,
+ OPJ_INT32 info_flag,
+ FILE* output_stream);
+
+/**
+ * Get the codestream information from the codec
+ *
+ * @param p_codec the jpeg2000 codec.
+ *
+ * @return a pointer to a codestream information structure.
+ *
+ */
+OPJ_API opj_codestream_info_v2_t* OPJ_CALLCONV opj_get_cstr_info(opj_codec_t *p_codec);
+
+/**
+ * Get the codestream index from the codec
+ *
+ * @param p_codec the jpeg2000 codec.
+ *
+ * @return a pointer to a codestream index structure.
+ *
+ */
+OPJ_API opj_codestream_index_t * OPJ_CALLCONV opj_get_cstr_index(opj_codec_t *p_codec);
+
+OPJ_API void OPJ_CALLCONV opj_destroy_cstr_index(opj_codestream_index_t **p_cstr_index);
+
+
+/**
+ * Get the JP2 file information from the codec FIXME
+ *
+ * @param p_codec the jpeg2000 codec.
+ *
+ * @return a pointer to a JP2 metadata structure.
+ *
+ */
+OPJ_API opj_jp2_metadata_t* OPJ_CALLCONV opj_get_jp2_metadata(opj_codec_t *p_codec);
+
+/**
+ * Get the JP2 file index from the codec FIXME
+ *
+ * @param p_codec the jpeg2000 codec.
+ *
+ * @return a pointer to a JP2 index structure.
+ *
+ */
+OPJ_API opj_jp2_index_t* OPJ_CALLCONV opj_get_jp2_index(opj_codec_t *p_codec);
+
+
+/*
+==========================================================
+ MCT functions
+==========================================================
+*/
+
+/**
+ * Sets the MCT matrix to use.
+ *
+ * @param parameters the parameters to change.
+ * @param pEncodingMatrix the encoding matrix.
+ * @param p_dc_shift the dc shift coefficients to use.
+ * @param pNbComp the number of components of the image.
+ *
+ * @return true if the parameters could be set.
+ */
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_MCT( opj_cparameters_t *parameters,
+ OPJ_FLOAT32 * pEncodingMatrix,
+ OPJ_INT32 * p_dc_shift,
+ OPJ_UINT32 pNbComp);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPENJPEG_H */