diff options
Diffstat (limited to 'third_party')
56 files changed, 21635 insertions, 0 deletions
diff --git a/third_party/BUILD.gn b/third_party/BUILD.gn index f5f0626ea7..c1c63db6b9 100644 --- a/third_party/BUILD.gn +++ b/third_party/BUILD.gn @@ -131,6 +131,71 @@ source_set("fx_lcms2") { ] } +source_set("fx_libjpeg") { + configs -= [ "//build/config/compiler:chromium_code" ] + configs += [ + "//build/config/compiler:no_chromium_code", + "//third_party/pdfium:pdfium_config", + ] + sources = [ + "libjpeg/cderror.h", + "libjpeg/cdjpeg.h", + "libjpeg/fpdfapi_jcapimin.c", + "libjpeg/fpdfapi_jcapistd.c", + "libjpeg/fpdfapi_jccoefct.c", + "libjpeg/fpdfapi_jccolor.c", + "libjpeg/fpdfapi_jcdctmgr.c", + "libjpeg/fpdfapi_jchuff.c", + "libjpeg/fpdfapi_jcinit.c", + "libjpeg/fpdfapi_jcmainct.c", + "libjpeg/fpdfapi_jcmarker.c", + "libjpeg/fpdfapi_jcmaster.c", + "libjpeg/fpdfapi_jcomapi.c", + "libjpeg/fpdfapi_jcparam.c", + "libjpeg/fpdfapi_jcphuff.c", + "libjpeg/fpdfapi_jcprepct.c", + "libjpeg/fpdfapi_jcsample.c", + "libjpeg/fpdfapi_jctrans.c", + "libjpeg/fpdfapi_jdapimin.c", + "libjpeg/fpdfapi_jdapistd.c", + "libjpeg/fpdfapi_jdcoefct.c", + "libjpeg/fpdfapi_jdcolor.c", + "libjpeg/fpdfapi_jddctmgr.c", + "libjpeg/fpdfapi_jdhuff.c", + "libjpeg/fpdfapi_jdinput.c", + "libjpeg/fpdfapi_jdmainct.c", + "libjpeg/fpdfapi_jdmarker.c", + "libjpeg/fpdfapi_jdmaster.c", + "libjpeg/fpdfapi_jdmerge.c", + "libjpeg/fpdfapi_jdphuff.c", + "libjpeg/fpdfapi_jdpostct.c", + "libjpeg/fpdfapi_jdsample.c", + "libjpeg/fpdfapi_jdtrans.c", + "libjpeg/fpdfapi_jerror.c", + "libjpeg/fpdfapi_jfdctfst.c", + "libjpeg/fpdfapi_jfdctint.c", + "libjpeg/fpdfapi_jidctfst.c", + "libjpeg/fpdfapi_jidctint.c", + "libjpeg/fpdfapi_jidctred.c", + "libjpeg/fpdfapi_jmemmgr.c", + "libjpeg/fpdfapi_jmemnobs.c", + "libjpeg/fpdfapi_jutils.c", + "libjpeg/jchuff.h", + "libjpeg/jconfig.h", + "libjpeg/jdct.h", + "libjpeg/jdhuff.h", + "libjpeg/jerror.h", + "libjpeg/jinclude.h", + "libjpeg/jmemsys.h", + "libjpeg/jmorecfg.h", + "libjpeg/jpegint.h", + "libjpeg/jpeglib.h", + "libjpeg/jversion.h", + "libjpeg/makefile", + "libjpeg/transupp.h", + ] +} + component("pdfium_base") { configs -= [ "//build/config/compiler:chromium_code" ] configs += [ diff --git a/third_party/libjpeg/cderror.h b/third_party/libjpeg/cderror.h new file mode 100644 index 0000000000..70435e161c --- /dev/null +++ b/third_party/libjpeg/cderror.h @@ -0,0 +1,132 @@ +/* + * cderror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the cjpeg/djpeg + * applications. These strings are not needed as part of the JPEG library + * proper. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef CDERROR_H +#define CDERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* CDERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */ + +#ifdef BMP_SUPPORTED +JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format") +JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported") +JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length") +JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1") +JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB") +JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported") +JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM") +JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image") +JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image") +JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image") +JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image") +#endif /* BMP_SUPPORTED */ + +#ifdef GIF_SUPPORTED +JMESSAGE(JERR_GIF_BUG, "GIF output got confused") +JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d") +JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB") +JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file") +JMESSAGE(JERR_GIF_NOT, "Not a GIF file") +JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image") +JMESSAGE(JTRC_GIF_BADVERSION, + "Warning: unexpected GIF version number '%c%c%c'") +JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x") +JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input") +JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file") +JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring") +JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image") +JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits") +#endif /* GIF_SUPPORTED */ + +#ifdef PPM_SUPPORTED +JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB") +JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file") +JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file") +JMESSAGE(JTRC_PGM, "%ux%u PGM image") +JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image") +JMESSAGE(JTRC_PPM, "%ux%u PPM image") +JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image") +#endif /* PPM_SUPPORTED */ + +#ifdef RLE_SUPPORTED +JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library") +JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB") +JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE") +JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file") +JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header") +JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header") +JMESSAGE(JERR_RLE_NOT, "Not an RLE file") +JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE") +JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup") +JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file") +JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d") +JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file") +JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d") +JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d") +#endif /* RLE_SUPPORTED */ + +#ifdef TARGA_SUPPORTED +JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format") +JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file") +JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB") +JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image") +JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image") +JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image") +#else +JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled") +#endif /* TARGA_SUPPORTED */ + +JMESSAGE(JERR_BAD_CMAP_FILE, + "Color map file is invalid or of unsupported format") +JMESSAGE(JERR_TOO_MANY_COLORS, + "Output file format cannot handle %d colormap entries") +JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed") +#ifdef TARGA_SUPPORTED +JMESSAGE(JERR_UNKNOWN_FORMAT, + "Unrecognized input file format --- perhaps you need -targa") +#else +JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format") +#endif +JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTADDONCODE +} ADDON_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE diff --git a/third_party/libjpeg/cdjpeg.h b/third_party/libjpeg/cdjpeg.h new file mode 100644 index 0000000000..3d728ee9c7 --- /dev/null +++ b/third_party/libjpeg/cdjpeg.h @@ -0,0 +1,184 @@ +/* + * cdjpeg.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common declarations for the sample applications + * cjpeg and djpeg. It is NOT used by the core JPEG library. + */ + +#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ +#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" /* get library error codes too */ +#include "cderror.h" /* get application-specific error codes */ + + +/* + * Object interface for cjpeg's source file decoding modules + */ + +typedef struct cjpeg_source_struct * cjpeg_source_ptr; + +struct cjpeg_source_struct { + JMETHOD(void, start_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(void, finish_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + + FXSYS_FILE *input_file; + + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * Object interface for djpeg's output file encoding modules + */ + +typedef struct djpeg_dest_struct * djpeg_dest_ptr; + +struct djpeg_dest_struct { + /* start_output is called after jpeg_start_decompress finishes. + * The color map will be ready at this time, if one is needed. + */ + JMETHOD(void, start_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + /* Emit the specified number of pixel rows from the buffer. */ + JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + /* Finish up at the end of the image. */ + JMETHOD(void, finish_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + + /* Target file spec; filled in by djpeg.c after object is created. */ + FXSYS_FILE * output_file; + + /* Output pixel-row buffer. Created by module init or start_output. + * Width is cinfo->output_width * cinfo->output_components; + * height is buffer_height. + */ + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * cjpeg/djpeg may need to perform extra passes to convert to or from + * the source/destination file format. The JPEG library does not know + * about these passes, but we'd like them to be counted by the progress + * monitor. We use an expanded progress monitor object to hold the + * additional pass count. + */ + +struct cdjpeg_progress_mgr { + struct jpeg_progress_mgr pub; /* fields known to JPEG library */ + int completed_extra_passes; /* extra passes completed */ + int total_extra_passes; /* total extra */ + /* last printed percentage stored here to avoid multiple printouts */ + int percent_done; +}; + +typedef struct cdjpeg_progress_mgr * cd_progress_ptr; + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_read_bmp jIRdBMP +#define jinit_write_bmp jIWrBMP +#define jinit_read_gif jIRdGIF +#define jinit_write_gif jIWrGIF +#define jinit_read_ppm jIRdPPM +#define jinit_write_ppm jIWrPPM +#define jinit_read_rle jIRdRLE +#define jinit_write_rle jIWrRLE +#define jinit_read_targa jIRdTarga +#define jinit_write_targa jIWrTarga +#define read_quant_tables RdQTables +#define read_scan_script RdScnScript +#define set_quant_slots SetQSlots +#define set_sample_factors SetSFacts +#define read_color_map RdCMap +#define enable_signal_catcher EnSigCatcher +#define start_progress_monitor StProgMon +#define end_progress_monitor EnProgMon +#define read_stdin RdStdin +#define write_stdout WrStdout +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Module selection routines for I/O modules. */ + +EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, + boolean is_os2)); +EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); + +/* cjpeg support routines (in rdswitch.c) */ + +EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, + int scale_factor, boolean force_baseline)); +EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); +EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); +EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); + +/* djpeg support routines (in rdcolmap.c) */ + +EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FXSYS_FILE * infile)); + +/* common support routines (in cdjpeg.c) */ + +EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); +EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, + cd_progress_ptr progress)); +EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); +EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); +EXTERN(FXSYS_FILE *) read_stdin JPP((void)); +EXTERN(FXSYS_FILE *) write_stdout JPP((void)); + +/* miscellaneous useful macros */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif +#ifndef EXIT_WARNING +#ifdef VMS +#define EXIT_WARNING 1 /* VMS is very nonstandard */ +#else +#define EXIT_WARNING 2 +#endif +#endif diff --git a/third_party/libjpeg/fpdfapi_jcapimin.c b/third_party/libjpeg/fpdfapi_jcapimin.c new file mode 100644 index 0000000000..ec04fd2f15 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcapimin.c @@ -0,0 +1,283 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcapimin.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the compression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-compression case or the transcoding-only + * case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jcapistd.c. But also see jcparam.c for + * parameter-setup helper routines, jcomapi.c for routines shared by + * compression and decompression, and jctrans.c for the transcoding case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG compression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL(void) +jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize) +{ + int i; + + /* Guard against version mismatches between library and caller. */ + cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ + if (version != JPEG_LIB_VERSION) + ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); + if (structsize != SIZEOF(struct jpeg_compress_struct)) + ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, + (int) SIZEOF(struct jpeg_compress_struct), (int) structsize); + + /* For debugging purposes, we zero the whole master structure. + * But the application has already set the err pointer, and may have set + * client_data, so we have to save and restore those fields. + * Note: if application hasn't set client_data, tools like Purify may + * complain here. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + void * client_data = cinfo->client_data; /* ignore Purify complaint here */ + MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct)); + cinfo->err = err; + cinfo->client_data = client_data; + } + cinfo->is_decompressor = FALSE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->dest = NULL; + + cinfo->comp_info = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) + cinfo->quant_tbl_ptrs[i] = NULL; + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + cinfo->script_space = NULL; + + cinfo->input_gamma = 1.0; /* in case application forgets */ + + /* OK, I'm ready */ + cinfo->global_state = CSTATE_START; +} + + +/* + * Destruction of a JPEG compression object + */ + +GLOBAL(void) +jpeg_destroy_compress (j_compress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG compression operation, + * but don't destroy the object itself. + */ + +GLOBAL(void) +jpeg_abort_compress (j_compress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Forcibly suppress or un-suppress all quantization and Huffman tables. + * Marks all currently defined tables as already written (if suppress) + * or not written (if !suppress). This will control whether they get emitted + * by a subsequent jpeg_start_compress call. + * + * This routine is exported for use by applications that want to produce + * abbreviated JPEG datastreams. It logically belongs in jcparam.c, but + * since it is called by jpeg_start_compress, we put it here --- otherwise + * jcparam.o would be linked whether the application used it or not. + */ + +GLOBAL(void) +jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress) +{ + int i; + JQUANT_TBL * qtbl; + JHUFF_TBL * htbl; + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL) + qtbl->sent_table = suppress; + } + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL) + htbl->sent_table = suppress; + if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL) + htbl->sent_table = suppress; + } +} + + +/* + * Finish JPEG compression. + * + * If a multipass operating mode was selected, this may do a great deal of + * work including most of the actual output. + */ + +GLOBAL(void) +jpeg_finish_compress (j_compress_ptr cinfo) +{ + JDIMENSION iMCU_row; + + if (cinfo->global_state == CSTATE_SCANNING || + cinfo->global_state == CSTATE_RAW_OK) { + /* Terminate first pass */ + if (cinfo->next_scanline < cinfo->image_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_pass) (cinfo); + } else if (cinfo->global_state != CSTATE_WRCOEFS) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any remaining passes */ + while (! cinfo->master->is_last_pass) { + (*cinfo->master->prepare_for_pass) (cinfo); + for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) { + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) iMCU_row; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* We bypass the main controller and invoke coef controller directly; + * all work is being done from the coefficient buffer. + */ + if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } + (*cinfo->master->finish_pass) (cinfo); + } + /* Write EOI, do final cleanup */ + (*cinfo->marker->write_file_trailer) (cinfo); + (*cinfo->dest->term_destination) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); +} + + +/* + * Write a special marker. + * This is only recommended for writing COM or APPn markers. + * Must be called after jpeg_start_compress() and before + * first call to jpeg_write_scanlines() or jpeg_write_raw_data(). + */ + +GLOBAL(void) +jpeg_write_marker (j_compress_ptr cinfo, int marker, + const JOCTET *dataptr, unsigned int datalen) +{ + JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val)); + + if (cinfo->next_scanline != 0 || + (cinfo->global_state != CSTATE_SCANNING && + cinfo->global_state != CSTATE_RAW_OK && + cinfo->global_state != CSTATE_WRCOEFS)) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); + write_marker_byte = cinfo->marker->write_marker_byte; /* copy for speed */ + while (datalen--) { + (*write_marker_byte) (cinfo, *dataptr); + dataptr++; + } +} + +/* Same, but piecemeal. */ + +GLOBAL(void) +jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen) +{ + if (cinfo->next_scanline != 0 || + (cinfo->global_state != CSTATE_SCANNING && + cinfo->global_state != CSTATE_RAW_OK && + cinfo->global_state != CSTATE_WRCOEFS)) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); +} + +GLOBAL(void) +jpeg_write_m_byte (j_compress_ptr cinfo, int val) +{ + (*cinfo->marker->write_marker_byte) (cinfo, val); +} + + +/* + * Alternate compression function: just write an abbreviated table file. + * Before calling this, all parameters and a data destination must be set up. + * + * To produce a pair of files containing abbreviated tables and abbreviated + * image data, one would proceed as follows: + * + * initialize JPEG object + * set JPEG parameters + * set destination to table file + * jpeg_write_tables(cinfo); + * set destination to image file + * jpeg_start_compress(cinfo, FALSE); + * write data... + * jpeg_finish_compress(cinfo); + * + * jpeg_write_tables has the side effect of marking all tables written + * (same as jpeg_suppress_tables(..., TRUE)). Thus a subsequent start_compress + * will not re-emit the tables unless it is passed write_all_tables=TRUE. + */ + +GLOBAL(void) +jpeg_write_tables (j_compress_ptr cinfo) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Initialize the marker writer ... bit of a crock to do it here. */ + jinit_marker_writer(cinfo); + /* Write them tables! */ + (*cinfo->marker->write_tables_only) (cinfo); + /* And clean up. */ + (*cinfo->dest->term_destination) (cinfo); + /* + * In library releases up through v6a, we called jpeg_abort() here to free + * any working memory allocated by the destination manager and marker + * writer. Some applications had a problem with that: they allocated space + * of their own from the library memory manager, and didn't want it to go + * away during write_tables. So now we do nothing. This will cause a + * memory leak if an app calls write_tables repeatedly without doing a full + * compression cycle or otherwise resetting the JPEG object. However, that + * seems less bad than unexpectedly freeing memory in the normal case. + * An app that prefers the old behavior can call jpeg_abort for itself after + * each call to jpeg_write_tables(). + */ +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcapistd.c b/third_party/libjpeg/fpdfapi_jcapistd.c new file mode 100644 index 0000000000..9d765e6f01 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcapistd.c @@ -0,0 +1,164 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcapistd.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the compression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-compression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_compress, it will end up linking in the entire compressor. + * We thus must separate this file from jcapimin.c to avoid linking the + * whole compression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Compression initialization. + * Before calling this, all parameters and a data destination must be set up. + * + * We require a write_all_tables parameter as a failsafe check when writing + * multiple datastreams from the same compression object. Since prior runs + * will have left all the tables marked sent_table=TRUE, a subsequent run + * would emit an abbreviated stream (no tables) by default. This may be what + * is wanted, but for safety's sake it should not be the default behavior: + * programmers should have to make a deliberate choice to emit abbreviated + * images. Therefore the documentation and examples should encourage people + * to pass write_all_tables=TRUE; then it will take active thought to do the + * wrong thing. + */ + +GLOBAL(void) +jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (write_all_tables) + jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */ + + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Perform master selection of active modules */ + jinit_compress_master(cinfo); + /* Set up for the first pass */ + (*cinfo->master->prepare_for_pass) (cinfo); + /* Ready for application to drive first pass through jpeg_write_scanlines + * or jpeg_write_raw_data. + */ + cinfo->next_scanline = 0; + cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING); +} + + +/* + * Write some scanlines of data to the JPEG compressor. + * + * The return value will be the number of lines actually written. + * This should be less than the supplied num_lines only in case that + * the data destination module has requested suspension of the compressor, + * or if more than image_height scanlines are passed in. + * + * Note: we warn about excess calls to jpeg_write_scanlines() since + * this likely signals an application programmer error. However, + * excess scanlines passed in the last valid call are *silently* ignored, + * so that the application need not adjust num_lines for end-of-image + * when using a multiple-scanline buffer. + */ + +GLOBAL(JDIMENSION) +jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION num_lines) +{ + JDIMENSION row_ctr, rows_left; + + if (cinfo->global_state != CSTATE_SCANNING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->next_scanline >= cinfo->image_height) + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->next_scanline; + cinfo->progress->pass_limit = (long) cinfo->image_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Give master control module another chance if this is first call to + * jpeg_write_scanlines. This lets output of the frame/scan headers be + * delayed so that application can write COM, etc, markers between + * jpeg_start_compress and jpeg_write_scanlines. + */ + if (cinfo->master->call_pass_startup) + (*cinfo->master->pass_startup) (cinfo); + + /* Ignore any extra scanlines at bottom of image. */ + rows_left = cinfo->image_height - cinfo->next_scanline; + if (num_lines > rows_left) + num_lines = rows_left; + + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines); + cinfo->next_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to write raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL(JDIMENSION) +jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION num_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != CSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->next_scanline >= cinfo->image_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->next_scanline; + cinfo->progress->pass_limit = (long) cinfo->image_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Give master control module another chance if this is first call to + * jpeg_write_raw_data. This lets output of the frame/scan headers be + * delayed so that application can write COM, etc, markers between + * jpeg_start_compress and jpeg_write_raw_data. + */ + if (cinfo->master->call_pass_startup) + (*cinfo->master->pass_startup) (cinfo); + + /* Verify that at least one iMCU row has been passed. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; + if (num_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Directly compress the row. */ + if (! (*cinfo->coef->compress_data) (cinfo, data)) { + /* If compressor did not consume the whole row, suspend processing. */ + return 0; + } + + /* OK, we processed one iMCU row. */ + cinfo->next_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jccoefct.c b/third_party/libjpeg/fpdfapi_jccoefct.c new file mode 100644 index 0000000000..08910ef6f3 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jccoefct.c @@ -0,0 +1,452 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jccoefct.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for compression. + * This controller is the top level of the JPEG compressor proper. + * The coefficient buffer lies between forward-DCT and entropy encoding steps. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* We use a full-image coefficient buffer when doing Huffman optimization, + * and also for writing multiple-scan JPEG files. In all cases, the DCT + * step is run during the first pass, and subsequent passes need only read + * the buffered coefficients. + */ +#ifdef ENTROPY_OPT_SUPPORTED +#define FULL_COEF_BUFFER_SUPPORTED +#else +#ifdef C_MULTISCAN_FILES_SUPPORTED +#define FULL_COEF_BUFFER_SUPPORTED +#endif +#endif + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_coef_controller pub; /* public fields */ + + JDIMENSION iMCU_row_num; /* iMCU row # within image */ + JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* For single-pass compression, it's sufficient to buffer just one MCU + * (although this may prove a bit slow in practice). We allocate a + * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each + * MCU constructed and sent. (On 80x86, the workspace is FAR even though + * it's not really very big; this is to keep the module interfaces unchanged + * when a large coefficient buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays. + */ + JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; + + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + + +/* Forward declarations */ +METHODDEF(boolean) compress_data + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +#ifdef FULL_COEF_BUFFER_SUPPORTED +METHODDEF(boolean) compress_first_pass + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +METHODDEF(boolean) compress_output + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +#endif + + +LOCAL(void) +start_iMCU_row (j_compress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->mcu_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + coef->iMCU_row_num = 0; + start_iMCU_row(cinfo); + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (coef->whole_image[0] != NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_data; + break; +#ifdef FULL_COEF_BUFFER_SUPPORTED + case JBUF_SAVE_AND_PASS: + if (coef->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_first_pass; + break; + case JBUF_CRANK_DEST: + if (coef->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_output; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data in the single-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the image. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf contains a plane for each component in image, + * which we index according to the component's SOF position. + */ + +METHODDEF(boolean) +compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, bi, ci, yindex, yoffset, blockcnt; + JDIMENSION ypos, xpos; + jpeg_component_info *compptr; + + /* Loop to write as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Determine where data comes from in input_buf and do the DCT thing. + * Each call on forward_DCT processes a horizontal row of DCT blocks + * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks + * sequentially. Dummy blocks at the right or bottom edge are filled in + * specially. The data in them does not matter for image reconstruction, + * so we fill them with values that will encode to the smallest amount of + * data, viz: all zeroes in the AC entries, DC entries equal to previous + * block's DC value. (Thanks to Thomas Kinsman for this idea.) + */ + blkn = 0; + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + xpos = MCU_col_num * compptr->MCU_sample_width; + ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */ + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (coef->iMCU_row_num < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + (*cinfo->fdct->forward_DCT) (cinfo, compptr, + input_buf[compptr->component_index], + coef->MCU_buffer[blkn], + ypos, xpos, (JDIMENSION) blockcnt); + if (blockcnt < compptr->MCU_width) { + /* Create some dummy blocks at the right edge of the image. */ + jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt], + (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); + for (bi = blockcnt; bi < compptr->MCU_width; bi++) { + coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; + } + } + } else { + /* Create a row of dummy blocks at the bottom of the image. */ + jzero_far((void FAR *) coef->MCU_buffer[blkn], + compptr->MCU_width * SIZEOF(JBLOCK)); + for (bi = 0; bi < compptr->MCU_width; bi++) { + coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; + } + } + blkn += compptr->MCU_width; + ypos += DCTSIZE; + } + } + /* Try to write the MCU. In event of a suspension failure, we will + * re-DCT the MCU on restart (a bit inefficient, could be fixed...) + */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + + +#ifdef FULL_COEF_BUFFER_SUPPORTED + +/* + * Process some data in the first pass of a multi-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the image. + * This amount of data is read from the source buffer, DCT'd and quantized, + * and saved into the virtual arrays. We also generate suitable dummy blocks + * as needed at the right and lower edges. (The dummy blocks are constructed + * in the virtual arrays, which have been padded appropriately.) This makes + * it possible for subsequent passes not to worry about real vs. dummy blocks. + * + * We must also emit the data to the entropy encoder. This is conveniently + * done by calling compress_output() after we've loaded the current strip + * of the virtual arrays. + * + * NB: input_buf contains a plane for each component in image. All + * components are DCT'd and loaded into the virtual arrays in this pass. + * However, it may be that only a subset of the components are emitted to + * the entropy encoder during this first pass; be careful about looking + * at the scan-dependent variables (MCU dimensions, etc). + */ + +METHODDEF(boolean) +compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION blocks_across, MCUs_across, MCUindex; + int bi, ci, h_samp_factor, block_row, block_rows, ndummy; + JCOEF lastDC; + jpeg_component_info *compptr; + JBLOCKARRAY buffer; + JBLOCKROW thisblockrow, lastblockrow; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (coef->iMCU_row_num < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here, since may not be set! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + blocks_across = compptr->width_in_blocks; + h_samp_factor = compptr->h_samp_factor; + /* Count number of dummy blocks to be added at the right margin. */ + ndummy = (int) (blocks_across % h_samp_factor); + if (ndummy > 0) + ndummy = h_samp_factor - ndummy; + /* Perform DCT for all non-dummy blocks in this iMCU row. Each call + * on forward_DCT processes a complete horizontal row of DCT blocks. + */ + for (block_row = 0; block_row < block_rows; block_row++) { + thisblockrow = buffer[block_row]; + (*cinfo->fdct->forward_DCT) (cinfo, compptr, + input_buf[ci], thisblockrow, + (JDIMENSION) (block_row * DCTSIZE), + (JDIMENSION) 0, blocks_across); + if (ndummy > 0) { + /* Create dummy blocks at the right edge of the image. */ + thisblockrow += blocks_across; /* => first dummy block */ + jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); + lastDC = thisblockrow[-1][0]; + for (bi = 0; bi < ndummy; bi++) { + thisblockrow[bi][0] = lastDC; + } + } + } + /* If at end of image, create dummy block rows as needed. + * The tricky part here is that within each MCU, we want the DC values + * of the dummy blocks to match the last real block's DC value. + * This squeezes a few more bytes out of the resulting file... + */ + if (coef->iMCU_row_num == last_iMCU_row) { + blocks_across += ndummy; /* include lower right corner */ + MCUs_across = blocks_across / h_samp_factor; + for (block_row = block_rows; block_row < compptr->v_samp_factor; + block_row++) { + thisblockrow = buffer[block_row]; + lastblockrow = buffer[block_row-1]; + jzero_far((void FAR *) thisblockrow, + (size_t) (blocks_across * SIZEOF(JBLOCK))); + for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { + lastDC = lastblockrow[h_samp_factor-1][0]; + for (bi = 0; bi < h_samp_factor; bi++) { + thisblockrow[bi][0] = lastDC; + } + thisblockrow += h_samp_factor; /* advance to next MCU in row */ + lastblockrow += h_samp_factor; + } + } + } + } + /* NB: compress_output will increment iMCU_row_num if successful. + * A suspension return will result in redoing all the work above next time. + */ + + /* Emit data to the entropy encoder, sharing code with subsequent passes */ + return compress_output(cinfo, input_buf); +} + + +/* + * Process some data in subsequent passes of a multi-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the scan. + * The data is obtained from the virtual arrays and fed to the entropy coder. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf is ignored; it is likely to be a NULL pointer. + */ + +METHODDEF(boolean) +compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. + * NB: during first pass, this is safe only because the buffers will + * already be aligned properly, so jmemmgr.c won't need to do any I/O. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to write the MCU. */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + +#endif /* FULL_COEF_BUFFER_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL(void) +jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_c_coef_controller *) coef; + coef->pub.start_pass = start_pass_coef; + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef FULL_COEF_BUFFER_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + int ci; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) compptr->v_samp_factor); + } +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + coef->whole_image[0] = NULL; /* flag for no virtual arrays */ + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jccolor.c b/third_party/libjpeg/fpdfapi_jccolor.c new file mode 100644 index 0000000000..809a05b5a1 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jccolor.c @@ -0,0 +1,462 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jccolor.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_converter pub; /* public fields */ + + /* Private state for RGB->YCC conversion */ + INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ +} my_color_converter; + +typedef my_color_converter * my_cconvert_ptr; + + +/**************** RGB -> YCbCr conversion: most common case **************/ + +/* + * YCbCr is defined per CCIR 601-1, except that Cb and Cr are + * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * The conversion equations to be implemented are therefore + * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B + * Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE + * Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE + * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) + * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2, + * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and + * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0) + * were not represented exactly. Now we sacrifice exact representation of + * maximum red and maximum blue in order to get exact grayscales. + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times R,G,B for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 12-bit samples it is still acceptable. It's not very reasonable for + * 16-bit samples, but if you want lossless storage you shouldn't be changing + * colorspace anyway. + * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included + * in the tables to save adding them separately in the inner loop. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define CBCR_OFFSET ((INT32) CENTERJSAMPLE << SCALEBITS) +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<<SCALEBITS) + 0.5)) + +/* We allocate one big table and divide it up into eight parts, instead of + * doing eight alloc_small requests. This lets us use a single table base + * address, which can be held in a register in the inner loops on many + * machines (more than can hold all eight addresses, anyway). + */ + +#define R_Y_OFF 0 /* offset to R => Y section */ +#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ +#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ +#define R_CB_OFF (3*(MAXJSAMPLE+1)) +#define G_CB_OFF (4*(MAXJSAMPLE+1)) +#define B_CB_OFF (5*(MAXJSAMPLE+1)) +#define R_CR_OFF B_CB_OFF /* B=>Cb, R=>Cr are the same */ +#define G_CR_OFF (6*(MAXJSAMPLE+1)) +#define B_CR_OFF (7*(MAXJSAMPLE+1)) +#define TABLE_SIZE (8*(MAXJSAMPLE+1)) + + +/* + * Initialize for RGB->YCC colorspace conversion. + */ + +METHODDEF(void) +rgb_ycc_start (j_compress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + INT32 * rgb_ycc_tab; + INT32 i; + + /* Allocate and fill in the conversion tables. */ + cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (TABLE_SIZE * SIZEOF(INT32))); + + for (i = 0; i <= MAXJSAMPLE; i++) { + rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i; + rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i; + rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; + rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i; + rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i; + /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr. + * This ensures that the maximum output will round to MAXJSAMPLE + * not MAXJSAMPLE+1, and thus that we don't have to range-limit. + */ + rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; +/* B=>Cb and R=>Cr tables are the same + rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; +*/ + rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i; + rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i; + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * + * Note that we change from the application's interleaved-pixel format + * to our internal noninterleaved, one-plane-per-component format. + * The input buffer is therefore three times as wide as the output buffer. + * + * A starting row offset is provided only for the output buffer. The caller + * can easily adjust the passed input_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +rgb_ycc_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int r, g, b; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + inptr += RGB_PIXELSIZE; + /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations + * must be too; we do not need an explicit range-limiting operation. + * Hence the value being shifted is never negative, and we don't + * need the general RIGHT_SHIFT macro. + */ + /* Y */ + outptr0[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + /* Cb */ + outptr1[col] = (JSAMPLE) + ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) + >> SCALEBITS); + /* Cr */ + outptr2[col] = (JSAMPLE) + ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) + >> SCALEBITS); + } + } +} + + +/**************** Cases other than RGB -> YCbCr **************/ + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles RGB->grayscale conversion, which is the same + * as the RGB->Y portion of RGB->YCbCr. + * We assume rgb_ycc_start has been called (we only use the Y tables). + */ + +METHODDEF(void) +rgb_gray_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int r, g, b; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + inptr += RGB_PIXELSIZE; + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles Adobe-style CMYK->YCCK conversion, + * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same + * conversion as above, while passing K (black) unchanged. + * We assume rgb_ycc_start has been called. + */ + +METHODDEF(void) +cmyk_ycck_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int r, g, b; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2, outptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + outptr3 = output_buf[3][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = MAXJSAMPLE - GETJSAMPLE(inptr[0]); + g = MAXJSAMPLE - GETJSAMPLE(inptr[1]); + b = MAXJSAMPLE - GETJSAMPLE(inptr[2]); + /* K passes through as-is */ + outptr3[col] = inptr[3]; /* don't need GETJSAMPLE here */ + inptr += 4; + /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations + * must be too; we do not need an explicit range-limiting operation. + * Hence the value being shifted is never negative, and we don't + * need the general RIGHT_SHIFT macro. + */ + /* Y */ + outptr0[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + /* Cb */ + outptr1[col] = (JSAMPLE) + ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) + >> SCALEBITS); + /* Cr */ + outptr2[col] = (JSAMPLE) + ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles grayscale output with no conversion. + * The source can be either plain grayscale or YCbCr (since Y == gray). + */ + +METHODDEF(void) +grayscale_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + int instride = cinfo->input_components; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */ + inptr += instride; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles multi-component colorspaces without conversion. + * We assume input_components == num_components. + */ + +METHODDEF(void) +null_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + register int ci; + int nc = cinfo->num_components; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + /* It seems fastest to make a separate pass for each component. */ + for (ci = 0; ci < nc; ci++) { + inptr = *input_buf; + outptr = output_buf[ci][output_row]; + for (col = 0; col < num_cols; col++) { + outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */ + inptr += nc; + } + } + input_buf++; + output_row++; + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +null_method (j_compress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for input colorspace conversion. + */ + +GLOBAL(void) +jinit_color_converter (j_compress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_converter)); + cinfo->cconvert = (struct jpeg_color_converter *) cconvert; + /* set start_pass to null method until we find out differently */ + cconvert->pub.start_pass = null_method; + + /* Make sure input_components agrees with in_color_space */ + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + if (cinfo->input_components != 1) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_RGB: +#if RGB_PIXELSIZE != 3 + if (cinfo->input_components != RGB_PIXELSIZE) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; +#endif /* else share code with YCbCr */ + + case JCS_YCbCr: + if (cinfo->input_components != 3) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->input_components != 4) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->input_components < 1) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + } + + /* Check num_components, set conversion method based on requested space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_GRAYSCALE) + cconvert->pub.color_convert = grayscale_convert; + else if (cinfo->in_color_space == JCS_RGB) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_gray_convert; + } else if (cinfo->in_color_space == JCS_YCbCr) + cconvert->pub.color_convert = grayscale_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_RGB: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_YCbCr: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_RGB) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_ycc_convert; + } else if (cinfo->in_color_space == JCS_YCbCr) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_CMYK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_CMYK) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_CMYK) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = cmyk_ycck_convert; + } else if (cinfo->in_color_space == JCS_YCCK) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + default: /* allow null conversion of JCS_UNKNOWN */ + if (cinfo->jpeg_color_space != cinfo->in_color_space || + cinfo->num_components != cinfo->input_components) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + cconvert->pub.color_convert = null_convert; + break; + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcdctmgr.c b/third_party/libjpeg/fpdfapi_jcdctmgr.c new file mode 100644 index 0000000000..cbd7d11207 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcdctmgr.c @@ -0,0 +1,390 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcdctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the forward-DCT management logic. + * This code selects a particular DCT implementation to be used, + * and it performs related housekeeping chores including coefficient + * quantization. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_forward_dct pub; /* public fields */ + + /* Pointer to the DCT routine actually in use */ + forward_DCT_method_ptr do_dct; + + /* The actual post-DCT divisors --- not identical to the quant table + * entries, because of scaling (especially for an unnormalized DCT). + * Each table is given in normal array order. + */ + DCTELEM * divisors[NUM_QUANT_TBLS]; + +#ifdef DCT_FLOAT_SUPPORTED + /* Same as above for the floating-point case. */ + float_DCT_method_ptr do_float_dct; + FAST_FLOAT * float_divisors[NUM_QUANT_TBLS]; +#endif +} my_fdct_controller; + +typedef my_fdct_controller * my_fdct_ptr; + + +/* + * Initialize for a processing pass. + * Verify that all referenced Q-tables are present, and set up + * the divisor table for each one. + * In the current implementation, DCT of all components is done during + * the first pass, even if only some components will be output in the + * first scan. Hence all components should be examined here. + */ + +METHODDEF(void) +start_pass_fdctmgr (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + int ci, qtblno, i; + jpeg_component_info *compptr; + JQUANT_TBL * qtbl; + DCTELEM * dtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + qtblno = compptr->quant_tbl_no; + /* Make sure specified quantization table is present */ + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + qtbl = cinfo->quant_tbl_ptrs[qtblno]; + /* Compute divisors for this quant table */ + /* We may do this more than once for same table, but it's not a big deal */ + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + /* For LL&M IDCT method, divisors are equal to raw quantization + * coefficients multiplied by 8 (to counteract scaling). + */ + if (fdct->divisors[qtblno] == NULL) { + fdct->divisors[qtblno] = (DCTELEM *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(DCTELEM)); + } + dtbl = fdct->divisors[qtblno]; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3; + } + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + */ +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + if (fdct->divisors[qtblno] == NULL) { + fdct->divisors[qtblno] = (DCTELEM *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(DCTELEM)); + } + dtbl = fdct->divisors[qtblno]; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = (DCTELEM) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-3); + } + } + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + * What's actually stored is 1/divisor so that the inner loop can + * use a multiplication rather than a division. + */ + FAST_FLOAT * fdtbl; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + if (fdct->float_divisors[qtblno] == NULL) { + fdct->float_divisors[qtblno] = (FAST_FLOAT *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(FAST_FLOAT)); + } + fdtbl = fdct->float_divisors[qtblno]; + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fdtbl[i] = (FAST_FLOAT) + (1.0 / (((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col] * 8.0))); + i++; + } + } + } + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Perform forward DCT on one or more blocks of a component. + * + * The input samples are taken from the sample_data[] array starting at + * position start_row/start_col, and moving to the right for any additional + * blocks. The quantized coefficients are returned in coef_blocks[]. + */ + +METHODDEF(void) +forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks) +/* This version is used for integer DCT implementations. */ +{ + /* This routine is heavily used, so it's worth coding it tightly. */ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + forward_DCT_method_ptr do_dct = fdct->do_dct; + DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no]; + DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */ + JDIMENSION bi; + + sample_data += start_row; /* fold in the vertical offset once */ + + for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { + /* Load data into workspace, applying unsigned->signed conversion */ + { register DCTELEM *workspaceptr; + register JSAMPROW elemptr; + register int elemr; + + workspaceptr = workspace; + for (elemr = 0; elemr < DCTSIZE; elemr++) { + elemptr = sample_data[elemr] + start_col; +#if DCTSIZE == 8 /* unroll the inner loop */ + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; +#else + { register int elemc; + for (elemc = DCTSIZE; elemc > 0; elemc--) { + *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE; + } + } +#endif + } + } + + /* Perform the DCT */ + (*do_dct) (workspace); + + /* Quantize/descale the coefficients, and store into coef_blocks[] */ + { register DCTELEM temp, qval; + register int i; + register JCOEFPTR output_ptr = coef_blocks[bi]; + + for (i = 0; i < DCTSIZE2; i++) { + qval = divisors[i]; + temp = workspace[i]; + /* Divide the coefficient value by qval, ensuring proper rounding. + * Since C does not specify the direction of rounding for negative + * quotients, we have to force the dividend positive for portability. + * + * In most files, at least half of the output values will be zero + * (at default quantization settings, more like three-quarters...) + * so we should ensure that this case is fast. On many machines, + * a comparison is enough cheaper than a divide to make a special test + * a win. Since both inputs will be nonnegative, we need only test + * for a < b to discover whether a/b is 0. + * If your machine's division is fast enough, define FAST_DIVIDE. + */ +#ifdef FAST_DIVIDE +#define DIVIDE_BY(a,b) a /= b +#else +#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 +#endif + if (temp < 0) { + temp = -temp; + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + temp = -temp; + } else { + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + } + output_ptr[i] = (JCOEF) temp; + } + } + } +} + + +#ifdef DCT_FLOAT_SUPPORTED + +METHODDEF(void) +forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks) +/* This version is used for floating-point DCT implementations. */ +{ + /* This routine is heavily used, so it's worth coding it tightly. */ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + float_DCT_method_ptr do_dct = fdct->do_float_dct; + FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no]; + FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */ + JDIMENSION bi; + + sample_data += start_row; /* fold in the vertical offset once */ + + for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) { + /* Load data into workspace, applying unsigned->signed conversion */ + { register FAST_FLOAT *workspaceptr; + register JSAMPROW elemptr; + register int elemr; + + workspaceptr = workspace; + for (elemr = 0; elemr < DCTSIZE; elemr++) { + elemptr = sample_data[elemr] + start_col; +#if DCTSIZE == 8 /* unroll the inner loop */ + *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); + *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); + *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); + *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); + *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); + *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); + *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); + *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); +#else + { register int elemc; + for (elemc = DCTSIZE; elemc > 0; elemc--) { + *workspaceptr++ = (FAST_FLOAT) + (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE); + } + } +#endif + } + } + + /* Perform the DCT */ + (*do_dct) (workspace); + + /* Quantize/descale the coefficients, and store into coef_blocks[] */ + { register FAST_FLOAT temp; + register int i; + register JCOEFPTR output_ptr = coef_blocks[bi]; + + for (i = 0; i < DCTSIZE2; i++) { + /* Apply the quantization and scaling factor */ + temp = workspace[i] * divisors[i]; + /* Round to nearest integer. + * Since C does not specify the direction of rounding for negative + * quotients, we have to force the dividend positive for portability. + * The maximum coefficient size is +-16K (for 12-bit data), so this + * code should work for either 16-bit or 32-bit ints. + */ + output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384); + } + } + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ + + +/* + * Initialize FDCT manager. + */ + +GLOBAL(void) +jinit_forward_dct (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct; + int i; + + fdct = (my_fdct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_fdct_controller)); + cinfo->fdct = (struct jpeg_forward_dct *) fdct; + fdct->pub.start_pass = start_pass_fdctmgr; + + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + fdct->pub.forward_DCT = forward_DCT; + fdct->do_dct = jpeg_fdct_islow; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + fdct->pub.forward_DCT = forward_DCT; + fdct->do_dct = jpeg_fdct_ifast; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + fdct->pub.forward_DCT = forward_DCT_float; + fdct->do_float_dct = jpeg_fdct_float; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + + /* Mark divisor tables unallocated */ + for (i = 0; i < NUM_QUANT_TBLS; i++) { + fdct->divisors[i] = NULL; +#ifdef DCT_FLOAT_SUPPORTED + fdct->float_divisors[i] = NULL; +#endif + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jchuff.c b/third_party/libjpeg/fpdfapi_jchuff.c new file mode 100644 index 0000000000..2a65aa253b --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jchuff.c @@ -0,0 +1,915 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jchuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy encoding routines. + * + * Much of the complexity here has to do with supporting output suspension. + * If the data destination module demands suspension, we want to be able to + * back up to the start of the current MCU. To do this, we copy state + * variables into local working storage, and update them back to the + * permanent JPEG objects only upon successful completion of an MCU. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jchuff.h" /* Declarations shared with jcphuff.c */ + +#ifdef _FX_MANAGED_CODE_ +#define savable_state savable_state_c +#endif + +/* Expanded entropy encoder object for Huffman encoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + INT32 put_buffer; /* current bit-accumulation buffer */ + int put_bits; /* # of bits now in it */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).put_buffer = (src).put_buffer, \ + (dest).put_bits = (src).put_bits, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + savable_state saved; /* Bit buffer & DC state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + +#ifdef ENTROPY_OPT_SUPPORTED /* Statistics tables for optimization */ + long * dc_count_ptrs[NUM_HUFF_TBLS]; + long * ac_count_ptrs[NUM_HUFF_TBLS]; +#endif +} huff_entropy_encoder; + +typedef huff_entropy_encoder * huff_entropy_ptr; + +/* Working state while writing an MCU. + * This struct contains all the fields that are needed by subroutines. + */ + +typedef struct { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + savable_state cur; /* Current bit buffer & DC state */ + j_compress_ptr cinfo; /* dump_buffer needs access to this */ +} working_state; + + +/* Forward declarations */ +METHODDEF(boolean) encode_mcu_huff JPP((j_compress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(void) finish_pass_huff JPP((j_compress_ptr cinfo)); +#ifdef ENTROPY_OPT_SUPPORTED +METHODDEF(boolean) encode_mcu_gather JPP((j_compress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(void) finish_pass_gather JPP((j_compress_ptr cinfo)); +#endif + + +/* + * Initialize for a Huffman-compressed scan. + * If gather_statistics is TRUE, we do not output anything during the scan, + * just count the Huffman symbols used and generate Huffman code tables. + */ + +METHODDEF(void) +start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, dctbl, actbl; + jpeg_component_info * compptr; + + if (gather_statistics) { +#ifdef ENTROPY_OPT_SUPPORTED + entropy->pub.encode_mcu = encode_mcu_gather; + entropy->pub.finish_pass = finish_pass_gather; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + entropy->pub.encode_mcu = encode_mcu_huff; + entropy->pub.finish_pass = finish_pass_huff; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + dctbl = compptr->dc_tbl_no; + actbl = compptr->ac_tbl_no; + if (gather_statistics) { +#ifdef ENTROPY_OPT_SUPPORTED + /* Check for invalid table indexes */ + /* (make_c_derived_tbl does this in the other path) */ + if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl); + if (actbl < 0 || actbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl); + /* Allocate and zero the statistics tables */ + /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ + if (entropy->dc_count_ptrs[dctbl] == NULL) + entropy->dc_count_ptrs[dctbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * SIZEOF(long)); + if (entropy->ac_count_ptrs[actbl] == NULL) + entropy->ac_count_ptrs[actbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->ac_count_ptrs[actbl], 257 * SIZEOF(long)); +#endif + } else { + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl, + & entropy->dc_derived_tbls[dctbl]); + jpeg_make_c_derived_tbl(cinfo, FALSE, actbl, + & entropy->ac_derived_tbls[actbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Initialize bit buffer to empty */ + entropy->saved.put_buffer = 0; + entropy->saved.put_bits = 0; + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + * + * Note this is also used by jcphuff.c. + */ + +GLOBAL(void) +jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno, + c_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + c_derived_tbl *dtbl; + int p, i, l, lastp, _si, maxsymbol; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (c_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(c_derived_tbl)); + dtbl = *pdtbl; + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + lastp = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + _si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == _si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << _si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + _si++; + } + + /* Figure C.3: generate encoding tables */ + /* These are code and size indexed by symbol value */ + + /* Set all codeless symbols to have code length 0; + * this lets us detect duplicate VAL entries here, and later + * allows emit_bits to detect any attempt to emit such symbols. + */ + MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); + + /* This is also a convenient place to check for out-of-range + * and duplicated VAL entries. We allow 0..255 for AC symbols + * but only 0..15 for DC. (We could constrain them further + * based on data depth and mode, but this seems enough.) + */ + maxsymbol = isDC ? 