diff options
Diffstat (limited to 'third_party/tiff_v403/tif_open.c')
| -rw-r--r-- | third_party/tiff_v403/tif_open.c | 726 |
1 files changed, 0 insertions, 726 deletions
diff --git a/third_party/tiff_v403/tif_open.c b/third_party/tiff_v403/tif_open.c deleted file mode 100644 index f1c3e0a4a6..0000000000 --- a/third_party/tiff_v403/tif_open.c +++ /dev/null @@ -1,726 +0,0 @@ -/* $Id: tif_open.c,v 1.46 2010-12-06 16:54:54 faxguy Exp $ */ - -/* - * Copyright (c) 1988-1997 Sam Leffler - * Copyright (c) 1991-1997 Silicon Graphics, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and - * its documentation for any purpose is hereby granted without fee, provided - * that (i) the above copyright notices and this permission notice appear in - * all copies of the software and related documentation, and (ii) the names of - * Sam Leffler and Silicon Graphics may not be used in any advertising or - * publicity relating to the software without the specific, prior written - * permission of Sam Leffler and Silicon Graphics. - * - * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, - * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY - * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. - * - * IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR - * ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, - * OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, - * WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF - * LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE - * OF THIS SOFTWARE. - */ - -/* - * TIFF Library. - */ -#include "tiffiop.h" - -/* - * Dummy functions to fill the omitted client procedures. - */ -static int -_tiffDummyMapProc(thandle_t fd, void** pbase, toff_t* psize) -{ - (void) fd; (void) pbase; (void) psize; - return (0); -} - -static void -_tiffDummyUnmapProc(thandle_t fd, void* base, toff_t size) -{ - (void) fd; (void) base; (void) size; -} - -int -_TIFFgetMode(const char* mode, const char* module) -{ - int m = -1; - - switch (mode[0]) { - case 'r': - m = O_RDONLY; - if (mode[1] == '+') - m = O_RDWR; - break; - case 'w': - case 'a': - m = O_RDWR|O_CREAT; - if (mode[0] == 'w') - m |= O_TRUNC; - break; - default: - TIFFErrorExt(0, module, "\"%s\": Bad mode", mode); - break; - } - return (m); -} - -TIFF* -TIFFClientOpen( - const char* name, const char* mode, - thandle_t clientdata, - TIFFReadWriteProc readproc, - TIFFReadWriteProc writeproc, - TIFFSeekProc seekproc, - TIFFCloseProc closeproc, - TIFFSizeProc sizeproc, - TIFFMapFileProc mapproc, - TIFFUnmapFileProc unmapproc -) -{ - static const char module[] = "TIFFClientOpen"; - TIFF *tif; - int m; - const char* cp; - - /* The following are configuration checks. They should be redundant, but should not - * compile to any actual code in an optimised release build anyway. If any of them - * fail, (makefile-based or other) configuration is not correct */ - assert(sizeof(uint8)==1); - assert(sizeof(int8)==1); - assert(sizeof(uint16)==2); - assert(sizeof(int16)==2); - assert(sizeof(uint32)==4); - assert(sizeof(int32)==4); - assert(sizeof(uint64)==8); - assert(sizeof(int64)==8); - assert(sizeof(tmsize_t)==sizeof(void*)); - { - union{ - uint8 a8[2]; - uint16 a16; - } n; - n.a8[0]=1; - n.a8[1]=0; - #ifdef WORDS_BIGENDIAN - assert(n.a16==256); - #else - assert(n.a16==1); - #endif - } - - m = _TIFFgetMode(mode, module); - if (m == -1) - goto bad2; - tif = (TIFF *)_TIFFmalloc((tmsize_t)(sizeof (TIFF) + strlen(name) + 1)); - if (tif == NULL) { - TIFFErrorExt(clientdata, module, "%s: Out of memory (TIFF structure)", name); - goto bad2; - } - _TIFFmemset(tif, 0, sizeof (*tif)); - tif->tif_name = (char *)tif + sizeof (TIFF); - strcpy(tif->tif_name, name); - tif->tif_mode = m &~ (O_CREAT|O_TRUNC); - tif->tif_curdir = (uint16) -1; /* non-existent directory */ - tif->tif_curoff = 0; - tif->tif_curstrip = (uint32) -1; /* invalid strip */ - tif->tif_row = (uint32) -1; /* read/write pre-increment */ - tif->tif_clientdata = clientdata; - if (!readproc || !writeproc || !seekproc || !closeproc || !sizeproc) { - TIFFErrorExt(clientdata, module, - "One of the client procedures is NULL pointer."); - goto bad2; - } - tif->tif_readproc = readproc; - tif->tif_writeproc = writeproc; - tif->tif_seekproc = seekproc; - tif->tif_closeproc = closeproc; - tif->tif_sizeproc = sizeproc; - if (mapproc) - tif->tif_mapproc = mapproc; - else - tif->tif_mapproc = _tiffDummyMapProc; - if (unmapproc) - tif->tif_unmapproc = unmapproc; - else - tif->tif_unmapproc = _tiffDummyUnmapProc; - _TIFFSetDefaultCompressionState(tif); /* setup default state */ - /* - * Default is to return data MSB2LSB and enable the - * use of memory-mapped files and strip chopping when - * a file is opened read-only. - */ - tif->tif_flags = FILLORDER_MSB2LSB; - if (m == O_RDONLY ) - tif->tif_flags |= TIFF_MAPPED; - - #ifdef STRIPCHOP_DEFAULT - if (m == O_RDONLY || m == O_RDWR) - tif->tif_flags |= STRIPCHOP_DEFAULT; - #endif - - /* - * Process library-specific flags in the open mode string. - * The following flags may be used to control intrinsic library - * behaviour that may or may not be desirable (usually for - * compatibility with some application that claims to support - * TIFF but only supports some braindead idea of what the - * vendor thinks TIFF is): - * - * 'l' use little-endian byte order for creating a file - * 'b' use big-endian byte order for creating a file - * 'L' read/write information using LSB2MSB bit order - * 'B' read/write information using MSB2LSB bit order - * 'H' read/write information using host bit order - * 'M' enable use of memory-mapped files when supported - * 'm' disable use of memory-mapped files - * 'C' enable strip chopping support when reading - * 'c' disable strip chopping support - * 'h' read TIFF header only, do not load the first IFD - * '4' ClassicTIFF for creating a file (default) - * '8' BigTIFF for creating a file - * - * The use of the 'l' and 'b' flags is strongly discouraged. - * These flags are provided solely because numerous vendors, - * typically on the PC, do not correctly support TIFF; they - * only support the Intel little-endian byte order. This - * support is not configured by default because it supports - * the violation of the TIFF spec that says that readers *MUST* - * support both byte orders. It is strongly recommended that - * you not use this feature except to deal with busted apps - * that write invalid TIFF. And even in those cases you should - * bang on the vendors to fix their software. - * - * The 'L', 'B', and 'H' flags are intended for applications - * that can optimize operations on data by using a particular - * bit order. By default the library returns data in MSB2LSB - * bit order for compatibiltiy with older versions of this - * library. Returning data in the bit order of the native cpu - * makes the most sense but also requires applications to check - * the value of the FillOrder tag; something they probably do - * not do right now. - * - * The 'M' and 'm' flags are provided because some virtual memory - * systems exhibit poor behaviour when large images are mapped. - * These options permit clients to control the use of memory-mapped - * files on a per-file basis. - * - * The 'C' and 'c' flags are provided because the library support - * for chopping up large strips into multiple