diff options
Diffstat (limited to 'third_party/tiff_v403/tif_fax3.h')
-rw-r--r-- | third_party/tiff_v403/tif_fax3.h | 538 |
1 files changed, 0 insertions, 538 deletions
diff --git a/third_party/tiff_v403/tif_fax3.h b/third_party/tiff_v403/tif_fax3.h deleted file mode 100644 index b0f46c9a43..0000000000 --- a/third_party/tiff_v403/tif_fax3.h +++ /dev/null @@ -1,538 +0,0 @@ -/* $Id: tif_fax3.h,v 1.9 2011-03-10 20:23:07 fwarmerdam Exp $ */ - -/* - * Copyright (c) 1990-1997 Sam Leffler - * Copyright (c) 1991-1997 Silicon Graphics, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and - * its documentation for any purpose is hereby granted without fee, provided - * that (i) the above copyright notices and this permission notice appear in - * all copies of the software and related documentation, and (ii) the names of - * Sam Leffler and Silicon Graphics may not be used in any advertising or - * publicity relating to the software without the specific, prior written - * permission of Sam Leffler and Silicon Graphics. - * - * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, - * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY - * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. - * - * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR - * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, - * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, - * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF - * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE - * OF THIS SOFTWARE. - */ - -#ifndef _FAX3_ -#define _FAX3_ -/* - * TIFF Library. - * - * CCITT Group 3 (T.4) and Group 4 (T.6) Decompression Support. - * - * Decoder support is derived, with permission, from the code - * in Frank Cringle's viewfax program; - * Copyright (C) 1990, 1995 Frank D. Cringle. - */ -#include "tiff.h" - -/* - * To override the default routine used to image decoded - * spans one can use the pseduo tag TIFFTAG_FAXFILLFUNC. - * The routine must have the type signature given below; - * for example: - * - * fillruns(unsigned char* buf, uint32* runs, uint32* erun, uint32 lastx) - * - * where buf is place to set the bits, runs is the array of b&w run - * lengths (white then black), erun is the last run in the array, and - * lastx is the width of the row in pixels. Fill routines can assume - * the run array has room for at least lastx runs and can overwrite - * data in the run array as needed (e.g. to append zero runs to bring - * the count up to a nice multiple). - */ -typedef void (*TIFFFaxFillFunc)(unsigned char*, uint32*, uint32*, uint32); - -/* - * The default run filler; made external for other decoders. - */ -#if defined(__cplusplus) -extern "C" { -#endif -extern void _TIFFFax3fillruns(unsigned char*, uint32*, uint32*, uint32); -#if defined(__cplusplus) -} -#endif - - -/* finite state machine codes */ -#define S_Null 0 -#define S_Pass 1 -#define S_Horiz 2 -#define S_V0 3 -#define S_VR 4 -#define S_VL 5 -#define S_Ext 6 -#define S_TermW 7 -#define S_TermB 8 -#define S_MakeUpW 9 -#define S_MakeUpB 10 -#define S_MakeUp 11 -#define S_EOL 12 - -typedef struct { /* state table entry */ - unsigned char State; /* see above */ - unsigned char Width; /* width of code in bits */ - uint32 Param; /* unsigned 32-bit run length in bits */ -} TIFFFaxTabEnt; - -extern const TIFFFaxTabEnt TIFFFaxMainTable[]; -extern const TIFFFaxTabEnt TIFFFaxWhiteTable[]; -extern const TIFFFaxTabEnt TIFFFaxBlackTable[]; - -/* - * The following macros define the majority of the G3/G4 decoder - * algorithm using the state tables defined elsewhere. To build - * a decoder you