smaller strips is not - * application-transparent and as such can cause problems. The 'c' - * option permits applications that only want to look at the tags, - * for example, to get the unadulterated TIFF tag information. - */ - for (cp = mode; *cp; cp++) - switch (*cp) { - case 'b': - #ifndef WORDS_BIGENDIAN - if (m&O_CREAT) - tif->tif_flags |= TIFF_SWAB; - #endif - break; - case 'l': - #ifdef WORDS_BIGENDIAN - if ((m&O_CREAT)) - tif->tif_flags |= TIFF_SWAB; - #endif - break; - case 'B': - tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) | - FILLORDER_MSB2LSB; - break; - case 'L': - tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) | - FILLORDER_LSB2MSB; - break; - case 'H': - tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) | - HOST_FILLORDER; - break; - case 'M': - if (m == O_RDONLY) - tif->tif_flags |= TIFF_MAPPED; - break; - case 'm': - if (m == O_RDONLY) - tif->tif_flags &= ~TIFF_MAPPED; - break; - case 'C': - if (m == O_RDONLY) - tif->tif_flags |= TIFF_STRIPCHOP; - break; - case 'c': - if (m == O_RDONLY) - tif->tif_flags &= ~TIFF_STRIPCHOP; - break; - case 'h': - tif->tif_flags |= TIFF_HEADERONLY; - break; - case '8': - if (m&O_CREAT) - tif->tif_flags |= TIFF_BIGTIFF; - break; - } - /* - * Read in TIFF header. - */ - if ((m & O_TRUNC) || - !ReadOK(tif, &tif->tif_header, sizeof (TIFFHeaderClassic))) { - if (tif->tif_mode == O_RDONLY) { - TIFFErrorExt(tif->tif_clientdata, name, - "Cannot read TIFF header"); - goto bad; - } - /* - * Setup header and write. - */ - #ifdef WORDS_BIGENDIAN - tif->tif_header.common.tiff_magic = tif->tif_flags & TIFF_SWAB - ? TIFF_LITTLEENDIAN : TIFF_BIGENDIAN; - #else - tif->tif_header.common.tiff_magic = tif->tif_flags & TIFF_SWAB - ? TIFF_BIGENDIAN : TIFF_LITTLEENDIAN; - #endif - if (!(tif->tif_flags&TIFF_BIGTIFF)) - { - tif->tif_header.common.tiff_version = TIFF_VERSION_CLASSIC; - tif->tif_header.classic.tiff_diroff = 0; - if (tif->tif_flags & TIFF_SWAB) - TIFFSwabShort(&tif->tif_header.common.tiff_version); - tif->tif_header_size = sizeof(TIFFHeaderClassic); - } - else - { - tif->tif_header.common.tiff_version = TIFF_VERSION_BIG; - tif->tif_header.big.tiff_offsetsize = 8; - tif->tif_header.big.tiff_unused = 0; - tif->tif_header.big.tiff_diroff = 0; - if (tif->tif_flags & TIFF_SWAB) - { - TIFFSwabShort(&tif->tif_header.common.tiff_version); - TIFFSwabShort(&tif->tif_header.big.tiff_offsetsize); - } - tif->tif_header_size = sizeof (TIFFHeaderBig); - } - /* - * The doc for "fopen" for some STD_C_LIBs says that if you - * open a file for modify ("+"), then you must fseek (or - * fflush?) between any freads and fwrites. This is not - * necessary on most systems, but has been shown to be needed - * on Solaris. - */ - TIFFSeekFile( tif, 0, SEEK_SET ); - if (!WriteOK(tif, &tif->tif_header, (tmsize_t)(tif->tif_header_size))) { - TIFFErrorExt(tif->tif_clientdata, name, - "Error writing TIFF header"); - goto bad; - } - /* - * Setup the byte order handling. - */ - if (tif->tif_header.common.tiff_magic == TIFF_BIGENDIAN) { - #ifndef WORDS_BIGENDIAN - tif->tif_flags |= TIFF_SWAB; - #endif - } else { - #ifdef WORDS_BIGENDIAN - tif->tif_flags |= TIFF_SWAB; - #endif - } - /* - * Setup default directory. - */ - if (!TIFFDefaultDirectory(tif)) - goto bad; - tif->tif_diroff = 0; - tif->tif_dirlist = NULL; - tif->tif_dirlistsize = 0; - tif->tif_dirnumber = 0; - return (tif); - } - /* - * Setup the byte order handling. - */ - if (tif->tif_header.common.tiff_magic != TIFF_BIGENDIAN && - tif->tif_header.common.tiff_magic != TIFF_LITTLEENDIAN - #if MDI_SUPPORT - && - #if HOST_BIGENDIAN - tif->tif_header.common.tiff_magic != MDI_BIGENDIAN - #else - tif->tif_header.common.tiff_magic != MDI_LITTLEENDIAN - #endif - ) { - TIFFErrorExt(tif->tif_clientdata, name, - "Not a TIFF or MDI file, bad magic number %d (0x%x)", - #else - ) { - TIFFErrorExt(tif->tif_clientdata, name, - "Not a TIFF file, bad magic number %d (0x%x)", - #endif - tif->tif_header.common.tiff_magic, - tif->tif_header.common.tiff_magic); - goto bad; - } - if (tif->tif_header.common.tiff_magic == TIFF_BIGENDIAN) { - #ifndef WORDS_BIGENDIAN - tif->tif_flags |= TIFF_SWAB; - #endif - } else { - #ifdef WORDS_BIGENDIAN - tif->tif_flags |= TIFF_SWAB; - #endif - } - if (tif->tif_flags & TIFF_SWAB) - TIFFSwabShort(&tif->tif_header.common.tiff_version); - if ((tif->tif_header.common.tiff_version != TIFF_VERSION_CLASSIC)&& - (tif->tif_header.common.tiff_version != TIFF_VERSION_BIG)) { - TIFFErrorExt(tif->tif_clientdata, name, - "Not a TIFF file, bad version number %d (0x%x)", - tif->tif_header.common.tiff_version, - tif->tif_header.common.tiff_version); - goto bad; - } - if (tif->tif_header.common.tiff_version == TIFF_VERSION_CLASSIC) - { - if (tif->tif_flags & TIFF_SWAB) - TIFFSwabLong(&tif->tif_header.classic.tiff_diroff); - tif->tif_header_size = sizeof(TIFFHeaderClassic); - } - else - { - if (!ReadOK(tif, ((uint8*)(&tif->tif_header) + sizeof(TIFFHeaderClassic)), (sizeof(TIFFHeaderBig)-sizeof(TIFFHeaderClassic)))) - { - TIFFErrorExt(tif->tif_clientdata, name, - "Cannot read TIFF header"); - goto bad; - } - if (tif->tif_flags & TIFF_SWAB) - { - TIFFSwabShort(&tif->tif_header.big.tiff_offsetsize); - TIFFSwabLong8(&tif->tif_header.big.tiff_diroff); - } - if (tif->tif_header.big.tiff_offsetsize != 8) - { - TIFFErrorExt(tif->tif_clientdata, name, - "Not a TIFF file, bad BigTIFF offsetsize %d (0x%x)", - tif->tif_header.big.tiff_offsetsize, - tif->tif_header.big.tiff_offsetsize); - goto bad; - } - if (tif->tif_header.big.tiff_unused != 0) - { - TIFFErrorExt(tif->tif_clientdata, name, - "Not a TIFF file, bad BigTIFF unused %d (0x%x)", - tif->tif_header.big.tiff_unused, - tif->tif_header.big.tiff_unused); - goto bad; - } - tif->tif_header_size = sizeof(TIFFHeaderBig); - tif->tif_flags |= TIFF_BIGTIFF; - } - tif->tif_flags |= TIFF_MYBUFFER; - tif->tif_rawcp = tif->tif_rawdata = 0; - tif->tif_rawdatasize = 0; - tif->tif_rawdataoff = 0; - tif->tif_rawdataloaded = 0; - - switch (mode[0]) { - case 'r': - if (!(tif->tif_flags&TIFF_BIGTIFF)) - tif->tif_nextdiroff = tif->tif_header.classic.tiff_diroff; - else - tif->tif_nextdiroff = tif->tif_header.big.tiff_diroff; - /* - * Try to use a memory-mapped file if the client - * has not explicitly suppressed usage with the - * 'm' flag in the open mode (see above). - */ - if (tif->tif_flags & TIFF_MAPPED) - { - toff_t n; - if (TIFFMapFileContents(tif,(void**)(&tif->tif_base),&n)) - { - tif->tif_size=(tmsize_t)n; - assert((toff_t)tif->tif_size==n); - } - else - tif->tif_flags &= ~TIFF_MAPPED; - } - /* - * Sometimes we do not want to read the first directory (for example, - * it may be broken) and want to proceed to other directories. I this - * case we use the TIFF_HEADERONLY flag to open file and return - * immediately after reading TIFF header. - */ - if (tif->tif_flags & TIFF_HEADERONLY) - return (tif); - - /* - * Setup initial directory. - */ - if (TIFFReadDirectory(tif)) { - tif->tif_rawcc = (tmsize_t)-1; - tif->tif_flags |= TIFF_BUFFERSETUP; - return (tif); - } - break; - case 'a': - /* - * New directories are automatically append - * to the end of the directory chain when they - * are written out (see TIFFWriteDirectory). - */ - if (!TIFFDefaultDirectory(tif)) - goto bad; - return (tif); - } -bad: - tif->tif_mode = O_RDONLY; /* XXX avoid flush */ - TIFFCleanup(tif); -bad2: - return ((TIFF*)0); -} - -/* - * Query functions to access private data. - */ - -/* - * Return open file's name. - */ -const char * -TIFFFileName(TIFF* tif) -{ - return (tif->tif_name); -} - -/* - * Set the file name. - */ -const char * -TIFFSetFileName(TIFF* tif, const char *name) -{ - const char* old_name = tif->tif_name; - tif->tif_name = (char *)name; - return (old_name); -} - -/* - * Return open file's I/O descriptor. - */ -int -TIFFFileno(TIFF* tif) -{ - return (tif->tif_fd); -} - -/* - * Set open file's I/O descriptor, and return previous value. - */ -int -TIFFSetFileno(TIFF* tif, int fd) -{ - int old_fd = tif->tif_fd; - tif->tif_fd = fd; - return old_fd; -} - -/* - * Return open file's clientdata. - */ -thandle_t -TIFFClientdata(TIFF* tif) -{ - return (tif->tif_clientdata); -} - -/* - * Set open file's clientdata, and return previous value. - */ -thandle_t -TIFFSetClientdata(TIFF* tif, thandle_t newvalue) -{ - thandle_t m = tif->tif_clientdata; - tif->tif_clientdata = newvalue; - return m; -} - -/* - * Return read/write mode. - */ -int -TIFFGetMode(TIFF* tif) -{ - return (tif->tif_mode); -} - -/* - * Return read/write mode. - */ -int -TIFFSetMode(TIFF* tif, int mode) -{ - int old_mode = tif->tif_mode; - tif->tif_mode = mode; - return (old_mode); -} - -/* - * Return nonzero if file is organized in - * tiles; zero if organized as strips. - */ -int -TIFFIsTiled(TIFF* tif) -{ - return (isTiled(tif)); -} - -/* - * Return current row being read/written. - */ -uint32 -TIFFCurrentRow(TIFF* tif) -{ - return (tif->tif_row); -} - -/* - * Return index of the current directory. - */ -uint16 -TIFFCurrentDirectory(TIFF* tif) -{ - return (tif->tif_curdir); -} - -/* - * Return current strip. - */ -uint32 -TIFFCurrentStrip(TIFF* tif) -{ - return (tif->tif_curstrip); -} - -/* - * Return current tile. - */ -uint32 -TIFFCurrentTile(TIFF* tif) -{ - return (tif->tif_curtile); -} - -/* - * Return nonzero if the file has byte-swapped data. - */ -int -TIFFIsByteSwapped(TIFF* tif) -{ - return ((tif->tif_flags & TIFF_SWAB) != 0); -} - -/* - * Return nonzero if the data is returned up-sampled. - */ -int -TIFFIsUpSampled(TIFF* tif) -{ - return (isUpSampled(tif)); -} - -/* - * Return nonzero if the data is returned in MSB-to-LSB bit order. - */ -int -TIFFIsMSB2LSB(TIFF* tif) -{ - return (isFillOrder(tif, FILLORDER_MSB2LSB)); -} - -/* - * Return nonzero if given file was written in big-endian order. - */ -int -TIFFIsBigEndian(TIFF* tif) -{ - return (tif->tif_header.common.tiff_magic == TIFF_BIGENDIAN); -} - -/* - * Return pointer to file read method. - */ -TIFFReadWriteProc -TIFFGetReadProc(TIFF* tif) -{ - return (tif->tif_readproc); -} - -/* - * Return pointer to file write method. - */ -TIFFReadWriteProc -TIFFGetWriteProc(TIFF* tif) -{ - return (tif->tif_writeproc); -} - -/* - * Return pointer to file seek method. - */ -TIFFSeekProc -TIFFGetSeekProc(TIFF* tif) -{ - return (tif->tif_seekproc); -} - -/* - * Return pointer to file close method. - */ -TIFFCloseProc -TIFFGetCloseProc(TIFF* tif) -{ - return (tif->tif_closeproc); -} - -/* - * Return pointer to file size requesting method. - */ -TIFFSizeProc -TIFFGetSizeProc(TIFF* tif) -{ - return (tif->tif_sizeproc); -} - -/* - * Return pointer to memory mapping method. - */ -TIFFMapFileProc -TIFFGetMapFileProc(TIFF* tif) -{ - return (tif->tif_mapproc); -} - -/* - * Return pointer to memory unmapping method. - */ -TIFFUnmapFileProc -TIFFGetUnmapFileProc(TIFF* tif) -{ - return (tif->tif_unmapproc); -} - -/* vim: set ts=8 sts=8 sw=8 noet: */ -/* - * Local Variables: - * mode: c - * c-basic-offset: 8 - * fill-column: 78 - * End: - */ - |