need some setup code and some glue code. Note - * that you may also need/want to change the way the NeedBits* - * macros get input data if, for example, you know the data to be - * decoded is properly aligned and oriented (doing so before running - * the decoder can be a big performance win). - * - * Consult the decoder in the TIFF library for an idea of what you - * need to define and setup to make use of these definitions. - * - * NB: to enable a debugging version of these macros define FAX3_DEBUG - * before including this file. Trace output goes to stdout. - */ - -#ifndef EndOfData -#define EndOfData() (cp >= ep) -#endif -/* - * Need <=8 or <=16 bits of input data. Unlike viewfax we - * cannot use/assume a word-aligned, properly bit swizzled - * input data set because data may come from an arbitrarily - * aligned, read-only source such as a memory-mapped file. - * Note also that the viewfax decoder does not check for - * running off the end of the input data buffer. This is - * possible for G3-encoded data because it prescans the input - * data to count EOL markers, but can cause problems for G4 - * data. In any event, we don't prescan and must watch for - * running out of data since we can't permit the library to - * scan past the end of the input data buffer. - * - * Finally, note that we must handle remaindered data at the end - * of a strip specially. The coder asks for a fixed number of - * bits when scanning for the next code. This may be more bits - * than are actually present in the data stream. If we appear - * to run out of data but still have some number of valid bits - * remaining then we makeup the requested amount with zeros and - * return successfully. If the returned data is incorrect then - * we should be called again and get a premature EOF error; - * otherwise we should get the right answer. - */ -#ifndef NeedBits8 -#define NeedBits8(n,eoflab) do { \ - if (BitsAvail < (n)) { \ - if (EndOfData()) { \ - if (BitsAvail == 0) /* no valid bits */ \ - goto eoflab; \ - BitsAvail = (n); /* pad with zeros */ \ - } else { \ - BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail; \ - BitsAvail += 8; \ - } \ - } \ -} while (0) -#endif -#ifndef NeedBits16 -#define NeedBits16(n,eoflab) do { \ - if (BitsAvail < (n)) { \ - if (EndOfData()) { \ - if (BitsAvail == 0) /* no valid bits */ \ - goto eoflab; \ - BitsAvail = (n); /* pad with zeros */ \ - } else { \ - BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail; \ - if ((BitsAvail += 8) < (n)) { \ - if (EndOfData()) { \ - /* NB: we know BitsAvail is non-zero here */ \ - BitsAvail = (n); /* pad with zeros */ \ - } else { \ - BitAcc |= ((uint32) bitmap[*cp++])<<BitsAvail; \ - BitsAvail += 8; \ - } \ - } \ - } \ - } \ -} while (0) -#endif -#define GetBits(n) (BitAcc & ((1<<(n))-1)) -#define ClrBits(n) do { \ - BitsAvail -= (n); \ - BitAcc >>= (n); \ -} while (0) - -#ifdef FAX3_DEBUG -static const char* StateNames[] = { - "Null ", - "Pass ", - "Horiz ", - "V0 ", - "VR ", - "VL ", - "Ext ", - "TermW ", - "TermB ", - "MakeUpW", - "MakeUpB", - "MakeUp ", - "EOL ", -}; -#define DEBUG_SHOW putchar(BitAcc & (1 << t) ? '1' : '0') -#define LOOKUP8(wid,tab,eoflab) do { \ - int t; \ - NeedBits8(wid,eoflab); \ - TabEnt = tab + GetBits(wid); \ - printf("%08lX/%d: %s%5d\t", (long) BitAcc, BitsAvail, \ - StateNames[TabEnt->State], TabEnt->Param); \ - for (t = 0; t < TabEnt->Width; t++) \ - DEBUG_SHOW; \ - putchar('\n'); \ - fflush(stdout); \ - ClrBits(TabEnt->Width); \ -} while (0) -#define LOOKUP16(wid,tab,eoflab) do { \ - int t; \ - NeedBits16(wid,eoflab); \ - TabEnt = tab + GetBits(wid); \ - printf("%08lX/%d: %s%5d\t", (long) BitAcc, BitsAvail, \ - StateNames[TabEnt->State], TabEnt->Param); \ - for (t = 0; t < TabEnt->Width; t++) \ - DEBUG_SHOW; \ - putchar('\n'); \ - fflush(stdout); \ - ClrBits(TabEnt->Width); \ -} while (0) - -#define SETVALUE(x) do { \ - *pa++ = RunLength + (x); \ - printf("SETVALUE: %d\t%d\n", RunLength + (x), a0); \ - a0 += x; \ - RunLength = 0; \ -} while (0) -#else -#define LOOKUP8(wid,tab,eoflab) do { \ - NeedBits8(wid,eoflab); \ - TabEnt = tab + GetBits(wid); \ - ClrBits(TabEnt->Width); \ -} while (0) -#define LOOKUP16(wid,tab,eoflab) do { \ - NeedBits16(wid,eoflab); \ - TabEnt = tab + GetBits(wid); \ - ClrBits(TabEnt->Width); \ -} while (0) - -/* - * Append a run to the run length array for the - * current row and reset decoding state. - */ -#define SETVALUE(x) do { \ - *pa++ = RunLength + (x); \ - a0 += (x); \ - RunLength = 0; \ -} while (0) -#endif - -/* - * Synchronize input decoding at the start of each - * row by scanning for an EOL (if appropriate) and - * skipping any trash data that might be present - * after a decoding error. Note that the decoding - * done elsewhere that recognizes an EOL only consumes - * 11 consecutive zero bits. This means that if EOLcnt - * is non-zero then we still need to scan for the final flag - * bit that is part of the EOL code. - */ -#define SYNC_EOL(eoflab) do { \ - if (EOLcnt == 0) { \ - for (;;) { \ - NeedBits16(11,eoflab); \ - if (GetBits(11) == 0) \ - break; \ - ClrBits(1); \ - } \ - } \ - for (;;) { \ - NeedBits8(8,eoflab); \ - if (GetBits(8)) \ - break; \ - ClrBits(8); \ - } \ - while (GetBits(1) == 0) \ - ClrBits(1); \ - ClrBits(1); /* EOL bit */ \ - EOLcnt = 0; /* reset EOL counter/flag */ \ -} while (0) - -/* - * Cleanup the array of runs after decoding a row. - * We adjust final runs to insure the user buffer is not - * overwritten and/or undecoded area is white filled. - */ -#define CLEANUP_RUNS() do { \ - if (RunLength) \ - SETVALUE(0); \ - if (a0 != lastx) { \ - badlength(a0, lastx); \ - while (a0 > lastx && pa > thisrun) \ - a0 -= *--pa; \ - if (a0 < lastx) { \ - if (a0 < 0) \ - a0 = 0; \ - if ((pa-thisrun)&1) \ - SETVALUE(0); \ - SETVALUE(lastx - a0); \ - } else if (a0 > lastx) { \ - SETVALUE(lastx); \ - SETVALUE(0); \ - } \ - } \ -} while (0) - -/* - * Decode a line of 1D-encoded data. - * - * The line expanders are written as macros so that they can be reused - * but still have direct access to the local variables of the "calling" - * function. - * - * Note that unlike the original version we have to explicitly test for - * a0 >= lastx after each black/white run is decoded. This is because - * the original code depended on the input data being zero-padded to - * insure the decoder recognized an EOL before running out of data. - */ -#define EXPAND1D(eoflab) do { \ - for (;;) { \ - for (;;) { \ - LOOKUP16(12, TIFFFaxWhiteTable, eof1d); \ - switch (TabEnt->State) { \ - case S_EOL: \ - EOLcnt = 1; \ - goto done1d; \ - case S_TermW: \ - SETVALUE(TabEnt->Param); \ - goto doneWhite1d; \ - case S_MakeUpW: \ - case S_MakeUp: \ - a0 += TabEnt->Param; \ - RunLength += TabEnt->Param; \ - break; \ - default: \ - unexpected("WhiteTable", a0); \ - goto done1d; \ - } \ - } \ - doneWhite1d: \ - if (a0 >= lastx) \ - goto done1d; \ - for (;;) { \ - LOOKUP16(13, TIFFFaxBlackTable, eof1d); \ - switch (TabEnt->State) { \ - case S_EOL: \ - EOLcnt = 1; \ - goto done1d; \ - case S_TermB: \ - SETVALUE(TabEnt->Param); \ - goto doneBlack1d; \ - case S_MakeUpB: \ - case S_MakeUp: \ - a0 += TabEnt->Param; \ - RunLength += TabEnt->Param; \ - break; \ - default: \ - unexpected("BlackTable", a0); \ - goto done1d; \ - } \ - } \ - doneBlack1d: \ - if (a0 >= lastx) \ - goto done1d; \ - if( *(pa-1) == 0 && *(pa-2) == 0 ) \ - pa -= 2; \ - } \ -eof1d: \ - prematureEOF(a0); \ - CLEANUP_RUNS(); \ - goto eoflab; \ -done1d: \ - CLEANUP_RUNS(); \ -} while (0) - -/* - * Update the value of b1 using the array - * of runs for the reference line. - */ -#define CHECK_b1 do { \ - if (pa != thisrun) while (b1 <= a0 && b1 < lastx) { \ - b1 += pb[0] + pb[1]; \ - pb += 2; \ - } \ -} while (0) - -/* - * Expand a row of 2D-encoded data. - */ -#define EXPAND2D(eoflab) do { \ - while (a0 < lastx) { \ - LOOKUP8(7, TIFFFaxMainTable, eof2d); \ - switch (TabEnt->State) { \ - case S_Pass: \ - CHECK_b1; \ - b1 += *pb++; \ - RunLength += b1 - a0; \ - a0 = b1; \ - b1 += *pb++; \ - break; \ - case S_Horiz: \ - if ((pa-thisrun)&1) { \ - for (;;) { /* black first */ \ - LOOKUP16(13, TIFFFaxBlackTable, eof2d); \ - switch (TabEnt->State) { \ - case S_TermB: \ - SETVALUE(TabEnt->Param); \ - goto doneWhite2da; \ - case S_MakeUpB: \ - case S_MakeUp: \ - a0 += TabEnt->Param; \ - RunLength += TabEnt->Param; \ - break; \ - default: \ - goto badBlack2d; \ - } \ - } \ - doneWhite2da:; \ - for (;;) { /* then white */ \ - LOOKUP16(12, TIFFFaxWhiteTable, eof2d); \ - switch (TabEnt->State) { \ - case S_TermW: \ - SETVALUE(TabEnt->Param); \ - goto doneBlack2da; \ - case S_MakeUpW: \ - case S_MakeUp: \ - a0 += TabEnt->Param; \ - RunLength += TabEnt->Param; \ - break; \ - default: \ - goto badWhite2d; \ - } \ - } \ - doneBlack2da:; \ - } else { \ - for (;;) { /* white first */ \ - LOOKUP16(12, TIFFFaxWhiteTable, eof2d); \ - switch (TabEnt->State) { \ - case S_TermW: \ - SETVALUE(TabEnt->Param); \ - goto doneWhite2db; \ - case S_MakeUpW: \ - case S_MakeUp: \ - a0 += TabEnt->Param; \ - RunLength += TabEnt->Param; \ - break; \ - default: \ - goto badWhite2d; \ - } \ - } \ - doneWhite2db:; \ - for (;;) { /* then black */ \ - LOOKUP16(13, TIFFFaxBlackTable, eof2d); \ - switch (TabEnt->State) { \ - case S_TermB: \ - SETVALUE(TabEnt->Param); \ - goto doneBlack2db; \ - case S_MakeUpB: \ - case S_MakeUp: \ - a0 += TabEnt->Param; \ - RunLength += TabEnt->Param; \ - break; \ - default: \ - goto badBlack2d; \ - } \ - } \ - doneBlack2db:; \ - } \ - CHECK_b1; \ - break; \ - case S_V0: \ - CHECK_b1; \ - SETVALUE(b1 - a0); \ - b1 += *pb++; \ - break; \ - case S_VR: \ - CHECK_b1; \ - SETVALUE(b1 - a0 + TabEnt->Param); \ - b1 += *pb++; \ - break; \ - case S_VL: \ - CHECK_b1; \ - if (b1 <= (int) (a0 + TabEnt->Param)) { \ - if (b1 < (int) (a0 + TabEnt->Param) || pa != thisrun) { \ - unexpected("VL", a0); \ - goto eol2d; \ - } \ - } \ - SETVALUE(b1 - a0 - TabEnt->Param); \ - b1 -= *--pb; \ - break; \ - case S_Ext: \ - *pa++ = lastx - a0; \ - extension(a0); \ - goto eol2d; \ - case S_EOL: \ - *pa++ = lastx - a0; \ - NeedBits8(4,eof2d); \ - if (GetBits(4)) \ - unexpected("EOL", a0); \ - ClrBits(4); \ - EOLcnt = 1; \ - goto eol2d; \ - default: \ - badMain2d: \ - unexpected("MainTable", a0); \ - goto eol2d; \ - badBlack2d: \ - unexpected("BlackTable", a0); \ - goto eol2d; \ - badWhite2d: \ - unexpected("WhiteTable", a0); \ - goto eol2d; \ - eof2d: \ - prematureEOF(a0); \ - CLEANUP_RUNS(); \ - goto eoflab; \ - } \ - } \ - if (RunLength) { \ - if (RunLength + a0 < lastx) { \ - /* expect a final V0 */ \ - NeedBits8(1,eof2d); \ - if (!GetBits(1)) \ - goto badMain2d; \ - ClrBits(1); \ - } \ - SETVALUE(0); \ - } \ -eol2d: \ - CLEANUP_RUNS(); \ -} while (0) -#endif /* _FAX3_ */ -/* - * Local Variables: - * mode: c - * c-basic-offset: 8 - * fill-column: 78 - * End: - */ |