15 : 255; + + for (p = 0; p < lastp; p++) { + i = htbl->huffval[p]; + if (i < 0 || i > maxsymbol || dtbl->ehufsi[i]) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + dtbl->ehufco[i] = huffcode[p]; + dtbl->ehufsi[i] = huffsize[p]; + } +} + + +/* Outputting bytes to the file */ + +/* Emit a byte, taking 'action' if must suspend. */ +#define emit_byte(state,val,action) \ + { *(state)->next_output_byte++ = (JOCTET) (val); \ + if (--(state)->free_in_buffer == 0) \ + if (! dump_buffer(state)) \ + { action; } } + + +LOCAL(boolean) +dump_buffer (working_state * state) +/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ +{ + struct jpeg_destination_mgr * dest = state->cinfo->dest; + + if (! (*dest->empty_output_buffer) (state->cinfo)) + return FALSE; + /* After a successful buffer dump, must reset buffer pointers */ + state->next_output_byte = dest->next_output_byte; + state->free_in_buffer = dest->free_in_buffer; + return TRUE; +} + + +/* Outputting bits to the file */ + +/* Only the right 24 bits of put_buffer are used; the valid bits are + * left-justified in this part. At most 16 bits can be passed to emit_bits + * in one call, and we never retain more than 7 bits in put_buffer + * between calls, so 24 bits are sufficient. + */ + +INLINE +LOCAL(boolean) +emit_bits (working_state * state, unsigned int code, int size) +/* Emit some bits; return TRUE if successful, FALSE if must suspend */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer = (INT32) code; + register int put_bits = state->cur.put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); + + put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */ + + put_bits += size; /* new number of bits in buffer */ + + put_buffer <<= 24 - put_bits; /* align incoming bits */ + + put_buffer |= state->cur.put_buffer; /* and merge with old buffer contents */ + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte(state, c, return FALSE); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte(state, 0, return FALSE); + } + put_buffer <<= 8; + put_bits -= 8; + } + + state->cur.put_buffer = put_buffer; /* update state variables */ + state->cur.put_bits = put_bits; + + return TRUE; +} + + +LOCAL(boolean) +flush_bits (working_state * state) +{ + if (! emit_bits(state, 0x7F, 7)) /* fill any partial byte with ones */ + return FALSE; + state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ + state->cur.put_bits = 0; + return TRUE; +} + + +/* Encode a single block's worth of coefficients */ + +LOCAL(boolean) +encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, + c_derived_tbl *dctbl, c_derived_tbl *actbl) +{ + register int temp, temp2; + register int nbits; + register int k, r, i; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = temp2 = block[0] - last_dc_val; + + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit the Huffman-coded symbol for the number of bits */ + if (! emit_bits(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + if (! emit_bits(state, (unsigned int) temp2, nbits)) + return FALSE; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k < DCTSIZE2; k++) { + if ((temp = block[jpeg_natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + if (! emit_bits(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) + return FALSE; + r -= 16; + } + + temp2 = temp; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit Huffman symbol for run length / number of bits */ + i = (r << 4) + nbits; + if (! emit_bits(state, actbl->ehufco[i], actbl->ehufsi[i])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (! emit_bits(state, (unsigned int) temp2, nbits)) + return FALSE; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + if (! emit_bits(state, actbl->ehufco[0], actbl->ehufsi[0])) + return FALSE; + + return TRUE; +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(boolean) +emit_restart (working_state * state, int restart_num) +{ + int ci; + + if (! flush_bits(state)) + return FALSE; + + emit_byte(state, 0xFF, return FALSE); + emit_byte(state, JPEG_RST0 + restart_num, return FALSE); + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) + state->cur.last_dc_val[ci] = 0; + + /* The restart counter is not updated until we successfully write the MCU. */ + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of Huffman-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + int blkn, ci; + jpeg_component_info * compptr; + + /* Load up working state */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! emit_restart(&state, entropy->next_restart_num)) + return FALSE; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + if (! encode_one_block(&state, + MCU_data[blkn][0], state.cur.last_dc_val[ci], + entropy->dc_derived_tbls[compptr->dc_tbl_no], + entropy->ac_derived_tbls[compptr->ac_tbl_no])) + return FALSE; + /* Update last_dc_val */ + state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + /* Completed MCU, so update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * Finish up at the end of a Huffman-compressed scan. + */ + +METHODDEF(void) +finish_pass_huff (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + + /* Load up working state ... flush_bits needs it */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Flush out the last data */ + if (! flush_bits(&state)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); +} + + +/* + * Huffman coding optimization. + * + * We first scan the supplied data and count the number of uses of each symbol + * that is to be Huffman-coded. (This process MUST agree with the code above.) + * Then we build a Huffman coding tree for the observed counts. + * Symbols which are not needed at all for the particular image are not + * assigned any code, which saves space in the DHT marker as well as in + * the compressed data. + */ + +#ifdef ENTROPY_OPT_SUPPORTED + + +/* Process a single block's worth of coefficients */ + +LOCAL(void) +htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, + long dc_counts[], long ac_counts[]) +{ + register int temp; + register int nbits; + register int k, r; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = block[0] - last_dc_val; + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count the Huffman symbol for the number of bits */ + dc_counts[nbits]++; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k < DCTSIZE2; k++) { + if ((temp = block[jpeg_natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + ac_counts[0xF0]++; + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count Huffman symbol for run length / number of bits */ + ac_counts[(r << 4) + nbits]++; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + ac_counts[0]++; +} + + +/* + * Trial-encode one MCU's worth of Huffman-compressed coefficients. + * No data is actually output, so no suspension return is possible. + */ + +METHODDEF(boolean) +encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn, ci; + jpeg_component_info * compptr; + + /* Take care of restart intervals if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Update restart state */ + entropy->restarts_to_go = cinfo->restart_interval; + } + entropy->restarts_to_go--; + } + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci], + entropy->dc_count_ptrs[compptr->dc_tbl_no], + entropy->ac_count_ptrs[compptr->ac_tbl_no]); + entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + return TRUE; +} + + +/* + * Generate the best Huffman code table for the given counts, fill htbl. + * Note this is also used by jcphuff.c. + * + * The JPEG standard requires that no symbol be assigned a codeword of all + * one bits (so that padding bits added at the end of a compressed segment + * can't look like a valid code). Because of the canonical ordering of + * codewords, this just means that there must be an unused slot in the + * longest codeword length category. Section K.2 of the JPEG spec suggests + * reserving such a slot by pretending that symbol 256 is a valid symbol + * with count 1. In theory that's not optimal; giving it count zero but + * including it in the symbol set anyway should give a better Huffman code. + * But the theoretically better code actually seems to come out worse in + * practice, because it produces more all-ones bytes (which incur stuffed + * zero bytes in the final file). In any case the difference is tiny. + * + * The JPEG standard requires Huffman codes to be no more than 16 bits long. + * If some symbols have a very small but nonzero probability, the Huffman tree + * must be adjusted to meet the code length restriction. We currently use + * the adjustment method suggested in JPEG section K.2. This method is *not* + * optimal; it may not choose the best possible limited-length code. But + * typically only very-low-frequency symbols will be given less-than-optimal + * lengths, so the code is almost optimal. Experimental comparisons against + * an optimal limited-length-code algorithm indicate that the difference is + * microscopic --- usually less than a hundredth of a percent of total size. + * So the extra complexity of an optimal algorithm doesn't seem worthwhile. + */ + +GLOBAL(void) +jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) +{ +#define MAX_CLEN 32 /* assumed maximum initial code length */ + UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ + int codesize[257]; /* codesize[k] = code length of symbol k */ + int others[257]; /* next symbol in current branch of tree */ + int c1, c2; + int p, i, j; + long v; + + /* This algorithm is explained in section K.2 of the JPEG standard */ + + MEMZERO(bits, SIZEOF(bits)); + MEMZERO(codesize, SIZEOF(codesize)); + for (i = 0; i < 257; i++) + others[i] = -1; /* init links to empty */ + + freq[256] = 1; /* make sure 256 has a nonzero count */ + /* Including the pseudo-symbol 256 in the Huffman procedure guarantees + * that no real symbol is given code-value of all ones, because 256 + * will be placed last in the largest codeword category. + */ + + /* Huffman's basic algorithm to assign optimal code lengths to symbols */ + + for (;;) { + /* Find the smallest nonzero frequency, set c1 = its symbol */ + /* In case of ties, take the larger symbol number */ + c1 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v) { + v = freq[i]; + c1 = i; + } + } + + /* Find the next smallest nonzero frequency, set c2 = its symbol */ + /* In case of ties, take the larger symbol number */ + c2 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v && i != c1) { + v = freq[i]; + c2 = i; + } + } + + /* Done if we've merged everything into one frequency */ + if (c2 < 0) + break; + + /* Else merge the two counts/trees */ + freq[c1] += freq[c2]; + freq[c2] = 0; + + /* Increment the codesize of everything in c1's tree branch */ + codesize[c1]++; + while (others[c1] >= 0) { + c1 = others[c1]; + codesize[c1]++; + } + + others[c1] = c2; /* chain c2 onto c1's tree branch */ + + /* Increment the codesize of everything in c2's tree branch */ + codesize[c2]++; + while (others[c2] >= 0) { + c2 = others[c2]; + codesize[c2]++; + } + } + + /* Now count the number of symbols of each code length */ + for (i = 0; i <= 256; i++) { + if (codesize[i]) { + /* The JPEG standard seems to think that this can't happen, */ + /* but I'm paranoid... */ + if (codesize[i] > MAX_CLEN) + ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); + + bits[codesize[i]]++; + } + } + + /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure + * Huffman procedure assigned any such lengths, we must adjust the coding. + * Here is what the JPEG spec says about how this next bit works: + * Since symbols are paired for the longest Huffman code, the symbols are + * removed from this length category two at a time. The prefix for the pair + * (which is one bit shorter) is allocated to one of the pair; then, + * skipping the BITS entry for that prefix length, a code word from the next + * shortest nonzero BITS entry is converted into a prefix for two code words + * one bit longer. + */ + + for (i = MAX_CLEN; i > 16; i--) { + while (bits[i] > 0) { + j = i - 2; /* find length of new prefix to be used */ + while (bits[j] == 0) + j--; + + bits[i] -= 2; /* remove two symbols */ + bits[i-1]++; /* one goes in this length */ + bits[j+1] += 2; /* two new symbols in this length */ + bits[j]--; /* symbol of this length is now a prefix */ + } + } + + /* Remove the count for the pseudo-symbol 256 from the largest codelength */ + while (bits[i] == 0) /* find largest codelength still in use */ + i--; + bits[i]--; + + /* Return final symbol counts (only for lengths 0..16) */ + MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); + + /* Return a list of the symbols sorted by code length */ + /* It's not real clear to me why we don't need to consider the codelength + * changes made above, but the JPEG spec seems to think this works. + */ + p = 0; + for (i = 1; i <= MAX_CLEN; i++) { + for (j = 0; j <= 255; j++) { + if (codesize[j] == i) { + htbl->huffval[p] = (UINT8) j; + p++; + } + } + } + + /* Set sent_table FALSE so updated table will be written to JPEG file. */ + htbl->sent_table = FALSE; +} + + +/* + * Finish up a statistics-gathering pass and create the new Huffman tables. + */ + +METHODDEF(void) +finish_pass_gather (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, dctbl, actbl; + jpeg_component_info * compptr; + JHUFF_TBL **htblptr; + boolean did_dc[NUM_HUFF_TBLS]; + boolean did_ac[NUM_HUFF_TBLS]; + + /* It's important not to apply jpeg_gen_optimal_table more than once + * per table, because it clobbers the input frequency counts! + */ + MEMZERO(did_dc, SIZEOF(did_dc)); + MEMZERO(did_ac, SIZEOF(did_ac)); + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + dctbl = compptr->dc_tbl_no; + actbl = compptr->ac_tbl_no; + if (! did_dc[dctbl]) { + htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]); + did_dc[dctbl] = TRUE; + } + if (! did_ac[actbl]) { + htblptr = & cinfo->ac_huff_tbl_ptrs[actbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]); + did_ac[actbl] = TRUE; + } + } +} + + +#endif /* ENTROPY_OPT_SUPPORTED */ + + +/* + * Module initialization routine for Huffman entropy encoding. + */ + +GLOBAL(void) +jinit_huff_encoder (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_encoder)); + cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; + entropy->pub.start_pass = start_pass_huff; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; +#ifdef ENTROPY_OPT_SUPPORTED + entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; +#endif + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcinit.c b/third_party/libjpeg/fpdfapi_jcinit.c new file mode 100644 index 0000000000..58e5d18764 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcinit.c @@ -0,0 +1,75 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcinit.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains initialization logic for the JPEG compressor. + * This routine is in charge of selecting the modules to be executed and + * making an initialization call to each one. + * + * Logically, this code belongs in jcmaster.c. It's split out because + * linking this routine implies linking the entire compression library. + * For a transcoding-only application, we want to be able to use jcmaster.c + * without linking in the whole library. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Master selection of compression modules. + * This is done once at the start of processing an image. We determine + * which modules will be used and give them appropriate initialization calls. + */ + +GLOBAL(void) +jinit_compress_master (j_compress_ptr cinfo) +{ + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, FALSE /* full compression */); + + /* Preprocessing */ + if (! cinfo->raw_data_in) { + jinit_color_converter(cinfo); + jinit_downsampler(cinfo); + jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); + } + /* Forward DCT */ + jinit_forward_dct(cinfo); + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) { + ERREXIT(cinfo, JERR_ARITH_NOTIMPL); + } else { + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + jinit_phuff_encoder(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else + jinit_huff_encoder(cinfo); + } + + /* Need a full-image coefficient buffer in any multi-pass mode. */ + jinit_c_coef_controller(cinfo, + (boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding)); + jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcmainct.c b/third_party/libjpeg/fpdfapi_jcmainct.c new file mode 100644 index 0000000000..4bf2c403ea --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcmainct.c @@ -0,0 +1,296 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcmainct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for compression. + * The main buffer lies between the pre-processor and the JPEG + * compressor proper; it holds downsampled data in the JPEG colorspace. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Note: currently, there is no operating mode in which a full-image buffer + * is needed at this step. If there were, that mode could not be used with + * "raw data" input, since this module is bypassed in that case. However, + * we've left the code here for possible use in special applications. + */ +#undef FULL_MAIN_BUFFER_SUPPORTED + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_main_controller pub; /* public fields */ + + JDIMENSION cur_iMCU_row; /* number of current iMCU row */ + JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */ + boolean suspended; /* remember if we suspended output */ + J_BUF_MODE pass_mode; /* current operating mode */ + + /* If using just a strip buffer, this points to the entire set of buffers + * (we allocate one for each component). In the full-image case, this + * points to the currently accessible strips of the virtual arrays. + */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + +#ifdef FULL_MAIN_BUFFER_SUPPORTED + /* If using full-image storage, this array holds pointers to virtual-array + * control blocks for each component. Unused if not full-image storage. + */ + jvirt_sarray_ptr whole_image[MAX_COMPONENTS]; +#endif +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + + +/* Forward declarations */ +METHODDEF(void) process_data_simple_main + JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); +#ifdef FULL_MAIN_BUFFER_SUPPORTED +METHODDEF(void) process_data_buffer_main + JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + /* Do nothing in raw-data mode. */ + if (cinfo->raw_data_in) + return; + + main->cur_iMCU_row = 0; /* initialize counters */ + main->rowgroup_ctr = 0; + main->suspended = FALSE; + main->pass_mode = pass_mode; /* save mode for use by process_data */ + + switch (pass_mode) { + case JBUF_PASS_THRU: +#ifdef FULL_MAIN_BUFFER_SUPPORTED + if (main->whole_image[0] != NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + main->pub.process_data = process_data_simple_main; + break; +#ifdef FULL_MAIN_BUFFER_SUPPORTED + case JBUF_SAVE_SOURCE: + case JBUF_CRANK_DEST: + case JBUF_SAVE_AND_PASS: + if (main->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + main->pub.process_data = process_data_buffer_main; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This routine handles the simple pass-through mode, + * where we have only a strip buffer. + */ + +METHODDEF(void) +process_data_simple_main (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + while (main->cur_iMCU_row < cinfo->total_iMCU_rows) { + /* Read input data if we haven't filled the main buffer yet */ + if (main->rowgroup_ctr < DCTSIZE) + (*cinfo->prep->pre_process_data) (cinfo, + input_buf, in_row_ctr, in_rows_avail, + main->buffer, &main->rowgroup_ctr, + (JDIMENSION) DCTSIZE); + + /* If we don't have a full iMCU row buffered, return to application for + * more data. Note that preprocessor will always pad to fill the iMCU row + * at the bottom of the image. + */ + if (main->rowgroup_ctr != DCTSIZE) + return; + + /* Send the completed row to the compressor */ + if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) { + /* If compressor did not consume the whole row, then we must need to + * suspend processing and return to the application. In this situation + * we pretend we didn't yet consume the last input row; otherwise, if + * it happened to be the last row of the image, the application would + * think we were done. + */ + if (! main->suspended) { + (*in_row_ctr)--; + main->suspended = TRUE; + } + return; + } + /* We did finish the row. Undo our little suspension hack if a previous + * call suspended; then mark the main buffer empty. + */ + if (main->suspended) { + (*in_row_ctr)++; + main->suspended = FALSE; + } + main->rowgroup_ctr = 0; + main->cur_iMCU_row++; + } +} + + +#ifdef FULL_MAIN_BUFFER_SUPPORTED + +/* + * Process some data. + * This routine handles all of the modes that use a full-size buffer. + */ + +METHODDEF(void) +process_data_buffer_main (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci; + jpeg_component_info *compptr; + boolean writing = (main->pass_mode != JBUF_CRANK_DEST); + + while (main->cur_iMCU_row < cinfo->total_iMCU_rows) { + /* Realign the virtual buffers if at the start of an iMCU row. */ + if (main->rowgroup_ctr == 0) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + main->buffer[ci] = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, main->whole_image[ci], + main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE), + (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing); + } + /* In a read pass, pretend we just read some source data. */ + if (! writing) { + *in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE; + main->rowgroup_ctr = DCTSIZE; + } + } + + /* If a write pass, read input data until the current iMCU row is full. */ + /* Note: preprocessor will pad if necessary to fill the last iMCU row. */ + if (writing) { + (*cinfo->prep->pre_process_data) (cinfo, + input_buf, in_row_ctr, in_rows_avail, + main->buffer, &main->rowgroup_ctr, + (JDIMENSION) DCTSIZE); + /* Return to application if we need more data to fill the iMCU row. */ + if (main->rowgroup_ctr < DCTSIZE) + return; + } + + /* Emit data, unless this is a sink-only pass. */ + if (main->pass_mode != JBUF_SAVE_SOURCE) { + if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) { + /* If compressor did not consume the whole row, then we must need to + * suspend processing and return to the application. In this situation + * we pretend we didn't yet consume the last input row; otherwise, if + * it happened to be the last row of the image, the application would + * think we were done. + */ + if (! main->suspended) { + (*in_row_ctr)--; + main->suspended = TRUE; + } + return; + } + /* We did finish the row. Undo our little suspension hack if a previous + * call suspended; then mark the main buffer empty. + */ + if (main->suspended) { + (*in_row_ctr)++; + main->suspended = FALSE; + } + } + + /* If get here, we are done with this iMCU row. Mark buffer empty. */ + main->rowgroup_ctr = 0; + main->cur_iMCU_row++; + } +} + +#endif /* FULL_MAIN_BUFFER_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL(void) +jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr main; + int ci; + jpeg_component_info *compptr; + + main = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = (struct jpeg_c_main_controller *) main; + main->pub.start_pass = start_pass_main; + + /* We don't need to create a buffer in raw-data mode. */ + if (cinfo->raw_data_in) + return; + + /* Create the buffer. It holds downsampled data, so each component + * may be of a different size. + */ + if (need_full_buffer) { +#ifdef FULL_MAIN_BUFFER_SUPPORTED + /* Allocate a full-image virtual array for each component */ + /* Note we pad the bottom to a multiple of the iMCU height */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + main->whole_image[ci] = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + compptr->width_in_blocks * DCTSIZE, + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor) * DCTSIZE, + (JDIMENSION) (compptr->v_samp_factor * DCTSIZE)); + } +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + } else { +#ifdef FULL_MAIN_BUFFER_SUPPORTED + main->whole_image[0] = NULL; /* flag for no virtual arrays */ +#endif + /* Allocate a strip buffer for each component */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + main->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * DCTSIZE, + (JDIMENSION) (compptr->v_samp_factor * DCTSIZE)); + } + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcmarker.c b/third_party/libjpeg/fpdfapi_jcmarker.c new file mode 100644 index 0000000000..f1c89d92a9 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcmarker.c @@ -0,0 +1,667 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcmarker.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write JPEG datastream markers. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* Private state */ + +typedef struct { + struct jpeg_marker_writer pub; /* public fields */ + + unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */ +} my_marker_writer; + +typedef my_marker_writer * my_marker_ptr; + + +/* + * Basic output routines. + * + * Note that we do not support suspension while writing a marker. + * Therefore, an application using suspension must ensure that there is + * enough buffer space for the initial markers (typ. 600-700 bytes) before + * calling jpeg_start_compress, and enough space to write the trailing EOI + * (a few bytes) before calling jpeg_finish_compress. Multipass compression + * modes are not supported at all with suspension, so those two are the only + * points where markers will be written. + */ + +LOCAL(void) +emit_byte (j_compress_ptr cinfo, int val) +/* Emit a byte */ +{ + struct jpeg_destination_mgr * dest = cinfo->dest; + + *(dest->next_output_byte)++ = (JOCTET) val; + if (--dest->free_in_buffer == 0) { + if (! (*dest->empty_output_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } +} + + +LOCAL(void) +emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark) +/* Emit a marker code */ +{ + emit_byte(cinfo, 0xFF); + emit_byte(cinfo, (int) mark); +} + + +LOCAL(void) +emit_2bytes (j_compress_ptr cinfo, int value) +/* Emit a 2-byte integer; these are always MSB first in JPEG files */ +{ + emit_byte(cinfo, (value >> 8) & 0xFF); + emit_byte(cinfo, value & 0xFF); +} + + +/* + * Routines to write specific marker types. + */ + +LOCAL(int) +emit_dqt (j_compress_ptr cinfo, int index) +/* Emit a DQT marker */ +/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */ +{ + JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index]; + int prec; + int i; + + if (qtbl == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index); + + prec = 0; + for (i = 0; i < DCTSIZE2; i++) { + if (qtbl->quantval[i] > 255) + prec = 1; + } + + if (! qtbl->sent_table) { + emit_marker(cinfo, M_DQT); + + emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2); + + emit_byte(cinfo, index + (prec<<4)); + + for (i = 0; i < DCTSIZE2; i++) { + /* The table entries must be emitted in zigzag order. */ + unsigned int qval = qtbl->quantval[jpeg_natural_order[i]]; + if (prec) + emit_byte(cinfo, (int) (qval >> 8)); + emit_byte(cinfo, (int) (qval & 0xFF)); + } + + qtbl->sent_table = TRUE; + } + + return prec; +} + + +LOCAL(void) +emit_dht (j_compress_ptr cinfo, int index, boolean is_ac) +/* Emit a DHT marker */ +{ + JHUFF_TBL * htbl; + int length, i; + + if (is_ac) { + htbl = cinfo->ac_huff_tbl_ptrs[index]; + index += 0x10; /* output index has AC bit set */ + } else { + htbl = cinfo->dc_huff_tbl_ptrs[index]; + } + + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index); + + if (! htbl->sent_table) { + emit_marker(cinfo, M_DHT); + + length = 0; + for (i = 1; i <= 16; i++) + length += htbl->bits[i]; + + emit_2bytes(cinfo, length + 2 + 1 + 16); + emit_byte(cinfo, index); + + for (i = 1; i <= 16; i++) + emit_byte(cinfo, htbl->bits[i]); + + for (i = 0; i < length; i++) + emit_byte(cinfo, htbl->huffval[i]); + + htbl->sent_table = TRUE; + } +} + + +LOCAL(void) +emit_dac (j_compress_ptr cinfo) +/* Emit a DAC marker */ +/* Since the useful info is so small, we want to emit all the tables in */ +/* one DAC marker. Therefore this routine does its own scan of the table. */ +{ +#ifdef C_ARITH_CODING_SUPPORTED + char dc_in_use[NUM_ARITH_TBLS]; + char ac_in_use[NUM_ARITH_TBLS]; + int length, i; + jpeg_component_info *compptr; + + for (i = 0; i < NUM_ARITH_TBLS; i++) + dc_in_use[i] = ac_in_use[i] = 0; + + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + dc_in_use[compptr->dc_tbl_no] = 1; + ac_in_use[compptr->ac_tbl_no] = 1; + } + + length = 0; + for (i = 0; i < NUM_ARITH_TBLS; i++) + length += dc_in_use[i] + ac_in_use[i]; + + emit_marker(cinfo, M_DAC); + + emit_2bytes(cinfo, length*2 + 2); + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + if (dc_in_use[i]) { + emit_byte(cinfo, i); + emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); + } + if (ac_in_use[i]) { + emit_byte(cinfo, i + 0x10); + emit_byte(cinfo, cinfo->arith_ac_K[i]); + } + } +#endif /* C_ARITH_CODING_SUPPORTED */ +} + + +LOCAL(void) +emit_dri (j_compress_ptr cinfo) +/* Emit a DRI marker */ +{ + emit_marker(cinfo, M_DRI); + + emit_2bytes(cinfo, 4); /* fixed length */ + + emit_2bytes(cinfo, (int) cinfo->restart_interval); +} + + +LOCAL(void) +emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) +/* Emit a SOF marker */ +{ + int ci; + jpeg_component_info *compptr; + + emit_marker(cinfo, code); + + emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ + + /* Make sure image isn't bigger than SOF field can handle */ + if ((long) cinfo->image_height > 65535L || + (long) cinfo->image_width > 65535L) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535); + + emit_byte(cinfo, cinfo->data_precision); + emit_2bytes(cinfo, (int) cinfo->image_height); + emit_2bytes(cinfo, (int) cinfo->image_width); + + emit_byte(cinfo, cinfo->num_components); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + emit_byte(cinfo, compptr->component_id); + emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor); + emit_byte(cinfo, compptr->quant_tbl_no); + } +} + + +LOCAL(void) +emit_sos (j_compress_ptr cinfo) +/* Emit a SOS marker */ +{ + int i, td, ta; + jpeg_component_info *compptr; + + emit_marker(cinfo, M_SOS); + + emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */ + + emit_byte(cinfo, cinfo->comps_in_scan); + + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + emit_byte(cinfo, compptr->component_id); + td = compptr->dc_tbl_no; + ta = compptr->ac_tbl_no; + if (cinfo->progressive_mode) { + /* Progressive mode: only DC or only AC tables are used in one scan; + * furthermore, Huffman coding of DC refinement uses no table at all. + * We emit 0 for unused field(s); this is recommended by the P&M text + * but does not seem to be specified in the standard. + */ + if (cinfo->Ss == 0) { + ta = 0; /* DC scan */ + if (cinfo->Ah != 0 && !cinfo->arith_code) + td = 0; /* no DC table either */ + } else { + td = 0; /* AC scan */ + } + } + emit_byte(cinfo, (td << 4) + ta); + } + + emit_byte(cinfo, cinfo->Ss); + emit_byte(cinfo, cinfo->Se); + emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al); +} + + +LOCAL(void) +emit_jfif_app0 (j_compress_ptr cinfo) +/* Emit a JFIF-compliant APP0 marker */ +{ + /* + * Length of APP0 block (2 bytes) + * Block ID (4 bytes - ASCII "JFIF") + * Zero byte (1 byte to terminate the ID string) + * Version Major, Minor (2 bytes - major first) + * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm) + * Xdpu (2 bytes - dots per unit horizontal) + * Ydpu (2 bytes - dots per unit vertical) + * Thumbnail X size (1 byte) + * Thumbnail Y size (1 byte) + */ + + emit_marker(cinfo, M_APP0); + + emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */ + + emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */ + emit_byte(cinfo, 0x46); + emit_byte(cinfo, 0x49); + emit_byte(cinfo, 0x46); + emit_byte(cinfo, 0); + emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */ + emit_byte(cinfo, cinfo->JFIF_minor_version); + emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */ + emit_2bytes(cinfo, (int) cinfo->X_density); + emit_2bytes(cinfo, (int) cinfo->Y_density); + emit_byte(cinfo, 0); /* No thumbnail image */ + emit_byte(cinfo, 0); +} + + +LOCAL(void) +emit_adobe_app14 (j_compress_ptr cinfo) +/* Emit an Adobe APP14 marker */ +{ + /* + * Length of APP14 block (2 bytes) + * Block ID (5 bytes - ASCII "Adobe") + * Version Number (2 bytes - currently 100) + * Flags0 (2 bytes - currently 0) + * Flags1 (2 bytes - currently 0) + * Color transform (1 byte) + * + * Although Adobe TN 5116 mentions Version = 101, all the Adobe files + * now in circulation seem to use Version = 100, so that's what we write. + * + * We write the color transform byte as 1 if the JPEG color space is + * YCbCr, 2 if it's YCCK, 0 otherwise. Adobe's definition has to do with + * whether the encoder performed a transformation, which is pretty useless. + */ + + emit_marker(cinfo, M_APP14); + + emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */ + + emit_byte(cinfo, 0x41); /* Identifier: ASCII "Adobe" */ + emit_byte(cinfo, 0x64); + emit_byte(cinfo, 0x6F); + emit_byte(cinfo, 0x62); + emit_byte(cinfo, 0x65); + emit_2bytes(cinfo, 100); /* Version */ + emit_2bytes(cinfo, 0); /* Flags0 */ + emit_2bytes(cinfo, 0); /* Flags1 */ + switch (cinfo->jpeg_color_space) { + case JCS_YCbCr: + emit_byte(cinfo, 1); /* Color transform = 1 */ + break; + case JCS_YCCK: + emit_byte(cinfo, 2); /* Color transform = 2 */ + break; + default: + emit_byte(cinfo, 0); /* Color transform = 0 */ + break; + } +} + + +/* + * These routines allow writing an arbitrary marker with parameters. + * The only intended use is to emit COM or APPn markers after calling + * write_file_header and before calling write_frame_header. + * Other uses are not guaranteed to produce desirable results. + * Counting the parameter bytes properly is the caller's responsibility. + */ + +METHODDEF(void) +write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen) +/* Emit an arbitrary marker header */ +{ + if (datalen > (unsigned int) 65533) /* safety check */ + ERREXIT(cinfo, JERR_BAD_LENGTH); + + emit_marker(cinfo, (JPEG_MARKER) marker); + + emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */ +} + +METHODDEF(void) +write_marker_byte (j_compress_ptr cinfo, int val) +/* Emit one byte of marker parameters following write_marker_header */ +{ + emit_byte(cinfo, val); +} + + +/* + * Write datastream header. + * This consists of an SOI and optional APPn markers. + * We recommend use of the JFIF marker, but not the Adobe marker, + * when using YCbCr or grayscale data. The JFIF marker should NOT + * be used for any other JPEG colorspace. The Adobe marker is helpful + * to distinguish RGB, CMYK, and YCCK colorspaces. + * Note that an application can write additional header markers after + * jpeg_start_compress returns. + */ + +METHODDEF(void) +write_file_header (j_compress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + emit_marker(cinfo, M_SOI); /* first the SOI */ + + /* SOI is defined to reset restart interval to 0 */ + marker->last_restart_interval = 0; + + if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */ + emit_jfif_app0(cinfo); + if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */ + emit_adobe_app14(cinfo); +} + + +/* + * Write frame header. + * This consists of DQT and SOFn markers. + * Note that we do not emit the SOF until we have emitted the DQT(s). + * This avoids compatibility problems with incorrect implementations that + * try to error-check the quant table numbers as soon as they see the SOF. + */ + +METHODDEF(void) +write_frame_header (j_compress_ptr cinfo) +{ + int ci, prec; + boolean is_baseline; + jpeg_component_info *compptr; + + /* Emit DQT for each quantization table. + * Note that emit_dqt() suppresses any duplicate tables. + */ + prec = 0; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + prec += emit_dqt(cinfo, compptr->quant_tbl_no); + } + /* now prec is nonzero iff there are any 16-bit quant tables. */ + + /* Check for a non-baseline specification. + * Note we assume that Huffman table numbers won't be changed later. + */ + if (cinfo->arith_code || cinfo->progressive_mode || + cinfo->data_precision != 8) { + is_baseline = FALSE; + } else { + is_baseline = TRUE; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1) + is_baseline = FALSE; + } + if (prec && is_baseline) { + is_baseline = FALSE; + /* If it's baseline except for quantizer size, warn the user */ + TRACEMS(cinfo, 0, JTRC_16BIT_TABLES); + } + } + + /* Emit the proper SOF marker */ + if (cinfo->arith_code) { + emit_sof(cinfo, M_SOF9); /* SOF code for arithmetic coding */ + } else { + if (cinfo->progressive_mode) + emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */ + else if (is_baseline) + emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */ + else + emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ + } +} + + +/* + * Write scan header. + * This consists of DHT or DAC markers, optional DRI, and SOS. + * Compressed data will be written following the SOS. + */ + +METHODDEF(void) +write_scan_header (j_compress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + int i; + jpeg_component_info *compptr; + + if (cinfo->arith_code) { + /* Emit arith conditioning info. We may have some duplication + * if the file has multiple scans, but it's so small it's hardly + * worth worrying about. + */ + emit_dac(cinfo); + } else { + /* Emit Huffman tables. + * Note that emit_dht() suppresses any duplicate tables. + */ + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + if (cinfo->progressive_mode) { + /* Progressive mode: only DC or only AC tables are used in one scan */ + if (cinfo->Ss == 0) { + if (cinfo->Ah == 0) /* DC needs no table for refinement scan */ + emit_dht(cinfo, compptr->dc_tbl_no, FALSE); + } else { + emit_dht(cinfo, compptr->ac_tbl_no, TRUE); + } + } else { + /* Sequential mode: need both DC and AC tables */ + emit_dht(cinfo, compptr->dc_tbl_no, FALSE); + emit_dht(cinfo, compptr->ac_tbl_no, TRUE); + } + } + } + + /* Emit DRI if required --- note that DRI value could change for each scan. + * We avoid wasting space with unnecessary DRIs, however. + */ + if (cinfo->restart_interval != marker->last_restart_interval) { + emit_dri(cinfo); + marker->last_restart_interval = cinfo->restart_interval; + } + + emit_sos(cinfo); +} + + +/* + * Write datastream trailer. + */ + +METHODDEF(void) +write_file_trailer (j_compress_ptr cinfo) +{ + emit_marker(cinfo, M_EOI); +} + + +/* + * Write an abbreviated table-specification datastream. + * This consists of SOI, DQT and DHT tables, and EOI. + * Any table that is defined and not marked sent_table = TRUE will be + * emitted. Note that all tables will be marked sent_table = TRUE at exit. + */ + +METHODDEF(void) +write_tables_only (j_compress_ptr cinfo) +{ + int i; + + emit_marker(cinfo, M_SOI); + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + if (cinfo->quant_tbl_ptrs[i] != NULL) + (void) emit_dqt(cinfo, i); + } + + if (! cinfo->arith_code) { + for (i = 0; i < NUM_HUFF_TBLS; i++) { + if (cinfo->dc_huff_tbl_ptrs[i] != NULL) + emit_dht(cinfo, i, FALSE); + if (cinfo->ac_huff_tbl_ptrs[i] != NULL) + emit_dht(cinfo, i, TRUE); + } + } + + emit_marker(cinfo, M_EOI); +} + + +/* + * Initialize the marker writer module. + */ + +GLOBAL(void) +jinit_marker_writer (j_compress_ptr cinfo) +{ + my_marker_ptr marker; + + /* Create the subobject */ + marker = (my_marker_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_marker_writer)); + cinfo->marker = (struct jpeg_marker_writer *) marker; + /* Initialize method pointers */ + marker->pub.write_file_header = write_file_header; + marker->pub.write_frame_header = write_frame_header; + marker->pub.write_scan_header = write_scan_header; + marker->pub.write_file_trailer = write_file_trailer; + marker->pub.write_tables_only = write_tables_only; + marker->pub.write_marker_header = write_marker_header; + marker->pub.write_marker_byte = write_marker_byte; + /* Initialize private state */ + marker->last_restart_interval = 0; +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcmaster.c b/third_party/libjpeg/fpdfapi_jcmaster.c new file mode 100644 index 0000000000..45322a53b3 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcmaster.c @@ -0,0 +1,593 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG compressor. + * These routines are concerned with parameter validation, initial setup, + * and inter-pass control (determining the number of passes and the work + * to be done in each pass). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef enum { + main_pass, /* input data, also do first output step */ + huff_opt_pass, /* Huffman code optimization pass */ + output_pass /* data output pass */ +} c_pass_type; + +typedef struct { + struct jpeg_comp_master pub; /* public fields */ + + c_pass_type pass_type; /* the type of the current pass */ + + int pass_number; /* # of passes completed */ + int total_passes; /* total # of passes needed */ + + int scan_number; /* current index in scan_info[] */ +} my_comp_master; + +typedef my_comp_master * my_master_ptr; + + +/* + * Support routines that do various essential calculations. + */ + +LOCAL(void) +initial_setup (j_compress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ + int ci; + jpeg_component_info *compptr; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* Sanity check on image dimensions */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 + || cinfo->num_components <= 0 || cinfo->input_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Width of an input scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Fill in the correct component_index value; don't rely on application */ + compptr->component_index = ci; + /* For compression, we never do DCT scaling. */ + compptr->DCT_scaled_size = DCTSIZE; + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * DCTSIZE)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * DCTSIZE)); + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) cinfo->max_h_samp_factor); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) cinfo->max_v_samp_factor); + /* Mark component needed (this flag isn't actually used for compression) */ + compptr->component_needed = TRUE; + } + + /* Compute number of fully interleaved MCU rows (number of times that + * main controller will call coefficient controller). + */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor*DCTSIZE)); +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(void) +validate_script (j_compress_ptr cinfo) +/* Verify that the scan script in cinfo->scan_info[] is valid; also + * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. + */ +{ + const jpeg_scan_info * scanptr; + int scanno, ncomps, ci, coefi, thisi; + int Ss, Se, Ah, Al; + boolean component_sent[MAX_COMPONENTS]; +#ifdef C_PROGRESSIVE_SUPPORTED + int * last_bitpos_ptr; + int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; + /* -1 until that coefficient has been seen; then last Al for it */ +#endif + + if (cinfo->num_scans <= 0) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); + + /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; + * for progressive JPEG, no scan can have this. + */ + scanptr = cinfo->scan_info; + if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { +#ifdef C_PROGRESSIVE_SUPPORTED + cinfo->progressive_mode = TRUE; + last_bitpos_ptr = & last_bitpos[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (coefi = 0; coefi < DCTSIZE2; coefi++) + *last_bitpos_ptr++ = -1; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + for (ci = 0; ci < cinfo->num_components; ci++) + component_sent[ci] = FALSE; + } + + for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { + /* Validate component indexes */ + ncomps = scanptr->comps_in_scan; + if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (thisi < 0 || thisi >= cinfo->num_components) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + /* Components must appear in SOF order within each scan */ + if (ci > 0 && thisi <= scanptr->component_index[ci-1]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + } + /* Validate progression parameters */ + Ss = scanptr->Ss; + Se = scanptr->Se; + Ah = scanptr->Ah; + Al = scanptr->Al; + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that + * seems wrong: the upper bound ought to depend on data precision. + * Perhaps they really meant 0..N+1 for N-bit precision. + * Here we allow 0..10 for 8-bit data; Al larger than 10 results in + * out-of-range reconstructed DC values during the first DC scan, + * which might cause problems for some decoders. + */ +#if BITS_IN_JSAMPLE == 8 +#define MAX_AH_AL 10 +#else +#define MAX_AH_AL 13 +#endif + if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || + Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + if (Ss == 0) { + if (Se != 0) /* DC and AC together not OK */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + if (ncomps != 1) /* AC scans must be for only one component */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + for (ci = 0; ci < ncomps; ci++) { + last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; + if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + for (coefi = Ss; coefi <= Se; coefi++) { + if (last_bitpos_ptr[coefi] < 0) { + /* first scan of this coefficient */ + if (Ah != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + /* not first scan */ + if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + last_bitpos_ptr[coefi] = Al; + } + } +#endif + } else { + /* For sequential JPEG, all progression parameters must be these: */ + if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + /* Make sure components are not sent twice */ + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (component_sent[thisi]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + component_sent[thisi] = TRUE; + } + } + } + + /* Now verify that everything got sent. */ + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* For progressive mode, we only check that at least some DC data + * got sent for each component; the spec does not require that all bits + * of all coefficients be transmitted. Would it be wiser to enforce + * transmission of all coefficient bits?? + */ + for (ci = 0; ci < cinfo->num_components; ci++) { + if (last_bitpos[ci][0] < 0) + ERREXIT(cinfo, JERR_MISSING_DATA); + } +#endif + } else { + for (ci = 0; ci < cinfo->num_components; ci++) { + if (! component_sent[ci]) + ERREXIT(cinfo, JERR_MISSING_DATA); + } + } +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +LOCAL(void) +select_scan_parameters (j_compress_ptr cinfo) +/* Set up the scan parameters for the current scan */ +{ + int ci; + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (cinfo->scan_info != NULL) { + /* Prepare for current scan --- the script is already validated */ + my_master_ptr master = (my_master_ptr) cinfo->master; + const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; + + cinfo->comps_in_scan = scanptr->comps_in_scan; + for (ci = 0; ci < scanptr->comps_in_scan; ci++) { + cinfo->cur_comp_info[ci] = + &cinfo->comp_info[scanptr->component_index[ci]]; + } + cinfo->Ss = scanptr->Ss; + cinfo->Se = scanptr->Se; + cinfo->Ah = scanptr->Ah; + cinfo->Al = scanptr->Al; + } + else +#endif + { + /* Prepare for single sequential-JPEG scan containing all components */ + if (cinfo->num_components > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPS_IN_SCAN); + cinfo->comps_in_scan = cinfo->num_components; + for (ci = 0; ci < cinfo->num_components; ci++) { + cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; + } + cinfo->Ss = 0; + cinfo->Se = DCTSIZE2-1; + cinfo->Ah = 0; + cinfo->Al = 0; + } +} + + +LOCAL(void) +per_scan_setup (j_compress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = DCTSIZE; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, + (long) (cinfo->max_h_samp_factor*DCTSIZE)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor*DCTSIZE)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } + + /* Convert restart specified in rows to actual MCU count. */ + /* Note that count must fit in 16 bits, so we provide limiting. */ + if (cinfo->restart_in_rows > 0) { + long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; + cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); + } +} + + +/* + * Per-pass setup. + * This is called at the beginning of each pass. We determine which modules + * will be active during this pass and give them appropriate start_pass calls. + * We also set is_last_pass to indicate whether any more passes will be + * required. + */ + +METHODDEF(void) +prepare_for_pass (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + switch (master->pass_type) { + case main_pass: + /* Initial pass: will collect input data, and do either Huffman + * optimization or data output for the first scan. + */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (! cinfo->raw_data_in) { + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->downsample->start_pass) (cinfo); + (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); + } + (*cinfo->fdct->start_pass) (cinfo); + (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); + (*cinfo->coef->start_pass) (cinfo, + (master->total_passes > 1 ? + JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + if (cinfo->optimize_coding) { + /* No immediate data output; postpone writing frame/scan headers */ + master->pub.call_pass_startup = FALSE; + } else { + /* Will write frame/scan headers at first jpeg_write_scanlines call */ + master->pub.call_pass_startup = TRUE; + } + break; +#ifdef ENTROPY_OPT_SUPPORTED + case huff_opt_pass: + /* Do Huffman optimization for a scan after the first one. */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) { + (*cinfo->entropy->start_pass) (cinfo, TRUE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + master->pub.call_pass_startup = FALSE; + break; + } + /* Special case: Huffman DC refinement scans need no Huffman table + * and therefore we can skip the optimization pass for them. + */ + master->pass_type = output_pass; + master->pass_number++; + /*FALLTHROUGH*/ +#endif + case output_pass: + /* Do a data-output pass. */ + /* We need not repeat per-scan setup if prior optimization pass did it. */ + if (! cinfo->optimize_coding) { + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + } + (*cinfo->entropy->start_pass) (cinfo, FALSE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + /* We emit frame/scan headers now */ + if (master->scan_number == 0) + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); + master->pub.call_pass_startup = FALSE; + break; + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + } + + master->pub.is_last_pass = (master->pass_number == master->total_passes-1); + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->total_passes; + } +} + + +/* + * Special start-of-pass hook. + * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. + * In single-pass processing, we need this hook because we don't want to + * write frame/scan headers during jpeg_start_compress; we want to let the + * application write COM markers etc. between jpeg_start_compress and the + * jpeg_write_scanlines loop. + * In multi-pass processing, this routine is not used. + */ + +METHODDEF(void) +pass_startup (j_compress_ptr cinfo) +{ + cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ + + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); +} + + +/* + * Finish up at end of pass. + */ + +METHODDEF(void) +finish_pass_master (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* The entropy coder always needs an end-of-pass call, + * either to analyze statistics or to flush its output buffer. + */ + (*cinfo->entropy->finish_pass) (cinfo); + + /* Update state for next pass */ + switch (master->pass_type) { + case main_pass: + /* next pass is either output of scan 0 (after optimization) + * or output of scan 1 (if no optimization). + */ + master->pass_type = output_pass; + if (! cinfo->optimize_coding) + master->scan_number++; + break; + case huff_opt_pass: + /* next pass is always output of current scan */ + master->pass_type = output_pass; + break; + case output_pass: + /* next pass is either optimization or output of next scan */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + master->scan_number++; + break; + } + + master->pass_number++; +} + + +/* + * Initialize master compression control. + */ + +GLOBAL(void) +jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_comp_master)); + cinfo->master = (struct jpeg_comp_master *) master; + master->pub.prepare_for_pass = prepare_for_pass; + master->pub.pass_startup = pass_startup; + master->pub.finish_pass = finish_pass_master; + master->pub.is_last_pass = FALSE; + + /* Validate parameters, determine derived values */ + initial_setup(cinfo); + + if (cinfo->scan_info != NULL) { +#ifdef C_MULTISCAN_FILES_SUPPORTED + validate_script(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + cinfo->num_scans = 1; + } + + if (cinfo->progressive_mode) /* TEMPORARY HACK ??? */ + cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */ + + /* Initialize my private state */ + if (transcode_only) { + /* no main pass in transcoding */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + else + master->pass_type = output_pass; + } else { + /* for normal compression, first pass is always this type: */ + master->pass_type = main_pass; + } + master->scan_number = 0; + master->pass_number = 0; + if (cinfo->optimize_coding) + master->total_passes = cinfo->num_scans * 2; + else + master->total_passes = cinfo->num_scans; +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcomapi.c b/third_party/libjpeg/fpdfapi_jcomapi.c new file mode 100644 index 0000000000..aad37d8879 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcomapi.c @@ -0,0 +1,109 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcomapi.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface routines that are used for both + * compression and decompression. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Abort processing of a JPEG compression or decompression operation, + * but don't destroy the object itself. + * + * For this, we merely clean up all the nonpermanent memory pools. + * Note that temp files (virtual arrays) are not allowed to belong to + * the permanent pool, so we will be able to close all temp files here. + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_abort (j_common_ptr cinfo) +{ + int pool; + + /* Do nothing if called on a not-initialized or destroyed JPEG object. */ + if (cinfo->mem == NULL) + return; + + /* Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { + (*cinfo->mem->free_pool) (cinfo, pool); + } + + /* Reset overall state for possible reuse of object */ + if (cinfo->is_decompressor) { + cinfo->global_state = DSTATE_START; + /* Try to keep application from accessing now-deleted marker list. + * A bit kludgy to do it here, but this is the most central place. + */ + ((j_decompress_ptr) cinfo)->marker_list = NULL; + } else { + cinfo->global_state = CSTATE_START; + } +} + + +/* + * Destruction of a JPEG object. + * + * Everything gets deallocated except the master jpeg_compress_struct itself + * and the error manager struct. Both of these are supplied by the application + * and must be freed, if necessary, by the application. (Often they are on + * the stack and so don't need to be freed anyway.) + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_destroy (j_common_ptr cinfo) +{ + /* We need only tell the memory manager to release everything. */ + /* NB: mem pointer is NULL if memory mgr failed to initialize. */ + if (cinfo->mem != NULL) + (*cinfo->mem->self_destruct) (cinfo); + cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ + cinfo->global_state = 0; /* mark it destroyed */ +} + + +/* + * Convenience routines for allocating quantization and Huffman tables. + * (Would jutils.c be a more reasonable place to put these?) + */ + +GLOBAL(JQUANT_TBL *) +jpeg_alloc_quant_table (j_common_ptr cinfo) +{ + JQUANT_TBL *tbl; + + tbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} + + +GLOBAL(JHUFF_TBL *) +jpeg_alloc_huff_table (j_common_ptr cinfo) +{ + JHUFF_TBL *tbl; + + tbl = (JHUFF_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcparam.c b/third_party/libjpeg/fpdfapi_jcparam.c new file mode 100644 index 0000000000..f3ea109878 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcparam.c @@ -0,0 +1,613 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcparam.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains optional default-setting code for the JPEG compressor. + * Applications do not have to use this file, but those that don't use it + * must know a lot more about the innards of the JPEG code. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Quantization table setup routines + */ + +GLOBAL(void) +jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, boolean force_baseline) +/* Define a quantization table equal to the basic_table times + * a scale factor (given as a percentage). + * If force_baseline is TRUE, the computed quantization table entries + * are limited to 1..255 for JPEG baseline compatibility. + */ +{ + JQUANT_TBL ** qtblptr; + int i; + long temp; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl); + + qtblptr = & cinfo->quant_tbl_ptrs[which_tbl]; + + if (*qtblptr == NULL) + *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo); + + for (i = 0; i < DCTSIZE2; i++) { + temp = ((long) basic_table[i] * scale_factor + 50L) / 100L; + /* limit the values to the valid range */ + if (temp <= 0L) temp = 1L; + if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */ + if (force_baseline && temp > 255L) + temp = 255L; /* limit to baseline range if requested */ + (*qtblptr)->quantval[i] = (UINT16) temp; + } + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + (*qtblptr)->sent_table = FALSE; +} + + +GLOBAL(void) +jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, + boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables + * and a straight percentage-scaling quality scale. In most cases it's better + * to use jpeg_set_quality (below); this entry point is provided for + * applications that insist on a linear percentage scaling. + */ +{ + /* These are the sample quantization tables given in JPEG spec section K.1. + * The spec says that the values given produce "good" quality, and + * when divided by 2, "very good" quality. + */ + static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { + 16, 11, 10, 16, 24, 40, 51, 61, + 12, 12, 14, 19, 26, 58, 60, 55, + 14, 13, 16, 24, 40, 57, 69, 56, + 14, 17, 22, 29, 51, 87, 80, 62, + 18, 22, 37, 56, 68, 109, 103, 77, + 24, 35, 55, 64, 81, 104, 113, 92, + 49, 64, 78, 87, 103, 121, 120, 101, + 72, 92, 95, 98, 112, 100, 103, 99 + }; + static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { + 17, 18, 24, 47, 99, 99, 99, 99, + 18, 21, 26, 66, 99, 99, 99, 99, + 24, 26, 56, 99, 99, 99, 99, 99, + 47, 66, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99 + }; + + /* Set up two quantization tables using the specified scaling */ + jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, + scale_factor, force_baseline); + jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, + scale_factor, force_baseline); +} + + +GLOBAL(int) +jpeg_quality_scaling (int quality) +/* Convert a user-specified quality rating to a percentage scaling factor + * for an underlying quantization table, using our recommended scaling curve. + * The input 'quality' factor should be 0 (terrible) to 100 (very good). + */ +{ + /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */ + if (quality <= 0) quality = 1; + if (quality > 100) quality = 100; + + /* The basic table is used as-is (scaling 100) for a quality of 50. + * Qualities 50..100 are converted to scaling percentage 200 - 2*Q; + * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table + * to make all the table entries 1 (hence, minimum quantization loss). + * Qualities 1..50 are converted to scaling percentage 5000/Q. + */ + if (quality < 50) + quality = 5000 / quality; + else + quality = 200 - quality*2; + + return quality; +} + + +GLOBAL(void) +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables. + * This is the standard quality-adjusting entry point for typical user + * interfaces; only those who want detailed control over quantization tables + * would use the preceding three routines directly. + */ +{ + /* Convert user 0-100 rating to percentage scaling */ + quality = jpeg_quality_scaling(quality); + + /* Set up standard quality tables */ + jpeg_set_linear_quality(cinfo, quality, force_baseline); +} + + +/* + * Huffman table setup routines + */ + +LOCAL(void) +add_huff_table (j_compress_ptr cinfo, + JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) +/* Define a Huffman table */ +{ + int nsymbols, len; + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + /* Copy the number-of-symbols-of-each-code-length counts */ + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + + /* Validate the counts. We do this here mainly so we can copy the right + * number of symbols from the val[] array, without risking marching off + * the end of memory. jchuff.c will do a more thorough test later. + */ + nsymbols = 0; + for (len = 1; len <= 16; len++) + nsymbols += bits[len]; + if (nsymbols < 1 || nsymbols > 256) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8)); + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + (*htblptr)->sent_table = FALSE; +} + + +LOCAL(void) +std_huff_tables (j_compress_ptr cinfo) +/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ +/* IMPORTANT: these are only valid for 8-bit data precision! */ +{ + static const UINT8 bits_dc_luminance[17] = + { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_luminance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_dc_chrominance[17] = + { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_chrominance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_ac_luminance[17] = + { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; + static const UINT8 val_ac_luminance[] = + { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, + 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, + 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, + 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, + 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, + 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, + 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, + 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, + 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, + 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, + 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, + 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, + 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, + 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, + 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, + 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, + 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, + 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + static const UINT8 bits_ac_chrominance[17] = + { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; + static const UINT8 val_ac_chrominance[] = + { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, + 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, + 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, + 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, + 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, + 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, + 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, + 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, + 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, + 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, + 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, + 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, + 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, + 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, + 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, + 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], + bits_dc_luminance, val_dc_luminance); + add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], + bits_ac_luminance, val_ac_luminance); + add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], + bits_dc_chrominance, val_dc_chrominance); + add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], + bits_ac_chrominance, val_ac_chrominance); +} + + +/* + * Default parameter setup for compression. + * + * Applications that don't choose to use this routine must do their + * own setup of all these parameters. Alternately, you can call this + * to establish defaults and then alter parameters selectively. This + * is the recommended approach since, if we add any new parameters, + * your code will still work (they'll be set to reasonable defaults). + */ + +GLOBAL(void) +jpeg_set_defaults (j_compress_ptr cinfo) +{ + int i; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Allocate comp_info array large enough for maximum component count. + * Array is made permanent in case application wants to compress + * multiple images at same param settings. + */ + if (cinfo->comp_info == NULL) + cinfo->comp_info = (jpeg_component_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + MAX_COMPONENTS * SIZEOF(jpeg_component_info)); + + /* Initialize everything not dependent on the color space */ + + cinfo->data_precision = BITS_IN_JSAMPLE; + /* Set up two quantization tables using default quality of 75 */ + jpeg_set_quality(cinfo, 75, TRUE); + /* Set up two Huffman tables */ + std_huff_tables(cinfo); + + /* Initialize default arithmetic coding conditioning */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + + /* Default is no multiple-scan output */ + cinfo->scan_info = NULL; + cinfo->num_scans = 0; + + /* Expect normal source image, not raw downsampled data */ + cinfo->raw_data_in = FALSE; + + /* Use Huffman coding, not arithmetic coding, by default */ + cinfo->arith_code = FALSE; + + /* By default, don't do extra passes to optimize entropy coding */ + cinfo->optimize_coding = FALSE; + /* The standard Huffman tables are only valid for 8-bit data precision. + * If the precision is higher, force optimization on so that usable + * tables will be computed. This test can be removed if default tables + * are supplied that are valid for the desired precision. + */ + if (cinfo->data_precision > 8) + cinfo->optimize_coding = TRUE; + + /* By default, use the simpler non-cosited sampling alignment */ + cinfo->CCIR601_sampling = FALSE; + + /* No input smoothing */ + cinfo->smoothing_factor = 0; + + /* DCT algorithm preference */ + cinfo->dct_method = JDCT_DEFAULT; + + /* No restart markers */ + cinfo->restart_interval = 0; + cinfo->restart_in_rows = 0; + + /* Fill in default JFIF marker parameters. Note that whether the marker + * will actually be written is determined by jpeg_set_colorspace. + * + * By default, the library emits JFIF version code 1.01. + * An application that wants to emit JFIF 1.02 extension markers should set + * JFIF_minor_version to 2. We could probably get away with just defaulting + * to 1.02, but there may still be some decoders in use that will complain + * about that; saying 1.01 should minimize compatibility problems. + */ + cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */ + cinfo->JFIF_minor_version = 1; + cinfo->density_unit = 0; /* Pixel size is unknown by default */ + cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ + cinfo->Y_density = 1; + + /* Choose JPEG colorspace based on input space, set defaults accordingly */ + + jpeg_default_colorspace(cinfo); +} + + +/* + * Select an appropriate JPEG colorspace for in_color_space. + */ + +GLOBAL(void) +jpeg_default_colorspace (j_compress_ptr cinfo) +{ + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); + break; + case JCS_RGB: + jpeg_set_colorspace(cinfo, JCS_YCbCr); + break; + case JCS_YCbCr: + jpeg_set_colorspace(cinfo, JCS_YCbCr); + break; + case JCS_CMYK: + jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */ + break; + case JCS_YCCK: + jpeg_set_colorspace(cinfo, JCS_YCCK); + break; + case JCS_UNKNOWN: + jpeg_set_colorspace(cinfo, JCS_UNKNOWN); + break; + default: + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + } +} + + +/* + * Set the JPEG colorspace, and choose colorspace-dependent default values. + */ + +GLOBAL(void) +jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) +{ + jpeg_component_info * compptr; + int ci; + +#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \ + (compptr = &cinfo->comp_info[index], \ + compptr->component_id = (id), \ + compptr->h_samp_factor = (hsamp), \ + compptr->v_samp_factor = (vsamp), \ + compptr->quant_tbl_no = (quant), \ + compptr->dc_tbl_no = (dctbl), \ + compptr->ac_tbl_no = (actbl) ) + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* For all colorspaces, we use Q and Huff tables 0 for luminance components, + * tables 1 for chrominance components. + */ + + cinfo->jpeg_color_space = colorspace; + + cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */ + cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ + + switch (colorspace) { + case JCS_GRAYSCALE: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->num_components = 1; + /* JFIF specifies component ID 1 */ + SET_COMP(0, 1, 1,1, 0, 0,0); + break; + case JCS_RGB: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ + cinfo->num_components = 3; + SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0); + SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0); + SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0); + break; + case JCS_YCbCr: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->num_components = 3; + /* JFIF specifies component IDs 1,2,3 */ + /* We default to 2x2 subsamples of chrominance */ + SET_COMP(0, 1, 2,2, 0, 0,0); + SET_COMP(1, 2, 1,1, 1, 1,1); + SET_COMP(2, 3, 1,1, 1, 1,1); + break; + case JCS_CMYK: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ + cinfo->num_components = 4; + SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0); + SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0); + SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0); + SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0); + break; + case JCS_YCCK: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ + cinfo->num_components = 4; + SET_COMP(0, 1, 2,2, 0, 0,0); + SET_COMP(1, 2, 1,1, 1, 1,1); + SET_COMP(2, 3, 1,1, 1, 1,1); + SET_COMP(3, 4, 2,2, 0, 0,0); + break; + case JCS_UNKNOWN: + cinfo->num_components = cinfo->input_components; + if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + for (ci = 0; ci < cinfo->num_components; ci++) { + SET_COMP(ci, ci, 1,1, 0, 0,0); + } + break; + default: + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + } +} + + +#ifdef C_PROGRESSIVE_SUPPORTED + +LOCAL(jpeg_scan_info *) +fill_a_scan (jpeg_scan_info * scanptr, int ci, + int Ss, int Se, int Ah, int Al) +/* Support routine: generate one scan for specified component */ +{ + scanptr->comps_in_scan = 1; + scanptr->component_index[0] = ci; + scanptr->Ss = Ss; + scanptr->Se = Se; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + return scanptr; +} + +LOCAL(jpeg_scan_info *) +fill_scans (jpeg_scan_info * scanptr, int ncomps, + int Ss, int Se, int Ah, int Al) +/* Support routine: generate one scan for each component */ +{ + int ci; + + for (ci = 0; ci < ncomps; ci++) { + scanptr->comps_in_scan = 1; + scanptr->component_index[0] = ci; + scanptr->Ss = Ss; + scanptr->Se = Se; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + } + return scanptr; +} + +LOCAL(jpeg_scan_info *) +fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al) +/* Support routine: generate interleaved DC scan if possible, else N scans */ +{ + int ci; + + if (ncomps <= MAX_COMPS_IN_SCAN) { + /* Single interleaved DC scan */ + scanptr->comps_in_scan = ncomps; + for (ci = 0; ci < ncomps; ci++) + scanptr->component_index[ci] = ci; + scanptr->Ss = scanptr->Se = 0; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + } else { + /* Noninterleaved DC scan for each component */ + scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al); + } + return scanptr; +} + + +/* + * Create a recommended progressive-JPEG script. + * cinfo->num_components and cinfo->jpeg_color_space must be correct. + */ + +GLOBAL(void) +jpeg_simple_progression (j_compress_ptr cinfo) +{ + int ncomps = cinfo->num_components; + int nscans; + jpeg_scan_info * scanptr; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Figure space needed for script. Calculation must match code below! */ + if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { + /* Custom script for YCbCr color images. */ + nscans = 10; + } else { + /* All-purpose script for other color spaces. */ + if (ncomps > MAX_COMPS_IN_SCAN) + nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */ + else + nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */ + } + + /* Allocate space for script. + * We need to put it in the permanent pool in case the application performs + * multiple compressions without changing the settings. To avoid a memory + * leak if jpeg_simple_progression is called repeatedly for the same JPEG + * object, we try to re-use previously allocated space, and we allocate + * enough space to handle YCbCr even if initially asked for grayscale. + */ + if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) { + cinfo->script_space_size = MAX(nscans, 10); + cinfo->script_space = (jpeg_scan_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + cinfo->script_space_size * SIZEOF(jpeg_scan_info)); + } + scanptr = cinfo->script_space; + cinfo->scan_info = scanptr; + cinfo->num_scans = nscans; + + if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { + /* Custom script for YCbCr color images. */ + /* Initial DC scan */ + scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); + /* Initial AC scan: get some luma data out in a hurry */ + scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2); + /* Chroma data is too small to be worth expending many scans on */ + scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1); + scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1); + /* Complete spectral selection for luma AC */ + scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2); + /* Refine next bit of luma AC */ + scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1); + /* Finish DC successive approximation */ + scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); + /* Finish AC successive approximation */ + scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0); + scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0); + /* Luma bottom bit comes last since it's usually largest scan */ + scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0); + } else { + /* All-purpose script for other color spaces. */ + /* Successive approximation first pass */ + scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); + scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2); + scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2); + /* Successive approximation second pass */ + scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1); + /* Successive approximation final pass */ + scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); + scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0); + } +} + +#endif /* C_PROGRESSIVE_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcphuff.c b/third_party/libjpeg/fpdfapi_jcphuff.c new file mode 100644 index 0000000000..6d89b6b2c0 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcphuff.c @@ -0,0 +1,836 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcphuff.c + * + * Copyright (C) 1995-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy encoding routines for progressive JPEG. + * + * We do not support output suspension in this module, since the library + * currently does not allow multiple-scan files to be written with output + * suspension. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jchuff.h" /* Declarations shared with jchuff.c */ + +#ifdef C_PROGRESSIVE_SUPPORTED + +/* Expanded entropy encoder object for progressive Huffman encoding. */ + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + /* Mode flag: TRUE for optimization, FALSE for actual data output */ + boolean gather_statistics; + + /* Bit-level coding status. + * next_output_byte/free_in_buffer are local copies of cinfo->dest fields. + */ + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + INT32 put_buffer; /* current bit-accumulation buffer */ + int put_bits; /* # of bits now in it */ + j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ + + /* Coding status for DC components */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + + /* Coding status for AC components */ + int ac_tbl_no; /* the table number of the single component */ + unsigned int EOBRUN; /* run length of EOBs */ + unsigned int BE; /* # of buffered correction bits before MCU */ + char * bit_buffer; /* buffer for correction bits (1 per char) */ + /* packing correction bits tightly would save some space but cost time... */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to derived tables (these workspaces have image lifespan). + * Since any one scan codes only DC or only AC, we only need one set + * of tables, not one for DC and one for AC. + */ + c_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; + + /* Statistics tables for optimization; again, one set is enough */ + long * count_ptrs[NUM_HUFF_TBLS]; +} phuff_entropy_encoder; + +typedef phuff_entropy_encoder * phuff_entropy_ptr; + +/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit + * buffer can hold. Larger sizes may slightly improve compression, but + * 1000 is already well into the realm of overkill. + * The minimum safe size is 64 bits. + */ + +#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + +/* Forward declarations */ +METHODDEF(boolean) encode_mcu_DC_first JPP((j_compress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(boolean) encode_mcu_AC_first JPP((j_compress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(boolean) encode_mcu_DC_refine JPP((j_compress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(boolean) encode_mcu_AC_refine JPP((j_compress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(void) finish_pass_phuff JPP((j_compress_ptr cinfo)); +METHODDEF(void) finish_pass_gather_phuff JPP((j_compress_ptr cinfo)); + + +/* + * Initialize for a Huffman-compressed scan using progressive JPEG. + */ + +METHODDEF(void) +start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + boolean is_DC_band; + int ci, tbl; + jpeg_component_info * compptr; + + entropy->cinfo = cinfo; + entropy->gather_statistics = gather_statistics; + + is_DC_band = (cinfo->Ss == 0); + + /* We assume jcmaster.c already validated the scan parameters. */ + + /* Select execution routines */ + if (cinfo->Ah == 0) { + if (is_DC_band) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (is_DC_band) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else { + entropy->pub.encode_mcu = encode_mcu_AC_refine; + /* AC refinement needs a correction bit buffer */ + if (entropy->bit_buffer == NULL) + entropy->bit_buffer = (char *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + MAX_CORR_BITS * SIZEOF(char)); + } + } + if (gather_statistics) + entropy->pub.finish_pass = finish_pass_gather_phuff; + else + entropy->pub.finish_pass = finish_pass_phuff; + + /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1 + * for AC coefficients. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + /* Get table index */ + if (is_DC_band) { + if (cinfo->Ah != 0) /* DC refinement needs no table */ + continue; + tbl = compptr->dc_tbl_no; + } else { + entropy->ac_tbl_no = tbl = compptr->ac_tbl_no; + } + if (gather_statistics) { + /* Check for invalid table index */ + /* (make_c_derived_tbl does this in the other path) */ + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + /* Allocate and zero the statistics tables */ + /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ + if (entropy->count_ptrs[tbl] == NULL) + entropy->count_ptrs[tbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + /* Compute derived values for Huffman table */ + /* We may do this more than once for a table, but it's not expensive */ + jpeg_make_c_derived_tbl(cinfo, is_DC_band, tbl, + & entropy->derived_tbls[tbl]); + } + } + + /* Initialize AC stuff */ + entropy->EOBRUN = 0; + entropy->BE = 0; + + /* Initialize bit buffer to empty */ + entropy->put_buffer = 0; + entropy->put_bits = 0; + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* Outputting bytes to the file. + * NB: these must be called only when actually outputting, + * that is, entropy->gather_statistics == FALSE. + */ + +/* Emit a byte */ +#define emit_byte(entropy,val) \ + { *(entropy)->next_output_byte++ = (JOCTET) (val); \ + if (--(entropy)->free_in_buffer == 0) \ + dump_buffer(entropy); } + + +LOCAL(void) +dump_buffer (phuff_entropy_ptr entropy) +/* Empty the output buffer; we do not support suspension in this module. */ +{ + struct jpeg_destination_mgr * dest = entropy->cinfo->dest; + + if (! (*dest->empty_output_buffer) (entropy->cinfo)) + ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); + /* After a successful buffer dump, must reset buffer pointers */ + entropy->next_output_byte = dest->next_output_byte; + entropy->free_in_buffer = dest->free_in_buffer; +} + + +/* Outputting bits to the file */ + +/* Only the right 24 bits of put_buffer are used; the valid bits are + * left-justified in this part. At most 16 bits can be passed to emit_bits + * in one call, and we never retain more than 7 bits in put_buffer + * between calls, so 24 bits are sufficient. + */ + +INLINE +LOCAL(void) +emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size) +/* Emit some bits, unless we are in gather mode */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer = (INT32) code; + register int put_bits = entropy->put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + if (entropy->gather_statistics) + return; /* do nothing if we're only getting stats */ + + put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */ + + put_bits += size; /* new number of bits in buffer */ + + put_buffer <<= 24 - put_bits; /* align incoming bits */ + + put_buffer |= entropy->put_buffer; /* and merge with old buffer contents */ + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte(entropy, c); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte(entropy, 0); + } + put_buffer <<= 8; + put_bits -= 8; + } + + entropy->put_buffer = put_buffer; /* update variables */ + entropy->put_bits = put_bits; +} + + +LOCAL(void) +flush_bits (phuff_entropy_ptr entropy) +{ + emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */ + entropy->put_buffer = 0; /* and reset bit-buffer to empty */ + entropy->put_bits = 0; +} + + +/* + * Emit (or just count) a Huffman symbol. + */ + +INLINE +LOCAL(void) +emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->derived_tbls[tbl_no]; + emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +/* + * Emit bits from a correction bit buffer. + */ + +LOCAL(void) +emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart, + unsigned int nbits) +{ + if (entropy->gather_statistics) + return; /* no real work */ + + while (nbits > 0) { + emit_bits(entropy, (unsigned int) (*bufstart), 1); + bufstart++; + nbits--; + } +} + + +/* + * Emit any pending EOBRUN symbol. + */ + +LOCAL(void) +emit_eobrun (phuff_entropy_ptr entropy) +{ + register int temp, nbits; + + if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ + temp = entropy->EOBRUN; + nbits = 0; + while ((temp >>= 1)) + nbits++; + /* safety check: shouldn't happen given limited correction-bit buffer */ + if (nbits > 14) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4); + if (nbits) + emit_bits(entropy, entropy->EOBRUN, nbits); + + entropy->EOBRUN = 0; + + /* Emit any buffered correction bits */ + emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); + entropy->BE = 0; + } +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(void) +emit_restart (phuff_entropy_ptr entropy, int restart_num) +{ + int ci; + + emit_eobrun(entropy); + + if (! entropy->gather_statistics) { + flush_bits(entropy); + emit_byte(entropy, 0xFF); + emit_byte(entropy, JPEG_RST0 + restart_num); + } + + if (entropy->cinfo->Ss == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) + entropy->last_dc_val[ci] = 0; + } else { + /* Re-initialize all AC-related fields to 0 */ + entropy->EOBRUN = 0; + entropy->BE = 0; + } +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + register int temp, temp2; + register int nbits; + int blkn, ci; + int Al = cinfo->Al; + JBLOCKROW block; + jpeg_component_info * compptr; + ISHIFT_TEMPS + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart(entropy, entropy->next_restart_num); + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al); + + /* DC differences are figured on the point-transformed values. */ + temp = temp2 - entropy->last_dc_val[ci]; + entropy->last_dc_val[ci] = temp2; + + /* Encode the DC coefficient difference per section G.1.2.1 */ + temp2 = temp; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit the Huffman-coded symbol for the number of bits */ + emit_symbol(entropy, compptr->dc_tbl_no, nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + emit_bits(entropy, (unsigned int) temp2, nbits); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + register int temp, temp2; + register int nbits; + register int r, k; + int Se = cinfo->Se; + int Al = cinfo->Al; + JBLOCKROW block; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart(entropy, entropy->next_restart_num); + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ + + r = 0; /* r = run length of zeros */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = (*block)[jpeg_natural_order[k]]) == 0) { + r++; + continue; + } + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value; so the code is + * interwoven with finding the abs value (temp) and output bits (temp2). + */ + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ + temp2 = ~temp; + } else { + temp >>= Al; /* apply the point transform */ + temp2 = temp; + } + /* Watch out for case that nonzero coef is zero after point transform */ + if (temp == 0) { + r++; + continue; + } + + /* Emit any pending EOBRUN */ + if (entropy->EOBRUN > 0) + emit_eobrun(entropy); + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + emit_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + emit_bits(entropy, (unsigned int) temp2, nbits); + + r = 0; /* reset zero run length */ + } + + if (r > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + if (entropy->EOBRUN == 0x7FFF) + emit_eobrun(entropy); /* force it out to avoid overflow */ + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, although the spec + * is not very clear on the point. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + register int temp; + int blkn; + int Al = cinfo->Al; + JBLOCKROW block; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart(entropy, entropy->next_restart_num); + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + + /* We simply emit the Al'th bit of the DC coefficient value. */ + temp = (*block)[0]; + emit_bits(entropy, (unsigned int) (temp >> Al), 1); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + register int temp; + register int r, k; + int EOB; + char *BR_buffer; + unsigned int BR; + int Se = cinfo->Se; + int Al = cinfo->Al; + JBLOCKROW block; + int absvalues[DCTSIZE2]; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart(entropy, entropy->next_restart_num); + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* It is convenient to make a pre-pass to determine the transformed + * coefficients' absolute values and the EOB position. + */ + EOB = 0; + for (k = cinfo->Ss; k <= Se; k++) { + temp = (*block)[jpeg_natural_order[k]]; + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if (temp < 0) + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + absvalues[k] = temp; /* save abs value for main pass */ + if (temp == 1) + EOB = k; /* EOB = index of last newly-nonzero coef */ + } + + /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ + + r = 0; /* r = run length of zeros */ + BR = 0; /* BR = count of buffered bits added now */ + BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = absvalues[k]) == 0) { + r++; + continue; + } + + /* Emit any required ZRLs, but not if they can be folded into EOB */ + while (r > 15 && k <= EOB) { + /* emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + /* Emit ZRL */ + emit_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + /* Emit buffered correction bits that must be associated with ZRL */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + } + + /* If the coef was previously nonzero, it only needs a correction bit. + * NOTE: a straight translation of the spec's figure G.7 would suggest + * that we also need to test r > 15. But if r > 15, we can only get here + * if k > EOB, which implies that this coefficient is not 1. + */ + if (temp > 1) { + /* The correction bit is the next bit of the absolute value. */ + BR_buffer[BR++] = (char) (temp & 1); + continue; + } + + /* Emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); + + /* Emit output bit for newly-nonzero coef */ + temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1; + emit_bits(entropy, (unsigned int) temp, 1); + + /* Emit buffered correction bits that must be associated with this code */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + r = 0; /* reset zero run length */ + } + + if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + entropy->BE += BR; /* concat my correction bits to older ones */ + /* We force out the EOB if we risk either: + * 1. overflow of the EOB counter; + * 2. overflow of the correction bit buffer during the next MCU. + */ + if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) + emit_eobrun(entropy); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * Finish up at the end of a Huffman-compressed progressive scan. + */ + +METHODDEF(void) +finish_pass_phuff (j_compress_ptr cinfo) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Flush out any buffered data */ + emit_eobrun(entropy); + flush_bits(entropy); + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; +} + + +/* + * Finish up a statistics-gathering pass and create the new Huffman tables. + */ + +METHODDEF(void) +finish_pass_gather_phuff (j_compress_ptr cinfo) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + boolean is_DC_band; + int ci, tbl; + jpeg_component_info * compptr; + JHUFF_TBL **htblptr; + boolean did[NUM_HUFF_TBLS]; + + /* Flush out buffered data (all we care about is counting the EOB symbol) */ + emit_eobrun(entropy); + + is_DC_band = (cinfo->Ss == 0); + + /* It's important not to apply jpeg_gen_optimal_table more than once + * per table, because it clobbers the input frequency counts! + */ + MEMZERO(did, SIZEOF(did)); + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (is_DC_band) { + if (cinfo->Ah != 0) /* DC refinement needs no table */ + continue; + tbl = compptr->dc_tbl_no; + } else { + tbl = compptr->ac_tbl_no; + } + if (! did[tbl]) { + if (is_DC_band) + htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; + else + htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]); + did[tbl] = TRUE; + } + } +} + + +/* + * Module initialization routine for progressive Huffman entropy encoding. + */ + +GLOBAL(void) +jinit_phuff_encoder (j_compress_ptr cinfo) +{ + phuff_entropy_ptr entropy; + int i; + + entropy = (phuff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(phuff_entropy_encoder)); + cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; + entropy->pub.start_pass = start_pass_phuff; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->derived_tbls[i] = NULL; + entropy->count_ptrs[i] = NULL; + } + entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ +} + +#endif /* C_PROGRESSIVE_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcprepct.c b/third_party/libjpeg/fpdfapi_jcprepct.c new file mode 100644 index 0000000000..57f3fc1108 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcprepct.c @@ -0,0 +1,357 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcprepct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the compression preprocessing controller. + * This controller manages the color conversion, downsampling, + * and edge expansion steps. + * + * Most of the complexity here is associated with buffering input rows + * as required by the downsampler. See the comments at the head of + * jcsample.c for the downsampler's needs. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* At present, jcsample.c can request context rows only for smoothing. + * In the future, we might also need context rows for CCIR601 sampling + * or other more-complex downsampling procedures. The code to support + * context rows should be compiled only if needed. + */ +#ifdef INPUT_SMOOTHING_SUPPORTED +#define CONTEXT_ROWS_SUPPORTED +#endif + + +/* + * For the simple (no-context-row) case, we just need to buffer one + * row group's worth of pixels for the downsampling step. At the bottom of + * the image, we pad to a full row group by replicating the last pixel row. + * The downsampler's last output row is then replicated if needed to pad + * out to a full iMCU row. + * + * When providing context rows, we must buffer three row groups' worth of + * pixels. Three row groups are physically allocated, but the row pointer + * arrays are made five row groups high, with the extra pointers above and + * below "wrapping around" to point to the last and first real row groups. + * This allows the downsampler to access the proper context rows. + * At the top and bottom of the image, we create dummy context rows by + * copying the first or last real pixel row. This copying could be avoided + * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the + * trouble on the compression side. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_prep_controller pub; /* public fields */ + + /* Downsampling input buffer. This buffer holds color-converted data + * until we have enough to do a downsample step. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + JDIMENSION rows_to_go; /* counts rows remaining in source image */ + int next_buf_row; /* index of next row to store in color_buf */ + +#ifdef CONTEXT_ROWS_SUPPORTED /* only needed for context case */ + int this_row_group; /* starting row index of group to process */ + int next_buf_stop; /* downsample when we reach this index */ +#endif +} my_prep_controller; + +typedef my_prep_controller * my_prep_ptr; + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + + if (pass_mode != JBUF_PASS_THRU) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Initialize total-height counter for detecting bottom of image */ + prep->rows_to_go = cinfo->image_height; + /* Mark the conversion buffer empty */ + prep->next_buf_row = 0; +#ifdef CONTEXT_ROWS_SUPPORTED + /* Preset additional state variables for context mode. + * These aren't used in non-context mode, so we needn't test which mode. + */ + prep->this_row_group = 0; + /* Set next_buf_stop to stop after two row groups have been read in. */ + prep->next_buf_stop = 2 * cinfo->max_v_samp_factor; +#endif +} + + +/* + * Expand an image vertically from height input_rows to height output_rows, + * by duplicating the bottom row. + */ + +LOCAL(void) +expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols, + int input_rows, int output_rows) +{ + register int row; + + for (row = input_rows; row < output_rows; row++) { + jcopy_sample_rows(image_data, input_rows-1, image_data, row, + 1, num_cols); + } +} + + +/* + * Process some data in the simple no-context case. + * + * Preprocessor output data is counted in "row groups". A row group + * is defined to be v_samp_factor sample rows of each component. + * Downsampling will produce this much data from each max_v_samp_factor + * input rows. + */ + +METHODDEF(void) +pre_process_data (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int numrows, ci; + JDIMENSION inrows; + jpeg_component_info * compptr; + + while (*in_row_ctr < in_rows_avail && + *out_row_group_ctr < out_row_groups_avail) { + /* Do color conversion to fill the conversion buffer. */ + inrows = in_rows_avail - *in_row_ctr; + numrows = cinfo->max_v_samp_factor - prep->next_buf_row; + numrows = (int) MIN((JDIMENSION) numrows, inrows); + (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, + prep->color_buf, + (JDIMENSION) prep->next_buf_row, + numrows); + *in_row_ctr += numrows; + prep->next_buf_row += numrows; + prep->rows_to_go -= numrows; + /* If at bottom of image, pad to fill the conversion buffer. */ + if (prep->rows_to_go == 0 && + prep->next_buf_row < cinfo->max_v_samp_factor) { + for (ci = 0; ci < cinfo->num_components; ci++) { + expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, + prep->next_buf_row, cinfo->max_v_samp_factor); + } + prep->next_buf_row = cinfo->max_v_samp_factor; + } + /* If we've filled the conversion buffer, empty it. */ + if (prep->next_buf_row == cinfo->max_v_samp_factor) { + (*cinfo->downsample->downsample) (cinfo, + prep->color_buf, (JDIMENSION) 0, + output_buf, *out_row_group_ctr); + prep->next_buf_row = 0; + (*out_row_group_ctr)++; + } + /* If at bottom of image, pad the output to a full iMCU height. + * Note we assume the caller is providing a one-iMCU-height output buffer! + */ + if (prep->rows_to_go == 0 && + *out_row_group_ctr < out_row_groups_avail) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + expand_bottom_edge(output_buf[ci], + compptr->width_in_blocks * DCTSIZE, + (int) (*out_row_group_ctr * compptr->v_samp_factor), + (int) (out_row_groups_avail * compptr->v_samp_factor)); + } + *out_row_group_ctr = out_row_groups_avail; + break; /* can exit outer loop without test */ + } + } +} + + +#ifdef CONTEXT_ROWS_SUPPORTED + +/* + * Process some data in the context case. + */ + +METHODDEF(void) +pre_process_context (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int numrows, ci; + int buf_height = cinfo->max_v_samp_factor * 3; + JDIMENSION inrows; + + while (*out_row_group_ctr < out_row_groups_avail) { + if (*in_row_ctr < in_rows_avail) { + /* Do color conversion to fill the conversion buffer. */ + inrows = in_rows_avail - *in_row_ctr; + numrows = prep->next_buf_stop - prep->next_buf_row; + numrows = (int) MIN((JDIMENSION) numrows, inrows); + (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, + prep->color_buf, + (JDIMENSION) prep->next_buf_row, + numrows); + /* Pad at top of image, if first time through */ + if (prep->rows_to_go == cinfo->image_height) { + for (ci = 0; ci < cinfo->num_components; ci++) { + int row; + for (row = 1; row <= cinfo->max_v_samp_factor; row++) { + jcopy_sample_rows(prep->color_buf[ci], 0, + prep->color_buf[ci], -row, + 1, cinfo->image_width); + } + } + } + *in_row_ctr += numrows; + prep->next_buf_row += numrows; + prep->rows_to_go -= numrows; + } else { + /* Return for more data, unless we are at the bottom of the image. */ + if (prep->rows_to_go != 0) + break; + /* When at bottom of image, pad to fill the conversion buffer. */ + if (prep->next_buf_row < prep->next_buf_stop) { + for (ci = 0; ci < cinfo->num_components; ci++) { + expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, + prep->next_buf_row, prep->next_buf_stop); + } + prep->next_buf_row = prep->next_buf_stop; + } + } + /* If we've gotten enough data, downsample a row group. */ + if (prep->next_buf_row == prep->next_buf_stop) { + (*cinfo->downsample->downsample) (cinfo, + prep->color_buf, + (JDIMENSION) prep->this_row_group, + output_buf, *out_row_group_ctr); + (*out_row_group_ctr)++; + /* Advance pointers with wraparound as necessary. */ + prep->this_row_group += cinfo->max_v_samp_factor; + if (prep->this_row_group >= buf_height) + prep->this_row_group = 0; + if (prep->next_buf_row >= buf_height) + prep->next_buf_row = 0; + prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor; + } + } +} + + +/* + * Create the wrapped-around downsampling input buffer needed for context mode. + */ + +LOCAL(void) +create_context_buffer (j_compress_ptr cinfo) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int rgroup_height = cinfo->max_v_samp_factor; + int ci, i; + jpeg_component_info * compptr; + JSAMPARRAY true_buffer, fake_buffer; + + /* Grab enough space for fake row pointers for all the components; + * we need five row groups' worth of pointers for each component. + */ + fake_buffer = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (cinfo->num_components * 5 * rgroup_height) * + SIZEOF(JSAMPROW)); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate the actual buffer space (3 row groups) for this component. + * We make the buffer wide enough to allow the downsampler to edge-expand + * horizontally within the buffer, if it so chooses. + */ + true_buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE * + cinfo->max_h_samp_factor) / compptr->h_samp_factor), + (JDIMENSION) (3 * rgroup_height)); + /* Copy true buffer row pointers into the middle of the fake row array */ + MEMCOPY(fake_buffer + rgroup_height, true_buffer, + 3 * rgroup_height * SIZEOF(JSAMPROW)); + /* Fill in the above and below wraparound pointers */ + for (i = 0; i < rgroup_height; i++) { + fake_buffer[i] = true_buffer[2 * rgroup_height + i]; + fake_buffer[4 * rgroup_height + i] = true_buffer[i]; + } + prep->color_buf[ci] = fake_buffer + rgroup_height; + fake_buffer += 5 * rgroup_height; /* point to space for next component */ + } +} + +#endif /* CONTEXT_ROWS_SUPPORTED */ + + +/* + * Initialize preprocessing controller. + */ + +GLOBAL(void) +jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_prep_ptr prep; + int ci; + jpeg_component_info * compptr; + + if (need_full_buffer) /* safety check */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + prep = (my_prep_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_prep_controller)); + cinfo->prep = (struct jpeg_c_prep_controller *) prep; + prep->pub.start_pass = start_pass_prep; + + /* Allocate the color conversion buffer. + * We make the buffer wide enough to allow the downsampler to edge-expand + * horizontally within the buffer, if it so chooses. + */ + if (cinfo->downsample->need_context_rows) { + /* Set up to provide context rows */ +#ifdef CONTEXT_ROWS_SUPPORTED + prep->pub.pre_process_data = pre_process_context; + create_context_buffer(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* No context, just make it tall enough for one row group */ + prep->pub.pre_process_data = pre_process_data; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + prep->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE * + cinfo->max_h_samp_factor) / compptr->h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jcsample.c b/third_party/libjpeg/fpdfapi_jcsample.c new file mode 100644 index 0000000000..5e1e828740 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jcsample.c @@ -0,0 +1,522 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jcsample.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains downsampling routines. + * + * Downsampling input data is counted in "row groups". A row group + * is defined to be max_v_samp_factor pixel rows of each component, + * from which the downsampler produces v_samp_factor sample rows. + * A single row group is processed in each call to the downsampler module. + * + * The downsampler is responsible for edge-expansion of its output data + * to fill an integral number of DCT blocks horizontally. The source buffer + * may be modified if it is helpful for this purpose (the source buffer is + * allocated wide enough to correspond to the desired output width). + * The caller (the prep controller) is responsible for vertical padding. + * + * The downsampler may request "context rows" by setting need_context_rows + * during startup. In this case, the input arrays will contain at least + * one row group's worth of pixels above and below the passed-in data; + * the caller will create dummy rows at image top and bottom by replicating + * the first or last real pixel row. + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + * + * The downsampling algorithm used here is a simple average of the source + * pixels covered by the output pixel. The hi-falutin sampling literature + * refers to this as a "box filter". In general the characteristics of a box + * filter are not very good, but for the specific cases we normally use (1:1 + * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not + * nearly so bad. If you intend to use other sampling ratios, you'd be well + * advised to improve this code. + * + * A simple input-smoothing capability is provided. This is mainly intended + * for cleaning up color-dithered GIF input files (if you find it inadequate, + * we suggest using an external filtering program such as pnmconvol). When + * enabled, each input pixel P is replaced by a weighted sum of itself and its + * eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF, + * where SF = (smoothing_factor / 1024). + * Currently, smoothing is only supported for 2h2v sampling factors. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to downsample a single component */ +typedef JMETHOD(void, downsample1_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data)); + +/* Private subobject */ + +typedef struct { + struct jpeg_downsampler pub; /* public fields */ + + /* Downsampling method pointers, one per component */ + downsample1_ptr methods[MAX_COMPONENTS]; +} my_downsampler; + +typedef my_downsampler * my_downsample_ptr; + + +/* + * Initialize for a downsampling pass. + */ + +METHODDEF(void) +start_pass_downsample (j_compress_ptr cinfo) +{ + /* no work for now */ +} + + +/* + * Expand a component horizontally from width input_cols to width output_cols, + * by duplicating the rightmost samples. + */ + +LOCAL(void) +expand_right_edge (JSAMPARRAY image_data, int num_rows, + JDIMENSION input_cols, JDIMENSION output_cols) +{ + register JSAMPROW ptr; + register JSAMPLE pixval; + register int count; + int row; + int numcols = (int) (output_cols - input_cols); + + if (numcols > 0) { + for (row = 0; row < num_rows; row++) { + ptr = image_data[row] + input_cols; + pixval = ptr[-1]; /* don't need GETJSAMPLE() here */ + for (count = numcols; count > 0; count--) + *ptr++ = pixval; + } + } +} + + +/* + * Do downsampling for a whole row group (all components). + * + * In this version we simply downsample each component independently. + */ + +METHODDEF(void) +sep_downsample (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, JDIMENSION out_row_group_index) +{ + my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; + int ci; + jpeg_component_info * compptr; + JSAMPARRAY in_ptr, out_ptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + in_ptr = input_buf[ci] + in_row_index; + out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor); + (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr); + } +} + + +/* + * Downsample pixel values of a single component. + * One row group is processed per call. + * This version handles arbitrary integral sampling ratios, without smoothing. + * Note that this version is not actually used for customary sampling ratios. + */ + +METHODDEF(void) +int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v; + JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */ + JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + JSAMPROW inptr, outptr; + INT32 outvalue; + + h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor; + v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor; + numpix = h_expand * v_expand; + numpix2 = numpix/2; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * h_expand); + + inrow = 0; + for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { + outptr = output_data[outrow]; + for (outcol = 0, outcol_h = 0; outcol < output_cols; + outcol++, outcol_h += h_expand) { + outvalue = 0; + for (v = 0; v < v_expand; v++) { + inptr = input_data[inrow+v] + outcol_h; + for (h = 0; h < h_expand; h++) { + outvalue += (INT32) GETJSAMPLE(*inptr++); + } + } + *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix); + } + inrow += v_expand; + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the special case of a full-size component, + * without smoothing. + */ + +METHODDEF(void) +fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + /* Copy the data */ + jcopy_sample_rows(input_data, 0, output_data, 0, + cinfo->max_v_samp_factor, cinfo->image_width); + /* Edge-expand */ + expand_right_edge(output_data, cinfo->max_v_samp_factor, + cinfo->image_width, compptr->width_in_blocks * DCTSIZE); +} + + +/* + * Downsample pixel values of a single component. + * This version handles the common case of 2:1 horizontal and 1:1 vertical, + * without smoothing. + * + * A note about the "bias" calculations: when rounding fractional values to + * integer, we do not want to always round 0.5 up to the next integer. + * If we did that, we'd introduce a noticeable bias towards larger values. + * Instead, this code is arranged so that 0.5 will be rounded up or down at + * alternate pixel locations (a simple ordered dither pattern). + */ + +METHODDEF(void) +h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int outrow; + JDIMENSION outcol; + JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + register JSAMPROW inptr, outptr; + register int bias; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * 2); + + for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { + outptr = output_data[outrow]; + inptr = input_data[outrow]; + bias = 0; /* bias = 0,1,0,1,... for successive samples */ + for (outcol = 0; outcol < output_cols; outcol++) { + *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1]) + + bias) >> 1); + bias ^= 1; /* 0=>1, 1=>0 */ + inptr += 2; + } + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the standard case of 2:1 horizontal and 2:1 vertical, + * without smoothing. + */ + +METHODDEF(void) +h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow; + JDIMENSION outcol; + JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + register JSAMPROW inptr0, inptr1, outptr; + register int bias; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * 2); + + inrow = 0; + for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { + outptr = output_data[outrow]; + inptr0 = input_data[inrow]; + inptr1 = input_data[inrow+1]; + bias = 1; /* bias = 1,2,1,2,... for successive samples */ + for (outcol = 0; outcol < output_cols; outcol++) { + *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]) + + bias) >> 2); + bias ^= 3; /* 1=>2, 2=>1 */ + inptr0 += 2; inptr1 += 2; + } + inrow += 2; + } +} + + +#ifdef INPUT_SMOOTHING_SUPPORTED + +/* + * Downsample pixel values of a single component. + * This version handles the standard case of 2:1 horizontal and 2:1 vertical, + * with smoothing. One row of context is required. + */ + +METHODDEF(void) +h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow; + JDIMENSION colctr; + JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr; + INT32 membersum, neighsum, memberscale, neighscale; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, + cinfo->image_width, output_cols * 2); + + /* We don't bother to form the individual "smoothed" input pixel values; + * we can directly compute the output which is the average of the four + * smoothed values. Each of the four member pixels contributes a fraction + * (1-8*SF) to its own smoothed image and a fraction SF to each of the three + * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final + * output. The four corner-adjacent neighbor pixels contribute a fraction + * SF to just one smoothed pixel, or SF/4 to the final output; while the + * eight edge-adjacent neighbors contribute SF to each of two smoothed + * pixels, or SF/2 overall. In order to use integer arithmetic, these + * factors are scaled by 2^16 = 65536. + * Also recall that SF = smoothing_factor / 1024. + */ + + memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */ + neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */ + + inrow = 0; + for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { + outptr = output_data[outrow]; + inptr0 = input_data[inrow]; + inptr1 = input_data[inrow+1]; + above_ptr = input_data[inrow-1]; + below_ptr = input_data[inrow+2]; + + /* Special case for first column: pretend column -1 is same as column 0 */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]); + neighsum += neighsum; + neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]); + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; + + for (colctr = output_cols - 2; colctr > 0; colctr--) { + /* sum of pixels directly mapped to this output element */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + /* sum of edge-neighbor pixels */ + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) + + GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]); + /* The edge-neighbors count twice as much as corner-neighbors */ + neighsum += neighsum; + /* Add in the corner-neighbors */ + neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) + + GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]); + /* form final output scaled up by 2^16 */ + membersum = membersum * memberscale + neighsum * neighscale; + /* round, descale and output it */ + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; + } + + /* Special case for last column */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]); + neighsum += neighsum; + neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]); + membersum = membersum * memberscale + neighsum * neighscale; + *outptr = (JSAMPLE) ((membersum + 32768) >> 16); + + inrow += 2; + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the special case of a full-size component, + * with smoothing. One row of context is required. + */ + +METHODDEF(void) +fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int outrow; + JDIMENSION colctr; + JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE; + register JSAMPROW inptr, above_ptr, below_ptr, outptr; + INT32 membersum, neighsum, memberscale, neighscale; + int colsum, lastcolsum, nextcolsum; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, + cinfo->image_width, output_cols); + + /* Each of the eight neighbor pixels contributes a fraction SF to the + * smoothed pixel, while the main pixel contributes (1-8*SF). In order + * to use integer arithmetic, these factors are multiplied by 2^16 = 65536. + * Also recall that SF = smoothing_factor / 1024. + */ + + memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */ + neighscale = cinfo->smoothing_factor * 64; /* scaled SF */ + + for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) { + outptr = output_data[outrow]; + inptr = input_data[outrow]; + above_ptr = input_data[outrow-1]; + below_ptr = input_data[outrow+1]; + + /* Special case for first column */ + colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) + + GETJSAMPLE(*inptr); + membersum = GETJSAMPLE(*inptr++); + nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + + GETJSAMPLE(*inptr); + neighsum = colsum + (colsum - membersum) + nextcolsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + lastcolsum = colsum; colsum = nextcolsum; + + for (colctr = output_cols - 2; colctr > 0; colctr--) { + membersum = GETJSAMPLE(*inptr++); + above_ptr++; below_ptr++; + nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + + GETJSAMPLE(*inptr); + neighsum = lastcolsum + (colsum - membersum) + nextcolsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + lastcolsum = colsum; colsum = nextcolsum; + } + + /* Special case for last column */ + membersum = GETJSAMPLE(*inptr); + neighsum = lastcolsum + (colsum - membersum) + colsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr = (JSAMPLE) ((membersum + 32768) >> 16); + + } +} + +#endif /* INPUT_SMOOTHING_SUPPORTED */ + + +/* + * Module initialization routine for downsampling. + * Note that we must select a routine for each component. + */ + +GLOBAL(void) +jinit_downsampler (j_compress_ptr cinfo) +{ + my_downsample_ptr downsample; + int ci; + jpeg_component_info * compptr; + boolean smoothok = TRUE; + + downsample = (my_downsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_downsampler)); + cinfo->downsample = (struct jpeg_downsampler *) downsample; + downsample->pub.start_pass = start_pass_downsample; + downsample->pub.downsample = sep_downsample; + downsample->pub.need_context_rows = FALSE; + + if (cinfo->CCIR601_sampling) + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* Verify we can handle the sampling factors, and set up method pointers */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor == cinfo->max_h_samp_factor && + compptr->v_samp_factor == cinfo->max_v_samp_factor) { +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor) { + downsample->methods[ci] = fullsize_smooth_downsample; + downsample->pub.need_context_rows = TRUE; + } else +#endif + downsample->methods[ci] = fullsize_downsample; + } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor && + compptr->v_samp_factor == cinfo->max_v_samp_factor) { + smoothok = FALSE; + downsample->methods[ci] = h2v1_downsample; + } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor && + compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) { +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor) { + downsample->methods[ci] = h2v2_smooth_downsample; + downsample->pub.need_context_rows = TRUE; + } else +#endif + downsample->methods[ci] = h2v2_downsample; + } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 && + (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) { + smoothok = FALSE; + downsample->methods[ci] = int_downsample; + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + } + +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor && !smoothok) + TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL); +#endif +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jctrans.c b/third_party/libjpeg/fpdfapi_jctrans.c new file mode 100644 index 0000000000..40d166736b --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jctrans.c @@ -0,0 +1,391 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jctrans.c + * + * Copyright (C) 1995-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding compression, + * that is, writing raw DCT coefficient arrays to an output JPEG file. + * The routines in jcapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(void) transencode_master_selection + JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); +LOCAL(void) transencode_coef_controller + JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); + + +/* + * Compression initialization for writing raw-coefficient data. + * Before calling this, all parameters and a data destination must be set up. + * Call jpeg_finish_compress() to actually write the data. + * + * The number of passed virtual arrays must match cinfo->num_components. + * Note that the virtual arrays need not be filled or even realized at + * the time write_coefficients is called; indeed, if the virtual arrays + * were requested from this compression object's memory manager, they + * typically will be realized during this routine and filled afterwards. + */ + +GLOBAL(void) +jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Mark all tables to be written */ + jpeg_suppress_tables(cinfo, FALSE); + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Perform master selection of active modules */ + transencode_master_selection(cinfo, coef_arrays); + /* Wait for jpeg_finish_compress() call */ + cinfo->next_scanline = 0; /* so jpeg_write_marker works */ + cinfo->global_state = CSTATE_WRCOEFS; +} + + +/* + * Initialize the compression object with default parameters, + * then copy from the source object all parameters needed for lossless + * transcoding. Parameters that can be varied without loss (such as + * scan script and Huffman optimization) are left in their default states. + */ + +GLOBAL(void) +jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo) +{ + JQUANT_TBL ** qtblptr; + jpeg_component_info *incomp, *outcomp; + JQUANT_TBL *c_quant, *slot_quant; + int tblno, ci, coefi; + + /* Safety check to ensure start_compress not called yet. */ + if (dstinfo->global_state != CSTATE_START) + ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state); + /* Copy fundamental image dimensions */ + dstinfo->image_width = srcinfo->image_width; + dstinfo->image_height = srcinfo->image_height; + dstinfo->input_components = srcinfo->num_components; + dstinfo->in_color_space = srcinfo->jpeg_color_space; + /* Initialize all parameters to default values */ + jpeg_set_defaults(dstinfo); + /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB. + * Fix it to get the right header markers for the image colorspace. + */ + jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space); + dstinfo->data_precision = srcinfo->data_precision; + dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling; + /* Copy the source's quantization tables. */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (srcinfo->quant_tbl_ptrs[tblno] != NULL) { + qtblptr = & dstinfo->quant_tbl_ptrs[tblno]; + if (*qtblptr == NULL) + *qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo); + MEMCOPY((*qtblptr)->quantval, + srcinfo->quant_tbl_ptrs[tblno]->quantval, + SIZEOF((*qtblptr)->quantval)); + (*qtblptr)->sent_table = FALSE; + } + } + /* Copy the source's per-component info. + * Note we assume jpeg_set_defaults has allocated the dest comp_info array. + */ + dstinfo->num_components = srcinfo->num_components; + if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS) + ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components, + MAX_COMPONENTS); + for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info; + ci < dstinfo->num_components; ci++, incomp++, outcomp++) { + outcomp->component_id = incomp->component_id; + outcomp->h_samp_factor = incomp->h_samp_factor; + outcomp->v_samp_factor = incomp->v_samp_factor; + outcomp->quant_tbl_no = incomp->quant_tbl_no; + /* Make sure saved quantization table for component matches the qtable + * slot. If not, the input file re-used this qtable slot. + * IJG encoder currently cannot duplicate this. + */ + tblno = outcomp->quant_tbl_no; + if (tblno < 0 || tblno >= NUM_QUANT_TBLS || + srcinfo->quant_tbl_ptrs[tblno] == NULL) + ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno); + slot_quant = srcinfo->quant_tbl_ptrs[tblno]; + c_quant = incomp->quant_table; + if (c_quant != NULL) { + for (coefi = 0; coefi < DCTSIZE2; coefi++) { + if (c_quant->quantval[coefi] != slot_quant->quantval[coefi]) + ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno); + } + } + /* Note: we do not copy the source's Huffman table assignments; + * instead we rely on jpeg_set_colorspace to have made a suitable choice. + */ + } + /* Also copy JFIF version and resolution information, if available. + * Strictly speaking this isn't "critical" info, but it's nearly + * always appropriate to copy it if available. In particular, + * if the application chooses to copy JFIF 1.02 extension markers from + * the source file, we need to copy the version to make sure we don't + * emit a file that has 1.02 extensions but a claimed version of 1.01. + * We will *not*, however, copy version info from mislabeled "2.01" files. + */ + if (srcinfo->saw_JFIF_marker) { + if (srcinfo->JFIF_major_version == 1) { + dstinfo->JFIF_major_version = srcinfo->JFIF_major_version; + dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version; + } + dstinfo->density_unit = srcinfo->density_unit; + dstinfo->X_density = srcinfo->X_density; + dstinfo->Y_density = srcinfo->Y_density; + } +} + + +/* + * Master selection of compression modules for transcoding. + * This substitutes for jcinit.c's initialization of the full compressor. + */ + +LOCAL(void) +transencode_master_selection (j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays) +{ + /* Although we don't actually use input_components for transcoding, + * jcmaster.c's initial_setup will complain if input_components is 0. + */ + cinfo->input_components = 1; + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, TRUE /* transcode only */); + + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) { + ERREXIT(cinfo, JERR_ARITH_NOTIMPL); + } else { + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + jinit_phuff_encoder(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else + jinit_huff_encoder(cinfo); + } + + /* We need a special coefficient buffer controller. */ + transencode_coef_controller(cinfo, coef_arrays); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI, JFIF) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} + + +/* + * The rest of this file is a special implementation of the coefficient + * buffer controller. This is similar to jccoefct.c, but it handles only + * output from presupplied virtual arrays. Furthermore, we generate any + * dummy padding blocks on-the-fly rather than expecting them to be present + * in the arrays. + */ + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_coef_controller pub; /* public fields */ + + JDIMENSION iMCU_row_num; /* iMCU row # within image */ + JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* Virtual block array for each component. */ + jvirt_barray_ptr * whole_image; + + /* Workspace for constructing dummy blocks at right/bottom edges. */ + JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU]; +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + + +LOCAL(void) +start_iMCU_row (j_compress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->mcu_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + if (pass_mode != JBUF_CRANK_DEST) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + coef->iMCU_row_num = 0; + start_iMCU_row(cinfo); +} + + +/* + * Process some data. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the scan. + * The data is obtained from the virtual arrays and fed to the entropy coder. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf is ignored; it is likely to be a NULL pointer. + */ + +METHODDEF(boolean) +compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, blockcnt; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (coef->iMCU_row_num < last_iMCU_row || + yindex+yoffset < compptr->last_row_height) { + /* Fill in pointers to real blocks in this row */ + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < blockcnt; xindex++) + MCU_buffer[blkn++] = buffer_ptr++; + } else { + /* At bottom of image, need a whole row of dummy blocks */ + xindex = 0; + } + /* Fill in any dummy blocks needed in this row. + * Dummy blocks are filled in the same way as in jccoefct.c: + * all zeroes in the AC entries, DC entries equal to previous + * block's DC value. The init routine has already zeroed the + * AC entries, so we need only set the DC entries correctly. + */ + for (; xindex < compptr->MCU_width; xindex++) { + MCU_buffer[blkn] = coef->dummy_buffer[blkn]; + MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0]; + blkn++; + } + } + } + /* Try to write the MCU. */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + + +/* + * Initialize coefficient buffer controller. + * + * Each passed coefficient array must be the right size for that + * coefficient: width_in_blocks wide and height_in_blocks high, + * with unitheight at least v_samp_factor. + */ + +LOCAL(void) +transencode_coef_controller (j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays) +{ + my_coef_ptr coef; + JBLOCKROW buffer; + int i; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_c_coef_controller *) coef; + coef->pub.start_pass = start_pass_coef; + coef->pub.compress_data = compress_output; + + /* Save pointer to virtual arrays */ + coef->whole_image = coef_arrays; + + /* Allocate and pre-zero space for dummy DCT blocks. */ + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { + coef->dummy_buffer[i] = buffer + i; + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdapimin.c b/third_party/libjpeg/fpdfapi_jdapimin.c new file mode 100644 index 0000000000..80c52cd29f --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdapimin.c @@ -0,0 +1,398 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdapimin.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-decompression case or the + * transcoding-only case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jdapistd.c. But also see jcomapi.c for routines + * shared by compression and decompression, and jdtrans.c for the transcoding + * case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG decompression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL(void) +jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize) +{ + int i; + + /* Guard against version mismatches between library and caller. */ + cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ + if (version != JPEG_LIB_VERSION) + ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); + if (structsize != SIZEOF(struct jpeg_decompress_struct)) + ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, + (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize); + + /* For debugging purposes, we zero the whole master structure. + * But the application has already set the err pointer, and may have set + * client_data, so we have to save and restore those fields. + * Note: if application hasn't set client_data, tools like Purify may + * complain here. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + void * client_data = cinfo->client_data; /* ignore Purify complaint here */ + MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); + cinfo->err = err; + cinfo->client_data = client_data; + } + cinfo->is_decompressor = TRUE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->src = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) + cinfo->quant_tbl_ptrs[i] = NULL; + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + /* Initialize marker processor so application can override methods + * for COM, APPn markers before calling jpeg_read_header. + */ + cinfo->marker_list = NULL; + jinit_marker_reader(cinfo); + + /* And initialize the overall input controller. */ + jinit_input_controller(cinfo); + + /* OK, I'm ready */ + cinfo->global_state = DSTATE_START; +} + + +/* + * Destruction of a JPEG decompression object + */ + +GLOBAL(void) +jpeg_destroy_decompress (j_decompress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG decompression operation, + * but don't destroy the object itself. + */ + +GLOBAL(void) +jpeg_abort_decompress (j_decompress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Set default decompression parameters. + */ + +LOCAL(void) +default_decompress_parms (j_decompress_ptr cinfo) +{ + /* Guess the input colorspace, and set output colorspace accordingly. */ + /* (Wish JPEG committee had provided a real way to specify this...) */ + /* Note application may override our guesses. */ + switch (cinfo->num_components) { + case 1: + cinfo->jpeg_color_space = JCS_GRAYSCALE; + cinfo->out_color_space = JCS_GRAYSCALE; + break; + + case 3: + if (cinfo->saw_JFIF_marker) { + cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ + } else if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_RGB; + break; + case 1: + cinfo->jpeg_color_space = JCS_YCbCr; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + break; + } + } else { + /* Saw no special markers, try to guess from the component IDs */ + int cid0 = cinfo->comp_info[0].component_id; + int cid1 = cinfo->comp_info[1].component_id; + int cid2 = cinfo->comp_info[2].component_id; + + if (cid0 == 1 && cid1 == 2 && cid2 == 3) + cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ + else if (cid0 == 82 && cid1 == 71 && cid2 == 66) + cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ + else { + TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + } + } + /* Always guess RGB is proper output colorspace. */ + cinfo->out_color_space = JCS_RGB; + break; + + case 4: + if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_CMYK; + break; + case 2: + cinfo->jpeg_color_space = JCS_YCCK; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ + break; + } + } else { + /* No special markers, assume straight CMYK. */ + cinfo->jpeg_color_space = JCS_CMYK; + } + cinfo->out_color_space = JCS_CMYK; + break; + + default: + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->out_color_space = JCS_UNKNOWN; + break; + } + + /* Set defaults for other decompression parameters. */ + cinfo->scale_num = 1; /* 1:1 scaling */ + cinfo->scale_denom = 1; + cinfo->output_gamma = 1.0; + cinfo->buffered_image = FALSE; + cinfo->raw_data_out = FALSE; + cinfo->dct_method = JDCT_DEFAULT; + cinfo->do_fancy_upsampling = TRUE; + cinfo->do_block_smoothing = TRUE; + cinfo->quantize_colors = FALSE; + /* We set these in case application only sets quantize_colors. */ + cinfo->dither_mode = JDITHER_FS; +#ifdef QUANT_2PASS_SUPPORTED + cinfo->two_pass_quantize = TRUE; +#else + cinfo->two_pass_quantize = FALSE; +#endif + cinfo->desired_number_of_colors = 256; + cinfo->colormap = NULL; + /* Initialize for no mode change in buffered-image mode. */ + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; +} + + +/* + * Decompression startup: read start of JPEG datastream to see what's there. + * Need only initialize JPEG object and supply a data source before calling. + * + * This routine will read as far as the first SOS marker (ie, actual start of + * compressed data), and will save all tables and parameters in the JPEG + * object. It will also initialize the decompression parameters to default + * values, and finally return JPEG_HEADER_OK. On return, the application may + * adjust the decompression parameters and then call jpeg_start_decompress. + * (Or, if the application only wanted to determine the image parameters, + * the data need not be decompressed. In that case, call jpeg_abort or + * jpeg_destroy to release any temporary space.) + * If an abbreviated (tables only) datastream is presented, the routine will + * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then + * re-use the JPEG object to read the abbreviated image datastream(s). + * It is unnecessary (but OK) to call jpeg_abort in this case. + * The JPEG_SUSPENDED return code only occurs if the data source module + * requests suspension of the decompressor. In this case the application + * should load more source data and then re-call jpeg_read_header to resume + * processing. + * If a non-suspending data source is used and require_image is TRUE, then the + * return code need not be inspected since only JPEG_HEADER_OK is possible. + * + * This routine is now just a front end to jpeg_consume_input, with some + * extra error checking. + */ + +GLOBAL(int) +jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) +{ + int retcode; + + if (cinfo->global_state != DSTATE_START && + cinfo->global_state != DSTATE_INHEADER) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + retcode = jpeg_consume_input(cinfo); + + switch (retcode) { + case JPEG_REACHED_SOS: + retcode = JPEG_HEADER_OK; + break; + case JPEG_REACHED_EOI: + if (require_image) /* Complain if application wanted an image */ + ERREXIT(cinfo, JERR_NO_IMAGE); + /* Reset to start state; it would be safer to require the application to + * call jpeg_abort, but we can't change it now for compatibility reasons. + * A side effect is to free any temporary memory (there shouldn't be any). + */ + jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ + retcode = JPEG_HEADER_TABLES_ONLY; + break; + case JPEG_SUSPENDED: + /* no work */ + break; + } + + return retcode; +} + + +/* + * Consume data in advance of what the decompressor requires. + * This can be called at any time once the decompressor object has + * been created and a data source has been set up. + * + * This routine is essentially a state machine that handles a couple + * of critical state-transition actions, namely initial setup and + * transition from header scanning to ready-for-start_decompress. + * All the actual input is done via the input controller's consume_input + * method. + */ + +GLOBAL(int) +jpeg_consume_input (j_decompress_ptr cinfo) +{ + int retcode = JPEG_SUSPENDED; + + /* NB: every possible DSTATE value should be listed in this switch */ + switch (cinfo->global_state) { + case DSTATE_START: + /* Start-of-datastream actions: reset appropriate modules */ + (*cinfo->inputctl->reset_input_controller) (cinfo); + /* Initialize application's data source module */ + (*cinfo->src->init_source) (cinfo); + cinfo->global_state = DSTATE_INHEADER; + /*FALLTHROUGH*/ + case DSTATE_INHEADER: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ + /* Set up default parameters based on header data */ + default_decompress_parms(cinfo); + /* Set global state: ready for start_decompress */ + cinfo->global_state = DSTATE_READY; + } + break; + case DSTATE_READY: + /* Can't advance past first SOS until start_decompress is called */ + retcode = JPEG_REACHED_SOS; + break; + case DSTATE_PRELOAD: + case DSTATE_PRESCAN: + case DSTATE_SCANNING: + case DSTATE_RAW_OK: + case DSTATE_BUFIMAGE: + case DSTATE_BUFPOST: + case DSTATE_STOPPING: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + break; + default: + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + return retcode; +} + + +/* + * Have we finished reading the input file? + */ + +GLOBAL(boolean) +jpeg_input_complete (j_decompress_ptr cinfo) +{ + /* Check for valid jpeg object */ + if (cinfo->global_state < DSTATE_START || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->eoi_reached; +} + + +/* + * Is there more than one scan? + */ + +GLOBAL(boolean) +jpeg_has_multiple_scans (j_decompress_ptr cinfo) +{ + /* Only valid after jpeg_read_header completes */ + if (cinfo->global_state < DSTATE_READY || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->has_multiple_scans; +} + + +/* + * Finish JPEG decompression. + * + * This will normally just verify the file trailer and release temp storage. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_finish_decompress (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { + /* Terminate final pass of non-buffered mode */ + if (cinfo->output_scanline < cinfo->output_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state == DSTATE_BUFIMAGE) { + /* Finishing after a buffered-image operation */ + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state != DSTATE_STOPPING) { + /* STOPPING = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read until EOI */ + while (! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + /* Do final cleanup */ + (*cinfo->src->term_source) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); + return TRUE; +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdapistd.c b/third_party/libjpeg/fpdfapi_jdapistd.c new file mode 100644 index 0000000000..4c31f7640c --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdapistd.c @@ -0,0 +1,279 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdapistd.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-decompression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_decompress, it will end up linking in the entire decompressor. + * We thus must separate this file from jdapimin.c to avoid linking the + * whole decompression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); + + +/* + * Decompression initialization. + * jpeg_read_header must be completed before calling this. + * + * If a multipass operating mode was selected, this will do all but the + * last pass, and thus may take a great deal of time. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_start_decompress (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize master control, select active modules */ + jinit_master_decompress(cinfo); + if (cinfo->buffered_image) { + /* No more work here; expecting jpeg_start_output next */ + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; + } + cinfo->global_state = DSTATE_PRELOAD; + } + if (cinfo->global_state == DSTATE_PRELOAD) { + /* If file has multiple scans, absorb them all into the coef buffer */ + if (cinfo->inputctl->has_multiple_scans) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return FALSE; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* jdmaster underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + } + cinfo->output_scan_number = cinfo->input_scan_number; + } else if (cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any dummy output passes, and set up for the final pass */ + return output_pass_setup(cinfo); +} + + +/* + * Set up for an output pass, and perform any dummy pass(es) needed. + * Common subroutine for jpeg_start_decompress and jpeg_start_output. + * Entry: global_state = DSTATE_PRESCAN only if previously suspended. + * Exit: If done, returns TRUE and sets global_state for proper output mode. + * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. + */ + +LOCAL(boolean) +output_pass_setup (j_decompress_ptr cinfo) +{ + if (cinfo->global_state != DSTATE_PRESCAN) { + /* First call: do pass setup */ + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; + cinfo->global_state = DSTATE_PRESCAN; + } + /* Loop over any required dummy passes */ + while (cinfo->master->is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Crank through the dummy pass */ + while (cinfo->output_scanline < cinfo->output_height) { + JDIMENSION last_scanline; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* Process some data */ + last_scanline = cinfo->output_scanline; + (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, + &cinfo->output_scanline, (JDIMENSION) 0); + if (cinfo->output_scanline == last_scanline) + return FALSE; /* No progress made, must suspend */ + } + /* Finish up dummy pass, and set up for another one */ + (*cinfo->master->finish_output_pass) (cinfo); + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } + /* Ready for application to drive output pass through + * jpeg_read_scanlines or jpeg_read_raw_data. + */ + cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; + return TRUE; +} + + +/* + * Read some scanlines of data from the JPEG decompressor. + * + * The return value will be the number of lines actually read. + * This may be less than the number requested in several cases, + * including bottom of image, data source suspension, and operating + * modes that emit multiple scanlines at a time. + * + * Note: we warn about excess calls to jpeg_read_scanlines() since + * this likely signals an application programmer error. However, + * an oversize buffer (max_lines > scanlines remaining) is not an error. + */ + +GLOBAL(JDIMENSION) +jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION max_lines) +{ + JDIMENSION row_ctr; + + if (cinfo->global_state != DSTATE_SCANNING) + return 0; /* XYQ 2010-6-27: don't throw exception here */ +/* ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); */ + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Process some data */ + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); + cinfo->output_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to read raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL(JDIMENSION) +jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION max_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != DSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Verify that at least one iMCU row can be returned. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size; + if (max_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Decompress directly into user's buffer. */ + if (! (*cinfo->coef->decompress_data) (cinfo, data)) + return 0; /* suspension forced, can do nothing more */ + + /* OK, we processed one iMCU row. */ + cinfo->output_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} + + +/* Additional entry points for buffered-image mode. */ + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Initialize for an output pass in buffered-image mode. + */ + +GLOBAL(boolean) +jpeg_start_output (j_decompress_ptr cinfo, int scan_number) +{ + if (cinfo->global_state != DSTATE_BUFIMAGE && + cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Limit scan number to valid range */ + if (scan_number <= 0) + scan_number = 1; + if (cinfo->inputctl->eoi_reached && + scan_number > cinfo->input_scan_number) + scan_number = cinfo->input_scan_number; + cinfo->output_scan_number = scan_number; + /* Perform any dummy output passes, and set up for the real pass */ + return output_pass_setup(cinfo); +} + + +/* + * Finish up after an output pass in buffered-image mode. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_finish_output (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { + /* Terminate this pass. */ + /* We do not require the whole pass to have been completed. */ + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_BUFPOST; + } else if (cinfo->global_state != DSTATE_BUFPOST) { + /* BUFPOST = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read markers looking for SOS or EOI */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdcoefct.c b/third_party/libjpeg/fpdfapi_jdcoefct.c new file mode 100644 index 0000000000..099833a8d6 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdcoefct.c @@ -0,0 +1,739 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdcoefct.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for decompression. + * This controller is the top level of the JPEG decompressor proper. + * The coefficient buffer lies between entropy decoding and inverse-DCT steps. + * + * In buffered-image mode, this controller is the interface between + * input-oriented processing and output-oriented processing. + * Also, the input side (only) is used when reading a file for transcoding. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* Block smoothing is only applicable for progressive JPEG, so: */ +#ifndef D_PROGRESSIVE_SUPPORTED +#undef BLOCK_SMOOTHING_SUPPORTED +#endif + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_coef_controller pub; /* public fields */ + + /* These variables keep track of the current location of the input side. */ + /* cinfo->input_iMCU_row is also used for this. */ + JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* The output side's location is represented by cinfo->output_iMCU_row. */ + + /* In single-pass modes, it's sufficient to buffer just one MCU. + * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, + * and let the entropy decoder write into that workspace each time. + * (On 80x86, the workspace is FAR even though it's not really very big; + * this is to keep the module interfaces unchanged when a large coefficient + * buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays; it is used only by the input side. + */ + JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +#endif + +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* When doing block smoothing, we latch coefficient Al values here */ + int * coef_bits_latch; +#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ +#endif +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + +/* Forward declarations */ +METHODDEF(int) decompress_onepass + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#ifdef D_MULTISCAN_FILES_SUPPORTED +METHODDEF(int) decompress_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif +#ifdef BLOCK_SMOOTHING_SUPPORTED +LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo)); +METHODDEF(int) decompress_smooth_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif + + +LOCAL(void) +start_iMCU_row (j_decompress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row (input side) */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->MCU_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for an input processing pass. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + cinfo->input_iMCU_row = 0; + start_iMCU_row(cinfo); +} + + +/* + * Initialize for an output processing pass. + */ + +METHODDEF(void) +start_output_pass (j_decompress_ptr cinfo) +{ +#ifdef BLOCK_SMOOTHING_SUPPORTED + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* If multipass, check to see whether to use block smoothing on this pass */ + if (coef->pub.coef_arrays != NULL) { + if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) + coef->pub.decompress_data = decompress_smooth_data; + else + coef->pub.decompress_data = decompress_data; + } +#endif + cinfo->output_iMCU_row = 0; +} + + +/* + * Decompress and return some data in the single-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Input and output must run in lockstep since we have only a one-MCU buffer. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image, + * which we index according to the component's SOF position. + */ + +METHODDEF(int) +decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, useful_width; + JSAMPARRAY output_ptr; + JDIMENSION start_col, output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Loop to process as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ + jzero_far((void FAR *) coef->MCU_buffer[0], + (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + /* Determine where data should go in output_buf and do the IDCT thing. + * We skip dummy blocks at the right and bottom edges (but blkn gets + * incremented past them!). Note the inner loop relies on having + * allocated the MCU_buffer[] blocks sequentially. + */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) { + blkn += compptr->MCU_blocks; + continue; + } + inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; + useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + output_ptr = output_buf[compptr->component_index] + + yoffset * compptr->DCT_scaled_size; + start_col = MCU_col_num * compptr->MCU_sample_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (cinfo->input_iMCU_row < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + output_col = start_col; + for (xindex = 0; xindex < useful_width; xindex++) { + (*inverse_DCT) (cinfo, compptr, + (JCOEFPTR) coef->MCU_buffer[blkn+xindex], + output_ptr, output_col); + output_col += compptr->DCT_scaled_size; + } + } + blkn += compptr->MCU_width; + output_ptr += compptr->DCT_scaled_size; + } + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + cinfo->output_iMCU_row++; + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Dummy consume-input routine for single-pass operation. + */ + +METHODDEF(int) +dummy_consume_data (j_decompress_ptr cinfo) +{ + return JPEG_SUSPENDED; /* Always indicate nothing was done */ +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Consume input data and store it in the full-image coefficient buffer. + * We read as much as one fully interleaved MCU row ("iMCU" row) per call, + * ie, v_samp_factor block rows for each component in the scan. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + */ + +METHODDEF(int) +consume_data (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + cinfo->input_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Note: entropy decoder expects buffer to be zeroed, + * but this is handled automatically by the memory manager + * because we requested a pre-zeroed array. + */ + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to fetch the MCU. */ + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Decompress and return some data in the multi-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image. + */ + +METHODDEF(int) +decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num; + int ci, block_row, block_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number < cinfo->output_scan_number || + (cinfo->input_scan_number == cinfo->output_scan_number && + cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + cinfo->output_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + output_col = 0; + for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) { + (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, + output_ptr, output_col); + buffer_ptr++; + output_col += compptr->DCT_scaled_size; + } + output_ptr += compptr->DCT_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +#ifdef BLOCK_SMOOTHING_SUPPORTED + +/* + * This code applies interblock smoothing as described by section K.8 + * of the JPEG standard: the first 5 AC coefficients are estimated from + * the DC values of a DCT block and its 8 neighboring blocks. + * We apply smoothing only for progressive JPEG decoding, and only if + * the coefficients it can estimate are not yet known to full precision. + */ + +/* Natural-order array positions of the first 5 zigzag-order coefficients */ +#define Q01_POS 1 +#define Q10_POS 8 +#define Q20_POS 16 +#define Q11_POS 9 +#define Q02_POS 2 + +/* + * Determine whether block smoothing is applicable and safe. + * We also latch the current states of the coef_bits[] entries for the + * AC coefficients; otherwise, if the input side of the decompressor + * advances into a new scan, we might think the coefficients are known + * more accurately than they really are. + */ + +LOCAL(boolean) +smoothing_ok (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + boolean smoothing_useful = FALSE; + int ci, coefi; + jpeg_component_info *compptr; + JQUANT_TBL * qtable; + int * coef_bits; + int * coef_bits_latch; + + if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) + return FALSE; + + /* Allocate latch area if not already done */ + if (coef->coef_bits_latch == NULL) + coef->coef_bits_latch = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * + (SAVED_COEFS * SIZEOF(int))); + coef_bits_latch = coef->coef_bits_latch; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* All components' quantization values must already be latched. */ + if ((qtable = compptr->quant_table) == NULL) + return FALSE; + /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ + if (qtable->quantval[0] == 0 || + qtable->quantval[Q01_POS] == 0 || + qtable->quantval[Q10_POS] == 0 || + qtable->quantval[Q20_POS] == 0 || + qtable->quantval[Q11_POS] == 0 || + qtable->quantval[Q02_POS] == 0) + return FALSE; + /* DC values must be at least partly known for all components. */ + coef_bits = cinfo->coef_bits[ci]; + if (coef_bits[0] < 0) + return FALSE; + /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ + for (coefi = 1; coefi <= 5; coefi++) { + coef_bits_latch[coefi] = coef_bits[coefi]; + if (coef_bits[coefi] != 0) + smoothing_useful = TRUE; + } + coef_bits_latch += SAVED_COEFS; + } + + return smoothing_useful; +} + + +/* + * Variant of decompress_data for use when doing block smoothing. + */ + +METHODDEF(int) +decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num, last_block_column; + int ci, block_row, block_rows, access_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr, prev_block_row, next_block_row; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + boolean first_row, last_row; + JBLOCK workspace; + int *coef_bits; + JQUANT_TBL *quanttbl; + INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; + int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; + int Al, pred; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if (cinfo->input_scan_number == cinfo->output_scan_number) { + /* If input is working on current scan, we ordinarily want it to + * have completed the current row. But if input scan is DC, + * we want it to keep one row ahead so that next block row's DC + * values are up to date. + */ + JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; + if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) + break; + } + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) { + block_rows = compptr->v_samp_factor; + access_rows = block_rows * 2; /* this and next iMCU row */ + last_row = FALSE; + } else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + access_rows = block_rows; /* this iMCU row only */ + last_row = TRUE; + } + /* Align the virtual buffer for this component. */ + if (cinfo->output_iMCU_row > 0) { + access_rows += compptr->v_samp_factor; /* prior iMCU row too */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, + (JDIMENSION) access_rows, FALSE); + buffer += compptr->v_samp_factor; /* point to current iMCU row */ + first_row = FALSE; + } else { + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); + first_row = TRUE; + } + /* Fetch component-dependent info */ + coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); + quanttbl = compptr->quant_table; + Q00 = quanttbl->quantval[0]; + Q01 = quanttbl->quantval[Q01_POS]; + Q10 = quanttbl->quantval[Q10_POS]; + Q20 = quanttbl->quantval[Q20_POS]; + Q11 = quanttbl->quantval[Q11_POS]; + Q02 = quanttbl->quantval[Q02_POS]; + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + if (first_row && block_row == 0) + prev_block_row = buffer_ptr; + else + prev_block_row = buffer[block_row-1]; + if (last_row && block_row == block_rows-1) + next_block_row = buffer_ptr; + else + next_block_row = buffer[block_row+1]; + /* We fetch the surrounding DC values using a sliding-register approach. + * Initialize all nine here so as to do the right thing on narrow pics. + */ + DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; + DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; + DC7 = DC8 = DC9 = (int) next_block_row[0][0]; + output_col = 0; + last_block_column = compptr->width_in_blocks - 1; + for (block_num = 0; block_num <= last_block_column; block_num++) { + /* Fetch current DCT block into workspace so we can modify it. */ + jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); + /* Update DC values */ + if (block_num < last_block_column) { + DC3 = (int) prev_block_row[1][0]; + DC6 = (int) buffer_ptr[1][0]; + DC9 = (int) next_block_row[1][0]; + } + /* Compute coefficient estimates per K.8. + * An estimate is applied only if coefficient is still zero, + * and is not known to be fully accurate. + */ + /* AC01 */ + if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { + num = 36 * Q00 * (DC4 - DC6); + if (num >= 0) { + pred = (int) (((Q01<<7) + num) / (Q01<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + } else { + pred = (int) (((Q01<<7) - num) / (Q01<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + pred = -pred; + } + workspace[1] = (JCOEF) pred; + } + /* AC10 */ + if ((Al=coef_bits[2]) != 0 && workspace[8] == 0) { + num = 36 * Q00 * (DC2 - DC8); + if (num >= 0) { + pred = (int) (((Q10<<7) + num) / (Q10<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + } else { + pred = (int) (((Q10<<7) - num) / (Q10<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + pred = -pred; + } + workspace[8] = (JCOEF) pred; + } + /* AC20 */ + if ((Al=coef_bits[3]) != 0 && workspace[16] == 0) { + num = 9 * Q00 * (DC2 + DC8 - 2*DC5); + if (num >= 0) { + pred = (int) (((Q20<<7) + num) / (Q20<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + } else { + pred = (int) (((Q20<<7) - num) / (Q20<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + pred = -pred; + } + workspace[16] = (JCOEF) pred; + } + /* AC11 */ + if ((Al=coef_bits[4]) != 0 && workspace[9] == 0) { + num = 5 * Q00 * (DC1 - DC3 - DC7 + DC9); + if (num >= 0) { + pred = (int) (((Q11<<7) + num) / (Q11<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + } else { + pred = (int) (((Q11<<7) - num) / (Q11<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + pred = -pred; + } + workspace[9] = (JCOEF) pred; + } + /* AC02 */ + if ((Al=coef_bits[5]) != 0 && workspace[2] == 0) { + num = 9 * Q00 * (DC4 + DC6 - 2*DC5); + if (num >= 0) { + pred = (int) (((Q02<<7) + num) / (Q02<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + } else { + pred = (int) (((Q02<<7) - num) / (Q02<<8)); + if (Al > 0 && pred >= (1<<Al)) + pred = (1<<Al)-1; + pred = -pred; + } + workspace[2] = (JCOEF) pred; + } + /* OK, do the IDCT */ + (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) workspace, + output_ptr, output_col); + /* Advance for next column */ + DC1 = DC2; DC2 = DC3; + DC4 = DC5; DC5 = DC6; + DC7 = DC8; DC8 = DC9; + buffer_ptr++, prev_block_row++, next_block_row++; + output_col += compptr->DCT_scaled_size; + } + output_ptr += compptr->DCT_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* BLOCK_SMOOTHING_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL(void) +jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_d_coef_controller *) coef; + coef->pub.start_input_pass = start_input_pass; + coef->pub.start_output_pass = start_output_pass; +#ifdef BLOCK_SMOOTHING_SUPPORTED + coef->coef_bits_latch = NULL; +#endif + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + /* Note we ask for a pre-zeroed array. */ + int ci, access_rows; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + access_rows = compptr->v_samp_factor; +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* If block smoothing could be used, need a bigger window */ + if (cinfo->progressive_mode) + access_rows *= 3; +#endif + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) access_rows); + } + coef->pub.consume_data = consume_data; + coef->pub.decompress_data = decompress_data; + coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + coef->pub.consume_data = dummy_consume_data; + coef->pub.decompress_data = decompress_onepass; + coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdcolor.c b/third_party/libjpeg/fpdfapi_jdcolor.c new file mode 100644 index 0000000000..c17329b86d --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdcolor.c @@ -0,0 +1,399 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdcolor.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains output colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_deconverter pub; /* public fields */ + + /* Private state for YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ +} my_color_deconverter; + +typedef my_color_deconverter * my_cconvert_ptr; + + +/**************** YCbCr -> RGB conversion: most common case **************/ + +/* + * YCbCr is defined per CCIR 601-1, except that Cb and Cr are + * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * The conversion equations to be implemented are therefore + * R = Y + 1.40200 * Cr + * G = Y - 0.34414 * Cb - 0.71414 * Cr + * B = Y + 1.77200 * Cb + * where Cb and Cr represent the incoming values less CENTERJSAMPLE. + * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * Notice that Y, being an integral input, does not contribute any fraction + * so it need not participate in the rounding. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times Cb and Cr for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 12-bit samples it is still acceptable. It's not very reasonable for + * 16-bit samples, but if you want lossless storage you shouldn't be changing + * colorspace anyway. + * The Cr=>R and Cb=>B values can be rounded to integers in advance; the + * values for the G calculation are left scaled up, since we must add them + * together before rounding. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<<SCALEBITS) + 0.5)) + + +/* + * Initialize tables for YCC->RGB colorspace conversion. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + int i; + INT32 x; + SHIFT_TEMPS + + cconvert->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + cconvert->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.40200 * x */ + cconvert->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.77200 * x */ + cconvert->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.71414 * x */ + cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; + /* Cb=>G value is scaled-up -0.34414 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * + * Note that we change from noninterleaved, one-plane-per-component format + * to interleaved-pixel format. The output buffer is therefore three times + * as wide as the input buffer. + * A starting row offset is provided only for the input buffer. The caller + * can easily adjust the passed output_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +ycc_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses. */ + outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; + outptr[RGB_GREEN] = range_limit[y + + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS))]; + outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/**************** Cases other than YCbCr -> RGB **************/ + + +/* + * Color conversion for no colorspace change: just copy the data, + * converting from separate-planes to interleaved representation. + */ + +METHODDEF(void) +null_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW inptr, outptr; + register JDIMENSION count; + register int num_components = cinfo->num_components; + JDIMENSION num_cols = cinfo->output_width; + int ci; + + while (--num_rows >= 0) { + for (ci = 0; ci < num_components; ci++) { + inptr = input_buf[ci][input_row]; + outptr = output_buf[0] + ci; + for (count = num_cols; count > 0; count--) { + *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ + outptr += num_components; + } + } + input_row++; + output_buf++; + } +} + + +/* + * Color conversion for grayscale: just copy the data. + * This also works for YCbCr -> grayscale conversion, in which + * we just copy the Y (luminance) component and ignore chrominance. + */ + +METHODDEF(void) +grayscale_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, + num_rows, cinfo->output_width); +} + + +/* + * Convert grayscale to RGB: just duplicate the graylevel three times. + * This is provided to support applications that don't want to cope + * with grayscale as a separate case. + */ + +METHODDEF(void) +gray_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW inptr, outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr = input_buf[0][input_row++]; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Adobe-style YCCK->CMYK conversion. + * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same + * conversion as above, while passing K (black) unchanged. + * We assume build_ycc_rgb_table has been called. + */ + +METHODDEF(void) +ycck_cmyk_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2, inptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + inptr3 = input_buf[3][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses. */ + outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ + outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS)))]; + outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ + /* K passes through unchanged */ + outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ + outptr += 4; + } + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +start_pass_dcolor (j_decompress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for output colorspace conversion. + */ + +GLOBAL(void) +jinit_color_deconverter (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + int ci; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_deconverter)); + cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert; + cconvert->pub.start_pass = start_pass_dcolor; + + /* Make sure num_components agrees with jpeg_color_space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_RGB: + case JCS_YCbCr: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->num_components < 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + } + + /* Set out_color_components and conversion method based on requested space. + * Also clear the component_needed flags for any unused components, + * so that earlier pipeline stages can avoid useless computation. + */ + + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + if (cinfo->jpeg_color_space == JCS_GRAYSCALE || + cinfo->jpeg_color_space == JCS_YCbCr) { + cconvert->pub.color_convert = grayscale_convert; + /* For color->grayscale conversion, only the Y (0) component is needed */ + for (ci = 1; ci < cinfo->num_components; ci++) + cinfo->comp_info[ci].component_needed = FALSE; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + if (cinfo->jpeg_color_space == JCS_YCbCr) { + cconvert->pub.color_convert = ycc_rgb_convert; + build_ycc_rgb_table(cinfo); + } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { + cconvert->pub.color_convert = gray_rgb_convert; + } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) { + cconvert->pub.color_convert = null_convert; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_CMYK: + cinfo->out_color_components = 4; + if (cinfo->jpeg_color_space == JCS_YCCK) { + cconvert->pub.color_convert = ycck_cmyk_convert; + build_ycc_rgb_table(cinfo); + } else if (cinfo->jpeg_color_space == JCS_CMYK) { + cconvert->pub.color_convert = null_convert; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + default: + /* Permit null conversion to same output space */ + if (cinfo->out_color_space == cinfo->jpeg_color_space) { + cinfo->out_color_components = cinfo->num_components; + cconvert->pub.color_convert = null_convert; + } else /* unsupported non-null conversion */ + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + } + + if (cinfo->quantize_colors) + cinfo->output_components = 1; /* single colormapped output component */ + else + cinfo->output_components = cinfo->out_color_components; +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jddctmgr.c b/third_party/libjpeg/fpdfapi_jddctmgr.c new file mode 100644 index 0000000000..5226456414 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jddctmgr.c @@ -0,0 +1,272 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jddctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the inverse-DCT management logic. + * This code selects a particular IDCT implementation to be used, + * and it performs related housekeeping chores. No code in this file + * is executed per IDCT step, only during output pass setup. + * + * Note that the IDCT routines are responsible for performing coefficient + * dequantization as well as the IDCT proper. This module sets up the + * dequantization multiplier table needed by the IDCT routine. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* + * The decompressor input side (jdinput.c) saves away the appropriate + * quantization table for each component at the start of the first scan + * involving that component. (This is necessary in order to correctly + * decode files that reuse Q-table slots.) + * When we are ready to make an output pass, the saved Q-table is converted + * to a multiplier table that will actually be used by the IDCT routine. + * The multiplier table contents are IDCT-method-dependent. To support + * application changes in IDCT method between scans, we can remake the + * multiplier tables if necessary. + * In buffered-image mode, the first output pass may occur before any data + * has been seen for some components, and thus before their Q-tables have + * been saved away. To handle this case, multiplier tables are preset + * to zeroes; the result of the IDCT will be a neutral gray level. + */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_inverse_dct pub; /* public fields */ + + /* This array contains the IDCT method code that each multiplier table + * is currently set up for, or -1 if it's not yet set up. + * The actual multiplier tables are pointed to by dct_table in the + * per-component comp_info structures. + */ + int cur_method[MAX_COMPONENTS]; +} my_idct_controller; + +typedef my_idct_controller * my_idct_ptr; + + +/* Allocated multiplier tables: big enough for any supported variant */ + +typedef union { + ISLOW_MULT_TYPE islow_array[DCTSIZE2]; +#ifdef DCT_IFAST_SUPPORTED + IFAST_MULT_TYPE ifast_array[DCTSIZE2]; +#endif +#ifdef DCT_FLOAT_SUPPORTED + FLOAT_MULT_TYPE float_array[DCTSIZE2]; +#endif +} multiplier_table; + + +/* The current scaled-IDCT routines require ISLOW-style multiplier tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef IDCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Prepare for an output pass. + * Here we select the proper IDCT routine for each component and build + * a matching multiplier table. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + my_idct_ptr idct = (my_idct_ptr) cinfo->idct; + int ci, i; + jpeg_component_info *compptr; + int method = 0; + inverse_DCT_method_ptr method_ptr = NULL; + JQUANT_TBL * qtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper IDCT routine for this component's scaling */ + switch (compptr->DCT_scaled_size) { +#ifdef IDCT_SCALING_SUPPORTED + case 1: + method_ptr = jpeg_idct_1x1; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; + case 2: + method_ptr = jpeg_idct_2x2; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; + case 4: + method_ptr = jpeg_idct_4x4; + method = JDCT_ISLOW; /* jidctred uses islow-style table */ + break; +#endif + case DCTSIZE: + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + method_ptr = jpeg_idct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + method_ptr = jpeg_idct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + method_ptr = jpeg_idct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size); + break; + } + idct->pub.inverse_DCT[ci] = method_ptr; + /* Create multiplier table from quant table. + * However, we can skip this if the component is uninteresting + * or if we already built the table. Also, if no quant table + * has yet been saved for the component, we leave the + * multiplier table all-zero; we'll be reading zeroes from the + * coefficient controller's buffer anyway. + */ + if (! compptr->component_needed || idct->cur_method[ci] == method) + continue; + qtbl = compptr->quant_table; + if (qtbl == NULL) /* happens if no data yet for component */ + continue; + idct->cur_method[ci] = method; + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + { + /* For LL&M IDCT method, multipliers are equal to raw quantization + * coefficients, but are stored as ints to ensure access efficiency. + */ + ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i]; + } + } + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * For integer operation, the multiplier table is to be scaled by + * IFAST_SCALE_BITS. + */ + IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + for (i = 0; i < DCTSIZE2; i++) { + ifmtbl[i] = (IFAST_MULT_TYPE) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-IFAST_SCALE_BITS); + } + } + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + */ + FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fmtbl[i] = (FLOAT_MULT_TYPE) + ((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col]); + i++; + } + } + } + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize IDCT manager. + */ + +GLOBAL(void) +jinit_inverse_dct (j_decompress_ptr cinfo) +{ + my_idct_ptr idct; + int ci; + jpeg_component_info *compptr; + + idct = (my_idct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_idct_controller)); + cinfo->idct = (struct jpeg_inverse_dct *) idct; + idct->pub.start_pass = start_pass; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate and pre-zero a multiplier table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(multiplier_table)); + MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); + /* Mark multiplier table not yet set up for any method */ + idct->cur_method[ci] = -1; + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdhuff.c b/third_party/libjpeg/fpdfapi_jdhuff.c new file mode 100644 index 0000000000..dc37db58a9 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdhuff.c @@ -0,0 +1,657 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdhuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy decoding routines. + * + * Much of the complexity here has to do with supporting input suspension. + * If the data source module demands suspension, we want to be able to back + * up to the start of the current MCU. To do this, we copy state variables + * into local working storage, and update them back to the permanent + * storage only upon successful completion of an MCU. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdhuff.h" /* Declarations shared with jdphuff.c */ + +#ifdef _FX_MANAGED_CODE_ +#define savable_state savable_state_d +#endif + +/* + * Expanded entropy decoder object for Huffman decoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + /* These fields are loaded into local variables at start of each MCU. + * In case of suspension, we exit WITHOUT updating them. + */ + bitread_perm_state bitstate; /* Bit buffer at start of MCU */ + savable_state saved; /* Other state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Precalculated info set up by start_pass for use in decode_mcu: */ + + /* Pointers to derived tables to be used for each block within an MCU */ + d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + /* Whether we care about the DC and AC coefficient values for each block */ + boolean dc_needed[D_MAX_BLOCKS_IN_MCU]; + boolean ac_needed[D_MAX_BLOCKS_IN_MCU]; +} huff_entropy_decoder; + +typedef huff_entropy_decoder * huff_entropy_ptr; + + +/* + * Initialize for a Huffman-compressed scan. + */ + +METHODDEF(void) +start_pass_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, blkn, dctbl, actbl; + jpeg_component_info * compptr; + + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning because + * there are some baseline files out there with all zeroes in these bytes. + */ + if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 || + cinfo->Ah != 0 || cinfo->Al != 0) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + dctbl = compptr->dc_tbl_no; + actbl = compptr->ac_tbl_no; + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl, + & entropy->dc_derived_tbls[dctbl]); + jpeg_make_d_derived_tbl(cinfo, FALSE, actbl, + & entropy->ac_derived_tbls[actbl]); + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Precalculate decoding info for each block in an MCU of this scan */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + /* Precalculate which table to use for each block */ + entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no]; + entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no]; + /* Decide whether we really care about the coefficient values */ + if (compptr->component_needed) { + entropy->dc_needed[blkn] = TRUE; + /* we don't need the ACs if producing a 1/8th-size image */ + entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1); + } else { + entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE; + } + } + + /* Initialize bitread state variables */ + entropy->bitstate.bits_left = 0; + entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ + entropy->pub.insufficient_data = FALSE; + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + * + * Note this is also used by jdphuff.c. + */ + +GLOBAL(void) +jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno, + d_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + d_derived_tbl *dtbl; + int p, i, l, _si, numsymbols; + int lookbits, ctr; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (d_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(d_derived_tbl)); + dtbl = *pdtbl; + dtbl->pub = htbl; /* fill in back link */ + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + numsymbols = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + _si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == _si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << _si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + _si++; + } + + /* Figure F.15: generate decoding tables for bit-sequential decoding */ + + p = 0; + for (l = 1; l <= 16; l++) { + if (htbl->bits[l]) { + /* valoffset[l] = huffval[] index of 1st symbol of code length l, + * minus the minimum code of length l + */ + dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p]; + p += htbl->bits[l]; + dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ + } else { + dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ + } + } + dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ + + /* Compute lookahead tables to speed up decoding. + * First we set all the table entries to 0, indicating "too long"; + * then we iterate through the Huffman codes that are short enough and + * fill in all the entries that correspond to bit sequences starting + * with that code. + */ + + MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); + + p = 0; + for (l = 1; l <= HUFF_LOOKAHEAD; l++) { + for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { + /* l = current code's length, p = its index in huffcode[] & huffval[]. */ + /* Generate left-justified code followed by all possible bit sequences */ + lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); + for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { + dtbl->look_nbits[lookbits] = l; + dtbl->look_sym[lookbits] = htbl->huffval[p]; + lookbits++; + } + } + } + + /* Validate symbols as being reasonable. + * For AC tables, we make no check, but accept all byte values 0..255. + * For DC tables, we require the symbols to be in range 0..15. + * (Tighter bounds could be applied depending on the data depth and mode, + * but this is sufficient to ensure safe decoding.) + */ + if (isDC) { + for (i = 0; i < numsymbols; i++) { + int sym = htbl->huffval[i]; + if (sym < 0 || sym > 15) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + } + } +} + + +/* + * Out-of-line code for bit fetching (shared with jdphuff.c). + * See jdhuff.h for info about usage. + * Note: current values of get_buffer and bits_left are passed as parameters, + * but are returned in the corresponding fields of the state struct. + * + * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width + * of get_buffer to be used. (On machines with wider words, an even larger + * buffer could be used.) However, on some machines 32-bit shifts are + * quite slow and take time proportional to the number of places shifted. + * (This is true with most PC compilers, for instance.) In this case it may + * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the + * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. + */ + +#ifdef SLOW_SHIFT_32 +#define MIN_GET_BITS 15 /* minimum allowable value */ +#else +#define MIN_GET_BITS (BIT_BUF_SIZE-7) +#endif + + +GLOBAL(boolean) +jpeg_fill_bit_buffer (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + int nbits) +/* Load up the bit buffer to a depth of at least nbits */ +{ + /* Copy heavily used state fields into locals (hopefully registers) */ + register const JOCTET * next_input_byte = state->next_input_byte; + register size_t bytes_in_buffer = state->bytes_in_buffer; + j_decompress_ptr cinfo = state->cinfo; + + /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ + /* (It is assumed that no request will be for more than that many bits.) */ + /* We fail to do so only if we hit a marker or are forced to suspend. */ + + if (cinfo->unread_marker == 0) { /* cannot advance past a marker */ + while (bits_left < MIN_GET_BITS) { + register int c; + + /* Attempt to read a byte */ + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + + /* If it's 0xFF, check and discard stuffed zero byte */ + if (c == 0xFF) { + /* Loop here to discard any padding FF's on terminating marker, + * so that we can save a valid unread_marker value. NOTE: we will + * accept multiple FF's followed by a 0 as meaning a single FF data + * byte. This data pattern is not valid according to the standard. + */ + do { + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + } while (c == 0xFF); + + if (c == 0) { + /* Found FF/00, which represents an FF data byte */ + c = 0xFF; + } else { + /* Oops, it's actually a marker indicating end of compressed data. + * Save the marker code for later use. + * Fine point: it might appear that we should save the marker into + * bitread working state, not straight into permanent state. But + * once we have hit a marker, we cannot need to suspend within the + * current MCU, because we will read no more bytes from the data + * source. So it is OK to update permanent state right away. + */ + cinfo->unread_marker = c; + /* See if we need to insert some fake zero bits. */ + goto no_more_bytes; + } + } + + /* OK, load c into get_buffer */ + get_buffer = (get_buffer << 8) | c; + bits_left += 8; + } /* end while */ + } else { + no_more_bytes: + /* We get here if we've read the marker that terminates the compressed + * data segment. There should be enough bits in the buffer register + * to satisfy the request; if so, no problem. + */ + if (nbits > bits_left) { + /* Uh-oh. Report corrupted data to user and stuff zeroes into + * the data stream, so that we can produce some kind of image. + * We use a nonvolatile flag to ensure that only one warning message + * appears per data segment. + */ + if (! cinfo->entropy->insufficient_data) { + WARNMS(cinfo, JWRN_HIT_MARKER); + cinfo->entropy->insufficient_data = TRUE; + } + /* Fill the buffer with zero bits */ + get_buffer <<= MIN_GET_BITS - bits_left; + bits_left = MIN_GET_BITS; + } + } + + /* Unload the local registers */ + state->next_input_byte = next_input_byte; + state->bytes_in_buffer = bytes_in_buffer; + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + return TRUE; +} + + +/* + * Out-of-line code for Huffman code decoding. + * See jdhuff.h for info about usage. + */ + +GLOBAL(int) +jpeg_huff_decode (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + d_derived_tbl * htbl, int min_bits) +{ + register int l = min_bits; + register INT32 code; + + /* HUFF_DECODE has determined that the code is at least min_bits */ + /* bits long, so fetch that many bits in one swoop. */ + + CHECK_BIT_BUFFER(*state, l, return -1); + code = GET_BITS(l); + + /* Collect the rest of the Huffman code one bit at a time. */ + /* This is per Figure F.16 in the JPEG spec. */ + + while (code > htbl->maxcode[l]) { + code <<= 1; + CHECK_BIT_BUFFER(*state, 1, return -1); + code |= GET_BITS(1); + l++; + } + + /* Unload the local registers */ + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + /* With garbage input we may reach the sentinel value l = 17. */ + + if (l > 16) { + WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); + return 0; /* fake a zero as the safest result */ + } + + return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ]; +} + + +/* + * Figure F.12: extend sign bit. + * On some machines, a shift and add will be faster than a table lookup. + */ + +#ifdef AVOID_TABLES + +#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) + +#else + +#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) + +static const int extend_test[16] = /* entry n is 2**(n-1) */ + { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, + 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; + +static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ + { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, + ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, + ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, + ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; + +#endif /* AVOID_TABLES */ + + +/* + * Check for a restart marker & resynchronize decoder. + * Returns FALSE if must suspend. + */ + +LOCAL(boolean) +process_restart (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci; + + /* Throw away any unused bits remaining in bit buffer; */ + /* include any full bytes in next_marker's count of discarded bytes */ + cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; + entropy->bitstate.bits_left = 0; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + return FALSE; + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; + + /* Reset out-of-data flag, unless read_restart_marker left us smack up + * against a marker. In that case we will end up treating the next data + * segment as empty, and we can avoid producing bogus output pixels by + * leaving the flag set. + */ + if (cinfo->unread_marker == 0) + entropy->pub.insufficient_data = FALSE; + + return TRUE; +} + + +/* + * Decode and return one MCU's worth of Huffman-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER. + * (Wholesale zeroing is usually a little faster than retail...) + * + * Returns FALSE if data source requested suspension. In that case no + * changes have been made to permanent state. (Exception: some output + * coefficients may already have been assigned. This is harmless for + * this module, since we'll just re-assign them on the next call.) + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->pub.insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn]; + d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn]; + register int s, k, r; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + HUFF_DECODE(s, br_state, dctbl, return FALSE, label1); + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + + if (entropy->dc_needed[blkn]) { + /* Convert DC difference to actual value, update last_dc_val */ + int ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */ + (*block)[0] = (JCOEF) s; + } + + if (entropy->ac_needed[blkn]) { + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (k = 1; k < DCTSIZE2; k++) { + HUFF_DECODE(s, br_state, actbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in jpeg_natural_order[] will save us + * if k >= DCTSIZE2, which could happen if the data is corrupted. + */ + (*block)[jpeg_natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + break; + k += 15; + } + } + + } else { + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (k = 1; k < DCTSIZE2; k++) { + HUFF_DECODE(s, br_state, actbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + } + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Module initialization routine for Huffman entropy decoding. + */ + +GLOBAL(void) +jinit_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_decoder)); + cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; + entropy->pub.start_pass = start_pass_huff_decoder; + entropy->pub.decode_mcu = decode_mcu; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdinput.c b/third_party/libjpeg/fpdfapi_jdinput.c new file mode 100644 index 0000000000..6e714e928e --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdinput.c @@ -0,0 +1,384 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdinput.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input control logic for the JPEG decompressor. + * These routines are concerned with controlling the decompressor's input + * processing (marker reading and coefficient decoding). The actual input + * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_input_controller pub; /* public fields */ + + boolean inheaders; /* TRUE until first SOS is reached */ +} my_input_controller; + +typedef my_input_controller * my_inputctl_ptr; + + +/* Forward declarations */ +METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo)); + + +/* + * Routines to calculate various quantities related to the size of the image. + */ + +LOCAL(void) +initial_setup (j_decompress_ptr cinfo) +/* Called once, when first SOS marker is reached */ +{ + int ci; + jpeg_component_info *compptr; + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE. + * In the full decompressor, this will be overridden by jdmaster.c; + * but in the transcoder, jdmaster.c is not used, so we must do it here. + */ + cinfo->min_DCT_scaled_size = DCTSIZE; + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_scaled_size = DCTSIZE; + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * DCTSIZE)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * DCTSIZE)); + /* downsampled_width and downsampled_height will also be overridden by + * jdmaster.c if we are doing full decompression. The transcoder library + * doesn't use these values, but the calling application might. + */ + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) cinfo->max_h_samp_factor); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) cinfo->max_v_samp_factor); + /* Mark component needed, until color conversion says otherwise */ + compptr->component_needed = TRUE; + /* Mark no quantization table yet saved for component */ + compptr->quant_table = NULL; + } + + /* Compute number of fully interleaved MCU rows. */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor*DCTSIZE)); + + /* Decide whether file contains multiple scans */ + if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) + cinfo->inputctl->has_multiple_scans = TRUE; + else + cinfo->inputctl->has_multiple_scans = FALSE; +} + + +LOCAL(void) +per_scan_setup (j_decompress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, + (long) (cinfo->max_h_samp_factor*DCTSIZE)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor*DCTSIZE)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } +} + + +/* + * Save away a copy of the Q-table referenced by each component present + * in the current scan, unless already saved during a prior scan. + * + * In a multiple-scan JPEG file, the encoder could assign different components + * the same Q-table slot number, but change table definitions between scans + * so that each component uses a different Q-table. (The IJG encoder is not + * currently capable of doing this, but other encoders might.) Since we want + * to be able to dequantize all the components at the end of the file, this + * means that we have to save away the table actually used for each component. + * We do this by copying the table at the start of the first scan containing + * the component. + * The JPEG spec prohibits the encoder from changing the contents of a Q-table + * slot between scans of a component using that slot. If the encoder does so + * anyway, this decoder will simply use the Q-table values that were current + * at the start of the first scan for the component. + * + * The decompressor output side looks only at the saved quant tables, + * not at the current Q-table slots. + */ + +LOCAL(void) +latch_quant_tables (j_decompress_ptr cinfo) +{ + int ci, qtblno; + jpeg_component_info *compptr; + JQUANT_TBL * qtbl; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* No work if we already saved Q-table for this component */ + if (compptr->quant_table != NULL) + continue; + /* Make sure specified quantization table is present */ + qtblno = compptr->quant_tbl_no; + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + /* OK, save away the quantization table */ + qtbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(JQUANT_TBL)); + MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); + compptr->quant_table = qtbl; + } +} + + +/* + * Initialize the input modules to read a scan of compressed data. + * The first call to this is done by jdmaster.c after initializing + * the entire decompressor (during jpeg_start_decompress). + * Subsequent calls come from consume_markers, below. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + per_scan_setup(cinfo); + latch_quant_tables(cinfo); + (*cinfo->entropy->start_pass) (cinfo); + (*cinfo->coef->start_input_pass) (cinfo); + cinfo->inputctl->consume_input = cinfo->coef->consume_data; +} + + +/* + * Finish up after inputting a compressed-data scan. + * This is called by the coefficient controller after it's read all + * the expected data of the scan. + */ + +METHODDEF(void) +finish_input_pass (j_decompress_ptr cinfo) +{ + cinfo->inputctl->consume_input = consume_markers; +} + + +/* + * Read JPEG markers before, between, or after compressed-data scans. + * Change state as necessary when a new scan is reached. + * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * The consume_input method pointer points either here or to the + * coefficient controller's consume_data routine, depending on whether + * we are reading a compressed data segment or inter-segment markers. + */ + +METHODDEF(int) +consume_markers (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + int val; + + if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ + return JPEG_REACHED_EOI; + + val = (*cinfo->marker->read_markers) (cinfo); + + switch (val) { + case JPEG_REACHED_SOS: /* Found SOS */ + if (inputctl->inheaders) { /* 1st SOS */ + initial_setup(cinfo); + inputctl->inheaders = FALSE; + /* Note: start_input_pass must be called by jdmaster.c + * before any more input can be consumed. jdapimin.c is + * responsible for enforcing this sequencing. + */ + } else { /* 2nd or later SOS marker */ + if (! inputctl->pub.has_multiple_scans) + ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ + start_input_pass(cinfo); + } + break; + case JPEG_REACHED_EOI: /* Found EOI */ + inputctl->pub.eoi_reached = TRUE; + if (inputctl->inheaders) { /* Tables-only datastream, apparently */ + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_NO_SOS); + } else { + /* Prevent infinite loop in coef ctlr's decompress_data routine + * if user set output_scan_number larger than number of scans. + */ + if (cinfo->output_scan_number > cinfo->input_scan_number) + cinfo->output_scan_number = cinfo->input_scan_number; + } + break; + case JPEG_SUSPENDED: + break; + } + + return val; +} + + +/* + * Reset state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + + inputctl->pub.consume_input = consume_markers; + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = TRUE; + /* Reset other modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->marker->reset_marker_reader) (cinfo); + /* Reset progression state -- would be cleaner if entropy decoder did this */ + cinfo->coef_bits = NULL; +} + + +/* + * Initialize the input controller module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl; + + /* Create subobject in permanent pool */ + inputctl = (my_inputctl_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_input_controller)); + cinfo->inputctl = (struct jpeg_input_controller *) inputctl; + /* Initialize method pointers */ + inputctl->pub.consume_input = consume_markers; + inputctl->pub.reset_input_controller = reset_input_controller; + inputctl->pub.start_input_pass = start_input_pass; + inputctl->pub.finish_input_pass = finish_input_pass; + /* Initialize state: can't use reset_input_controller since we don't + * want to try to reset other modules yet. + */ + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = TRUE; +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdmainct.c b/third_party/libjpeg/fpdfapi_jdmainct.c new file mode 100644 index 0000000000..1483e6fff0 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdmainct.c @@ -0,0 +1,515 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdmainct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for decompression. + * The main buffer lies between the JPEG decompressor proper and the + * post-processor; it holds downsampled data in the JPEG colorspace. + * + * Note that this code is bypassed in raw-data mode, since the application + * supplies the equivalent of the main buffer in that case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * In the current system design, the main buffer need never be a full-image + * buffer; any full-height buffers will be found inside the coefficient or + * postprocessing controllers. Nonetheless, the main controller is not + * trivial. Its responsibility is to provide context rows for upsampling/ + * rescaling, and doing this in an efficient fashion is a bit tricky. + * + * Postprocessor input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * sample rows of each component. (We require DCT_scaled_size values to be + * chosen such that these numbers are integers. In practice DCT_scaled_size + * values will likely be powers of two, so we actually have the stronger + * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) + * Upsampling will typically produce max_v_samp_factor pixel rows from each + * row group (times any additional scale factor that the upsampler is + * applying). + * + * The coefficient controller will deliver data to us one iMCU row at a time; + * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or + * exactly min_DCT_scaled_size row groups. (This amount of data corresponds + * to one row of MCUs when the image is fully interleaved.) Note that the + * number of sample rows varies across components, but the number of row + * groups does not. Some garbage sample rows may be included in the last iMCU + * row at the bottom of the image. + * + * Depending on the vertical scaling algorithm used, the upsampler may need + * access to the sample row(s) above and below its current input row group. + * The upsampler is required to set need_context_rows TRUE at global selection + * time if so. When need_context_rows is FALSE, this controller can simply + * obtain one iMCU row at a time from the coefficient controller and dole it + * out as row groups to the postprocessor. + * + * When need_context_rows is TRUE, this controller guarantees that the buffer + * passed to postprocessing contains at least one row group's worth of samples + * above and below the row group(s) being processed. Note that the context + * rows "above" the first passed row group appear at negative row offsets in + * the passed buffer. At the top and bottom of the image, the required + * context rows are manufactured by duplicating the first or last real sample + * row; this avoids having special cases in the upsampling inner loops. + * + * The amount of context is fixed at one row group just because that's a + * convenient number for this controller to work with. The existing + * upsamplers really only need one sample row of context. An upsampler + * supporting arbitrary output rescaling might wish for more than one row + * group of context when shrinking the image; tough, we don't handle that. + * (This is justified by the assumption that downsizing will be handled mostly + * by adjusting the DCT_scaled_size values, so that the actual scale factor at + * the upsample step needn't be much less than one.) + * + * To provide the desired context, we have to retain the last two row groups + * of one iMCU row while reading in the next iMCU row. (The last row group + * can't be processed until we have another row group for its below-context, + * and so we have to save the next-to-last group too for its above-context.) + * We could do this most simply by copying data around in our buffer, but + * that'd be very slow. We can avoid copying any data by creating a rather + * strange pointer structure. Here's how it works. We allocate a workspace + * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number + * of row groups per iMCU row). We create two sets of redundant pointers to + * the workspace. Labeling the physical row groups 0 to M+1, the synthesized + * pointer lists look like this: + * M+1 M-1 + * master pointer --> 0 master pointer --> 0 + * 1 1 + * ... ... + * M-3 M-3 + * M-2 M + * M-1 M+1 + * M M-2 + * M+1 M-1 + * 0 0 + * We read alternate iMCU rows using each master pointer; thus the last two + * row groups of the previous iMCU row remain un-overwritten in the workspace. + * The pointer lists are set up so that the required context rows appear to + * be adjacent to the proper places when we pass the pointer lists to the + * upsampler. + * + * The above pictures describe the normal state of the pointer lists. + * At top and bottom of the image, we diddle the pointer lists to duplicate + * the first or last sample row as necessary (this is cheaper than copying + * sample rows around). + * + * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that + * situation each iMCU row provides only one row group so the buffering logic + * must be different (eg, we must read two iMCU rows before we can emit the + * first row group). For now, we simply do not support providing context + * rows when min_DCT_scaled_size is 1. That combination seems unlikely to + * be worth providing --- if someone wants a 1/8th-size preview, they probably + * want it quick and dirty, so a context-free upsampler is sufficient. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_main_controller pub; /* public fields */ + + /* Pointer to allocated workspace (M or M+2 row groups). */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + + boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ + JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ + + /* Remaining fields are only used in the context case. */ + + /* These are the master pointers to the funny-order pointer lists. */ + JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ + + int whichptr; /* indicates which pointer set is now in use */ + int context_state; /* process_data state machine status */ + JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ + JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + +/* context_state values: */ +#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ +#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ +#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ + + +/* Forward declarations */ +METHODDEF(void) process_data_simple_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +METHODDEF(void) process_data_context_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF(void) process_data_crank_post + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#endif + + +LOCAL(void) +alloc_funny_pointers (j_decompress_ptr cinfo) +/* Allocate space for the funny pointer lists. + * This is done only once, not once per pass. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, rgroup; + int M = cinfo->min_DCT_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + /* Get top-level space for component array pointers. + * We alloc both arrays with one call to save a few cycles. + */ + main->xbuffer[0] = (JSAMPIMAGE) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); + main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; /* height of a row group of component */ + /* Get space for pointer lists --- M+4 row groups in each list. + * We alloc both pointer lists with one call to save a few cycles. + */ + xbuf = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); + xbuf += rgroup; /* want one row group at negative offsets */ + main->xbuffer[0][ci] = xbuf; + xbuf += rgroup * (M + 4); + main->xbuffer[1][ci] = xbuf; + } +} + + +LOCAL(void) +make_funny_pointers (j_decompress_ptr cinfo) +/* Create the funny pointer lists discussed in the comments above. + * The actual workspace is already allocated (in main->buffer), + * and the space for the pointer lists is allocated too. + * This routine just fills in the curiously ordered lists. + * This will be repeated at the beginning of each pass. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY buf, xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; /* height of a row group of component */ + xbuf0 = main->xbuffer[0][ci]; + xbuf1 = main->xbuffer[1][ci]; + /* First copy the workspace pointers as-is */ + buf = main->buffer[ci]; + for (i = 0; i < rgroup * (M + 2); i++) { + xbuf0[i] = xbuf1[i] = buf[i]; + } + /* In the second list, put the last four row groups in swapped order */ + for (i = 0; i < rgroup * 2; i++) { + xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; + xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; + } + /* The wraparound pointers at top and bottom will be filled later + * (see set_wraparound_pointers, below). Initially we want the "above" + * pointers to duplicate the first actual data line. This only needs + * to happen in xbuffer[0]. + */ + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[0]; + } + } +} + + +LOCAL(void) +set_wraparound_pointers (j_decompress_ptr cinfo) +/* Set up the "wraparound" pointers at top and bottom of the pointer lists. + * This changes the pointer list state from top-of-image to the normal state. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; /* height of a row group of component */ + xbuf0 = main->xbuffer[0][ci]; + xbuf1 = main->xbuffer[1][ci]; + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; + xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; + xbuf0[rgroup*(M+2) + i] = xbuf0[i]; + xbuf1[rgroup*(M+2) + i] = xbuf1[i]; + } + } +} + + +LOCAL(void) +set_bottom_pointers (j_decompress_ptr cinfo) +/* Change the pointer lists to duplicate the last sample row at the bottom + * of the image. whichptr indicates which xbuffer holds the final iMCU row. + * Also sets rowgroups_avail to indicate number of nondummy row groups in row. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup, iMCUheight, rows_left; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Count sample rows in one iMCU row and in one row group */ + iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size; + rgroup = iMCUheight / cinfo->min_DCT_scaled_size; + /* Count nondummy sample rows remaining for this component */ + rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); + if (rows_left == 0) rows_left = iMCUheight; + /* Count nondummy row groups. Should get same answer for each component, + * so we need only do it once. + */ + if (ci == 0) { + main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); + } + /* Duplicate the last real sample row rgroup*2 times; this pads out the + * last partial rowgroup and ensures at least one full rowgroup of context. + */ + xbuf = main->xbuffer[main->whichptr][ci]; + for (i = 0; i < rgroup * 2; i++) { + xbuf[rows_left + i] = xbuf[rows_left-1]; + } + } +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->upsample->need_context_rows) { + main->pub.process_data = process_data_context_main; + make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ + main->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ + main->context_state = CTX_PREPARE_FOR_IMCU; + main->iMCU_row_ctr = 0; + } else { + /* Simple case with no context needed */ + main->pub.process_data = process_data_simple_main; + } + main->buffer_full = FALSE; /* Mark buffer empty */ + main->rowgroup_ctr = 0; + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_CRANK_DEST: + /* For last pass of 2-pass quantization, just crank the postprocessor */ + main->pub.process_data = process_data_crank_post; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This handles the simple case where no context is required. + */ + +METHODDEF(void) +process_data_simple_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + JDIMENSION rowgroups_avail; + + /* Read input data if we haven't filled the main buffer yet */ + if (! main->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer)) + return; /* suspension forced, can do nothing more */ + main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + } + + /* There are always min_DCT_scaled_size row groups in an iMCU row. */ + rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size; + /* Note: at the bottom of the image, we may pass extra garbage row groups + * to the postprocessor. The postprocessor has to check for bottom + * of image anyway (at row resolution), so no point in us doing it too. + */ + + /* Feed the postprocessor */ + (*cinfo->post->post_process_data) (cinfo, main->buffer, + &main->rowgroup_ctr, rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + + /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ + if (main->rowgroup_ctr >= rowgroups_avail) { + main->buffer_full = FALSE; + main->rowgroup_ctr = 0; + } +} + + +/* + * Process some data. + * This handles the case where context rows must be provided. + */ + +METHODDEF(void) +process_data_context_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + /* Read input data if we haven't filled the main buffer yet */ + if (! main->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, + main->xbuffer[main->whichptr])) + return; /* suspension forced, can do nothing more */ + main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + main->iMCU_row_ctr++; /* count rows received */ + } + + /* Postprocessor typically will not swallow all the input data it is handed + * in one call (due to filling the output buffer first). Must be prepared + * to exit and restart. This switch lets us keep track of how far we got. + * Note that each case falls through to the next on successful completion. + */ + switch (main->context_state) { + case CTX_POSTPONED_ROW: + /* Call postprocessor using previously set pointers for postponed row */ + (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], + &main->rowgroup_ctr, main->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (main->rowgroup_ctr < main->rowgroups_avail) + return; /* Need to suspend */ + main->context_state = CTX_PREPARE_FOR_IMCU; + if (*out_row_ctr >= out_rows_avail) + return; /* Postprocessor exactly filled output buf */ + /*FALLTHROUGH*/ + case CTX_PREPARE_FOR_IMCU: + /* Prepare to process first M-1 row groups of this iMCU row */ + main->rowgroup_ctr = 0; + main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1); + /* Check for bottom of image: if so, tweak pointers to "duplicate" + * the last sample row, and adjust rowgroups_avail to ignore padding rows. + */ + if (main->iMCU_row_ctr == cinfo->total_iMCU_rows) + set_bottom_pointers(cinfo); + main->context_state = CTX_PROCESS_IMCU; + /*FALLTHROUGH*/ + case CTX_PROCESS_IMCU: + /* Call postprocessor using previously set pointers */ + (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], + &main->rowgroup_ctr, main->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (main->rowgroup_ctr < main->rowgroups_avail) + return; /* Need to suspend */ + /* After the first iMCU, change wraparound pointers to normal state */ + if (main->iMCU_row_ctr == 1) + set_wraparound_pointers(cinfo); + /* Prepare to load new iMCU row using other xbuffer list */ + main->whichptr ^= 1; /* 0=>1 or 1=>0 */ + main->buffer_full = FALSE; + /* Still need to process last row group of this iMCU row, */ + /* which is saved at index M+1 of the other xbuffer */ + main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1); + main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2); + main->context_state = CTX_POSTPONED_ROW; + } +} + + +/* + * Process some data. + * Final pass of two-pass quantization: just call the postprocessor. + * Source data will be the postprocessor controller's internal buffer. + */ + +#ifdef QUANT_2PASS_SUPPORTED + +METHODDEF(void) +process_data_crank_post (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, + (JDIMENSION *) NULL, (JDIMENSION) 0, + output_buf, out_row_ctr, out_rows_avail); +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL(void) +jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr main; + int ci, rgroup, ngroups; + jpeg_component_info *compptr; + + main = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = (struct jpeg_d_main_controller *) main; + main->pub.start_pass = start_pass_main; + + if (need_full_buffer) /* shouldn't happen */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Allocate the workspace. + * ngroups is the number of row groups we need. + */ + if (cinfo->upsample->need_context_rows) { + if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */ + ERREXIT(cinfo, JERR_NOTIMPL); + alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ + ngroups = cinfo->min_DCT_scaled_size + 2; + } else { + ngroups = cinfo->min_DCT_scaled_size; + } + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; /* height of a row group of component */ + main->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * compptr->DCT_scaled_size, + (JDIMENSION) (rgroup * ngroups)); + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdmarker.c b/third_party/libjpeg/fpdfapi_jdmarker.c new file mode 100644 index 0000000000..bcd017f920 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdmarker.c @@ -0,0 +1,1396 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdmarker.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to decode JPEG datastream markers. + * Most of the complexity arises from our desire to support input + * suspension: if not all of the data for a marker is available, + * we must exit back to the application. On resumption, we reprocess + * the marker. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* Private state */ + +typedef struct { + struct jpeg_marker_reader pub; /* public fields */ + + /* Application-overridable marker processing methods */ + jpeg_marker_parser_method process_COM; + jpeg_marker_parser_method process_APPn[16]; + + /* Limit on marker data length to save for each marker type */ + unsigned int length_limit_COM; + unsigned int length_limit_APPn[16]; + + /* Status of COM/APPn marker saving */ + jpeg_saved_marker_ptr cur_marker; /* NULL if not processing a marker */ + unsigned int bytes_read; /* data bytes read so far in marker */ + /* Note: cur_marker is not linked into marker_list until it's all read. */ +} my_marker_reader; + +typedef my_marker_reader * my_marker_ptr; + + +/* + * Macros for fetching data from the data source module. + * + * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect + * the current restart point; we update them only when we have reached a + * suitable place to restart if a suspension occurs. + */ + +/* Declare and initialize local copies of input pointer/count */ +#define INPUT_VARS(cinfo) \ + struct jpeg_source_mgr * datasrc = (cinfo)->src; \ + const JOCTET * next_input_byte = datasrc->next_input_byte; \ + size_t bytes_in_buffer = datasrc->bytes_in_buffer + +/* Unload the local copies --- do this only at a restart boundary */ +#define INPUT_SYNC(cinfo) \ + ( datasrc->next_input_byte = next_input_byte, \ + datasrc->bytes_in_buffer = bytes_in_buffer ) + +/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */ +#define INPUT_RELOAD(cinfo) \ + ( next_input_byte = datasrc->next_input_byte, \ + bytes_in_buffer = datasrc->bytes_in_buffer ) + +/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. + * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, + * but we must reload the local copies after a successful fill. + */ +#define MAKE_BYTE_AVAIL(cinfo,action) \ + if (bytes_in_buffer == 0) { \ + if (! (*datasrc->fill_input_buffer) (cinfo)) \ + { action; } \ + INPUT_RELOAD(cinfo); \ + } + +/* Read a byte into variable V. + * If must suspend, take the specified action (typically "return FALSE"). + */ +#define INPUT_BYTE(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V = GETJOCTET(*next_input_byte++); ) + +/* As above, but read two bytes interpreted as an unsigned 16-bit integer. + * V should be declared unsigned int or perhaps INT32. + */ +#define INPUT_2BYTES(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ + MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V += GETJOCTET(*next_input_byte++); ) + + +/* + * Routines to process JPEG markers. + * + * Entry condition: JPEG marker itself has been read and its code saved + * in cinfo->unread_marker; input restart point is just after the marker. + * + * Exit: if return TRUE, have read and processed any parameters, and have + * updated the restart point to point after the parameters. + * If return FALSE, was forced to suspend before reaching end of + * marker parameters; restart point has not been moved. Same routine + * will be called again after application supplies more input data. + * + * This approach to suspension assumes that all of a marker's parameters + * can fit into a single input bufferload. This should hold for "normal" + * markers. Some COM/APPn markers might have large parameter segments + * that might not fit. If we are simply dropping such a marker, we use + * skip_input_data to get past it, and thereby put the problem on the + * source manager's shoulders. If we are saving the marker's contents + * into memory, we use a slightly different convention: when forced to + * suspend, the marker processor updates the restart point to the end of + * what it's consumed (ie, the end of the buffer) before returning FALSE. + * On resumption, cinfo->unread_marker still contains the marker code, + * but the data source will point to the next chunk of marker data. + * The marker processor must retain internal state to deal with this. + * + * Note that we don't bother to avoid duplicate trace messages if a + * suspension occurs within marker parameters. Other side effects + * require more care. + */ + + +LOCAL(boolean) +get_soi (j_decompress_ptr cinfo) +/* Process an SOI marker */ +{ + int i; + + TRACEMS(cinfo, 1, JTRC_SOI); + + if (cinfo->marker->saw_SOI) + ERREXIT(cinfo, JERR_SOI_DUPLICATE); + + /* Reset all parameters that are defined to be reset by SOI */ + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + cinfo->restart_interval = 0; + + /* Set initial assumptions for colorspace etc */ + + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ + + cinfo->saw_JFIF_marker = FALSE; + cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */ + cinfo->JFIF_minor_version = 1; + cinfo->density_unit = 0; + cinfo->X_density = 1; + cinfo->Y_density = 1; + cinfo->saw_Adobe_marker = FALSE; + cinfo->Adobe_transform = 0; + + cinfo->marker->saw_SOI = TRUE; + + return TRUE; +} + + +LOCAL(boolean) +get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith) +/* Process a SOFn marker */ +{ + INT32 length; + int c, ci; + jpeg_component_info * compptr; + /* LiuSunliang added 20111209 */ + JDIMENSION image_width, image_height; + INPUT_VARS(cinfo); + + cinfo->progressive_mode = is_prog; + cinfo->arith_code = is_arith; + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); + INPUT_2BYTES(cinfo, image_height, return FALSE); + INPUT_2BYTES(cinfo, image_width, return FALSE); + INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); + + if (image_width <= JPEG_MAX_DIMENSION) + cinfo->image_width = image_width; + + if (image_height <= JPEG_MAX_DIMENSION) + cinfo->image_height = image_height; + + length -= 8; + + TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, + (int) cinfo->image_width, (int) cinfo->image_height, + cinfo->num_components); + + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_DUPLICATE); + + /* We don't support files in which the image height is initially specified */ + /* as 0 and is later redefined by DNL. As long as we have to check that, */ + /* might as well have a general sanity check. */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 + || cinfo->num_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + if (length != (cinfo->num_components * 3)) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + if (cinfo->comp_info == NULL) /* do only once, even if suspend */ + cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * SIZEOF(jpeg_component_info)); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->component_index = ci; + INPUT_BYTE(cinfo, compptr->component_id, return FALSE); + /* XYQ 2008-03-25: Adobe CMYK JPEG has serious flaw: the K channel has same component id as C channel */ + { + int i; + for (i = 0; i < ci; i ++) + if (compptr->component_id == cinfo->comp_info[i].component_id) break; + if (i < ci) + /* Found the error! We replace the id with something unlikely used elsewhere */ + compptr->component_id += 0xf0; + } + /* end of modification */ + INPUT_BYTE(cinfo, c, return FALSE); + compptr->h_samp_factor = (c >> 4) & 15; + compptr->v_samp_factor = (c ) & 15; + INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); + + TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, + compptr->component_id, compptr->h_samp_factor, + compptr->v_samp_factor, compptr->quant_tbl_no); + } + + cinfo->marker->saw_SOF = TRUE; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_sos (j_decompress_ptr cinfo) +/* Process a SOS marker */ +{ + INT32 length; + int i, ci, n, c, cc; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + if (! cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOS_NO_SOF); + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ + + TRACEMS1(cinfo, 1, JTRC_SOS, n); + + if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + cinfo->comps_in_scan = n; + + /* Collect the component-spec parameters */ + + for (i = 0; i < n; i++) { + INPUT_BYTE(cinfo, cc, return FALSE); + INPUT_BYTE(cinfo, c, return FALSE); + + /* XYQ 2008-03-25: Adobe CMYK JPEG has serious flaw: the K channel has same component id as C channel */ + { + int j; + for (j = 0; j < i; j ++) + if (cc == cinfo->cur_comp_info[j]->component_id) break; + if (j < i) + /* found the error! */ + cc += 0xf0; + } + /* end of modification */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (cc == compptr->component_id) + goto id_found; + } + + ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); + + id_found: + + cinfo->cur_comp_info[i] = compptr; + compptr->dc_tbl_no = (c >> 4) & 15; + compptr->ac_tbl_no = (c ) & 15; + + TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc, + compptr->dc_tbl_no, compptr->ac_tbl_no); + /* This CSi (cc) should differ from the previous CSi */ + for (ci = 0; ci < i; ci++) { + if (cinfo->cur_comp_info[ci] == compptr) + ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); + } + } + + /* Collect the additional scan parameters Ss, Se, Ah/Al. */ + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ss = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Se = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ah = (c >> 4) & 15; + cinfo->Al = (c ) & 15; + + TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, + cinfo->Ah, cinfo->Al); + + /* Prepare to scan data & restart markers */ + cinfo->marker->next_restart_num = 0; + + /* Count another SOS marker */ + cinfo->input_scan_number++; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +#ifdef D_ARITH_CODING_SUPPORTED + +LOCAL(boolean) +get_dac (j_decompress_ptr cinfo) +/* Process a DAC marker */ +{ + INT32 length; + int index, val; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + INPUT_BYTE(cinfo, index, return FALSE); + INPUT_BYTE(cinfo, val, return FALSE); + + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_DAC, index, val); + + if (index < 0 || index >= (2*NUM_ARITH_TBLS)) + ERREXIT1(cinfo, JERR_DAC_INDEX, index); + + if (index >= NUM_ARITH_TBLS) { /* define AC table */ + cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; + } else { /* define DC table */ + cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); + cinfo->arith_dc_U[index] = (UINT8) (val >> 4); + if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) + ERREXIT1(cinfo, JERR_DAC_VALUE, val); + } + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + +#else /* ! D_ARITH_CODING_SUPPORTED */ + +#define get_dac(cinfo) skip_variable(cinfo) + +#endif /* D_ARITH_CODING_SUPPORTED */ + + +LOCAL(boolean) +get_dht (j_decompress_ptr cinfo) +/* Process a DHT marker */ +{ + INT32 length; + UINT8 bits[17]; + UINT8 huffval[256]; + int i, index, count; + JHUFF_TBL **htblptr; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 16) { + INPUT_BYTE(cinfo, index, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DHT, index); + + bits[0] = 0; + count = 0; + for (i = 1; i <= 16; i++) { + INPUT_BYTE(cinfo, bits[i], return FALSE); + count += bits[i]; + } + + length -= 1 + 16; + + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[1], bits[2], bits[3], bits[4], + bits[5], bits[6], bits[7], bits[8]); + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[9], bits[10], bits[11], bits[12], + bits[13], bits[14], bits[15], bits[16]); + + /* Here we just do minimal validation of the counts to avoid walking + * off the end of our table space. jdhuff.c will check more carefully. + */ + if (count > 256 || ((INT32) count) > length) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + for (i = 0; i < count; i++) + INPUT_BYTE(cinfo, huffval[i], return FALSE); + + length -= count; + + if (index & 0x10) { /* AC table definition */ + index -= 0x10; + htblptr = &cinfo->ac_huff_tbl_ptrs[index]; + } else { /* DC table definition */ + htblptr = &cinfo->dc_huff_tbl_ptrs[index]; + } + + if (index < 0 || index >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_DHT_INDEX, index); + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_dqt (j_decompress_ptr cinfo) +/* Process a DQT marker */ +{ + INT32 length; + int n, i, prec; + unsigned int tmp; + JQUANT_TBL *quant_ptr; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + INPUT_BYTE(cinfo, n, return FALSE); + prec = n >> 4; + n &= 0x0F; + + TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); + + if (n >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, n); + + if (cinfo->quant_tbl_ptrs[n] == NULL) + cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); + quant_ptr = cinfo->quant_tbl_ptrs[n]; + + for (i = 0; i < DCTSIZE2; i++) { + if (prec) + INPUT_2BYTES(cinfo, tmp, return FALSE); + else + INPUT_BYTE(cinfo, tmp, return FALSE); + /* We convert the zigzag-order table to natural array order. */ + quant_ptr->quantval[jpeg_natural_order[i]] = (UINT16) tmp; + } + + if (cinfo->err->trace_level >= 2) { + for (i = 0; i < DCTSIZE2; i += 8) { + TRACEMS8(cinfo, 2, JTRC_QUANTVALS, + quant_ptr->quantval[i], quant_ptr->quantval[i+1], + quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], + quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], + quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); + } + } + + length -= DCTSIZE2+1; + if (prec) length -= DCTSIZE2; + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_dri (j_decompress_ptr cinfo) +/* Process a DRI marker */ +{ + INT32 length; + unsigned int tmp; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + + if (length != 4) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_2BYTES(cinfo, tmp, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DRI, tmp); + + cinfo->restart_interval = tmp; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Routines for processing APPn and COM markers. + * These are either saved in memory or discarded, per application request. + * APP0 and APP14 are specially checked to see if they are + * JFIF and Adobe markers, respectively. + */ + +#define APP0_DATA_LEN 14 /* Length of interesting data in APP0 */ +#define APP14_DATA_LEN 12 /* Length of interesting data in APP14 */ +#define APPN_DATA_LEN 14 /* Must be the largest of the above!! */ + + +LOCAL(void) +examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, + unsigned int datalen, INT32 remaining) +/* Examine first few bytes from an APP0. + * Take appropriate action if it is a JFIF marker. + * datalen is # of bytes at data[], remaining is length of rest of marker data. + */ +{ + INT32 totallen = (INT32) datalen + remaining; + + if (datalen >= APP0_DATA_LEN && + GETJOCTET(data[0]) == 0x4A && + GETJOCTET(data[1]) == 0x46 && + GETJOCTET(data[2]) == 0x49 && + GETJOCTET(data[3]) == 0x46 && + GETJOCTET(data[4]) == 0) { + /* Found JFIF APP0 marker: save info */ + cinfo->saw_JFIF_marker = TRUE; + cinfo->JFIF_major_version = GETJOCTET(data[5]); + cinfo->JFIF_minor_version = GETJOCTET(data[6]); + cinfo->density_unit = GETJOCTET(data[7]); + cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]); + cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]); + /* Check version. + * Major version must be 1, anything else signals an incompatible change. + * (We used to treat this as an error, but now it's a nonfatal warning, + * because some bozo at Hijaak couldn't read the spec.) + * Minor version should be 0..2, but process anyway if newer. + */ + if (cinfo->JFIF_major_version != 1) + WARNMS2(cinfo, JWRN_JFIF_MAJOR, + cinfo->JFIF_major_version, cinfo->JFIF_minor_version); + /* Generate trace messages */ + TRACEMS5(cinfo, 1, JTRC_JFIF, + cinfo->JFIF_major_version, cinfo->JFIF_minor_version, + cinfo->X_density, cinfo->Y_density, cinfo->density_unit); + /* Validate thumbnail dimensions and issue appropriate messages */ + if (GETJOCTET(data[12]) | GETJOCTET(data[13])) + TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, + GETJOCTET(data[12]), GETJOCTET(data[13])); + totallen -= APP0_DATA_LEN; + if (totallen != + ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3)) + TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen); + } else if (datalen >= 6 && + GETJOCTET(data[0]) == 0x4A && + GETJOCTET(data[1]) == 0x46 && + GETJOCTET(data[2]) == 0x58 && + GETJOCTET(data[3]) == 0x58 && + GETJOCTET(data[4]) == 0) { + /* Found JFIF "JFXX" extension APP0 marker */ + /* The library doesn't actually do anything with these, + * but we try to produce a helpful trace message. + */ + switch (GETJOCTET(data[5])) { + case 0x10: + TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen); + break; + case 0x11: + TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen); + break; + case 0x13: + TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen); + break; + default: + TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION, + GETJOCTET(data[5]), (int) totallen); + break; + } + } else { + /* Start of APP0 does not match "JFIF" or "JFXX", or too short */ + TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen); + } +} + + +LOCAL(void) +examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data, + unsigned int datalen, INT32 remaining) +/* Examine first few bytes from an APP14. + * Take appropriate action if it is an Adobe marker. + * datalen is # of bytes at data[], remaining is length of rest of marker data. + */ +{ + unsigned int version, flags0, flags1, transform; + + if (datalen >= APP14_DATA_LEN && + GETJOCTET(data[0]) == 0x41 && + GETJOCTET(data[1]) == 0x64 && + GETJOCTET(data[2]) == 0x6F && + GETJOCTET(data[3]) == 0x62 && + GETJOCTET(data[4]) == 0x65) { + /* Found Adobe APP14 marker */ + version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]); + flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]); + flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]); + transform = GETJOCTET(data[11]); + TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); + cinfo->saw_Adobe_marker = TRUE; + cinfo->Adobe_transform = (UINT8) transform; + } else { + /* Start of APP14 does not match "Adobe", or too short */ + TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining)); + } +} + + +METHODDEF(boolean) +get_interesting_appn (j_decompress_ptr cinfo) +/* Process an APP0 or APP14 marker without saving it */ +{ + INT32 length; + JOCTET b[APPN_DATA_LEN]; + unsigned int i, numtoread; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + /* get the interesting part of the marker data */ + if (length >= APPN_DATA_LEN) + numtoread = APPN_DATA_LEN; + else if (length > 0) + numtoread = (unsigned int) length; + else + numtoread = 0; + for (i = 0; i < numtoread; i++) + INPUT_BYTE(cinfo, b[i], return FALSE); + length -= numtoread; + + /* process it */ + switch (cinfo->unread_marker) { + case M_APP0: + examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length); + break; + case M_APP14: + examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length); + break; + default: + /* can't get here unless jpeg_save_markers chooses wrong processor */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + + /* skip any remaining data -- could be lots */ + INPUT_SYNC(cinfo); + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +#ifdef SAVE_MARKERS_SUPPORTED + +METHODDEF(boolean) +save_marker (j_decompress_ptr cinfo) +/* Save an APPn or COM marker into the marker list */ +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + jpeg_saved_marker_ptr cur_marker = marker->cur_marker; + unsigned int bytes_read, data_length; + JOCTET FAR * data; + INT32 length = 0; + INPUT_VARS(cinfo); + + if (cur_marker == NULL) { + /* begin reading a marker */ + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + if (length >= 0) { /* watch out for bogus length word */ + /* figure out how much we want to save */ + unsigned int limit; + if (cinfo->unread_marker == (int) M_COM) + limit = marker->length_limit_COM; + else + limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0]; + if ((unsigned int) length < limit) + limit = (unsigned int) length; + /* allocate and initialize the marker item */ + cur_marker = (jpeg_saved_marker_ptr) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(struct jpeg_marker_struct) + limit); + cur_marker->next = NULL; + cur_marker->marker = (UINT8) cinfo->unread_marker; + cur_marker->original_length = (unsigned int) length; + cur_marker->data_length = limit; + /* data area is just beyond the jpeg_marker_struct */ + data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1); + marker->cur_marker = cur_marker; + marker->bytes_read = 0; + bytes_read = 0; + data_length = limit; + } else { + /* deal with bogus length word */ + bytes_read = data_length = 0; + data = NULL; + } + } else { + /* resume reading a marker */ + bytes_read = marker->bytes_read; + data_length = cur_marker->data_length; + data = cur_marker->data + bytes_read; + } + + while (bytes_read < data_length) { + INPUT_SYNC(cinfo); /* move the restart point to here */ + marker->bytes_read = bytes_read; + /* If there's not at least one byte in buffer, suspend */ + MAKE_BYTE_AVAIL(cinfo, return FALSE); + /* Copy bytes with reasonable rapidity */ + while (bytes_read < data_length && bytes_in_buffer > 0) { + *data++ = *next_input_byte++; + bytes_in_buffer--; + bytes_read++; + } + } + + /* Done reading what we want to read */ + if (cur_marker != NULL) { /* will be NULL if bogus length word */ + /* Add new marker to end of list */ + if (cinfo->marker_list == NULL) { + cinfo->marker_list = cur_marker; + } else { + jpeg_saved_marker_ptr prev = cinfo->marker_list; + while (prev->next != NULL) + prev = prev->next; + prev->next = cur_marker; + } + /* Reset pointer & calc remaining data length */ + data = cur_marker->data; + length = cur_marker->original_length - data_length; + } + /* Reset to initial state for next marker */ + marker->cur_marker = NULL; + + /* Process the marker if interesting; else just make a generic trace msg */ + switch (cinfo->unread_marker) { + case M_APP0: + examine_app0(cinfo, data, data_length, length); + break; + case M_APP14: + examine_app14(cinfo, data, data_length, length); + break; + default: + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, + (int) (data_length + length)); + break; + } + + /* skip any remaining data -- could be lots */ + INPUT_SYNC(cinfo); /* do before skip_input_data */ + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + +#endif /* SAVE_MARKERS_SUPPORTED */ + + +METHODDEF(boolean) +skip_variable (j_decompress_ptr cinfo) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + INT32 length; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); + + INPUT_SYNC(cinfo); /* do before skip_input_data */ + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +/* + * Find the next JPEG marker, save it in cinfo->unread_marker. + * Returns FALSE if had to suspend before reaching a marker; + * in that case cinfo->unread_marker is unchanged. + * + * Note that the result might not be a valid marker code, + * but it will never be 0 or FF. + */ + +LOCAL(boolean) +next_marker (j_decompress_ptr cinfo) +{ + int c; + INPUT_VARS(cinfo); + + for (;;) { + INPUT_BYTE(cinfo, c, return FALSE); + /* Skip any non-FF bytes. + * This may look a bit inefficient, but it will not occur in a valid file. + * We sync after each discarded byte so that a suspending data source + * can discard the byte from its buffer. + */ + while (c != 0xFF) { + cinfo->marker->discarded_bytes++; + INPUT_SYNC(cinfo); + INPUT_BYTE(cinfo, c, return FALSE); + } + /* This loop swallows any duplicate FF bytes. Extra FFs are legal as + * pad bytes, so don't count them in discarded_bytes. We assume there + * will not be so many consecutive FF bytes as to overflow a suspending + * data source's input buffer. + */ + do { + INPUT_BYTE(cinfo, c, return FALSE); + } while (c == 0xFF); + if (c != 0) + break; /* found a valid marker, exit loop */ + /* Reach here if we found a stuffed-zero data sequence (FF/00). + * Discard it and loop back to try again. + */ + cinfo->marker->discarded_bytes += 2; + INPUT_SYNC(cinfo); + } + + if (cinfo->marker->discarded_bytes != 0) { + WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); + cinfo->marker->discarded_bytes = 0; + } + + cinfo->unread_marker = c; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +first_marker (j_decompress_ptr cinfo) +/* Like next_marker, but used to obtain the initial SOI marker. */ +/* For this marker, we do not allow preceding garbage or fill; otherwise, + * we might well scan an entire input file before realizing it ain't JPEG. + * If an application wants to process non-JFIF files, it must seek to the + * SOI before calling the JPEG library. + */ +{ + int c, c2; + INPUT_VARS(cinfo); + + INPUT_BYTE(cinfo, c, return FALSE); + INPUT_BYTE(cinfo, c2, return FALSE); + if (c != 0xFF || c2 != (int) M_SOI) + ERREXIT2(cinfo, JERR_NO_SOI, c, c2); + + cinfo->unread_marker = c2; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Read markers until SOS or EOI. + * + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + +METHODDEF(int) +read_markers (j_decompress_ptr cinfo) +{ + /* Outer loop repeats once for each marker. */ + for (;;) { + /* Collect the marker proper, unless we already did. */ + /* NB: first_marker() enforces the requirement that SOI appear first. */ + if (cinfo->unread_marker == 0) { + if (! cinfo->marker->saw_SOI) { + if (! first_marker(cinfo)) + return JPEG_SUSPENDED; + } else { + if (! next_marker(cinfo)) + return JPEG_SUSPENDED; + } + } + /* At this point cinfo->unread_marker contains the marker code and the + * input point is just past the marker proper, but before any parameters. + * A suspension will cause us to return with this state still true. + */ + switch (cinfo->unread_marker) { + case M_SOI: + if (! get_soi(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_SOF0: /* Baseline */ + case M_SOF1: /* Extended sequential, Huffman */ + if (! get_sof(cinfo, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF2: /* Progressive, Huffman */ + if (! get_sof(cinfo, TRUE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF9: /* Extended sequential, arithmetic */ + if (! get_sof(cinfo, FALSE, TRUE)) + return JPEG_SUSPENDED; + break; + + case M_SOF10: /* Progressive, arithmetic */ + if (! get_sof(cinfo, TRUE, TRUE)) + return JPEG_SUSPENDED; + break; + + /* Currently unsupported SOFn types */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_JPG: /* Reserved for JPEG extensions */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); + break; + + case M_SOS: + if (! get_sos(cinfo)) + return JPEG_SUSPENDED; + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_SOS; + + case M_EOI: + TRACEMS(cinfo, 1, JTRC_EOI); + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_EOI; + + case M_DAC: + if (! get_dac(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DHT: + if (! get_dht(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DQT: + if (! get_dqt(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DRI: + if (! get_dri(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_APP0: + case M_APP1: + case M_APP2: + case M_APP3: + case M_APP4: + case M_APP5: + case M_APP6: + case M_APP7: + case M_APP8: + case M_APP9: + case M_APP10: + case M_APP11: + case M_APP12: + case M_APP13: + case M_APP14: + case M_APP15: + if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[ + cinfo->unread_marker - (int) M_APP0]) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_COM: + if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_RST0: /* these are all parameterless */ + case M_RST1: + case M_RST2: + case M_RST3: + case M_RST4: + case M_RST5: + case M_RST6: + case M_RST7: + case M_TEM: + TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); + break; + + case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ + if (! skip_variable(cinfo)) + return JPEG_SUSPENDED; + break; + + default: /* must be DHP, EXP, JPGn, or RESn */ + /* For now, we treat the reserved markers as fatal errors since they are + * likely to be used to signal incompatible JPEG Part 3 extensions. + * Once the JPEG 3 version-number marker is well defined, this code + * ought to change! + */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + /* Successfully processed marker, so reset state variable */ + cinfo->unread_marker = 0; + } /* end loop */ +} + + +/* + * Read a restart marker, which is expected to appear next in the datastream; + * if the marker is not there, take appropriate recovery action. + * Returns FALSE if suspension is required. + * + * This is called by the entropy decoder after it has read an appropriate + * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder + * has already read a marker from the data source. Under normal conditions + * cinfo->unread_marker will be reset to 0 before returning; if not reset, + * it holds a marker which the decoder will be unable to read past. + */ + +METHODDEF(boolean) +read_restart_marker (j_decompress_ptr cinfo) +{ + /* Obtain a marker unless we already did. */ + /* Note that next_marker will complain if it skips any data. */ + if (cinfo->unread_marker == 0) { + if (! next_marker(cinfo)) + return FALSE; + } + + if (cinfo->unread_marker == + ((int) M_RST0 + cinfo->marker->next_restart_num)) { + /* Normal case --- swallow the marker and let entropy decoder continue */ + TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num); + cinfo->unread_marker = 0; + } else { + /* Uh-oh, the restart markers have been messed up. */ + /* Let the data source manager determine how to resync. */ + if (! (*cinfo->src->resync_to_restart) (cinfo, + cinfo->marker->next_restart_num)) + return FALSE; + } + + /* Update next-restart state */ + cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; + + return TRUE; +} + + +/* + * This is the default resync_to_restart method for data source managers + * to use if they don't have any better approach. Some data source managers + * may be able to back up, or may have additional knowledge about the data + * which permits a more intelligent recovery strategy; such managers would + * presumably supply their own resync method. + * + * read_restart_marker calls resync_to_restart if it finds a marker other than + * the restart marker it was expecting. (This code is *not* used unless + * a nonzero restart interval has been declared.) cinfo->unread_marker is + * the marker code actually found (might be anything, except 0 or FF). + * The desired restart marker number (0..7) is passed as a parameter. + * This routine is supposed to apply whatever error recovery strategy seems + * appropriate in order to position the input stream to the next data segment. + * Note that cinfo->unread_marker is treated as a marker appearing before + * the current data-source input point; usually it should be reset to zero + * before returning. + * Returns FALSE if suspension is required. + * + * This implementation is substantially constrained by wanting to treat the + * input as a data stream; this means we can't back up. Therefore, we have + * only the following actions to work with: + * 1. Simply discard the marker and let the entropy decoder resume at next + * byte of file. + * 2. Read forward until we find another marker, discarding intervening + * data. (In theory we could look ahead within the current bufferload, + * without having to discard data if we don't find the desired marker. + * This idea is not implemented here, in part because it makes behavior + * dependent on buffer size and chance buffer-boundary positions.) + * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). + * This will cause the entropy decoder to process an empty data segment, + * inserting dummy zeroes, and then we will reprocess the marker. + * + * #2 is appropriate if we think the desired marker lies ahead, while #3 is + * appropriate if the found marker is a future restart marker (indicating + * that we have missed the desired restart marker, probably because it got + * corrupted). + * We apply #2 or #3 if the found marker is a restart marker no more than + * two counts behind or ahead of the expected one. We also apply #2 if the + * found marker is not a legal JPEG marker code (it's certainly bogus data). + * If the found marker is a restart marker more than 2 counts away, we do #1 + * (too much risk that the marker is erroneous; with luck we will be able to + * resync at some future point). + * For any valid non-restart JPEG marker, we apply #3. This keeps us from + * overrunning the end of a scan. An implementation limited to single-scan + * files might find it better to apply #2 for markers other than EOI, since + * any other marker would have to be bogus data in that case. + */ + +GLOBAL(boolean) +jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) +{ + int marker = cinfo->unread_marker; + int action = 1; + + /* Always put up a warning. */ + WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); + + /* Outer loop handles repeated decision after scanning forward. */ + for (;;) { + if (marker < (int) M_SOF0) + action = 2; /* invalid marker */ + else if (marker < (int) M_RST0 || marker > (int) M_RST7) + action = 3; /* valid non-restart marker */ + else { + if (marker == ((int) M_RST0 + ((desired+1) & 7)) || + marker == ((int) M_RST0 + ((desired+2) & 7))) + action = 3; /* one of the next two expected restarts */ + else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || + marker == ((int) M_RST0 + ((desired-2) & 7))) + action = 2; /* a prior restart, so advance */ + else + action = 1; /* desired restart or too far away */ + } + TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); + switch (action) { + case 1: + /* Discard marker and let entropy decoder resume processing. */ + cinfo->unread_marker = 0; + return TRUE; + case 2: + /* Scan to the next marker, and repeat the decision loop. */ + if (! next_marker(cinfo)) + return FALSE; + marker = cinfo->unread_marker; + break; + case 3: + /* Return without advancing past this marker. */ + /* Entropy decoder will be forced to process an empty segment. */ + return TRUE; + } + } /* end loop */ +} + + +/* + * Reset marker processing state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_marker_reader (j_decompress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + cinfo->comp_info = NULL; /* until allocated by get_sof */ + cinfo->input_scan_number = 0; /* no SOS seen yet */ + cinfo->unread_marker = 0; /* no pending marker */ + marker->pub.saw_SOI = FALSE; /* set internal state too */ + marker->pub.saw_SOF = FALSE; + marker->pub.discarded_bytes = 0; + marker->cur_marker = NULL; +} + + +/* + * Initialize the marker reader module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_marker_reader (j_decompress_ptr cinfo) +{ + my_marker_ptr marker; + int i; + + /* Create subobject in permanent pool */ + marker = (my_marker_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_marker_reader)); + cinfo->marker = (struct jpeg_marker_reader *) marker; + /* Initialize public method pointers */ + marker->pub.reset_marker_reader = reset_marker_reader; + marker->pub.read_markers = read_markers; + marker->pub.read_restart_marker = read_restart_marker; + /* Initialize COM/APPn processing. + * By default, we examine and then discard APP0 and APP14, + * but simply discard COM and all other APPn. + */ + marker->process_COM = skip_variable; + marker->length_limit_COM = 0; + for (i = 0; i < 16; i++) { + marker->process_APPn[i] = skip_variable; + marker->length_limit_APPn[i] = 0; + } + marker->process_APPn[0] = get_interesting_appn; + marker->process_APPn[14] = get_interesting_appn; + /* Reset marker processing state */ + reset_marker_reader(cinfo); +} + + +/* + * Control saving of COM and APPn markers into marker_list. + */ + +#ifdef SAVE_MARKERS_SUPPORTED + +GLOBAL(void) +jpeg_save_markers (j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + long maxlength; + jpeg_marker_parser_method processor; + + /* Length limit mustn't be larger than what we can allocate + * (should only be a concern in a 16-bit environment). + */ + maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct); + if (((long) length_limit) > maxlength) + length_limit = (unsigned int) maxlength; + + /* Choose processor routine to use. + * APP0/APP14 have special requirements. + */ + if (length_limit) { + processor = save_marker; + /* If saving APP0/APP14, save at least enough for our internal use. */ + if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN) + length_limit = APP0_DATA_LEN; + else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN) + length_limit = APP14_DATA_LEN; + } else { + processor = skip_variable; + /* If discarding APP0/APP14, use our regular on-the-fly processor. */ + if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14) + processor = get_interesting_appn; + } + + if (marker_code == (int) M_COM) { + marker->process_COM = processor; + marker->length_limit_COM = length_limit; + } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) { + marker->process_APPn[marker_code - (int) M_APP0] = processor; + marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit; + } else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} + +#endif /* SAVE_MARKERS_SUPPORTED */ + + +/* + * Install a special processing method for COM or APPn markers. + */ + +GLOBAL(void) +jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + if (marker_code == (int) M_COM) + marker->process_COM = routine; + else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) + marker->process_APPn[marker_code - (int) M_APP0] = routine; + else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdmaster.c b/third_party/libjpeg/fpdfapi_jdmaster.c new file mode 100644 index 0000000000..dae51e0fd2 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdmaster.c @@ -0,0 +1,560 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG decompressor. + * These routines are concerned with selecting the modules to be executed + * and with determining the number of passes and the work to be done in each + * pass. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_decomp_master pub; /* public fields */ + + int pass_number; /* # of passes completed */ + + boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ + + /* Saved references to initialized quantizer modules, + * in case we need to switch modes. + */ + struct jpeg_color_quantizer * quantizer_1pass; + struct jpeg_color_quantizer * quantizer_2pass; +} my_decomp_master; + +typedef my_decomp_master * my_master_ptr; + + +/* + * Determine whether merged upsample/color conversion should be used. + * CRUCIAL: this must match the actual capabilities of jdmerge.c! + */ + +LOCAL(boolean) +use_merged_upsample (j_decompress_ptr cinfo) +{ +#ifdef UPSAMPLE_MERGING_SUPPORTED + /* Merging is the equivalent of plain box-filter upsampling */ + if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) + return FALSE; + /* jdmerge.c only supports YCC=>RGB color conversion */ + if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || + cinfo->out_color_space != JCS_RGB || + cinfo->out_color_components != RGB_PIXELSIZE) + return FALSE; + /* and it only handles 2h1v or 2h2v sampling ratios */ + if (cinfo->comp_info[0].h_samp_factor != 2 || + cinfo->comp_info[1].h_samp_factor != 1 || + cinfo->comp_info[2].h_samp_factor != 1 || + cinfo->comp_info[0].v_samp_factor > 2 || + cinfo->comp_info[1].v_samp_factor != 1 || + cinfo->comp_info[2].v_samp_factor != 1) + return FALSE; + /* furthermore, it doesn't work if we've scaled the IDCTs differently */ + if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size || + cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size || + cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size) + return FALSE; + /* ??? also need to test for upsample-time rescaling, when & if supported */ + return TRUE; /* by golly, it'll work... */ +#else + return FALSE; +#endif +} + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + * Also note that it may be called before the master module is initialized! + */ + +GLOBAL(void) +jpeg_calc_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; +#endif + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_READY) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + +#ifdef IDCT_SCALING_SUPPORTED + + /* Compute actual output image dimensions and DCT scaling choices. */ + if (cinfo->scale_num * 8 <= cinfo->scale_denom) { + /* Provide 1/8 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 8L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 8L); + cinfo->min_DCT_scaled_size = 1; + } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) { + /* Provide 1/4 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 4L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 4L); + cinfo->min_DCT_scaled_size = 2; + } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) { + /* Provide 1/2 scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 2L); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 2L); + cinfo->min_DCT_scaled_size = 4; + } else { + /* Provide 1/1 scaling */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + cinfo->min_DCT_scaled_size = DCTSIZE; + } + /* In selecting the actual DCT scaling for each component, we try to + * scale up the chroma components via IDCT scaling rather than upsampling. + * This saves time if the upsampler gets to use 1:1 scaling. + * Note this code assumes that the supported DCT scalings are powers of 2. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + int ssize = cinfo->min_DCT_scaled_size; + while (ssize < DCTSIZE && + (compptr->h_samp_factor * ssize * 2 <= + cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) && + (compptr->v_samp_factor * ssize * 2 <= + cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) { + ssize = ssize * 2; + } + compptr->DCT_scaled_size = ssize; + } + + /* Recompute downsampled dimensions of components; + * application needs to know these if using raw downsampled data. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Size in samples, after IDCT scaling */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * + (long) (compptr->h_samp_factor * compptr->DCT_scaled_size), + (long) (cinfo->max_h_samp_factor * DCTSIZE)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * + (long) (compptr->v_samp_factor * compptr->DCT_scaled_size), + (long) (cinfo->max_v_samp_factor * DCTSIZE)); + } + +#else /* !IDCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE, + * and has computed unscaled downsampled_width and downsampled_height. + */ + +#endif /* IDCT_SCALING_SUPPORTED */ + + /* Report number of components in selected colorspace. */ + /* Probably this should be in the color conversion module... */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + break; + case JCS_RGB: +#if RGB_PIXELSIZE != 3 + cinfo->out_color_components = RGB_PIXELSIZE; + break; +#endif /* else share code with YCbCr */ + case JCS_YCbCr: + cinfo->out_color_components = 3; + break; + case JCS_CMYK: + case JCS_YCCK: + cinfo->out_color_components = 4; + break; + default: /* else must be same colorspace as in file */ + cinfo->out_color_components = cinfo->num_components; + break; + } + cinfo->output_components = (cinfo->quantize_colors ? 1 : + cinfo->out_color_components); + + /* See if upsampler will want to emit more than one row at a time */ + if (use_merged_upsample(cinfo)) + cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; + else + cinfo->rec_outbuf_height = 1; +} + + +/* + * Several decompression processes need to range-limit values to the range + * 0..MAXJSAMPLE; the input value may fall somewhat outside this range + * due to noise introduced by quantization, roundoff error, etc. These + * processes are inner loops and need to be as fast as possible. On most + * machines, particularly CPUs with pipelines or instruction prefetch, + * a (subscript-check-less) C table lookup + * x = sample_range_limit[x]; + * is faster than explicit tests + * if (x < 0) x = 0; + * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; + * These processes all use a common table prepared by the routine below. + * + * For most steps we can mathematically guarantee that the initial value + * of x is within MAXJSAMPLE+1 of the legal range, so a table running from + * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial + * limiting step (just after the IDCT), a wildly out-of-range value is + * possible if the input data is corrupt. To avoid any chance of indexing + * off the end of memory and getting a bad-pointer trap, we perform the + * post-IDCT limiting thus: + * x = range_limit[x & MASK]; + * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit + * samples. Under normal circumstances this is more than enough range and + * a correct output will be generated; with bogus input data the mask will + * cause wraparound, and we will safely generate a bogus-but-in-range output. + * For the post-IDCT step, we want to convert the data from signed to unsigned + * representation by adding CENTERJSAMPLE at the same time that we limit it. + * So the post-IDCT limiting table ends up looking like this: + * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, + * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0,1,...,CENTERJSAMPLE-1 + * Negative inputs select values from the upper half of the table after + * masking. + * + * We can save some space by overlapping the start of the post-IDCT table + * with the simpler range limiting table. The post-IDCT table begins at + * sample_range_limit + CENTERJSAMPLE. + * + * Note that the table is allocated in near data space on PCs; it's small + * enough and used often enough to justify this. + */ + +LOCAL(void) +prepare_range_limit_table (j_decompress_ptr cinfo) +/* Allocate and fill in the sample_range_limit table */ +{ + JSAMPLE * table; + int i; + + table = (JSAMPLE *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ + cinfo->sample_range_limit = table; + /* First segment of "simple" table: limit[x] = 0 for x < 0 */ + MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); + /* Main part of "simple" table: limit[x] = x */ + for (i = 0; i <= MAXJSAMPLE; i++) + table[i] = (JSAMPLE) i; + table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ + /* End of simple table, rest of first half of post-IDCT table */ + for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) + table[i] = MAXJSAMPLE; + /* Second half of post-IDCT table */ + MEMZERO(table + (2 * (MAXJSAMPLE+1)), + (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), + cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); +} + + +/* + * Master selection of decompression modules. + * This is done once at jpeg_start_decompress time. We determine + * which modules will be used and give them appropriate initialization calls. + * We also initialize the decompressor input side to begin consuming data. + * + * Since jpeg_read_header has finished, we know what is in the SOF + * and (first) SOS markers. We also have all the application parameter + * settings. + */ + +LOCAL(void) +master_selection (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + boolean use_c_buffer; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* Initialize dimensions and other stuff */ + jpeg_calc_output_dimensions(cinfo); + prepare_range_limit_table(cinfo); + + /* Width of an output scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* Initialize my private state */ + master->pass_number = 0; + master->using_merged_upsample = use_merged_upsample(cinfo); + + /* Color quantizer selection */ + master->quantizer_1pass = NULL; + master->quantizer_2pass = NULL; + /* No mode changes if not using buffered-image mode. */ + if (! cinfo->quantize_colors || ! cinfo->buffered_image) { + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + } + if (cinfo->quantize_colors) { + if (cinfo->raw_data_out) + ERREXIT(cinfo, JERR_NOTIMPL); + /* 2-pass quantizer only works in 3-component color space. */ + if (cinfo->out_color_components != 3) { + cinfo->enable_1pass_quant = TRUE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + cinfo->colormap = NULL; + } else if (cinfo->colormap != NULL) { + cinfo->enable_external_quant = TRUE; + } else if (cinfo->two_pass_quantize) { + cinfo->enable_2pass_quant = TRUE; + } else { + cinfo->enable_1pass_quant = TRUE; + } + + if (cinfo->enable_1pass_quant) { +#ifdef QUANT_1PASS_SUPPORTED + jinit_1pass_quantizer(cinfo); + master->quantizer_1pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + /* We use the 2-pass code to map to external colormaps. */ + if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { +#ifdef QUANT_2PASS_SUPPORTED + jinit_2pass_quantizer(cinfo); + master->quantizer_2pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + /* If both quantizers are initialized, the 2-pass one is left active; + * this is necessary for starting with quantization to an external map. + */ + } + + /* Post-processing: in particular, color conversion first */ + if (! cinfo->raw_data_out) { + if (master->using_merged_upsample) { +#ifdef UPSAMPLE_MERGING_SUPPORTED + jinit_merged_upsampler(cinfo); /* does color conversion too */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + jinit_color_deconverter(cinfo); + jinit_upsampler(cinfo); + } + jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); + } + /* Inverse DCT */ + jinit_inverse_dct(cinfo); + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) { + ERREXIT(cinfo, JERR_ARITH_NOTIMPL); + } else { + if (cinfo->progressive_mode) { +#ifdef D_PROGRESSIVE_SUPPORTED + jinit_phuff_decoder(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else + jinit_huff_decoder(cinfo); + } + + /* Initialize principal buffer controllers. */ + use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; + jinit_d_coef_controller(cinfo, use_c_buffer); + + if (! cinfo->raw_data_out) + jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* If jpeg_start_decompress will read the whole file, initialize + * progress monitoring appropriately. The input step is counted + * as one pass. + */ + if (cinfo->progress != NULL && ! cinfo->buffered_image && + cinfo->inputctl->has_multiple_scans) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); + /* Count the input pass as done */ + master->pass_number++; + } +#endif /* D_MULTISCAN_FILES_SUPPORTED */ +} + + +/* + * Per-pass setup. + * This is called at the beginning of each output pass. We determine which + * modules will be active during this pass and give them appropriate + * start_pass calls. We also set is_dummy_pass to indicate whether this + * is a "real" output pass or a dummy pass for color quantization. + * (In the latter case, jdapistd.c will crank the pass to completion.) + */ + +METHODDEF(void) +prepare_for_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (master->pub.is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Final pass of 2-pass quantization */ + master->pub.is_dummy_pass = FALSE; + (*cinfo->cquantize->start_pass) (cinfo, FALSE); + (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); + (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + if (cinfo->quantize_colors && cinfo->colormap == NULL) { + /* Select new quantization method */ + if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { + cinfo->cquantize = master->quantizer_2pass; + master->pub.is_dummy_pass = TRUE; + } else if (cinfo->enable_1pass_quant) { + cinfo->cquantize = master->quantizer_1pass; + } else { + ERREXIT(cinfo, JERR_MODE_CHANGE); + } + } + (*cinfo->idct->start_pass) (cinfo); + (*cinfo->coef->start_output_pass) (cinfo); + if (! cinfo->raw_data_out) { + if (! master->using_merged_upsample) + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->upsample->start_pass) (cinfo); + if (cinfo->quantize_colors) + (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); + (*cinfo->post->start_pass) (cinfo, + (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + } + } + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->pass_number + + (master->pub.is_dummy_pass ? 2 : 1); + /* In buffered-image mode, we assume one more output pass if EOI not + * yet reached, but no more passes if EOI has been reached. + */ + if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { + cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); + } + } +} + + +/* + * Finish up at end of an output pass. + */ + +METHODDEF(void) +finish_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (cinfo->quantize_colors) + (*cinfo->cquantize->finish_pass) (cinfo); + master->pass_number++; +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Switch to a new external colormap between output passes. + */ + +GLOBAL(void) +jpeg_new_colormap (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_BUFIMAGE) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (cinfo->quantize_colors && cinfo->enable_external_quant && + cinfo->colormap != NULL) { + /* Select 2-pass quantizer for external colormap use */ + cinfo->cquantize = master->quantizer_2pass; + /* Notify quantizer of colormap change */ + (*cinfo->cquantize->new_color_map) (cinfo); + master->pub.is_dummy_pass = FALSE; /* just in case */ + } else + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +/* + * Initialize master decompression control and select active modules. + * This is performed at the start of jpeg_start_decompress. + */ + +GLOBAL(void) +jinit_master_decompress (j_decompress_ptr cinfo) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_decomp_master)); + cinfo->master = (struct jpeg_decomp_master *) master; + master->pub.prepare_for_output_pass = prepare_for_output_pass; + master->pub.finish_output_pass = finish_output_pass; + + master->pub.is_dummy_pass = FALSE; + + master_selection(cinfo); +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdmerge.c b/third_party/libjpeg/fpdfapi_jdmerge.c new file mode 100644 index 0000000000..c229f86aa5 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdmerge.c @@ -0,0 +1,406 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdmerge.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains code for merged upsampling/color conversion. + * + * This file combines functions from jdsample.c and jdcolor.c; + * read those files first to understand what's going on. + * + * When the chroma components are to be upsampled by simple replication + * (ie, box filtering), we can save some work in color conversion by + * calculating all the output pixels corresponding to a pair of chroma + * samples at one time. In the conversion equations + * R = Y + K1 * Cr + * G = Y + K2 * Cb + K3 * Cr + * B = Y + K4 * Cb + * only the Y term varies among the group of pixels corresponding to a pair + * of chroma samples, so the rest of the terms can be calculated just once. + * At typical sampling ratios, this eliminates half or three-quarters of the + * multiplications needed for color conversion. + * + * This file currently provides implementations for the following cases: + * YCbCr => RGB color conversion only. + * Sampling ratios of 2h1v or 2h2v. + * No scaling needed at upsample time. + * Corner-aligned (non-CCIR601) sampling alignment. + * Other special cases could be added, but in most applications these are + * the only common cases. (For uncommon cases we fall back on the more + * general code in jdsample.c and jdcolor.c.) + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef UPSAMPLE_MERGING_SUPPORTED + +#ifdef _FX_MANAGED_CODE_ +#define my_upsampler my_upsampler_m +#endif + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Pointer to routine to do actual upsampling/conversion of one row group */ + JMETHOD(void, upmethod, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf)); + + /* Private state for YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ + + /* For 2:1 vertical sampling, we produce two output rows at a time. + * We need a "spare" row buffer to hold the second output row if the + * application provides just a one-row buffer; we also use the spare + * to discard the dummy last row if the image height is odd. + */ + JSAMPROW spare_row; + boolean spare_full; /* T if spare buffer is occupied */ + + JDIMENSION out_row_width; /* samples per output row */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<<SCALEBITS) + 0.5)) + + +/* + * Initialize tables for YCC->RGB colorspace conversion. + * This is taken directly from jdcolor.c; see that file for more info. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int i; + INT32 x; + SHIFT_TEMPS + + upsample->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + upsample->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.40200 * x */ + upsample->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.77200 * x */ + upsample->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.71414 * x */ + upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x; + /* Cb=>G value is scaled-up -0.34414 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; + } +} + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF(void) +start_pass_merged_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the spare buffer empty */ + upsample->spare_full = FALSE; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * The control routine just handles the row buffering considerations. + */ + +METHODDEF(void) +merged_2v_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +/* 2:1 vertical sampling case: may need a spare row. */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPROW work_ptrs[2]; + JDIMENSION num_rows; /* number of rows returned to caller */ + + if (upsample->spare_full) { + /* If we have a spare row saved from a previous cycle, just return it. */ + jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0, + 1, upsample->out_row_width); + num_rows = 1; + upsample->spare_full = FALSE; + } else { + /* Figure number of rows to return to caller. */ + num_rows = 2; + /* Not more than the distance to the end of the image. */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + /* Create output pointer array for upsampler. */ + work_ptrs[0] = output_buf[*out_row_ctr]; + if (num_rows > 1) { + work_ptrs[1] = output_buf[*out_row_ctr + 1]; + } else { + work_ptrs[1] = upsample->spare_row; + upsample->spare_full = TRUE; + } + /* Now do the upsampling. */ + (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs); + } + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (! upsample->spare_full) + (*in_row_group_ctr)++; +} + + +METHODDEF(void) +merged_1v_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +/* 1:1 vertical sampling case: much easier, never need a spare row. */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Just do the upsampling. */ + (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, + output_buf + *out_row_ctr); + /* Adjust counts */ + (*out_row_ctr)++; + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by the control routines to do + * the actual upsampling/conversion. One row group is processed per call. + * + * Note: since we may be writing directly into application-supplied buffers, + * we have to be honest about the output width; we can't assume the buffer + * has been rounded up to an even width. + */ + + +/* + * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical. + */ + +METHODDEF(void) +h2v1_merged_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + register int y, cred, cgreen, cblue; + int cb, cr; + register JSAMPROW outptr; + JSAMPROW inptr0, inptr1, inptr2; + JDIMENSION col; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + int * Crrtab = upsample->Cr_r_tab; + int * Cbbtab = upsample->Cb_b_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; + SHIFT_TEMPS + + inptr0 = input_buf[0][in_row_group_ctr]; + inptr1 = input_buf[1][in_row_group_ctr]; + inptr2 = input_buf[2][in_row_group_ctr]; + outptr = output_buf[0]; + /* Loop for each pair of output pixels */ + for (col = cinfo->output_width >> 1; col > 0; col--) { + /* Do the chroma part of the calculation */ + cb = GETJSAMPLE(*inptr1++); + cr = GETJSAMPLE(*inptr2++); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + /* Fetch 2 Y values and emit 2 pixels */ + y = GETJSAMPLE(*inptr0++); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr0++); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr += RGB_PIXELSIZE; + } + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + cb = GETJSAMPLE(*inptr1); + cr = GETJSAMPLE(*inptr2); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + y = GETJSAMPLE(*inptr0); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + } +} + + +/* + * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. + */ + +METHODDEF(void) +h2v2_merged_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + register int y, cred, cgreen, cblue; + int cb, cr; + register JSAMPROW outptr0, outptr1; + JSAMPROW inptr00, inptr01, inptr1, inptr2; + JDIMENSION col; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + int * Crrtab = upsample->Cr_r_tab; + int * Cbbtab = upsample->Cb_b_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; + SHIFT_TEMPS + + inptr00 = input_buf[0][in_row_group_ctr*2]; + inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; + inptr1 = input_buf[1][in_row_group_ctr]; + inptr2 = input_buf[2][in_row_group_ctr]; + outptr0 = output_buf[0]; + outptr1 = output_buf[1]; + /* Loop for each group of output pixels */ + for (col = cinfo->output_width >> 1; col > 0; col--) { + /* Do the chroma part of the calculation */ + cb = GETJSAMPLE(*inptr1++); + cr = GETJSAMPLE(*inptr2++); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + /* Fetch 4 Y values and emit 4 pixels */ + y = GETJSAMPLE(*inptr00++); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr00++); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr01++); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr01++); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1 += RGB_PIXELSIZE; + } + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + cb = GETJSAMPLE(*inptr1); + cr = GETJSAMPLE(*inptr2); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + y = GETJSAMPLE(*inptr00); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + y = GETJSAMPLE(*inptr01); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + } +} + + +/* + * Module initialization routine for merged upsampling/color conversion. + * + * NB: this is called under the conditions determined by use_merged_upsample() + * in jdmaster.c. That routine MUST correspond to the actual capabilities + * of this module; no safety checks are made here. + */ + +GLOBAL(void) +jinit_merged_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = (struct jpeg_upsampler *) upsample; + upsample->pub.start_pass = start_pass_merged_upsample; + upsample->pub.need_context_rows = FALSE; + + upsample->out_row_width = cinfo->output_width * cinfo->out_color_components; + + if (cinfo->max_v_samp_factor == 2) { + upsample->pub.upsample = merged_2v_upsample; + upsample->upmethod = h2v2_merged_upsample; + /* Allocate a spare row buffer */ + upsample->spare_row = (JSAMPROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); + } else { + upsample->pub.upsample = merged_1v_upsample; + upsample->upmethod = h2v1_merged_upsample; + /* No spare row needed */ + upsample->spare_row = NULL; + } + + build_ycc_rgb_table(cinfo); +} + +#endif /* UPSAMPLE_MERGING_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdphuff.c b/third_party/libjpeg/fpdfapi_jdphuff.c new file mode 100644 index 0000000000..128e412662 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdphuff.c @@ -0,0 +1,671 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdphuff.c + * + * Copyright (C) 1995-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy decoding routines for progressive JPEG. + * + * Much of the complexity here has to do with supporting input suspension. + * If the data source module demands suspension, we want to be able to back + * up to the start of the current MCU. To do this, we copy state variables + * into local working storage, and update them back to the permanent + * storage only upon successful completion of an MCU. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdhuff.h" /* Declarations shared with jdhuff.c */ + + +#ifdef D_PROGRESSIVE_SUPPORTED + +/* + * Expanded entropy decoder object for progressive Huffman decoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).EOBRUN = (src).EOBRUN, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + /* These fields are loaded into local variables at start of each MCU. + * In case of suspension, we exit WITHOUT updating them. + */ + bitread_perm_state bitstate; /* Bit buffer at start of MCU */ + savable_state saved; /* Other state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; + + d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ +} phuff_entropy_decoder; + +typedef phuff_entropy_decoder * phuff_entropy_ptr; + +/* Forward declarations */ +METHODDEF(boolean) decode_mcu_DC_first JPP((j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(boolean) decode_mcu_AC_first JPP((j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(boolean) decode_mcu_DC_refine JPP((j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); +METHODDEF(boolean) decode_mcu_AC_refine JPP((j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); + + +/* + * Initialize for a Huffman-compressed scan. + */ + +METHODDEF(void) +start_pass_phuff_decoder (j_decompress_ptr cinfo) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + boolean is_DC_band, bad; + int ci, coefi, tbl; + int *coef_bit_ptr; + jpeg_component_info * compptr; + + is_DC_band = (cinfo->Ss == 0); + + /* Validate scan parameters */ + bad = FALSE; + if (is_DC_band) { + if (cinfo->Se != 0) + bad = TRUE; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2) + bad = TRUE; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + bad = TRUE; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Al != cinfo->Ah-1) + bad = TRUE; + } + if (cinfo->Al > 13) /* need not check for < 0 */ + bad = TRUE; + /* Arguably the maximum Al value should be less than 13 for 8-bit precision, + * but the spec doesn't say so, and we try to be liberal about what we + * accept. Note: large Al values could result in out-of-range DC + * coefficients during early scans, leading to bizarre displays due to + * overflows in the IDCT math. But we won't crash. + */ + if (bad) + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int cindex = cinfo->cur_comp_info[ci]->component_index; + coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (is_DC_band) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (is_DC_band) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Make sure requested tables are present, and compute derived tables. + * We may build same derived table more than once, but it's not expensive. + */ + if (is_DC_band) { + if (cinfo->Ah == 0) { /* DC refinement needs no table */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->derived_tbls[tbl]); + } + } else { + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->derived_tbls[tbl]); + /* remember the single active table */ + entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Initialize bitread state variables */ + entropy->bitstate.bits_left = 0; + entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ + entropy->pub.insufficient_data = FALSE; + + /* Initialize private state variables */ + entropy->saved.EOBRUN = 0; + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Figure F.12: extend sign bit. + * On some machines, a shift and add will be faster than a table lookup. + */ + +#ifdef AVOID_TABLES + +#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x)) + +#else + +#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x)) + +static const int extend_test[16] = /* entry n is 2**(n-1) */ + { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, + 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 }; + +static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */ + { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1, + ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1, + ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1, + ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 }; + +#endif /* AVOID_TABLES */ + + +/* + * Check for a restart marker & resynchronize decoder. + * Returns FALSE if must suspend. + */ + +LOCAL(boolean) +process_restart (j_decompress_ptr cinfo) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + int ci; + + /* Throw away any unused bits remaining in bit buffer; */ + /* include any full bytes in next_marker's count of discarded bytes */ + cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; + entropy->bitstate.bits_left = 0; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + return FALSE; + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Re-init EOB run count, too */ + entropy->saved.EOBRUN = 0; + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; + + /* Reset out-of-data flag, unless read_restart_marker left us smack up + * against a marker. In that case we will end up treating the next data + * segment as empty, and we can avoid producing bogus output pixels by + * leaving the flag set. + */ + if (cinfo->unread_marker == 0) + entropy->pub.insufficient_data = FALSE; + + return TRUE; +} + + +/* + * Huffman MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * Huffman-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + * + * We return FALSE if data source requested suspension. In that case no + * changes have been made to permanent state. (Exception: some output + * coefficients may already have been assigned. This is harmless for + * spectral selection, since we'll just re-assign them on the next call. + * Successive approximation AC refinement has to be more careful, however.) + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + int Al = cinfo->Al; + register int s, r; + int blkn, ci; + JBLOCKROW block; + BITREAD_STATE_VARS; + savable_state state; + d_derived_tbl * tbl; + jpeg_component_info * compptr; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->pub.insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + tbl = entropy->derived_tbls[compptr->dc_tbl_no]; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + HUFF_DECODE(s, br_state, tbl, return FALSE, label1); + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + + /* Convert DC difference to actual value, update last_dc_val */ + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (s << Al); + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + int Se = cinfo->Se; + int Al = cinfo->Al; + register int s, k, r; + unsigned int EOBRUN; + JBLOCKROW block; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->pub.insufficient_data) { + + /* Load up working state. + * We can avoid loading/saving bitread state if in an EOB run. + */ + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + + if (EOBRUN > 0) /* if it's a band of zeroes... */ + EOBRUN--; /* ...process it now (we do nothing) */ + else { + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + for (k = cinfo->Ss; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, return FALSE, label2); + r = s >> 4; + s &= 15; + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al); + } else { + if (r == 15) { /* ZRL */ + k += 15; /* skip 15 zeroes in band */ + } else { /* EOBr, run length is 2^r + appended bits */ + EOBRUN = 1 << r; + if (r) { /* EOBr, r > 0 */ + CHECK_BIT_BUFFER(br_state, r, return FALSE); + r = GET_BITS(r); + EOBRUN += r; + } + EOBRUN--; /* this band is processed at this moment */ + break; /* force end-of-band */ + } + } + } + + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + } + + /* Completed MCU, so update state */ + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, although the spec + * is not very clear on the point. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + int blkn; + JBLOCKROW block; + BITREAD_STATE_VARS; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* Not worth the cycles to check insufficient_data here, + * since we will not change the data anyway if we read zeroes. + */ + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + + /* Encoded data is simply the next bit of the two's-complement DC value */ + CHECK_BIT_BUFFER(br_state, 1, return FALSE); + if (GET_BITS(1)) + (*block)[0] |= p1; + /* Note: since we use |=, repeating the assignment later is safe */ + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy; + int Se = cinfo->Se; + int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + int m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ + register int s, k, r; + unsigned int EOBRUN; + JBLOCKROW block; + JCOEFPTR thiscoef; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + int num_newnz; + int newnz_pos[DCTSIZE2]; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, don't modify the MCU. + */ + if (! entropy->pub.insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + /* If we are forced to suspend, we must undo the assignments to any newly + * nonzero coefficients in the block, because otherwise we'd get confused + * next time about which coefficients were already nonzero. + * But we need not undo addition of bits to already-nonzero coefficients; + * instead, we can test the current bit to see if we already did it. + */ + num_newnz = 0; + + /* initialize coefficient loop counter to start of band */ + k = cinfo->Ss; + + if (EOBRUN == 0) { + for (; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, goto undoit, label3); + r = s >> 4; + s &= 15; + if (s) { + if (s != 1) /* size of new coef should always be 1 */ + WARNMS(cinfo, JWRN_HUFF_BAD_CODE); + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) + s = p1; /* newly nonzero coef is positive */ + else + s = m1; /* newly nonzero coef is negative */ + } else { + if (r != 15) { + EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ + if (r) { + CHECK_BIT_BUFFER(br_state, r, goto undoit); + r = GET_BITS(r); + EOBRUN += r; + } + break; /* rest of block is handled by EOB logic */ + } + /* note s = 0 for processing ZRL */ + } + /* Advance over already-nonzero coefs and r still-zero coefs, + * appending correction bits to the nonzeroes. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + jpeg_natural_order[k]; + if (*thiscoef != 0) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } else { + if (--r < 0) + break; /* reached target zero coefficient */ + } + k++; + } while (k <= Se); + if (s) { + int pos = jpeg_natural_order[k]; + /* Output newly nonzero coefficient */ + (*block)[pos] = (JCOEF) s; + /* Remember its position in case we have to suspend */ + newnz_pos[num_newnz++] = pos; + } + } + } + + if (EOBRUN > 0) { + /* Scan any remaining coefficient positions after the end-of-band + * (the last newly nonzero coefficient, if any). Append a correction + * bit to each already-nonzero coefficient. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + for (; k <= Se; k++) { + thiscoef = *block + jpeg_natural_order[k]; + if (*thiscoef != 0) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } + } + /* Count one block completed in EOB run */ + EOBRUN--; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; + +undoit: + /* Re-zero any output coefficients that we made newly nonzero */ + while (num_newnz > 0) + (*block)[newnz_pos[--num_newnz]] = 0; + + return FALSE; +} + + +/* + * Module initialization routine for progressive Huffman entropy decoding. + */ + +GLOBAL(void) +jinit_phuff_decoder (j_decompress_ptr cinfo) +{ + phuff_entropy_ptr entropy; + int *coef_bit_ptr; + int ci, i; + + entropy = (phuff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(phuff_entropy_decoder)); + cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; + entropy->pub.start_pass = start_pass_phuff_decoder; + + /* Mark derived tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->derived_tbls[i] = NULL; + } + + /* Create progression status table */ + cinfo->coef_bits = (int (*)[DCTSIZE2]) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components*DCTSIZE2*SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; +} + +#endif /* D_PROGRESSIVE_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdpostct.c b/third_party/libjpeg/fpdfapi_jdpostct.c new file mode 100644 index 0000000000..13b1b1bb0c --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdpostct.c @@ -0,0 +1,293 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdpostct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the decompression postprocessing controller. + * This controller manages the upsampling, color conversion, and color + * quantization/reduction steps; specifically, it controls the buffering + * between upsample/color conversion and color quantization/reduction. + * + * If no color quantization/reduction is required, then this module has no + * work to do, and it just hands off to the upsample/color conversion code. + * An integrated upsample/convert/quantize process would replace this module + * entirely. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_post_controller pub; /* public fields */ + + /* Color quantization source buffer: this holds output data from + * the upsample/color conversion step to be passed to the quantizer. + * For two-pass color quantization, we need a full-image buffer; + * for one-pass operation, a strip buffer is sufficient. + */ + jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ + JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ + JDIMENSION strip_height; /* buffer size in rows */ + /* for two-pass mode only: */ + JDIMENSION starting_row; /* row # of first row in current strip */ + JDIMENSION next_row; /* index of next row to fill/empty in strip */ +} my_post_controller; + +typedef my_post_controller * my_post_ptr; + + +/* Forward declarations */ +METHODDEF(void) post_process_1pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF(void) post_process_prepass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +METHODDEF(void) post_process_2pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->quantize_colors) { + /* Single-pass processing with color quantization. */ + post->pub.post_process_data = post_process_1pass; + /* We could be doing buffered-image output before starting a 2-pass + * color quantization; in that case, jinit_d_post_controller did not + * allocate a strip buffer. Use the virtual-array buffer as workspace. + */ + if (post->buffer == NULL) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + (JDIMENSION) 0, post->strip_height, TRUE); + } + } else { + /* For single-pass processing without color quantization, + * I have no work to do; just call the upsampler directly. + */ + post->pub.post_process_data = cinfo->upsample->upsample; + } + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_SAVE_AND_PASS: + /* First pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_prepass; + break; + case JBUF_CRANK_DEST: + /* Second pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_2pass; + break; +#endif /* QUANT_2PASS_SUPPORTED */ + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } + post->starting_row = post->next_row = 0; +} + + +/* + * Process some data in the one-pass (strip buffer) case. + * This is used for color precision reduction as well as one-pass quantization. + */ + +METHODDEF(void) +post_process_1pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Fill the buffer, but not more than what we can dump out in one go. */ + /* Note we rely on the upsampler to detect bottom of image. */ + max_rows = out_rows_avail - *out_row_ctr; + if (max_rows > post->strip_height) + max_rows = post->strip_height; + num_rows = 0; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &num_rows, max_rows); + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer, output_buf + *out_row_ctr, (int) num_rows); + *out_row_ctr += num_rows; +} + + +#ifdef QUANT_2PASS_SUPPORTED + +/* + * Process some data in the first pass of 2-pass quantization. + */ + +METHODDEF(void) +post_process_prepass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION old_next_row, num_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, TRUE); + } + + /* Upsample some data (up to a strip height's worth). */ + old_next_row = post->next_row; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &post->next_row, post->strip_height); + + /* Allow quantizer to scan new data. No data is emitted, */ + /* but we advance out_row_ctr so outer loop can tell when we're done. */ + if (post->next_row > old_next_row) { + num_rows = post->next_row - old_next_row; + (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, + (JSAMPARRAY) NULL, (int) num_rows); + *out_row_ctr += num_rows; + } + + /* Advance if we filled the strip. */ + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + + +/* + * Process some data in the second pass of 2-pass quantization. + */ + +METHODDEF(void) +post_process_2pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, FALSE); + } + + /* Determine number of rows to emit. */ + num_rows = post->strip_height - post->next_row; /* available in strip */ + max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ + if (num_rows > max_rows) + num_rows = max_rows; + /* We have to check bottom of image here, can't depend on upsampler. */ + max_rows = cinfo->output_height - post->starting_row; + if (num_rows > max_rows) + num_rows = max_rows; + + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer + post->next_row, output_buf + *out_row_ctr, + (int) num_rows); + *out_row_ctr += num_rows; + + /* Advance if we filled the strip. */ + post->next_row += num_rows; + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize postprocessing controller. + */ + +GLOBAL(void) +jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_post_ptr post; + + post = (my_post_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_post_controller)); + cinfo->post = (struct jpeg_d_post_controller *) post; + post->pub.start_pass = start_pass_dpost; + post->whole_image = NULL; /* flag for no virtual arrays */ + post->buffer = NULL; /* flag for no strip buffer */ + + /* Create the quantization buffer, if needed */ + if (cinfo->quantize_colors) { + /* The buffer strip height is max_v_samp_factor, which is typically + * an efficient number of rows for upsampling to return. + * (In the presence of output rescaling, we might want to be smarter?) + */ + post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; + if (need_full_buffer) { + /* Two-pass color quantization: need full-image storage. */ + /* We round up the number of rows to a multiple of the strip height. */ +#ifdef QUANT_2PASS_SUPPORTED + post->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + cinfo->output_width * cinfo->out_color_components, + (JDIMENSION) jround_up((long) cinfo->output_height, + (long) post->strip_height), + post->strip_height); +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + /* One-pass color quantization: just make a strip buffer. */ + post->buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width * cinfo->out_color_components, + post->strip_height); + } + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdsample.c b/third_party/libjpeg/fpdfapi_jdsample.c new file mode 100644 index 0000000000..da9c38ce38 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdsample.c @@ -0,0 +1,481 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdsample.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains upsampling routines. + * + * Upsampling input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * sample rows of each component. Upsampling will normally produce + * max_v_samp_factor pixel rows from each row group (but this could vary + * if the upsampler is applying a scale factor of its own). + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to upsample a single component */ +typedef JMETHOD(void, upsample1_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Color conversion buffer. When using separate upsampling and color + * conversion steps, this buffer holds one upsampled row group until it + * has been color converted and output. + * Note: we do not allocate any storage for component(s) which are full-size, + * ie do not need rescaling. The corresponding entry of color_buf[] is + * simply set to point to the input data array, thereby avoiding copying. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + /* Per-component upsampling method pointers */ + upsample1_ptr methods[MAX_COMPONENTS]; + + int next_row_out; /* counts rows emitted from color_buf */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ + + /* Height of an input row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_expand need not + * recompute them each time. They are unused for other upsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF(void) +start_pass_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the conversion buffer empty */ + upsample->next_row_out = cinfo->max_v_samp_factor; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * In this version we upsample each component independently. + * We upsample one row group into the conversion buffer, then apply + * color conversion a row at a time. + */ + +METHODDEF(void) +sep_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int ci; + jpeg_component_info * compptr; + JDIMENSION num_rows; + + /* Fill the conversion buffer, if it's empty */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Invoke per-component upsample method. Notice we pass a POINTER + * to color_buf[ci], so that fullsize_upsample can change it. + */ + (*upsample->methods[ci]) (cinfo, compptr, + input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), + upsample->color_buf + ci); + } + upsample->next_row_out = 0; + } + + /* Color-convert and emit rows */ + + /* How many we have in the buffer: */ + num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); + /* Not more than the distance to the end of the image. Need this test + * in case the image height is not a multiple of max_v_samp_factor: + */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + + (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, + (JDIMENSION) upsample->next_row_out, + output_buf + *out_row_ctr, + (int) num_rows); + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + upsample->next_row_out += num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by sep_upsample to upsample pixel values + * of a single component. One row group is processed per call. + */ + + +/* + * For full-size components, we just make color_buf[ci] point at the + * input buffer, and thus avoid copying any data. Note that this is + * safe only because sep_upsample doesn't declare the input row group + * "consumed" until we are done color converting and emitting it. + */ + +METHODDEF(void) +fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = input_data; +} + + +/* + * This is a no-op version used for "uninteresting" components. + * These components will not be referenced by color conversion. + */ + +METHODDEF(void) +noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = NULL; /* safety check */ +} + + +/* + * This version handles any integral sampling ratios. + * This is not used for typical JPEG files, so it need not be fast. + * Nor, for that matter, is it particularly accurate: the algorithm is + * simple replication of the input pixel onto the corresponding output + * pixels. The hi-falutin sampling literature refers to this as a + * "box filter". A box filter tends to introduce visible artifacts, + * so if you are actually going to use 3:1 or 4:1 sampling ratios + * you would be well advised to improve this code. + */ + +METHODDEF(void) +int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + register int h; + JSAMPROW outend; + int h_expand, v_expand; + int inrow, outrow; + + h_expand = upsample->h_expand[compptr->component_index]; + v_expand = upsample->v_expand[compptr->component_index]; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + /* Generate one output row with proper horizontal expansion */ + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + for (h = h_expand; h > 0; h--) { + *outptr++ = invalue; + } + } + /* Generate any additional output rows by duplicating the first one */ + if (v_expand > 1) { + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + v_expand-1, cinfo->output_width); + } + inrow++; + outrow += v_expand; + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. + * It's still a box filter. + */ + +METHODDEF(void) +h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int inrow; + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + inptr = input_data[inrow]; + outptr = output_data[inrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. + * It's still a box filter. + */ + +METHODDEF(void) +h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int inrow, outrow; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + 1, cinfo->output_width); + inrow++; + outrow += 2; + } +} + + +/* + * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical. + * + * The upsampling algorithm is linear interpolation between pixel centers, + * also known as a "triangle filter". This is a good compromise between + * speed and visual quality. The centers of the output pixels are 1/4 and 3/4 + * of the way between input pixel centers. + * + * A note about the "bias" calculations: when rounding fractional values to + * integer, we do not want to always round 0.5 up to the next integer. + * If we did that, we'd introduce a noticeable bias towards larger values. + * Instead, this code is arranged so that 0.5 will be rounded up or down at + * alternate pixel locations (a simple ordered dither pattern). + */ + +METHODDEF(void) +h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register int invalue; + register JDIMENSION colctr; + int inrow; + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + inptr = input_data[inrow]; + outptr = output_data[inrow]; + /* Special case for first column */ + invalue = GETJSAMPLE(*inptr++); + *outptr++ = (JSAMPLE) invalue; + *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2); + + for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { + /* General case: 3/4 * nearer pixel + 1/4 * further pixel */ + invalue = GETJSAMPLE(*inptr++) * 3; + *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2); + *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2); + } + + /* Special case for last column */ + invalue = GETJSAMPLE(*inptr); + *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2); + *outptr++ = (JSAMPLE) invalue; + } +} + + +/* + * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical. + * Again a triangle filter; see comments for h2v1 case, above. + * + * It is OK for us to reference the adjacent input rows because we demanded + * context from the main buffer controller (see initialization code). + */ + +METHODDEF(void) +h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr0, inptr1, outptr; +#if BITS_IN_JSAMPLE == 8 + register int thiscolsum, lastcolsum, nextcolsum; +#else + register INT32 thiscolsum, lastcolsum, nextcolsum; +#endif + register JDIMENSION colctr; + int inrow, outrow, v; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + for (v = 0; v < 2; v++) { + /* inptr0 points to nearest input row, inptr1 points to next nearest */ + inptr0 = input_data[inrow]; + if (v == 0) /* next nearest is row above */ + inptr1 = input_data[inrow-1]; + else /* next nearest is row below */ + inptr1 = input_data[inrow+1]; + outptr = output_data[outrow++]; + + /* Special case for first column */ + thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); + nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); + *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4); + *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); + lastcolsum = thiscolsum; thiscolsum = nextcolsum; + + for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) { + /* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */ + /* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */ + nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++); + *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); + *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4); + lastcolsum = thiscolsum; thiscolsum = nextcolsum; + } + + /* Special case for last column */ + *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4); + *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4); + } + inrow++; + } +} + + +/* + * Module initialization routine for upsampling. + */ + +GLOBAL(void) +jinit_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + int ci; + jpeg_component_info * compptr; + boolean need_buffer, do_fancy; + int h_in_group, v_in_group, h_out_group, v_out_group; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = (struct jpeg_upsampler *) upsample; + upsample->pub.start_pass = start_pass_upsample; + upsample->pub.upsample = sep_upsample; + upsample->pub.need_context_rows = FALSE; /* until we find out differently */ + + if (cinfo->CCIR601_sampling) /* this isn't supported */ + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1, + * so don't ask for it. + */ + do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1; + + /* Verify we can handle the sampling factors, select per-component methods, + * and create storage as needed. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Compute size of an "input group" after IDCT scaling. This many samples + * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. + */ + h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; + v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) / + cinfo->min_DCT_scaled_size; + h_out_group = cinfo->max_h_samp_factor; + v_out_group = cinfo->max_v_samp_factor; + upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ + need_buffer = TRUE; + if (! compptr->component_needed) { + /* Don't bother to upsample an uninteresting component. */ + upsample->methods[ci] = noop_upsample; + need_buffer = FALSE; + } else if (h_in_group == h_out_group && v_in_group == v_out_group) { + /* Fullsize components can be processed without any work. */ + upsample->methods[ci] = fullsize_upsample; + need_buffer = FALSE; + } else if (h_in_group * 2 == h_out_group && + v_in_group == v_out_group) { + /* Special cases for 2h1v upsampling */ + if (do_fancy && compptr->downsampled_width > 2) + upsample->methods[ci] = h2v1_fancy_upsample; + else + upsample->methods[ci] = h2v1_upsample; + } else if (h_in_group * 2 == h_out_group && + v_in_group * 2 == v_out_group) { + /* Special cases for 2h2v upsampling */ + if (do_fancy && compptr->downsampled_width > 2) { + upsample->methods[ci] = h2v2_fancy_upsample; + upsample->pub.need_context_rows = TRUE; + } else + upsample->methods[ci] = h2v2_upsample; + } else if ((h_out_group % h_in_group) == 0 && + (v_out_group % v_in_group) == 0) { + /* Generic integral-factors upsampling method */ + upsample->methods[ci] = int_upsample; + upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); + upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + if (need_buffer) { + upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) jround_up((long) cinfo->output_width, + (long) cinfo->max_h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jdtrans.c b/third_party/libjpeg/fpdfapi_jdtrans.c new file mode 100644 index 0000000000..ae44f36043 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jdtrans.c @@ -0,0 +1,146 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jdtrans.c + * + * Copyright (C) 1995-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding decompression, + * that is, reading raw DCT coefficient arrays from an input JPEG file. + * The routines in jdapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo)); + + +/* + * Read the coefficient arrays from a JPEG file. + * jpeg_read_header must be completed before calling this. + * + * The entire image is read into a set of virtual coefficient-block arrays, + * one per component. The return value is a pointer to the array of + * virtual-array descriptors. These can be manipulated directly via the + * JPEG memory manager, or handed off to jpeg_write_coefficients(). + * To release the memory occupied by the virtual arrays, call + * jpeg_finish_decompress() when done with the data. + * + * An alternative usage is to simply obtain access to the coefficient arrays + * during a buffered-image-mode decompression operation. This is allowed + * after any jpeg_finish_output() call. The arrays can be accessed until + * jpeg_finish_decompress() is called. (Note that any call to the library + * may reposition the arrays, so don't rely on access_virt_barray() results + * to stay valid across library calls.) + * + * Returns NULL if suspended. This case need be checked only if + * a suspending data source is used. + */ + +GLOBAL(jvirt_barray_ptr *) +jpeg_read_coefficients (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize active modules */ + transdecode_master_selection(cinfo); + cinfo->global_state = DSTATE_RDCOEFS; + } + if (cinfo->global_state == DSTATE_RDCOEFS) { + /* Absorb whole file into the coef buffer */ + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return NULL; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* startup underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } + /* Set state so that jpeg_finish_decompress does the right thing */ + cinfo->global_state = DSTATE_STOPPING; + } + /* At this point we should be in state DSTATE_STOPPING if being used + * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access + * to the coefficients during a full buffered-image-mode decompression. + */ + if ((cinfo->global_state == DSTATE_STOPPING || + cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) { + return cinfo->coef->coef_arrays; + } + /* Oops, improper usage */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return NULL; /* keep compiler happy */ +} + + +/* + * Master selection of decompression modules for transcoding. + * This substitutes for jdmaster.c's initialization of the full decompressor. + */ + +LOCAL(void) +transdecode_master_selection (j_decompress_ptr cinfo) +{ + /* This is effectively a buffered-image operation. */ + cinfo->buffered_image = TRUE; + + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) { + ERREXIT(cinfo, JERR_ARITH_NOTIMPL); + } else { + if (cinfo->progressive_mode) { +#ifdef D_PROGRESSIVE_SUPPORTED + jinit_phuff_decoder(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else + jinit_huff_decoder(cinfo); + } + + /* Always get a full-image coefficient buffer. */ + jinit_d_coef_controller(cinfo, TRUE); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + + /* Initialize progress monitoring. */ + if (cinfo->progress != NULL) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else if (cinfo->inputctl->has_multiple_scans) { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } else { + nscans = 1; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = 1; + } +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jerror.c b/third_party/libjpeg/fpdfapi_jerror.c new file mode 100644 index 0000000000..282f889ebd --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jerror.c @@ -0,0 +1,242 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jerror.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains simple error-reporting and trace-message routines. + * These are suitable for Unix-like systems and others where writing to + * stderr is the right thing to do. Many applications will want to replace + * some or all of these routines. + * + * These routines are used by both the compression and decompression code. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jversion.h" +#include "jerror.h" + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif + + +/* + * Create the message string table. + * We do this from the master message list in jerror.h by re-reading + * jerror.h with a suitable definition for macro JMESSAGE. + * The message table is made an external symbol just in case any applications + * want to refer to it directly. + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_message_table jMsgTable +#endif + +#define JMESSAGE(code,string) string , + +const char * const jpeg_std_message_table[] = { +#include "jerror.h" + NULL +}; + + +/* + * Error exit handler: must not return to caller. + * + * Applications may override this if they want to get control back after + * an error. Typically one would longjmp somewhere instead of exiting. + * The setjmp buffer can be made a private field within an expanded error + * handler object. Note that the info needed to generate an error message + * is stored in the error object, so you can generate the message now or + * later, at your convenience. + * You should make sure that the JPEG object is cleaned up (with jpeg_abort + * or jpeg_destroy) at some point. + */ + +METHODDEF(void) +error_exit (j_common_ptr cinfo) +{ + /* Always display the message */ + (*cinfo->err->output_message) (cinfo); + + /* Let the memory manager delete any temp files before we die */ + jpeg_destroy(cinfo); + +// exit(EXIT_FAILURE); +} + + +/* + * Actual output of an error or trace message. + * Applications may override this method to send JPEG messages somewhere + * other than stderr. + * + * On Windows, printing to stderr is generally completely useless, + * so we provide optional code to produce an error-dialog popup. + * Most Windows applications will still prefer to override this routine, + * but if they don't, it'll do something at least marginally useful. + * + * NOTE: to use the library in an environment that doesn't support the + * C stdio library, you may have to delete the call to fprintf() entirely, + * not just not use this routine. + */ + +METHODDEF(void) +output_message (j_common_ptr cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + + /* Create the message */ + (*cinfo->err->format_message) (cinfo, buffer); + + /* Send it to stderr, adding a newline */ + FXSYS_fprintf(stderr, "%s\n", buffer); +} + + +/* + * Decide whether to emit a trace or warning message. + * msg_level is one of: + * -1: recoverable corrupt-data warning, may want to abort. + * 0: important advisory messages (always display to user). + * 1: first level of tracing detail. + * 2,3,...: successively more detailed tracing messages. + * An application might override this method if it wanted to abort on warnings + * or change the policy about which messages to display. + */ + +METHODDEF(void) +emit_message (j_common_ptr cinfo, int msg_level) +{ + struct jpeg_error_mgr * err = cinfo->err; + + if (msg_level < 0) { + /* It's a warning message. Since corrupt files may generate many warnings, + * the policy implemented here is to show only the first warning, + * unless trace_level >= 3. + */ + if (err->num_warnings == 0 || err->trace_level >= 3) + (*err->output_message) (cinfo); + /* Always count warnings in num_warnings. */ + err->num_warnings++; + } else { + /* It's a trace message. Show it if trace_level >= msg_level. */ + if (err->trace_level >= msg_level) + (*err->output_message) (cinfo); + } +} + + +/* + * Format a message string for the most recent JPEG error or message. + * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX + * characters. Note that no '\n' character is added to the string. + * Few applications should need to override this method. + */ + +METHODDEF(void) +format_message (j_common_ptr cinfo, char * buffer) +{ +#if 0 /* XYQ */ + struct jpeg_error_mgr * err = cinfo->err; + int msg_code = err->msg_code; + const char * msgtext = NULL; + const char * msgptr; + char ch; + boolean isstring; + + /* Look up message string in proper table */ + if (msg_code > 0 && msg_code <= err->last_jpeg_message) { + msgtext = err->jpeg_message_table[msg_code]; + } else if (err->addon_message_table != NULL && + msg_code >= err->first_addon_message && + msg_code <= err->last_addon_message) { + msgtext = err->addon_message_table[msg_code - err->first_addon_message]; + } + + /* Defend against bogus message number */ + if (msgtext == NULL) { + err->msg_parm.i[0] = msg_code; + msgtext = err->jpeg_message_table[0]; + } + + /* Check for string parameter, as indicated by %s in the message text */ + isstring = FALSE; + msgptr = msgtext; + while ((ch = *msgptr++) != '\0') { + if (ch == '%') { + if (*msgptr == 's') isstring = TRUE; + break; + } + } + + /* Format the message into the passed buffer */ + if (isstring) + sprintf(buffer, msgtext, err->msg_parm.s); + else + sprintf(buffer, msgtext, + err->msg_parm.i[0], err->msg_parm.i[1], + err->msg_parm.i[2], err->msg_parm.i[3], + err->msg_parm.i[4], err->msg_parm.i[5], + err->msg_parm.i[6], err->msg_parm.i[7]); +#endif +} + + +/* + * Reset error state variables at start of a new image. + * This is called during compression startup to reset trace/error + * processing to default state, without losing any application-specific + * method pointers. An application might possibly want to override + * this method if it has additional error processing state. + */ + +METHODDEF(void) +reset_error_mgr (j_common_ptr cinfo) +{ + cinfo->err->num_warnings = 0; + /* trace_level is not reset since it is an application-supplied parameter */ + cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ +} + + +/* + * Fill in the standard error-handling methods in a jpeg_error_mgr object. + * Typical call is: + * struct jpeg_compress_struct cinfo; + * struct jpeg_error_mgr err; + * + * cinfo.err = jpeg_std_error(&err); + * after which the application may override some of the methods. + */ + +GLOBAL(struct jpeg_error_mgr *) +jpeg_std_error (struct jpeg_error_mgr * err) +{ + err->error_exit = error_exit; + err->emit_message = emit_message; + err->output_message = output_message; + err->format_message = format_message; + err->reset_error_mgr = reset_error_mgr; + + err->trace_level = 0; /* default = no tracing */ + err->num_warnings = 0; /* no warnings emitted yet */ + err->msg_code = 0; /* may be useful as a flag for "no error" */ + + /* Initialize message table pointers */ + err->jpeg_message_table = jpeg_std_message_table; + err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; + + err->addon_message_table = NULL; + err->first_addon_message = 0; /* for safety */ + err->last_addon_message = 0; + + return err; +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jfdctfst.c b/third_party/libjpeg/fpdfapi_jfdctfst.c new file mode 100644 index 0000000000..b978b468d7 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jfdctfst.c @@ -0,0 +1,227 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jfdctfst.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a fast, not so accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with fixed-point math, + * accuracy is lost due to imprecise representation of the scaled + * quantization values. The smaller the quantization table entry, the less + * precise the scaled value, so this implementation does worse with high- + * quality-setting files than with low-quality ones. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_IFAST_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling decisions are generally the same as in the LL&M algorithm; + * see jfdctint.c for more details. However, we choose to descale + * (right shift) multiplication products as soon as they are formed, + * rather than carrying additional fractional bits into subsequent additions. + * This compromises accuracy slightly, but it lets us save a few shifts. + * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) + * everywhere except in the multiplications proper; this saves a good deal + * of work on 16-bit-int machines. + * + * Again to save a few shifts, the intermediate results between pass 1 and + * pass 2 are not upscaled, but are represented only to integral precision. + * + * A final compromise is to represent the multiplicative constants to only + * 8 fractional bits, rather than 13. This saves some shifting work on some + * machines, and may also reduce the cost of multiplication (since there + * are fewer one-bits in the constants). + */ + +#define CONST_BITS 8 + + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 8 +#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */ +#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */ +#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */ +#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */ +#else +#define FIX_0_382683433 FIX(0.382683433) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_707106781 FIX(0.707106781) +#define FIX_1_306562965 FIX(1.306562965) +#endif + + +/* We can gain a little more speed, with a further compromise in accuracy, + * by omitting the addition in a descaling shift. This yields an incorrectly + * rounded result half the time... + */ + +#ifndef USE_ACCURATE_ROUNDING +#undef DESCALE +#define DESCALE(x,n) RIGHT_SHIFT(x, n) +#endif + + +/* Multiply a DCTELEM variable by an INT32 constant, and immediately + * descale to yield a DCTELEM result. + */ + +#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_ifast (DCTELEM * data) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + DCTELEM tmp10, tmp11, tmp12, tmp13; + DCTELEM z1, z2, z3, z4, z5, z11, z13; + DCTELEM *dataptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[0] + dataptr[7]; + tmp7 = dataptr[0] - dataptr[7]; + tmp1 = dataptr[1] + dataptr[6]; + tmp6 = dataptr[1] - dataptr[6]; + tmp2 = dataptr[2] + dataptr[5]; + tmp5 = dataptr[2] - dataptr[5]; + tmp3 = dataptr[3] + dataptr[4]; + tmp4 = dataptr[3] - dataptr[4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[0] = tmp10 + tmp11; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ + z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ + z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ + z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[DCTSIZE*4] = tmp10 - tmp11; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ + dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ + dataptr[DCTSIZE*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ + z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ + z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ + z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ + dataptr[DCTSIZE*3] = z13 - z2; + dataptr[DCTSIZE*1] = z11 + z4; + dataptr[DCTSIZE*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_IFAST_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jfdctint.c b/third_party/libjpeg/fpdfapi_jfdctint.c new file mode 100644 index 0000000000..488505b062 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jfdctint.c @@ -0,0 +1,286 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jfdctint.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D DCT step produces outputs which are a factor of sqrt(N) + * larger than the true DCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D DCT, + * because the y0 and y4 outputs need not be divided by sqrt(N). + * In the IJG code, this factor of 8 is removed by the quantization step + * (in jcdctmgr.c), NOT in this module. + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (For 12-bit sample data, the intermediate + * array is INT32 anyway.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_islow (DCTELEM * data) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3, z4, z5; + DCTELEM *dataptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[0] + dataptr[7]; + tmp7 = dataptr[0] - dataptr[7]; + tmp1 = dataptr[1] + dataptr[6]; + tmp6 = dataptr[1] - dataptr[6]; + tmp2 = dataptr[2] + dataptr[5]; + tmp5 = dataptr[2] - dataptr[5]; + tmp3 = dataptr[3] + dataptr[4]; + tmp4 = dataptr[3] - dataptr[4]; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp10 = tmp0 + tmp3; + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[0] = (DCTELEM) ((tmp10 + tmp11) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865), + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065), + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * cK represents cos(K*pi/16). + * i0..i3 in the paper are tmp4..tmp7 here. + */ + + z1 = tmp4 + tmp7; + z2 = tmp5 + tmp6; + z3 = tmp4 + tmp6; + z4 = tmp5 + tmp7; + z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ + + tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + + z3 += z5; + z4 += z5; + + dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS); + dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp10 = tmp0 + tmp3; + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865), + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065), + CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * cK represents cos(K*pi/16). + * i0..i3 in the paper are tmp4..tmp7 here. + */ + + z1 = tmp4 + tmp7; + z2 = tmp5 + tmp6; + z3 = tmp4 + tmp6; + z4 = tmp5 + tmp7; + z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ + + tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + + z3 += z5; + z4 += z5; + + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_ISLOW_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jidctfst.c b/third_party/libjpeg/fpdfapi_jidctfst.c new file mode 100644 index 0000000000..26a8f68a27 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jidctfst.c @@ -0,0 +1,371 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jidctfst.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a fast, not so accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with fixed-point math, + * accuracy is lost due to imprecise representation of the scaled + * quantization values. The smaller the quantization table entry, the less + * precise the scaled value, so this implementation does worse with high- + * quality-setting files than with low-quality ones. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_IFAST_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling decisions are generally the same as in the LL&M algorithm; + * see jidctint.c for more details. However, we choose to descale + * (right shift) multiplication products as soon as they are formed, + * rather than carrying additional fractional bits into subsequent additions. + * This compromises accuracy slightly, but it lets us save a few shifts. + * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) + * everywhere except in the multiplications proper; this saves a good deal + * of work on 16-bit-int machines. + * + * The dequantized coefficients are not integers because the AA&N scaling + * factors have been incorporated. We represent them scaled up by PASS1_BITS, + * so that the first and second IDCT rounds have the same input scaling. + * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to + * avoid a descaling shift; this compromises accuracy rather drastically + * for small quantization table entries, but it saves a lot of shifts. + * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway, + * so we use a much larger scaling factor to preserve accuracy. + * + * A final compromise is to represent the multiplicative constants to only + * 8 fractional bits, rather than 13. This saves some shifting work on some + * machines, and may also reduce the cost of multiplication (since there + * are fewer one-bits in the constants). + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 8 +#define PASS1_BITS 2 +#else +#define CONST_BITS 8 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 8 +#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */ +#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */ +#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */ +#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */ +#else +#define FIX_1_082392200 FIX(1.082392200) +#define FIX_1_414213562 FIX(1.414213562) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_2_613125930 FIX(2.613125930) +#endif + + +/* We can gain a little more speed, with a further compromise in accuracy, + * by omitting the addition in a descaling shift. This yields an incorrectly + * rounded result half the time... + */ + +#ifndef USE_ACCURATE_ROUNDING +#undef DESCALE +#define DESCALE(x,n) RIGHT_SHIFT(x, n) +#endif + + +/* Multiply a DCTELEM variable by an INT32 constant, and immediately + * descale to yield a DCTELEM result. + */ + +#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce a DCTELEM result. For 8-bit data a 16x16->16 + * multiplication will do. For 12-bit data, the multiplier table is + * declared INT32, so a 32-bit multiply will be used. + */ + +#if BITS_IN_JSAMPLE == 8 +#define DEQUANTIZE(coef,quantval) (((IFAST_MULT_TYPE) (coef)) * (quantval)) +#else +#define DEQUANTIZE(coef,quantval) \ + DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS) +#endif + + +/* Like DESCALE, but applies to a DCTELEM and produces an int. + * We assume that int right shift is unsigned if INT32 right shift is. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS DCTELEM ishift_temp; +#if BITS_IN_JSAMPLE == 8 +#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ +#else +#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ +#endif +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + +#ifdef USE_ACCURATE_ROUNDING +#define IDESCALE(x,n) ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n)) +#else +#define IDESCALE(x,n) ((int) IRIGHT_SHIFT(x, n)) +#endif + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL(void) +jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + DCTELEM tmp10, tmp11, tmp12, tmp13; + DCTELEM z5, z10, z11, z12, z13; + JCOEFPTR inptr; + IFAST_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS /* for DESCALE */ + ISHIFT_TEMPS /* for IDESCALE */ + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (IFAST_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = tmp0 + tmp2; /* phase 3 */ + tmp11 = tmp0 - tmp2; + + tmp13 = tmp1 + tmp3; /* phases 5-3 */ + tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; /* phase 2 */ + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z13 = tmp6 + tmp5; /* phase 6 */ + z10 = tmp6 - tmp5; + z11 = tmp4 + tmp7; + z12 = tmp4 - tmp7; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ + + z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ + tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ + tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); + wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); + wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6); + wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); + wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); + wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); + wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4); + wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part */ + + tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]); + tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]); + + tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]); + tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562) + - tmp13; + + tmp0 = tmp10 + tmp13; + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3]; + z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3]; + z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7]; + z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7]; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ + + z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ + tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ + tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + /* Final output stage: scale down by a factor of 8 and range-limit */ + + outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_IFAST_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jidctint.c b/third_party/libjpeg/fpdfapi_jidctint.c new file mode 100644 index 0000000000..78a8d66552 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jidctint.c @@ -0,0 +1,392 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jidctint.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) + * larger than the true IDCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D IDCT, + * because the y0 and y4 inputs need not be divided by sqrt(N). + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (To scale up 12-bit sample data further, an + * intermediate INT32 array would be needed.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce an int result. In this module, both inputs and result + * are 16 bits or less, so either int or short multiply will work. + */ + +#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL(void) +jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065); + tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865); + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + tmp10 = tmp0 + tmp3; + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z1 = tmp0 + tmp3; + z2 = tmp1 + tmp2; + z3 = tmp0 + tmp2; + z4 = tmp1 + tmp3; + z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ + + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + + z3 += z5; + z4 += z5; + + tmp0 += z1 + z3; + tmp1 += z2 + z4; + tmp2 += z2 + z3; + tmp3 += z1 + z4; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) DESCALE(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) DESCALE(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) DESCALE(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) DESCALE(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) DESCALE(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) DESCALE(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065); + tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865); + + tmp0 = ((INT32) wsptr[0] + (INT32) wsptr[4]) << CONST_BITS; + tmp1 = ((INT32) wsptr[0] - (INT32) wsptr[4]) << CONST_BITS; + + tmp10 = tmp0 + tmp3; + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z1 = tmp0 + tmp3; + z2 = tmp1 + tmp2; + z3 = tmp0 + tmp2; + z4 = tmp1 + tmp3; + z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */ + + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + + z3 += z5; + z4 += z5; + + tmp0 += z1 + z3; + tmp1 += z2 + z4; + tmp2 += z2 + z3; + tmp3 += z1 + z4; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) DESCALE(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) DESCALE(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) DESCALE(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) DESCALE(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) DESCALE(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) DESCALE(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) DESCALE(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_ISLOW_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jidctred.c b/third_party/libjpeg/fpdfapi_jidctred.c new file mode 100644 index 0000000000..8b4b807192 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jidctred.c @@ -0,0 +1,401 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jidctred.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains inverse-DCT routines that produce reduced-size output: + * either 4x4, 2x2, or 1x1 pixels from an 8x8 DCT block. + * + * The implementation is based on the Loeffler, Ligtenberg and Moschytz (LL&M) + * algorithm used in jidctint.c. We simply replace each 8-to-8 1-D IDCT step + * with an 8-to-4 step that produces the four averages of two adjacent outputs + * (or an 8-to-2 step producing two averages of four outputs, for 2x2 output). + * These steps were derived by computing the corresponding values at the end + * of the normal LL&M code, then simplifying as much as possible. + * + * 1x1 is trivial: just take the DC coefficient divided by 8. + * + * See jidctint.c for additional comments. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef IDCT_SCALING_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling is the same as in jidctint.c. */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_211164243 ((INT32) 1730) /* FIX(0.211164243) */ +#define FIX_0_509795579 ((INT32) 4176) /* FIX(0.509795579) */ +#define FIX_0_601344887 ((INT32) 4926) /* FIX(0.601344887) */ +#define FIX_0_720959822 ((INT32) 5906) /* FIX(0.720959822) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_850430095 ((INT32) 6967) /* FIX(0.850430095) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_061594337 ((INT32) 8697) /* FIX(1.061594337) */ +#define FIX_1_272758580 ((INT32) 10426) /* FIX(1.272758580) */ +#define FIX_1_451774981 ((INT32) 11893) /* FIX(1.451774981) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_2_172734803 ((INT32) 17799) /* FIX(2.172734803) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_624509785 ((INT32) 29692) /* FIX(3.624509785) */ +#else +#define FIX_0_211164243 FIX(0.211164243) +#define FIX_0_509795579 FIX(0.509795579) +#define FIX_0_601344887 FIX(0.601344887) +#define FIX_0_720959822 FIX(0.720959822) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_850430095 FIX(0.850430095) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_061594337 FIX(1.061594337) +#define FIX_1_272758580 FIX(1.272758580) +#define FIX_1_451774981 FIX(1.451774981) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_2_172734803 FIX(2.172734803) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_624509785 FIX(3.624509785) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce an int result. In this module, both inputs and result + * are 16 bits or less, so either int or short multiply will work. + */ + +#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 4x4 output block. + */ + +GLOBAL(void) +jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { + /* Don't bother to process column 4, because second pass won't use it */ + if (ctr == DCTSIZE-4) + continue; + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*5] == 0 && + inptr[DCTSIZE*6] == 0 && inptr[DCTSIZE*7] == 0) { + /* AC terms all zero; we need not examine term 4 for 4x4 output */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= (CONST_BITS+1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp2 = MULTIPLY(z2, FIX_1_847759065) + MULTIPLY(z3, - FIX_0_765366865); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + z2 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ + + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ + + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ + + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ + + tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ + + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ + + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ + + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ + + /* Final output stage */ + + wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp2, CONST_BITS-PASS1_BITS+1); + wsptr[DCTSIZE*3] = (int) DESCALE(tmp10 - tmp2, CONST_BITS-PASS1_BITS+1); + wsptr[DCTSIZE*1] = (int) DESCALE(tmp12 + tmp0, CONST_BITS-PASS1_BITS+1); + wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 - tmp0, CONST_BITS-PASS1_BITS+1); + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + /* It's not clear whether a zero row test is worthwhile here ... */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part */ + + tmp0 = ((INT32) wsptr[0]) << (CONST_BITS+1); + + tmp2 = MULTIPLY((INT32) wsptr[2], FIX_1_847759065) + + MULTIPLY((INT32) wsptr[6], - FIX_0_765366865); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + /* Odd part */ + + z1 = (INT32) wsptr[7]; + z2 = (INT32) wsptr[5]; + z3 = (INT32) wsptr[3]; + z4 = (INT32) wsptr[1]; + + tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */ + + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */ + + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */ + + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */ + + tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */ + + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */ + + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */ + + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp2, + CONST_BITS+PASS1_BITS+3+1) + & RANGE_MASK]; + outptr[3] = range_limit[(int) DESCALE(tmp10 - tmp2, + CONST_BITS+PASS1_BITS+3+1) + & RANGE_MASK]; + outptr[1] = range_limit[(int) DESCALE(tmp12 + tmp0, + CONST_BITS+PASS1_BITS+3+1) + & RANGE_MASK]; + outptr[2] = range_limit[(int) DESCALE(tmp12 - tmp0, + CONST_BITS+PASS1_BITS+3+1) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 2x2 output block. + */ + +GLOBAL(void) +jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp10, z1; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE*2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) { + /* Don't bother to process columns 2,4,6 */ + if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6) + continue; + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*3] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*7] == 0) { + /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + + continue; + } + + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 = z1 << (CONST_BITS+2); + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp0 = MULTIPLY(z1, - FIX_0_720959822); /* sqrt(2) * (c7-c5+c3-c1) */ + z1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp0 += MULTIPLY(z1, FIX_0_850430095); /* sqrt(2) * (-c1+c3+c5+c7) */ + z1 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp0 += MULTIPLY(z1, - FIX_1_272758580); /* sqrt(2) * (-c1+c3-c5-c7) */ + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 += MULTIPLY(z1, FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ + + /* Final output stage */ + + wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp0, CONST_BITS-PASS1_BITS+2); + wsptr[DCTSIZE*1] = (int) DESCALE(tmp10 - tmp0, CONST_BITS-PASS1_BITS+2); + } + + /* Pass 2: process 2 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++) { + outptr = output_buf[ctr] + output_col; + /* It's not clear whether a zero row test is worthwhile here ... */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[3] == 0 && wsptr[5] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part */ + + tmp10 = ((INT32) wsptr[0]) << (CONST_BITS+2); + + /* Odd part */ + + tmp0 = MULTIPLY((INT32) wsptr[7], - FIX_0_720959822) /* sqrt(2) * (c7-c5+c3-c1) */ + + MULTIPLY((INT32) wsptr[5], FIX_0_850430095) /* sqrt(2) * (-c1+c3+c5+c7) */ + + MULTIPLY((INT32) wsptr[3], - FIX_1_272758580) /* sqrt(2) * (-c1+c3-c5-c7) */ + + MULTIPLY((INT32) wsptr[1], FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3+2) + & RANGE_MASK]; + outptr[1] = range_limit[(int) DESCALE(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3+2) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 1x1 output block. + */ + +GLOBAL(void) +jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + int dcval; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* We hardly need an inverse DCT routine for this: just take the + * average pixel value, which is one-eighth of the DC coefficient. + */ + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + dcval = DEQUANTIZE(coef_block[0], quantptr[0]); + dcval = (int) DESCALE((INT32) dcval, 3); + + output_buf[0][output_col] = range_limit[dcval & RANGE_MASK]; +} + +#endif /* IDCT_SCALING_SUPPORTED */ + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jmemmgr.c b/third_party/libjpeg/fpdfapi_jmemmgr.c new file mode 100644 index 0000000000..630102fc2e --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jmemmgr.c @@ -0,0 +1,1123 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jmemmgr.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the JPEG system-independent memory management + * routines. This code is usable across a wide variety of machines; most + * of the system dependencies have been isolated in a separate file. + * The major functions provided here are: + * * pool-based allocation and freeing of memory; + * * policy decisions about how to divide available memory among the + * virtual arrays; + * * control logic for swapping virtual arrays between main memory and + * backing storage. + * The separate system-dependent file provides the actual backing-storage + * access code, and it contains the policy decision about how much total + * main memory to use. + * This file is system-dependent in the sense that some of its functions + * are unnecessary in some systems. For example, if there is enough virtual + * memory so that backing storage will never be used, much of the virtual + * array control logic could be removed. (Of course, if you have that much + * memory then you shouldn't care about a little bit of unused code...) + */ + +#define JPEG_INTERNALS +#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#define NO_GETENV /* XYQ: 2007-5-22 Don't use it */ + +#ifndef NO_GETENV +#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare getenv() */ +extern char * getenv JPP((const char * name)); +#endif +#endif + + +/* + * Some important notes: + * The allocation routines provided here must never return NULL. + * They should exit to error_exit if unsuccessful. + * + * It's not a good idea to try to merge the sarray and barray routines, + * even though they are textually almost the same, because samples are + * usually stored as bytes while coefficients are shorts or ints. Thus, + * in machines where byte pointers have a different representation from + * word pointers, the resulting machine code could not be the same. + */ + + +/* + * Many machines require storage alignment: longs must start on 4-byte + * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() + * always returns pointers that are multiples of the worst-case alignment + * requirement, and we had better do so too. + * There isn't any really portable way to determine the worst-case alignment + * requirement. This module assumes that the alignment requirement is + * multiples of sizeof(ALIGN_TYPE). + * By default, we define ALIGN_TYPE as double. This is necessary on some + * workstations (where doubles really do need 8-byte alignment) and will work + * fine on nearly everything. If your machine has lesser alignment needs, + * you can save a few bytes by making ALIGN_TYPE smaller. + * The only place I know of where this will NOT work is certain Macintosh + * 680x0 compilers that define double as a 10-byte IEEE extended float. + * Doing 10-byte alignment is counterproductive because longwords won't be + * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have + * such a compiler. + */ + +#ifndef ALIGN_TYPE /* so can override from jconfig.h */ +#define ALIGN_TYPE double +#endif + + +/* + * We allocate objects from "pools", where each pool is gotten with a single + * request to jpeg_get_small() or jpeg_get_large(). There is no per-object + * overhead within a pool, except for alignment padding. Each pool has a + * header with a link to the next pool of the same class. + * Small and large pool headers are identical except that the latter's + * link pointer must be FAR on 80x86 machines. + * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE + * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple + * of the alignment requirement of ALIGN_TYPE. + */ + +typedef union small_pool_struct * small_pool_ptr; + +typedef union small_pool_struct { + struct { + small_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} small_pool_hdr; + +typedef union large_pool_struct FAR * large_pool_ptr; + +typedef union large_pool_struct { + struct { + large_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} large_pool_hdr; + + +/* + * Here is the full definition of a memory manager object. + */ + +typedef struct { + struct jpeg_memory_mgr pub; /* public fields */ + + /* Each pool identifier (lifetime class) names a linked list of pools. */ + small_pool_ptr small_list[JPOOL_NUMPOOLS]; + large_pool_ptr large_list[JPOOL_NUMPOOLS]; + + /* Since we only have one lifetime class of virtual arrays, only one + * linked list is necessary (for each datatype). Note that the virtual + * array control blocks being linked together are actually stored somewhere + * in the small-pool list. + */ + jvirt_sarray_ptr virt_sarray_list; + jvirt_barray_ptr virt_barray_list; + + /* This counts total space obtained from jpeg_get_small/large */ + long total_space_allocated; + + /* alloc_sarray and alloc_barray set this value for use by virtual + * array routines. + */ + JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ +} my_memory_mgr; + +typedef my_memory_mgr * my_mem_ptr; + + +/* + * The control blocks for virtual arrays. + * Note that these blocks are allocated in the "small" pool area. + * System-dependent info for the associated backing store (if any) is hidden + * inside the backing_store_info struct. + */ + +struct jvirt_sarray_control { + JSAMPARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_sarray_ptr next; /* link to next virtual sarray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + +struct jvirt_barray_control { + JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_barray_ptr next; /* link to next virtual barray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + + +#ifdef MEM_STATS /* optional extra stuff for statistics */ + +LOCAL(void) +print_mem_stats (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + + /* Since this is only a debugging stub, we can cheat a little by using + * fprintf directly rather than going through the trace message code. + * This is helpful because message parm array can't handle longs. + */ + FXSYS_fprintf(stderr, "Freeing pool %d, total space = %ld\n", + pool_id, mem->total_space_allocated); + + for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; + lhdr_ptr = lhdr_ptr->hdr.next) { + FXSYS_fprintf(stderr, " Large chunk used %ld\n", + (long) lhdr_ptr->hdr.bytes_used); + } + + for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; + shdr_ptr = shdr_ptr->hdr.next) { + FXSYS_fprintf(stderr, " Small chunk used %ld free %ld\n", + (long) shdr_ptr->hdr.bytes_used, + (long) shdr_ptr->hdr.bytes_left); + } +} + +#endif /* MEM_STATS */ + + +LOCAL(void) +out_of_memory (j_common_ptr cinfo, int which) +/* Report an out-of-memory error and stop execution */ +/* If we compiled MEM_STATS support, report alloc requests before dying */ +{ +#ifdef MEM_STATS + cinfo->err->trace_level = 2; /* force self_destruct to report stats */ +#endif + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); +} + + +/* + * Allocation of "small" objects. + * + * For these, we use pooled storage. When a new pool must be created, + * we try to get enough space for the current request plus a "slop" factor, + * where the slop will be the amount of leftover space in the new pool. + * The speed vs. space tradeoff is largely determined by the slop values. + * A different slop value is provided for each pool class (lifetime), + * and we also distinguish the first pool of a class from later ones. + * NOTE: the values given work fairly well on both 16- and 32-bit-int + * machines, but may be too small if longs are 64 bits or more. + */ + +static const size_t first_pool_slop[JPOOL_NUMPOOLS] = +{ + 1600, /* first PERMANENT pool */ + 16000 /* first IMAGE pool */ +}; + +static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = +{ + 0, /* additional PERMANENT pools */ + 5000 /* additional IMAGE pools */ +}; + +#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ + + +METHODDEF(void *) +alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "small" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr hdr_ptr, prev_hdr_ptr; + char * data_ptr; + size_t odd_bytes, min_request, slop; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) + out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* See if space is available in any existing pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + prev_hdr_ptr = NULL; + hdr_ptr = mem->small_list[pool_id]; + while (hdr_ptr != NULL) { + if (hdr_ptr->hdr.bytes_left >= sizeofobject) + break; /* found pool with enough space */ + prev_hdr_ptr = hdr_ptr; + hdr_ptr = hdr_ptr->hdr.next; + } + + /* Time to make a new pool? */ + if (hdr_ptr == NULL) { + /* min_request is what we need now, slop is what will be leftover */ + min_request = sizeofobject + SIZEOF(small_pool_hdr); + if (prev_hdr_ptr == NULL) /* first pool in class? */ + slop = first_pool_slop[pool_id]; + else + slop = extra_pool_slop[pool_id]; + /* Don't ask for more than MAX_ALLOC_CHUNK */ + if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) + slop = (size_t) (MAX_ALLOC_CHUNK-min_request); + /* Try to get space, if fail reduce slop and try again */ + for (;;) { + hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); + if (hdr_ptr != NULL) + break; + slop /= 2; + if (slop < MIN_SLOP) /* give up when it gets real small */ + out_of_memory(cinfo, 2); /* jpeg_get_small failed */ + } + mem->total_space_allocated += min_request + slop; + /* Success, initialize the new pool header and add to end of list */ + hdr_ptr->hdr.next = NULL; + hdr_ptr->hdr.bytes_used = 0; + hdr_ptr->hdr.bytes_left = sizeofobject + slop; + if (prev_hdr_ptr == NULL) /* first pool in class? */ + mem->small_list[pool_id] = hdr_ptr; + else + prev_hdr_ptr->hdr.next = hdr_ptr; + } + + /* OK, allocate the object from the current pool */ + data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ + data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ + hdr_ptr->hdr.bytes_used += sizeofobject; + hdr_ptr->hdr.bytes_left -= sizeofobject; + + return (void *) data_ptr; +} + + +/* + * Allocation of "large" objects. + * + * The external semantics of these are the same as "small" objects, + * except that FAR pointers are used on 80x86. However the pool + * management heuristics are quite different. We assume that each + * request is large enough that it may as well be passed directly to + * jpeg_get_large; the pool management just links everything together + * so that we can free it all on demand. + * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY + * structures. The routines that create these structures (see below) + * deliberately bunch rows together to ensure a large request size. + */ + +METHODDEF(void FAR *) +alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "large" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + large_pool_ptr hdr_ptr; + size_t odd_bytes; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) + out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* Always make a new pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + + SIZEOF(large_pool_hdr)); + if (hdr_ptr == NULL) + out_of_memory(cinfo, 4); /* jpeg_get_large failed */ + mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr); + + /* Success, initialize the new pool header and add to list */ + hdr_ptr->hdr.next = mem->large_list[pool_id]; + /* We maintain space counts in each pool header for statistical purposes, + * even though they are not needed for allocation. + */ + hdr_ptr->hdr.bytes_used = sizeofobject; + hdr_ptr->hdr.bytes_left = 0; + mem->large_list[pool_id] = hdr_ptr; + + return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ +} + + +/* + * Creation of 2-D sample arrays. + * The pointers are in near heap, the samples themselves in FAR heap. + * + * To minimize allocation overhead and to allow I/O of large contiguous + * blocks, we allocate the sample rows in groups of as many rows as possible + * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. + * NB: the virtual array control routines, later in this file, know about + * this chunking of rows. The rowsperchunk value is left in the mem manager + * object so that it can be saved away if this sarray is the workspace for + * a virtual array. + */ + +METHODDEF(JSAMPARRAY) +alloc_sarray (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, JDIMENSION numrows) +/* Allocate a 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JSAMPARRAY result; + JSAMPROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) samplesperrow * SIZEOF(JSAMPLE)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JSAMPARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JSAMPROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JSAMPROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow + * SIZEOF(JSAMPLE))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += samplesperrow; + } + } + + return result; +} + + +/* + * Creation of 2-D coefficient-block arrays. + * This is essentially the same as the code for sample arrays, above. + */ + +METHODDEF(JBLOCKARRAY) +alloc_barray (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, JDIMENSION numrows) +/* Allocate a 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JBLOCKARRAY result; + JBLOCKROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) blocksperrow * SIZEOF(JBLOCK)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JBLOCKROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow + * SIZEOF(JBLOCK))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += blocksperrow; + } + } + + return result; +} + + +/* + * About virtual array management: + * + * The above "normal" array routines are only used to allocate strip buffers + * (as wide as the image, but just a few rows high). Full-image-sized buffers + * are handled as "virtual" arrays. The array is still accessed a strip at a + * time, but the memory manager must save the whole array for repeated + * accesses. The intended implementation is that there is a strip buffer in + * memory (as high as is possible given the desired memory limit), plus a + * backing file that holds the rest of the array. + * + * The request_virt_array routines are told the total size of the image and + * the maximum number of rows that will be accessed at once. The in-memory + * buffer must be at least as large as the maxaccess value. + * + * The request routines create control blocks but not the in-memory buffers. + * That is postponed until realize_virt_arrays is called. At that time the + * total amount of space needed is known (approximately, anyway), so free + * memory can be divided up fairly. + * + * The access_virt_array routines are responsible for making a specific strip + * area accessible (after reading or writing the backing file, if necessary). + * Note that the access routines are told whether the caller intends to modify + * the accessed strip; during a read-only pass this saves having to rewrite + * data to disk. The access routines are also responsible for pre-zeroing + * any newly accessed rows, if pre-zeroing was requested. + * + * In current usage, the access requests are usually for nonoverlapping + * strips; that is, successive access start_row numbers differ by exactly + * num_rows = maxaccess. This means we can get good performance with simple + * buffer dump/reload logic, by making the in-memory buffer be a multiple + * of the access height; then there will never be accesses across bufferload + * boundaries. The code will still work with overlapping access requests, + * but it doesn't handle bufferload overlaps very efficiently. + */ + + +METHODDEF(jvirt_sarray_ptr) +request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION samplesperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_sarray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_sarray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->samplesperrow = samplesperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ + mem->virt_sarray_list = result; + + return result; +} + + +METHODDEF(jvirt_barray_ptr) +request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION blocksperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_barray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_barray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->blocksperrow = blocksperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_barray_list; /* add to list of virtual arrays */ + mem->virt_barray_list = result; + + return result; +} + + +METHODDEF(void) +realize_virt_arrays (j_common_ptr cinfo) +/* Allocate the in-memory buffers for any unrealized virtual arrays */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + long space_per_minheight, maximum_space, avail_mem; + long minheights, max_minheights; + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + /* Compute the minimum space needed (maxaccess rows in each buffer) + * and the maximum space needed (full image height in each buffer). + * These may be of use to the system-dependent jpeg_mem_available routine. + */ + space_per_minheight = 0; + maximum_space = 0; + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) sptr->maxaccess * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + maximum_space += (long) sptr->rows_in_array * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + } + } + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) bptr->maxaccess * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + maximum_space += (long) bptr->rows_in_array * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + } + } + + if (space_per_minheight <= 0) + return; /* no unrealized arrays, no work */ + + /* Determine amount of memory to actually use; this is system-dependent. */ + avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, + mem->total_space_allocated); + + /* If the maximum space needed is available, make all the buffers full + * height; otherwise parcel it out with the same number of minheights + * in each buffer. + */ + if (avail_mem >= maximum_space) + max_minheights = 1000000000L; + else { + max_minheights = avail_mem / space_per_minheight; + /* If there doesn't seem to be enough space, try to get the minimum + * anyway. This allows a "stub" implementation of jpeg_mem_available(). + */ + if (max_minheights <= 0) + max_minheights = 1; + } + + /* Allocate the in-memory buffers and initialize backing store as needed. */ + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + sptr->rows_in_mem = sptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); + jpeg_open_backing_store(cinfo, & sptr->b_s_info, + (long) sptr->rows_in_array * + (long) sptr->samplesperrow * + (long) SIZEOF(JSAMPLE)); + sptr->b_s_open = TRUE; + } + sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, + sptr->samplesperrow, sptr->rows_in_mem); + sptr->rowsperchunk = mem->last_rowsperchunk; + sptr->cur_start_row = 0; + sptr->first_undef_row = 0; + sptr->dirty = FALSE; + } + } + + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + bptr->rows_in_mem = bptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); + jpeg_open_backing_store(cinfo, & bptr->b_s_info, + (long) bptr->rows_in_array * + (long) bptr->blocksperrow * + (long) SIZEOF(JBLOCK)); + bptr->b_s_open = TRUE; + } + bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, + bptr->blocksperrow, bptr->rows_in_mem); + bptr->rowsperchunk = mem->last_rowsperchunk; + bptr->cur_start_row = 0; + bptr->first_undef_row = 0; + bptr->dirty = FALSE; + } + } +} + + +LOCAL(void) +do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual sample array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +LOCAL(void) +do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual coefficient-block array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +METHODDEF(JSAMPARRAY) +access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual sample array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_sarray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_sarray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +METHODDEF(JBLOCKARRAY) +access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual block array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_barray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_barray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +/* + * Release all objects belonging to a specified pool. + */ + +METHODDEF(void) +free_pool (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + size_t space_freed; + + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + +#ifdef MEM_STATS + if (cinfo->err->trace_level > 1) + print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ +#endif + + /* If freeing IMAGE pool, close any virtual arrays first */ + if (pool_id == JPOOL_IMAGE) { + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->b_s_open) { /* there may be no backing store */ + sptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); + } + } + mem->virt_sarray_list = NULL; + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->b_s_open) { /* there may be no backing store */ + bptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); + } + } + mem->virt_barray_list = NULL; + } + + /* Release large objects */ + lhdr_ptr = mem->large_list[pool_id]; + mem->large_list[pool_id] = NULL; + + while (lhdr_ptr != NULL) { + large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; + space_freed = lhdr_ptr->hdr.bytes_used + + lhdr_ptr->hdr.bytes_left + + SIZEOF(large_pool_hdr); + jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + lhdr_ptr = next_lhdr_ptr; + } + + /* Release small objects */ + shdr_ptr = mem->small_list[pool_id]; + mem->small_list[pool_id] = NULL; + + while (shdr_ptr != NULL) { + small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; + space_freed = shdr_ptr->hdr.bytes_used + + shdr_ptr->hdr.bytes_left + + SIZEOF(small_pool_hdr); + jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + shdr_ptr = next_shdr_ptr; + } +} + + +/* + * Close up shop entirely. + * Note that this cannot be called unless cinfo->mem is non-NULL. + */ + +METHODDEF(void) +self_destruct (j_common_ptr cinfo) +{ + int pool; + + /* Close all backing store, release all memory. + * Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + free_pool(cinfo, pool); + } + + /* Release the memory manager control block too. */ + jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); + cinfo->mem = NULL; /* ensures I will be called only once */ + + jpeg_mem_term(cinfo); /* system-dependent cleanup */ +} + + +/* + * Memory manager initialization. + * When this is called, only the error manager pointer is valid in cinfo! + */ + +GLOBAL(void) +jinit_memory_mgr (j_common_ptr cinfo) +{ + my_mem_ptr mem; + long max_to_use; + int pool; + size_t test_mac; + + cinfo->mem = NULL; /* for safety if init fails */ + + /* Check for configuration errors. + * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably + * doesn't reflect any real hardware alignment requirement. + * The test is a little tricky: for X>0, X and X-1 have no one-bits + * in common if and only if X is a power of 2, ie has only one one-bit. + * Some compilers may give an "unreachable code" warning here; ignore it. + */ + if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) + ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); + /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be + * a multiple of SIZEOF(ALIGN_TYPE). + * Again, an "unreachable code" warning may be ignored here. + * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. + */ + test_mac = (size_t) MAX_ALLOC_CHUNK; + if ((long) test_mac != MAX_ALLOC_CHUNK || + (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + + max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ + + /* Attempt to allocate memory manager's control block */ + mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); + + if (mem == NULL) { + jpeg_mem_term(cinfo); /* system-dependent cleanup */ + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); + } + + /* OK, fill in the method pointers */ + mem->pub.alloc_small = alloc_small; + mem->pub.alloc_large = alloc_large; + mem->pub.alloc_sarray = alloc_sarray; + mem->pub.alloc_barray = alloc_barray; + mem->pub.request_virt_sarray = request_virt_sarray; + mem->pub.request_virt_barray = request_virt_barray; + mem->pub.realize_virt_arrays = realize_virt_arrays; + mem->pub.access_virt_sarray = access_virt_sarray; + mem->pub.access_virt_barray = access_virt_barray; + mem->pub.free_pool = free_pool; + mem->pub.self_destruct = self_destruct; + + /* Make MAX_ALLOC_CHUNK accessible to other modules */ + mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK; + + /* Initialize working state */ + mem->pub.max_memory_to_use = max_to_use; + + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + mem->small_list[pool] = NULL; + mem->large_list[pool] = NULL; + } + mem->virt_sarray_list = NULL; + mem->virt_barray_list = NULL; + + mem->total_space_allocated = SIZEOF(my_memory_mgr); + + /* Declare ourselves open for business */ + cinfo->mem = & mem->pub; + + /* Check for an environment variable JPEGMEM; if found, override the + * default max_memory setting from jpeg_mem_init. Note that the + * surrounding application may again override this value. + * If your system doesn't support getenv(), define NO_GETENV to disable + * this feature. + */ +#ifndef NO_GETENV + { char * memenv; + + if ((memenv = getenv("JPEGMEM")) != NULL) { + char ch = 'x'; + + if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { + if (ch == 'm' || ch == 'M') + max_to_use *= 1000L; + mem->pub.max_memory_to_use = max_to_use * 1000L; + } + } + } +#endif + +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jmemnobs.c b/third_party/libjpeg/fpdfapi_jmemnobs.c new file mode 100644 index 0000000000..f1f789a1a6 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jmemnobs.c @@ -0,0 +1,126 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jmemnobs.c + * + * Copyright (C) 1992-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a really simple implementation of the system- + * dependent portion of the JPEG memory manager. This implementation + * assumes that no backing-store files are needed: all required space + * can be obtained from malloc(). + * This is very portable in the sense that it'll compile on almost anything, + * but you'd better have lots of main memory (or virtual memory) if you want + * to process big images. + * Note that the max_memory_to_use option is ignored by this implementation. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + +#if defined(_FX_MANAGED_CODE_) && defined(__cplusplus) +extern "C" { +#endif + +void* FXMEM_DefaultAlloc(int byte_size, int); +void FXMEM_DefaultFree(void* pointer, int); + +#if defined(_FX_MANAGED_CODE_) && defined(__cplusplus) +} +#endif + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ +// return (void *) malloc(sizeofobject); + return FXMEM_DefaultAlloc(sizeofobject, 0); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ +// free(object); + FXMEM_DefaultFree(object, 0); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ +// return (void FAR *) malloc(sizeofobject); + return FXMEM_DefaultAlloc(sizeofobject, 0); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ +// free(object); + FXMEM_DefaultFree(object, 0); +} + + +/* + * This routine computes the total memory space available for allocation. + * Here we always say, "we got all you want bud!" + */ + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return max_bytes_needed; +} + + +/* + * Backing store (temporary file) management. + * Since jpeg_mem_available always promised the moon, + * this should never be called and we can just error out. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + ERREXIT(cinfo, JERR_NO_BACKING_STORE); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. Here, there isn't any. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + return 0; /* just set max_memory_to_use to 0 */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/fpdfapi_jutils.c b/third_party/libjpeg/fpdfapi_jutils.c new file mode 100644 index 0000000000..c6f7248af8 --- /dev/null +++ b/third_party/libjpeg/fpdfapi_jutils.c @@ -0,0 +1,182 @@ +#if !defined(_FX_JPEG_TURBO_) +/* + * jutils.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains tables and miscellaneous utility routines needed + * for both compression and decompression. + * Note we prefix all global names with "j" to minimize conflicts with + * a surrounding application. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element + * of a DCT block read in natural order (left to right, top to bottom). + */ + +#if 0 /* This table is not actually needed in v6a */ + +const int jpeg_zigzag_order[DCTSIZE2] = { + 0, 1, 5, 6, 14, 15, 27, 28, + 2, 4, 7, 13, 16, 26, 29, 42, + 3, 8, 12, 17, 25, 30, 41, 43, + 9, 11, 18, 24, 31, 40, 44, 53, + 10, 19, 23, 32, 39, 45, 52, 54, + 20, 22, 33, 38, 46, 51, 55, 60, + 21, 34, 37, 47, 50, 56, 59, 61, + 35, 36, 48, 49, 57, 58, 62, 63 +}; + +#endif + +/* + * jpeg_natural_order[i] is the natural-order position of the i'th element + * of zigzag order. + * + * When reading corrupted data, the Huffman decoders could attempt + * to reference an entry beyond the end of this array (if the decoded + * zero run length reaches past the end of the block). To prevent + * wild stores without adding an inner-loop test, we put some extra + * "63"s after the real entries. This will cause the extra coefficient + * to be stored in location 63 of the block, not somewhere random. + * The worst case would be a run-length of 15, which means we need 16 + * fake entries. + */ + +const int jpeg_natural_order[DCTSIZE2+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 7, 14, 21, 28, + 35, 42, 49, 56, 57, 50, 43, 36, + 29, 22, 15, 23, 30, 37, 44, 51, + 58, 59, 52, 45, 38, 31, 39, 46, + 53, 60, 61, 54, 47, 55, 62, 63, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + + +/* + * Arithmetic utilities + */ + +GLOBAL(long) +jdiv_round_up (long a, long b) +/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ +/* Assumes a >= 0, b > 0 */ +{ + return (a + b - 1L) / b; +} + + +GLOBAL(long) +jround_up (long a, long b) +/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ +/* Assumes a >= 0, b > 0 */ +{ + a += b - 1L; + return a - (a % b); +} + + +/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays + * and coefficient-block arrays. This won't work on 80x86 because the arrays + * are FAR and we're assuming a small-pointer memory model. However, some + * DOS compilers provide far-pointer versions of memcpy() and memset() even + * in the small-model libraries. These will be used if USE_FMEM is defined. + * Otherwise, the routines below do it the hard way. (The performance cost + * is not all that great, because these routines aren't very heavily used.) + */ + +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macros */ +#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) +#define FMEMZERO(target,size) MEMZERO(target,size) +#else /* 80x86 case, define if we can */ +#ifdef USE_FMEM +#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) +#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) +#endif +#endif + + +GLOBAL(void) +jcopy_sample_rows (JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols) +/* Copy some rows of samples from one place to another. + * num_rows rows are copied from input_array[source_row++] + * to output_array[dest_row++]; these areas may overlap for duplication. + * The source and destination arrays must be at least as wide as num_cols. + */ +{ + register JSAMPROW inptr, outptr; +#ifdef FMEMCOPY + register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); +#else + register JDIMENSION count; +#endif + register int row; + + input_array += source_row; + output_array += dest_row; + + for (row = num_rows; row > 0; row--) { + inptr = *input_array++; + outptr = *output_array++; +#ifdef FMEMCOPY + FMEMCOPY(outptr, inptr, count); +#else + for (count = num_cols; count > 0; count--) + *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ +#endif + } +} + + +GLOBAL(void) +jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks) +/* Copy a row of coefficient blocks from one place to another. */ +{ +#ifdef FMEMCOPY + FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); +#else + register JCOEFPTR inptr, outptr; + register long count; + + inptr = (JCOEFPTR) input_row; + outptr = (JCOEFPTR) output_row; + for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { + *outptr++ = *inptr++; + } +#endif +} + + +GLOBAL(void) +jzero_far (void FAR * target, size_t bytestozero) +/* Zero out a chunk of FAR memory. */ +/* This might be sample-array data, block-array data, or alloc_large data. */ +{ +#ifdef FMEMZERO + FMEMZERO(target, bytestozero); +#else + register char FAR * ptr = (char FAR *) target; + register size_t count; + + for (count = bytestozero; count > 0; count--) { + *ptr++ = 0; + } +#endif +} + +#endif //_FX_JPEG_TURBO_ diff --git a/third_party/libjpeg/jchuff.h b/third_party/libjpeg/jchuff.h new file mode 100644 index 0000000000..a9599fc1e6 --- /dev/null +++ b/third_party/libjpeg/jchuff.h @@ -0,0 +1,47 @@ +/* + * jchuff.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for Huffman entropy encoding routines + * that are shared between the sequential encoder (jchuff.c) and the + * progressive encoder (jcphuff.c). No other modules need to see these. + */ + +/* The legal range of a DCT coefficient is + * -1024 .. +1023 for 8-bit data; + * -16384 .. +16383 for 12-bit data. + * Hence the magnitude should always fit in 10 or 14 bits respectively. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MAX_COEF_BITS 10 +#else +#define MAX_COEF_BITS 14 +#endif + +/* Derived data constructed for each Huffman table */ + +typedef struct { + unsigned int ehufco[256]; /* code for each symbol */ + char ehufsi[256]; /* length of code for each symbol */ + /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ +} c_derived_tbl; + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_make_c_derived_tbl jMkCDerived +#define jpeg_gen_optimal_table jGenOptTbl +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Expand a Huffman table definition into the derived format */ +EXTERN(void) jpeg_make_c_derived_tbl + JPP((j_compress_ptr cinfo, boolean isDC, int tblno, + c_derived_tbl ** pdtbl)); + +/* Generate an optimal table definition given the specified counts */ +EXTERN(void) jpeg_gen_optimal_table + JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[])); diff --git a/third_party/libjpeg/jconfig.h b/third_party/libjpeg/jconfig.h new file mode 100644 index 0000000000..ea3c397799 --- /dev/null +++ b/third_party/libjpeg/jconfig.h @@ -0,0 +1,51 @@ +// Copyright 2014 PDFium Authors. All rights reserved. +// Use of this source code is governed by a BSD-style license that can be +// found in the LICENSE file. + +// Original code copyright 2014 Foxit Software Inc. http://www.foxitsoftware.com + +/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */ +/* see jconfig.doc for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not int, per Windows custom */ +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ + + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Microsoft has setmode() */ +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/third_party/libjpeg/jdct.h b/third_party/libjpeg/jdct.h new file mode 100644 index 0000000000..04192a266a --- /dev/null +++ b/third_party/libjpeg/jdct.h @@ -0,0 +1,176 @@ +/* + * jdct.h + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file contains common declarations for the forward and + * inverse DCT modules. These declarations are private to the DCT managers + * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. + * The individual DCT algorithms are kept in separate files to ease + * machine-dependent tuning (e.g., assembly coding). + */ + + +/* + * A forward DCT routine is given a pointer to a work area of type DCTELEM[]; + * the DCT is to be performed in-place in that buffer. Type DCTELEM is int + * for 8-bit samples, INT32 for 12-bit samples. (NOTE: Floating-point DCT + * implementations use an array of type FAST_FLOAT, instead.) + * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE). + * The DCT outputs are returned scaled up by a factor of 8; they therefore + * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This + * convention improves accuracy in integer implementations and saves some + * work in floating-point ones. + * Quantization of the output coefficients is done by jcdctmgr.c. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef int DCTELEM; /* 16 or 32 bits is fine */ +#else +typedef INT32 DCTELEM; /* must have 32 bits */ +#endif + +typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data)); +typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data)); + + +/* + * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer + * to an output sample array. The routine must dequantize the input data as + * well as perform the IDCT; for dequantization, it uses the multiplier table + * pointed to by compptr->dct_table. The output data is to be placed into the + * sample array starting at a specified column. (Any row offset needed will + * be applied to the array pointer before it is passed to the IDCT code.) + * Note that the number of samples emitted by the IDCT routine is + * DCT_scaled_size * DCT_scaled_size. + */ + +/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ + +/* + * Each IDCT routine has its own ideas about the best dct_table element type. + */ + +typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ +#if BITS_IN_JSAMPLE == 8 +typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ +#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ +#else +typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ +#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ +#endif +typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ + + +/* + * Each IDCT routine is responsible for range-limiting its results and + * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could + * be quite far out of range if the input data is corrupt, so a bulletproof + * range-limiting step is required. We use a mask-and-table-lookup method + * to do the combined operations quickly. See the comments with + * prepare_range_limit_table (in jdmaster.c) for more info. + */ + +#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) + +#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_fdct_islow jFDislow +#define jpeg_fdct_ifast jFDifast +#define jpeg_fdct_float jFDfloat +#define jpeg_idct_islow jRDislow +#define jpeg_idct_ifast jRDifast +#define jpeg_idct_float jRDfloat +#define jpeg_idct_4x4 jRD4x4 +#define jpeg_idct_2x2 jRD2x2 +#define jpeg_idct_1x1 jRD1x1 +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Extern declarations for the forward and inverse DCT routines. */ + +EXTERN(void) jpeg_fdct_islow JPP((DCTELEM * data)); +EXTERN(void) jpeg_fdct_ifast JPP((DCTELEM * data)); +EXTERN(void) jpeg_fdct_float JPP((FAST_FLOAT * data)); + +EXTERN(void) jpeg_idct_islow + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_ifast + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_float + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); + + +/* + * Macros for handling fixed-point arithmetic; these are used by many + * but not all of the DCT/IDCT modules. + * + * All values are expected to be of type INT32. + * Fractional constants are scaled left by CONST_BITS bits. + * CONST_BITS is defined within each module using these macros, + * and may differ from one module to the next. + */ + +#define ONE ((INT32) 1) +#define CONST_SCALE (ONE << CONST_BITS) + +/* Convert a positive real constant to an integer scaled by CONST_SCALE. + * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, + * thus causing a lot of useless floating-point operations at run time. + */ + +#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) + +/* Descale and correctly round an INT32 value that's scaled by N bits. + * We assume RIGHT_SHIFT rounds towards minus infinity, so adding + * the fudge factor is correct for either sign of X. + */ + +#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * This macro is used only when the two inputs will actually be no more than + * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a + * full 32x32 multiply. This provides a useful speedup on many machines. + * Unfortunately there is no way to specify a 16x16->32 multiply portably + * in C, but some C compilers will do the right thing if you provide the + * correct combination of casts. + */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) +#endif +#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) +#endif + +#ifndef MULTIPLY16C16 /* default definition */ +#define MULTIPLY16C16(var,const) ((var) * (const)) +#endif + +/* Same except both inputs are variables. */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) +#endif + +#ifndef MULTIPLY16V16 /* default definition */ +#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) +#endif diff --git a/third_party/libjpeg/jdhuff.h b/third_party/libjpeg/jdhuff.h new file mode 100644 index 0000000000..ae19b6cafd --- /dev/null +++ b/third_party/libjpeg/jdhuff.h @@ -0,0 +1,201 @@ +/* + * jdhuff.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for Huffman entropy decoding routines + * that are shared between the sequential decoder (jdhuff.c) and the + * progressive decoder (jdphuff.c). No other modules need to see these. + */ + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_make_d_derived_tbl jMkDDerived +#define jpeg_fill_bit_buffer jFilBitBuf +#define jpeg_huff_decode jHufDecode +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Derived data constructed for each Huffman table */ + +#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ + +typedef struct { + /* Basic tables: (element [0] of each array is unused) */ + INT32 maxcode[18]; /* largest code of length k (-1 if none) */ + /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ + INT32 valoffset[17]; /* huffval[] offset for codes of length k */ + /* valoffset[k] = huffval[] index of 1st symbol of code length k, less + * the smallest code of length k; so given a code of length k, the + * corresponding symbol is huffval[code + valoffset[k]] + */ + + /* Link to public Huffman table (needed only in jpeg_huff_decode) */ + JHUFF_TBL *pub; + + /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of + * the input data stream. If the next Huffman code is no more + * than HUFF_LOOKAHEAD bits long, we can obtain its length and + * the corresponding symbol directly from these tables. + */ + int look_nbits[1<<HUFF_LOOKAHEAD]; /* # bits, or 0 if too long */ + UINT8 look_sym[1<<HUFF_LOOKAHEAD]; /* symbol, or unused */ +} d_derived_tbl; + +/* Expand a Huffman table definition into the derived format */ +EXTERN(void) jpeg_make_d_derived_tbl + JPP((j_decompress_ptr cinfo, boolean isDC, int tblno, + d_derived_tbl ** pdtbl)); + + +/* + * Fetching the next N bits from the input stream is a time-critical operation + * for the Huffman decoders. We implement it with a combination of inline + * macros and out-of-line subroutines. Note that N (the number of bits + * demanded at one time) never exceeds 15 for JPEG use. + * + * We read source bytes into get_buffer and dole out bits as needed. + * If get_buffer already contains enough bits, they are fetched in-line + * by the macros CHECK_BIT_BUFFER and GET_BITS. When there aren't enough + * bits, jpeg_fill_bit_buffer is called; it will attempt to fill get_buffer + * as full as possible (not just to the number of bits needed; this + * prefetching reduces the overhead cost of calling jpeg_fill_bit_buffer). + * Note that jpeg_fill_bit_buffer may return FALSE to indicate suspension. + * On TRUE return, jpeg_fill_bit_buffer guarantees that get_buffer contains + * at least the requested number of bits --- dummy zeroes are inserted if + * necessary. + */ + +typedef INT32 bit_buf_type; /* type of bit-extraction buffer */ +#define BIT_BUF_SIZE 32 /* size of buffer in bits */ + +/* If long is > 32 bits on your machine, and shifting/masking longs is + * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE + * appropriately should be a win. Unfortunately we can't define the size + * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) + * because not all machines measure sizeof in 8-bit bytes. + */ + +typedef struct { /* Bitreading state saved across MCUs */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ +} bitread_perm_state; + +typedef struct { /* Bitreading working state within an MCU */ + /* Current data source location */ + /* We need a copy, rather than munging the original, in case of suspension */ + const JOCTET * next_input_byte; /* => next byte to read from source */ + size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ + /* Bit input buffer --- note these values are kept in register variables, + * not in this struct, inside the inner loops. + */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ + /* Pointer needed by jpeg_fill_bit_buffer. */ + j_decompress_ptr cinfo; /* back link to decompress master record */ +} bitread_working_state; + +/* Macros to declare and load/save bitread local variables. */ +#define BITREAD_STATE_VARS \ + register bit_buf_type get_buffer; \ + register int bits_left; \ + bitread_working_state br_state + +#define BITREAD_LOAD_STATE(cinfop,permstate) \ + br_state.cinfo = cinfop; \ + br_state.next_input_byte = cinfop->src->next_input_byte; \ + br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ + get_buffer = permstate.get_buffer; \ + bits_left = permstate.bits_left; + +#define BITREAD_SAVE_STATE(cinfop,permstate) \ + cinfop->src->next_input_byte = br_state.next_input_byte; \ + cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ + permstate.get_buffer = get_buffer; \ + permstate.bits_left = bits_left + +/* + * These macros provide the in-line portion of bit fetching. + * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer + * before using GET_BITS, PEEK_BITS, or DROP_BITS. + * The variables get_buffer and bits_left are assumed to be locals, + * but the state struct might not be (jpeg_huff_decode needs this). + * CHECK_BIT_BUFFER(state,n,action); + * Ensure there are N bits in get_buffer; if suspend, take action. + * val = GET_BITS(n); + * Fetch next N bits. + * val = PEEK_BITS(n); + * Fetch next N bits without removing them from the buffer. + * DROP_BITS(n); + * Discard next N bits. + * The value N should be a simple variable, not an expression, because it + * is evaluated multiple times. + */ + +#define CHECK_BIT_BUFFER(state,nbits,action) \ + { if (bits_left < (nbits)) { \ + if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ + { action; } \ + get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } + +#define GET_BITS(nbits) \ + (((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1)) + +#define PEEK_BITS(nbits) \ + (((int) (get_buffer >> (bits_left - (nbits)))) & ((1<<(nbits))-1)) + +#define DROP_BITS(nbits) \ + (bits_left -= (nbits)) + +/* Load up the bit buffer to a depth of at least nbits */ +EXTERN(boolean) jpeg_fill_bit_buffer + JPP((bitread_working_state * state, register bit_buf_type get_buffer, + register int bits_left, int nbits)); + + +/* + * Code for extracting next Huffman-coded symbol from input bit stream. + * Again, this is time-critical and we make the main paths be macros. + * + * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits + * without looping. Usually, more than 95% of the Huffman codes will be 8 + * or fewer bits long. The few overlength codes are handled with a loop, + * which need not be inline code. + * + * Notes about the HUFF_DECODE macro: + * 1. Near the end of the data segment, we may fail to get enough bits + * for a lookahead. In that case, we do it the hard way. + * 2. If the lookahead table contains no entry, the next code must be + * more than HUFF_LOOKAHEAD bits long. + * 3. jpeg_huff_decode returns -1 if forced to suspend. + */ + +#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ +{ register int nb, look; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + nb = 1; goto slowlabel; \ + } \ + } \ + look = PEEK_BITS(HUFF_LOOKAHEAD); \ + if ((nb = htbl->look_nbits[look]) != 0) { \ + DROP_BITS(nb); \ + result = htbl->look_sym[look]; \ + } else { \ + nb = HUFF_LOOKAHEAD+1; \ +slowlabel: \ + if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ + { failaction; } \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + } \ +} + +/* Out-of-line case for Huffman code fetching */ +EXTERN(int) jpeg_huff_decode + JPP((bitread_working_state * state, register bit_buf_type get_buffer, + register int bits_left, d_derived_tbl * htbl, int min_bits)); diff --git a/third_party/libjpeg/jerror.h b/third_party/libjpeg/jerror.h new file mode 100644 index 0000000000..06d344067a --- /dev/null +++ b/third_party/libjpeg/jerror.h @@ -0,0 +1,291 @@ +/* + * jerror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the JPEG library. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + * A set of error-reporting macros are defined too. Some applications using + * the JPEG library may wish to include this file to get the error codes + * and/or the macros. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef JERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* JERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ + +/* For maintenance convenience, list is alphabetical by message code name */ +JMESSAGE(JERR_ARITH_NOTIMPL, + "Sorry, there are legal restrictions on arithmetic coding") +JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") +JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") +JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") +JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") +JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported") +JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") +JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") +JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") +JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") +JMESSAGE(JERR_BAD_LIB_VERSION, + "Wrong JPEG library version: library is %d, caller expects %d") +JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") +JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") +JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") +JMESSAGE(JERR_BAD_PROGRESSION, + "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") +JMESSAGE(JERR_BAD_PROG_SCRIPT, + "Invalid progressive parameters at scan script entry %d") +JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") +JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") +JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") +JMESSAGE(JERR_BAD_STRUCT_SIZE, + "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u") +JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") +JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") +JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") +JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") +JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") +JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") +JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") +JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") +JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") +JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") +JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") +JMESSAGE(JERR_EMS_READ, "Read from EMS failed") +JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") +JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") +JMESSAGE(JERR_FILE_READ, "Input file read error") +JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") +JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") +JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") +JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") +JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") +JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") +JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") +JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, + "Cannot transcode due to multiple use of quantization table %d") +JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") +JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") +JMESSAGE(JERR_NOTIMPL, "Not implemented yet") +JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") +JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") +JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") +JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") +JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") +JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") +JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") +JMESSAGE(JERR_QUANT_COMPONENTS, + "Cannot quantize more than %d color components") +JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") +JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") +JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") +JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") +JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") +JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") +JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") +JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") +JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") +JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") +JMESSAGE(JERR_TFILE_WRITE, + "Write failed on temporary file --- out of disk space?") +JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") +JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") +JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") +JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") +JMESSAGE(JERR_XMS_READ, "Read from XMS failed") +JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") +JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) +JMESSAGE(JMSG_VERSION, JVERSION) +JMESSAGE(JTRC_16BIT_TABLES, + "Caution: quantization tables are too coarse for baseline JPEG") +JMESSAGE(JTRC_ADOBE, + "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") +JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") +JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") +JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") +JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") +JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") +JMESSAGE(JTRC_DRI, "Define Restart Interval %u") +JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") +JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") +JMESSAGE(JTRC_EOI, "End Of Image") +JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") +JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d") +JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, + "Warning: thumbnail image size does not match data length %u") +JMESSAGE(JTRC_JFIF_EXTENSION, + "JFIF extension marker: type 0x%02x, length %u") +JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") +JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u") +JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") +JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") +JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") +JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") +JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") +JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") +JMESSAGE(JTRC_RST, "RST%d") +JMESSAGE(JTRC_SMOOTH_NOTIMPL, + "Smoothing not supported with nonstandard sampling ratios") +JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") +JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") +JMESSAGE(JTRC_SOI, "Start of Image") +JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") +JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") +JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") +JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") +JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") +JMESSAGE(JTRC_THUMB_JPEG, + "JFIF extension marker: JPEG-compressed thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_PALETTE, + "JFIF extension marker: palette thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_RGB, + "JFIF extension marker: RGB thumbnail image, length %u") +JMESSAGE(JTRC_UNKNOWN_IDS, + "Unrecognized component IDs %d %d %d, assuming YCbCr") +JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") +JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") +JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") +JMESSAGE(JWRN_BOGUS_PROGRESSION, + "Inconsistent progression sequence for component %d coefficient %d") +JMESSAGE(JWRN_EXTRANEOUS_DATA, + "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") +JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") +JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") +JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") +JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") +JMESSAGE(JWRN_MUST_RESYNC, + "Corrupt JPEG data: found marker 0x%02x instead of RST%d") +JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") +JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTMSGCODE +} J_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE + + +#ifndef JERROR_H +#define JERROR_H + +/* Macros to simplify using the error and trace message stuff */ +/* The first parameter is either type of cinfo pointer */ + +/* Fatal errors (print message and exit) */ +#define ERREXIT(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT3(cinfo,code,p1,p2,p3) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXITS(cinfo,code,str) \ + ((cinfo)->err->msg_code = (code), \ + FXSYS_strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) + +#define MAKESTMT(stuff) do { stuff } while (0) + +/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ +#define WARNMS(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) + +/* Informational/debugging messages */ +#define TRACEMS(cinfo,lvl,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS1(cinfo,lvl,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS2(cinfo,lvl,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMSS(cinfo,lvl,code,str) \ + ((cinfo)->err->msg_code = (code), \ + FXSYS_strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) + +#endif /* JERROR_H */ diff --git a/third_party/libjpeg/jinclude.h b/third_party/libjpeg/jinclude.h new file mode 100644 index 0000000000..bae2b02a37 --- /dev/null +++ b/third_party/libjpeg/jinclude.h @@ -0,0 +1,102 @@ +/* + * jinclude.h + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file exists to provide a single place to fix any problems with + * including the wrong system include files. (Common problems are taken + * care of by the standard jconfig symbols, but on really weird systems + * you may have to edit this file.) + * + * NOTE: this file is NOT intended to be included by applications using the + * JPEG library. Most applications need only include jpeglib.h. + */ + + +/* Include auto-config file to find out which system include files we need. */ + +#include "jconfig.h" /* auto configuration options */ +#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ + +#include "../../core/include/fxcrt/fx_system.h" +/* + * We need the NULL macro and size_t typedef. + * On an ANSI-conforming system it is sufficient to include <stddef.h>. + * Otherwise, we get them from <stdlib.h> or <stdio.h>; we may have to + * pull in <sys/types.h> as well. + * Note that the core JPEG library does not require <stdio.h>; + * only the default error handler and data source/destination modules do. + * But we must pull it in because of the references to FILE in jpeglib.h. + * You can remove those references if you want to compile without <stdio.h>. + */ + +#ifdef _DEBUG +#define CRTDBG_MAP_ALLOC +//#include <stdlib.h> +//#include <crtdbg.h> +#endif + +#ifdef HAVE_STDDEF_H +#include <stddef.h> +#endif + +#ifdef HAVE_STDLIB_H +//#include <stdlib.h> +#endif + +#ifdef NEED_SYS_TYPES_H +#include <sys/types.h> +#endif + +#ifndef FAR +#define FAR +#endif + +//#include <stdio.h> + +/* + * We need memory copying and zeroing functions, plus strncpy(). + * ANSI and System V implementations declare these in <string.h>. + * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). + * Some systems may declare memset and memcpy in <memory.h>. + * + * NOTE: we assume the size parameters to these functions are of type size_t. + * Change the casts in these macros if not! + */ + +#ifdef NEED_BSD_STRINGS + +//#include <strings.h> +#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) +#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) + +#else /* not BSD, assume ANSI/SysV string lib */ + +//#include <string.h> +#define MEMZERO(target,size) FXSYS_memset((void *)(target), 0, (size_t)(size)) +#define MEMCOPY(dest,src,size) FXSYS_memcpy((void *)(dest), (const void *)(src), (size_t)(size)) + +#endif + +/* + * In ANSI C, and indeed any rational implementation, size_t is also the + * type returned by sizeof(). However, it seems there are some irrational + * implementations out there, in which sizeof() returns an int even though + * size_t is defined as long or unsigned long. To ensure consistent results + * we always use this SIZEOF() macro in place of using sizeof() directly. + */ + +#define SIZEOF(object) ((size_t) sizeof(object)) + +/* + * The modules that use fread() and fwrite() always invoke them through + * these macros. On some systems you may need to twiddle the argument casts. + * CAUTION: argument order is different from underlying functions! + */ + +#define JFREAD(file,buf,sizeofbuf) \ + ((size_t) FXSYS_fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) +#define JFWRITE(file,buf,sizeofbuf) \ + ((size_t) FXSYS_fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/third_party/libjpeg/jmemsys.h b/third_party/libjpeg/jmemsys.h new file mode 100644 index 0000000000..896688181b --- /dev/null +++ b/third_party/libjpeg/jmemsys.h @@ -0,0 +1,163 @@ +/* + * jmemsys.h + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file defines the interface between the system-independent + * and system-dependent portions of the JPEG memory manager. No other + * modules need include it. (The system-independent portion is jmemmgr.c; + * there are several different versions of the system-dependent portion.) + * + * This file works as-is for the system-dependent memory managers supplied + * in the IJG distribution. You may need to modify it if you write a + * custom memory manager. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_get_small jGetSmall +#define jpeg_free_small jFreeSmall +#define jpeg_get_large jGetLarge +#define jpeg_free_large jFreeLarge +#define jpeg_mem_available jMemAvail +#define jpeg_open_backing_store jOpenBackStore +#define jpeg_mem_init jMemInit +#define jpeg_mem_term jMemTerm +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * These two functions are used to allocate and release small chunks of + * memory. (Typically the total amount requested through jpeg_get_small is + * no more than 20K or so; this will be requested in chunks of a few K each.) + * Behavior should be the same as for the standard library functions malloc + * and free; in particular, jpeg_get_small must return NULL on failure. + * On most systems, these ARE malloc and free. jpeg_free_small is passed the + * size of the object being freed, just in case it's needed. + * On an 80x86 machine using small-data memory model, these manage near heap. + */ + +EXTERN(void *) jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); +EXTERN(void) jpeg_free_small JPP((j_common_ptr cinfo, void * object, + size_t sizeofobject)); + +/* + * These two functions are used to allocate and release large chunks of + * memory (up to the total free space designated by jpeg_mem_available). + * The interface is the same as above, except that on an 80x86 machine, + * far pointers are used. On most other machines these are identical to + * the jpeg_get/free_small routines; but we keep them separate anyway, + * in case a different allocation strategy is desirable for large chunks. + */ + +EXTERN(void FAR *) jpeg_get_large JPP((j_common_ptr cinfo, + size_t sizeofobject)); +EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, + size_t sizeofobject)); + +/* + * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may + * be requested in a single call to jpeg_get_large (and jpeg_get_small for that + * matter, but that case should never come into play). This macro is needed + * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. + * On those machines, we expect that jconfig.h will provide a proper value. + * On machines with 32-bit flat address spaces, any large constant may be used. + * + * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type + * size_t and will be a multiple of sizeof(align_type). + */ + +#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ +#define MAX_ALLOC_CHUNK 1000000000L +#endif + +/* + * This routine computes the total space still available for allocation by + * jpeg_get_large. If more space than this is needed, backing store will be + * used. NOTE: any memory already allocated must not be counted. + * + * There is a minimum space requirement, corresponding to the minimum + * feasible buffer sizes; jmemmgr.c will request that much space even if + * jpeg_mem_available returns zero. The maximum space needed, enough to hold + * all working storage in memory, is also passed in case it is useful. + * Finally, the total space already allocated is passed. If no better + * method is available, cinfo->mem->max_memory_to_use - already_allocated + * is often a suitable calculation. + * + * It is OK for jpeg_mem_available to underestimate the space available + * (that'll just lead to more backing-store access than is really necessary). + * However, an overestimate will lead to failure. Hence it's wise to subtract + * a slop factor from the true available space. 5% should be enough. + * + * On machines with lots of virtual memory, any large constant may be returned. + * Conversely, zero may be returned to always use the minimum amount of memory. + */ + +EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo, + long min_bytes_needed, + long max_bytes_needed, + long already_allocated)); + + +/* + * This structure holds whatever state is needed to access a single + * backing-store object. The read/write/close method pointers are called + * by jmemmgr.c to manipulate the backing-store object; all other fields + * are private to the system-dependent backing store routines. + */ + +#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ + +typedef struct backing_store_struct * backing_store_ptr; + +typedef struct backing_store_struct { + /* Methods for reading/writing/closing this backing-store object */ + JMETHOD(void, read_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, write_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, close_backing_store, (j_common_ptr cinfo, + backing_store_ptr info)); + + /* Private fields for system-dependent backing-store management */ + /* For a typical implementation with temp files, we need: */ + FXSYS_FILE * temp_file; /* stdio reference to temp file */ + char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ +} backing_store_info; + + +/* + * Initial opening of a backing-store object. This must fill in the + * read/write/close pointers in the object. The read/write routines + * may take an error exit if the specified maximum file size is exceeded. + * (If jpeg_mem_available always returns a large value, this routine can + * just take an error exit.) + */ + +EXTERN(void) jpeg_open_backing_store JPP((j_common_ptr cinfo, + backing_store_ptr info, + long total_bytes_needed)); + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. jpeg_mem_init will be called before anything is + * allocated (and, therefore, nothing in cinfo is of use except the error + * manager pointer). It should return a suitable default value for + * max_memory_to_use; this may subsequently be overridden by the surrounding + * application. (Note that max_memory_to_use is only important if + * jpeg_mem_available chooses to consult it ... no one else will.) + * jpeg_mem_term may assume that all requested memory has been freed and that + * all opened backing-store objects have been closed. + */ + +EXTERN(long) jpeg_mem_init JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_mem_term JPP((j_common_ptr cinfo)); diff --git a/third_party/libjpeg/jmorecfg.h b/third_party/libjpeg/jmorecfg.h new file mode 100644 index 0000000000..88d210954c --- /dev/null +++ b/third_party/libjpeg/jmorecfg.h @@ -0,0 +1,376 @@ +/* + * jmorecfg.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains additional configuration options that customize the + * JPEG software for special applications or support machine-dependent + * optimizations. Most users will not need to touch this file. + */ + +#ifdef _MSC_VER +#pragma warning (disable : 4142) +#endif + +/* + * Define BITS_IN_JSAMPLE as either + * 8 for 8-bit sample values (the usual setting) + * 12 for 12-bit sample values + * Only 8 and 12 are legal data precisions for lossy JPEG according to the + * JPEG standard, and the IJG code does not support anything else! + * We do not support run-time selection of data precision, sorry. + */ + +#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ + + +/* + * Maximum number of components (color channels) allowed in JPEG image. + * To meet the letter of the JPEG spec, set this to 255. However, darn + * few applications need more than 4 channels (maybe 5 for CMYK + alpha + * mask). We recommend 10 as a reasonable compromise; use 4 if you are + * really short on memory. (Each allowed component costs a hundred or so + * bytes of storage, whether actually used in an image or not.) + */ + +#define MAX_COMPONENTS 10 /* maximum number of image components */ + + +/* + * Basic data types. + * You may need to change these if you have a machine with unusual data + * type sizes; for example, "char" not 8 bits, "short" not 16 bits, + * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, + * but it had better be at least 16. + */ + +/* Representation of a single sample (pixel element value). + * We frequently allocate large arrays of these, so it's important to keep + * them small. But if you have memory to burn and access to char or short + * arrays is very slow on your hardware, you might want to change these. + */ + +#if BITS_IN_JSAMPLE == 8 +/* JSAMPLE should be the smallest type that will hold the values 0..255. + * You can use a signed char by having GETJSAMPLE mask it with 0xFF. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JSAMPLE; +#ifdef CHAR_IS_UNSIGNED +#define GETJSAMPLE(value) ((int) (value)) +#else +#define GETJSAMPLE(value) ((int) (value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + +#define MAXJSAMPLE 255 +#define CENTERJSAMPLE 128 + +#endif /* BITS_IN_JSAMPLE == 8 */ + + +#if BITS_IN_JSAMPLE == 12 +/* JSAMPLE should be the smallest type that will hold the values 0..4095. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 4095 +#define CENTERJSAMPLE 2048 + +#endif /* BITS_IN_JSAMPLE == 12 */ + + +/* Representation of a DCT frequency coefficient. + * This should be a signed value of at least 16 bits; "short" is usually OK. + * Again, we allocate large arrays of these, but you can change to int + * if you have memory to burn and "short" is really slow. + */ + +typedef short JCOEF; + + +/* Compressed datastreams are represented as arrays of JOCTET. + * These must be EXACTLY 8 bits wide, at least once they are written to + * external storage. Note that when using the stdio data source/destination + * managers, this is also the data type passed to fread/fwrite. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JOCTET; +#define GETJOCTET(value) (value) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JOCTET; +#ifdef CHAR_IS_UNSIGNED +#define GETJOCTET(value) (value) +#else +#define GETJOCTET(value) ((value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + + +/* These typedefs are used for various table entries and so forth. + * They must be at least as wide as specified; but making them too big + * won't cost a huge amount of memory, so we don't provide special + * extraction code like we did for JSAMPLE. (In other words, these + * typedefs live at a different point on the speed/space tradeoff curve.) + */ + +#if _FX_OS_ != _FX_VXWORKS_ + +/* UINT8 must hold at least the values 0..255. */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char UINT8; +#else /* not HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char UINT8; +#else /* not CHAR_IS_UNSIGNED */ +typedef short UINT8; +#endif /* CHAR_IS_UNSIGNED */ +#endif /* HAVE_UNSIGNED_CHAR */ + + +/* UINT16 must hold at least the values 0..65535. */ + +#ifdef HAVE_UNSIGNED_SHORT +typedef unsigned short UINT16; +#else /* not HAVE_UNSIGNED_SHORT */ +typedef unsigned int UINT16; +#endif /* HAVE_UNSIGNED_SHORT */ + +/* INT16 must hold at least the values -32768..32767. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ +typedef short INT16; +#endif + +/* INT32 must hold at least signed 32-bit values. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ +typedef int INT32; +#endif + +#endif + +/* Datatype used for image dimensions. The JPEG standard only supports + * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore + * "unsigned int" is sufficient on all machines. However, if you need to + * handle larger images and you don't mind deviating from the spec, you + * can change this datatype. + */ + +typedef unsigned int JDIMENSION; + +#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ + + +/* These macros are used in all function definitions and extern declarations. + * You could modify them if you need to change function linkage conventions; + * in particular, you'll need to do that to make the library a Windows DLL. + * Another application is to make all functions global for use with debuggers + * or code profilers that require it. + */ + +/* a function called through method pointers: */ +#define METHODDEF(type) static type +/* a function used only in its module: */ +#define LOCAL(type) static type +/* a function referenced thru EXTERNs: */ +#define GLOBAL(type) type + +#ifdef _FX_MANAGED_CODE_ +#define EXTERN(type) extern "C" type +#else +/* a reference to a GLOBAL function: */ +#define EXTERN(type) extern type +#endif + + +/* This macro is used to declare a "method", that is, a function pointer. + * We want to supply prototype parameters if the compiler can cope. + * Note that the arglist parameter must be parenthesized! + * Again, you can customize this if you need special linkage keywords. + */ + +#ifdef HAVE_PROTOTYPES +#define JMETHOD(type,methodname,arglist) type (*methodname) arglist +#else +#define JMETHOD(type,methodname,arglist) type (*methodname) () +#endif + + +/* Here is the pseudo-keyword for declaring pointers that must be "far" + * on 80x86 machines. Most of the specialized coding for 80x86 is handled + * by just saying "FAR *" where such a pointer is needed. In a few places + * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. + */ + +#ifdef NEED_FAR_POINTERS +#define FAR far +#else +//#define FAR +#endif + + +/* + * On a few systems, type boolean and/or its values FALSE, TRUE may appear + * in standard header files. Or you may have conflicts with application- + * specific header files that you want to include together with these files. + * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. + */ + +#ifndef HAVE_BOOLEAN +typedef int boolean; +#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif + + +/* + * The remaining options affect code selection within the JPEG library, + * but they don't need to be visible to most applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. + */ + +#ifdef JPEG_INTERNALS +#define JPEG_INTERNAL_OPTIONS +#endif + +#ifdef JPEG_INTERNAL_OPTIONS + + +/* + * These defines indicate whether to include various optional functions. + * Undefining some of these symbols will produce a smaller but less capable + * library. Note that you can leave certain source files out of the + * compilation/linking process if you've #undef'd the corresponding symbols. + * (You may HAVE to do that if your compiler doesn't like null source files.) + */ + +/* Arithmetic coding is unsupported for legal reasons. Complaints to IBM. */ + +/* Capability options common to encoder and decoder: */ + +#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ +#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ +#undef DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ + +/* Encoder capability options: */ + +#undef C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ +/* Note: if you selected 12-bit data precision, it is dangerous to turn off + * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit + * precision, so jchuff.c normally uses entropy optimization to compute + * usable tables for higher precision. If you don't want to do optimization, + * you'll have to supply different default Huffman tables. + * The exact same statements apply for progressive JPEG: the default tables + * don't work for progressive mode. (This may get fixed, however.) + */ +#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ + +/* Decoder capability options: */ + +#undef D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ +#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ +#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ +#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ +#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ +#undef QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ +#undef QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ + +/* more capability options later, no doubt */ + + +/* + * Ordering of RGB data in scanlines passed to or from the application. + * If your application wants to deal with data in the order B,G,R, just + * change these macros. You can also deal with formats such as R,G,B,X + * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing + * the offsets will also change the order in which colormap data is organized. + * RESTRICTIONS: + * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. + * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not + * useful if you are using JPEG color spaces other than YCbCr or grayscale. + * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE + * is not 3 (they don't understand about dummy color components!). So you + * can't use color quantization if you change that value. + */ + +#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ +#define RGB_GREEN 1 /* Offset of Green */ +#define RGB_BLUE 2 /* Offset of Blue */ +#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */ + + +/* Definitions for speed-related optimizations. */ + + +/* If your compiler supports inline functions, define INLINE + * as the inline keyword; otherwise define it as empty. + */ + +#ifndef INLINE +#ifdef __GNUC__ /* for instance, GNU C knows about inline */ +#define INLINE __inline__ +#endif +#ifndef INLINE +#define INLINE /* default is to define it as empty */ +#endif +#endif + + +/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying + * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER + * as short on such a machine. MULTIPLIER must be at least 16 bits wide. + */ + +#ifndef MULTIPLIER +#define MULTIPLIER int /* type for fastest integer multiply */ +#endif + + +/* FAST_FLOAT should be either float or double, whichever is done faster + * by your compiler. (Note that this type is only used in the floating point + * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) + * Typically, float is faster in ANSI C compilers, while double is faster in + * pre-ANSI compilers (because they insist on converting to double anyway). + * The code below therefore chooses float if we have ANSI-style prototypes. + */ + +#ifndef FAST_FLOAT +#ifdef HAVE_PROTOTYPES +#define FAST_FLOAT float +#else +#define FAST_FLOAT double +#endif +#endif + +#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/third_party/libjpeg/jpegint.h b/third_party/libjpeg/jpegint.h new file mode 100644 index 0000000000..95b00d405c --- /dev/null +++ b/third_party/libjpeg/jpegint.h @@ -0,0 +1,392 @@ +/* + * jpegint.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides common declarations for the various JPEG modules. + * These declarations are considered internal to the JPEG library; most + * applications using the library shouldn't need to include this file. + */ + + +/* Declarations for both compression & decompression */ + +typedef enum { /* Operating modes for buffer controllers */ + JBUF_PASS_THRU, /* Plain stripwise operation */ + /* Remaining modes require a full-image buffer to have been created */ + JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ + JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ + JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ +} J_BUF_MODE; + +/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ +#define CSTATE_START 100 /* after create_compress */ +#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ +#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ +#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ +#define DSTATE_START 200 /* after create_decompress */ +#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ +#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ +#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ +#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ +#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ +#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ +#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ +#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ +#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ +#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ + + +/* Declarations for compression modules */ + +/* Master control module */ +struct jpeg_comp_master { + JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); + JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean call_pass_startup; /* True if pass_startup must be called */ + boolean is_last_pass; /* True during last pass */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_c_main_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail)); +}; + +/* Compression preprocessing (downsampling input buffer control) */ +struct jpeg_c_prep_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, + JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_c_coef_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf)); +}; + +/* Colorspace conversion */ +struct jpeg_color_converter { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, color_convert, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows)); +}; + +/* Downsampling */ +struct jpeg_downsampler { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, downsample, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, + JDIMENSION out_row_group_index)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Forward DCT (also controls coefficient quantization) */ +struct jpeg_forward_dct { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + /* perhaps this should be an array??? */ + JMETHOD(void, forward_DCT, (j_compress_ptr cinfo, + jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks)); +}; + +/* Entropy encoding */ +struct jpeg_entropy_encoder { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); + JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); +}; + +/* Marker writing */ +struct jpeg_marker_writer { + JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); + JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); + /* These routines are exported to allow insertion of extra markers */ + /* Probably only COM and APPn markers should be written this way */ + JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker, + unsigned int datalen)); + JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); +}; + + +/* Declarations for decompression modules */ + +/* Master control module */ +struct jpeg_decomp_master { + JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ +}; + +/* Input control module */ +struct jpeg_input_controller { + JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); + JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean has_multiple_scans; /* True if file has multiple scans */ + boolean eoi_reached; /* True when EOI has been consumed */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_d_main_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_d_coef_controller { + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); + JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, + JSAMPIMAGE output_buf)); + /* Pointer to array of coefficient virtual arrays, or NULL if none */ + jvirt_barray_ptr *coef_arrays; +}; + +/* Decompression postprocessing (color quantization buffer control) */ +struct jpeg_d_post_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Marker reading & parsing */ +struct jpeg_marker_reader { + JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); + /* Read markers until SOS or EOI. + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); + /* Read a restart marker --- exported for use by entropy decoder only */ + jpeg_marker_parser_method read_restart_marker; + + /* State of marker reader --- nominally internal, but applications + * supplying COM or APPn handlers might like to know the state. + */ + boolean saw_SOI; /* found SOI? */ + boolean saw_SOF; /* found SOF? */ + int next_restart_num; /* next restart number expected (0-7) */ + unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ +}; + +/* Entropy decoding */ +struct jpeg_entropy_decoder { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); + + /* This is here to share code between baseline and progressive decoders; */ + /* other modules probably should not use it */ + boolean insufficient_data; /* set TRUE after emitting warning */ +}; + +/* Inverse DCT (also performs dequantization) */ +typedef JMETHOD(void, inverse_DCT_method_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col)); + +struct jpeg_inverse_dct { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + /* It is useful to allow each component to have a separate IDCT method. */ + inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; +}; + +/* Upsampling (note that upsampler must also call color converter) */ +struct jpeg_upsampler { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, upsample, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Colorspace conversion */ +struct jpeg_color_deconverter { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, color_convert, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows)); +}; + +/* Color quantization or color precision reduction */ +struct jpeg_color_quantizer { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); + JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, + int num_rows)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); +}; + + +/* Miscellaneous useful macros */ + +#undef MAX +#define MAX(a,b) ((a) > (b) ? (a) : (b)) +#undef MIN +#define MIN(a,b) ((a) < (b) ? (a) : (b)) + + +/* We assume that right shift corresponds to signed division by 2 with + * rounding towards minus infinity. This is correct for typical "arithmetic + * shift" instructions that shift in copies of the sign bit. But some + * C compilers implement >> with an unsigned shift. For these machines you + * must define RIGHT_SHIFT_IS_UNSIGNED. + * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. + * It is only applied with constant shift counts. SHIFT_TEMPS must be + * included in the variables of any routine using RIGHT_SHIFT. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define SHIFT_TEMPS INT32 shift_temp; +#define RIGHT_SHIFT(x,shft) \ + ((shift_temp = (x)) < 0 ? \ + (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ + (shift_temp >> (shft))) +#else +#define SHIFT_TEMPS +#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_compress_master jICompress +#define jinit_c_master_control jICMaster +#define jinit_c_main_controller jICMainC +#define jinit_c_prep_controller jICPrepC +#define jinit_c_coef_controller jICCoefC +#define jinit_color_converter jICColor +#define jinit_downsampler jIDownsampler +#define jinit_forward_dct jIFDCT +#define jinit_huff_encoder jIHEncoder +#define jinit_phuff_encoder jIPHEncoder +#define jinit_marker_writer jIMWriter +#define jinit_master_decompress jIDMaster +#define jinit_d_main_controller jIDMainC +#define jinit_d_coef_controller jIDCoefC +#define jinit_d_post_controller jIDPostC +#define jinit_input_controller jIInCtlr +#define jinit_marker_reader jIMReader +#define jinit_huff_decoder jIHDecoder +#define jinit_phuff_decoder jIPHDecoder +#define jinit_inverse_dct jIIDCT +#define jinit_upsampler jIUpsampler +#define jinit_color_deconverter jIDColor +#define jinit_1pass_quantizer jI1Quant +#define jinit_2pass_quantizer jI2Quant +#define jinit_merged_upsampler jIMUpsampler +#define jinit_memory_mgr jIMemMgr +#define jdiv_round_up jDivRound +#define jround_up jRound +#define jcopy_sample_rows jCopySamples +#define jcopy_block_row jCopyBlocks +#define jzero_far jZeroFar +#define jpeg_zigzag_order jZIGTable +#define jpeg_natural_order jZAGTable +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Compression module initialization routines */ +EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, + boolean transcode_only)); +EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_phuff_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); +/* Decompression module initialization routines */ +EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_phuff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); +/* Memory manager initialization */ +EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); + +/* Utility routines in jutils.c */ +EXTERN(long) jdiv_round_up JPP((long a, long b)); +EXTERN(long) jround_up JPP((long a, long b)); +EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols)); +EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks)); +EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); +/* Constant tables in jutils.c */ +#if 0 /* This table is not actually needed in v6a */ +extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ +#endif +extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ + +/* Suppress undefined-structure complaints if necessary. */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +#endif +#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/third_party/libjpeg/jpeglib.h b/third_party/libjpeg/jpeglib.h new file mode 100644 index 0000000000..7de5ab726e --- /dev/null +++ b/third_party/libjpeg/jpeglib.h @@ -0,0 +1,1165 @@ +/* + * jpeglib.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +#define FOXIT_PREFIX(origName) FPDFAPIJPEG_##origName + +#define jcopy_block_row FOXIT_PREFIX(jcopy_block_row) +#define jcopy_sample_rows FOXIT_PREFIX(jcopy_sample_rows) +#define jdiv_round_up FOXIT_PREFIX(jdiv_round_up) +#define jinit_1pass_quantizer FOXIT_PREFIX(jinit_1pass_quantizer) +#define jinit_2pass_quantizer FOXIT_PREFIX(jinit_2pass_quantizer) +#define jinit_color_deconverter FOXIT_PREFIX(jinit_color_deconverter) +#define jinit_d_coef_controller FOXIT_PREFIX(jinit_d_coef_controller) +#define jinit_d_main_controller FOXIT_PREFIX(jinit_d_main_controller) +#define jinit_d_post_controller FOXIT_PREFIX(jinit_d_post_controller) +#define jinit_huff_decoder FOXIT_PREFIX(jinit_huff_decoder) +#define jinit_input_controller FOXIT_PREFIX(jinit_input_controller) +#define jinit_inverse_dct FOXIT_PREFIX(jinit_inverse_dct) +#define jinit_marker_reader FOXIT_PREFIX(jinit_marker_reader) +#define jinit_master_decompress FOXIT_PREFIX(jinit_master_decompress) +#define jinit_memory_mgr FOXIT_PREFIX(jinit_memory_mgr) +#define jinit_merged_upsampler FOXIT_PREFIX(jinit_merged_upsampler) +#define jinit_phuff_decoder FOXIT_PREFIX(jinit_phuff_decoder) +#define jinit_upsampler FOXIT_PREFIX(jinit_upsampler) +#define jpeg_CreateDecompress FOXIT_PREFIX(jpeg_CreateDecompress) +#define jpeg_abort FOXIT_PREFIX(jpeg_abort) +#define jpeg_abort_decompress FOXIT_PREFIX(jpeg_abort_decompress) +#define jpeg_alloc_huff_table FOXIT_PREFIX(jpeg_alloc_huff_table) +#define jpeg_alloc_quant_table FOXIT_PREFIX(jpeg_alloc_quant_table) +#define jpeg_calc_output_dimensions FOXIT_PREFIX(jpeg_calc_output_dimensions) +#define jpeg_consume_input FOXIT_PREFIX(jpeg_consume_input) +#define jpeg_destroy FOXIT_PREFIX(jpeg_destroy) +#define jpeg_destroy_decompress FOXIT_PREFIX(jpeg_destroy_decompress) +#define jpeg_fill_bit_buffer FOXIT_PREFIX(jpeg_fill_bit_buffer) +#define jpeg_finish_decompress FOXIT_PREFIX(jpeg_finish_decompress) +#define jpeg_finish_output FOXIT_PREFIX(jpeg_finish_output) +#define jpeg_free_large FOXIT_PREFIX(jpeg_free_large) +#define jpeg_free_small FOXIT_PREFIX(jpeg_free_small) +#define jpeg_get_large FOXIT_PREFIX(jpeg_get_large) +#define jpeg_get_small FOXIT_PREFIX(jpeg_get_small) +#define jpeg_has_multiple_scans FOXIT_PREFIX(jpeg_has_multiple_scans) +#define jpeg_huff_decode FOXIT_PREFIX(jpeg_huff_decode) +#define jpeg_idct_1x1 FOXIT_PREFIX(jpeg_idct_1x1) +#define jpeg_idct_2x2 FOXIT_PREFIX(jpeg_idct_2x2) +#define jpeg_idct_4x4 FOXIT_PREFIX(jpeg_idct_4x4) +#define jpeg_idct_float FOXIT_PREFIX(jpeg_idct_float) +#define jpeg_idct_ifast FOXIT_PREFIX(jpeg_idct_ifast) +#define jpeg_idct_islow FOXIT_PREFIX(jpeg_idct_islow) +#define jpeg_input_complete FOXIT_PREFIX(jpeg_input_complete) +#define jpeg_make_d_derived_tbl FOXIT_PREFIX(jpeg_make_d_derived_tbl) +#define jpeg_mem_available FOXIT_PREFIX(jpeg_mem_available) +#define jpeg_mem_init FOXIT_PREFIX(jpeg_mem_init) +#define jpeg_mem_term FOXIT_PREFIX(jpeg_mem_term) +#define jpeg_natural_order FOXIT_PREFIX(jpeg_natural_order) +#define jpeg_new_colormap FOXIT_PREFIX(jpeg_new_colormap) +#define jpeg_open_backing_store FOXIT_PREFIX(jpeg_open_backing_store) +#define jpeg_read_coefficients FOXIT_PREFIX(jpeg_read_coefficients) +#define jpeg_read_header FOXIT_PREFIX(jpeg_read_header) +#define jpeg_read_raw_data FOXIT_PREFIX(jpeg_read_raw_data) +#define jpeg_read_scanlines FOXIT_PREFIX(jpeg_read_scanlines) +#define jpeg_resync_to_restart FOXIT_PREFIX(jpeg_resync_to_restart) +#define jpeg_save_markers FOXIT_PREFIX(jpeg_save_markers) +#define jpeg_set_marker_processor FOXIT_PREFIX(jpeg_set_marker_processor) +#define jpeg_start_decompress FOXIT_PREFIX(jpeg_start_decompress) +#define jpeg_start_output FOXIT_PREFIX(jpeg_start_output) +#define jpeg_std_error FOXIT_PREFIX(jpeg_std_error) +#define jpeg_std_message_table FOXIT_PREFIX(jpeg_std_message_table) +#define jpeg_stdio_src FOXIT_PREFIX(jpeg_stdio_src) +#define jround_up FOXIT_PREFIX(jround_up) +#define jzero_far FOXIT_PREFIX(jzero_far) + + /* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jconfig.h" /* widely used configuration options */ +#endif +#include "jmorecfg.h" /* seldom changed options */ + + +/* Version ID for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60". + */ + +#define JPEG_LIB_VERSION 62 /* Version 6b */ + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, so don't change them + * if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This array gives the coefficient quantizers in natural array order + * (not the zigzag order in which they are stored in a JPEG DQT marker). + * CAUTION: IJG versions prior to v6a kept this array in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples. Always DCTSIZE for compression. + * For decompression this is the size of the output from one DCT block, + * reflecting any scaling we choose to apply during the IDCT step. + * Values of 1,2,4,8 are likely to be supported. Note that different + * components may receive different IDCT scalings. + */ + int DCT_scaled_size; + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface), thus + * downsampled_width = ceil(image_width * Hi/Hmax) + * and similarly for height. For decompression, IDCT scaling is included, so + * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE) + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* This flag is used only for decompression. In cases where some of the + * components will be ignored (eg grayscale output from YCbCr image), + * we can skip most computations for the unused components. + */ + boolean component_needed; /* do we need the value of this component? */ + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is currently used only for decompression. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + +/* The decompressor can save APPn and COM markers in a list of these: */ + +typedef struct jpeg_marker_struct * jpeg_saved_marker_ptr; + +struct jpeg_marker_struct { + jpeg_saved_marker_ptr next; /* next in list, or NULL */ + UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ + unsigned int original_length; /* # bytes of data in the file */ + unsigned int data_length; /* # bytes of data saved at data[] */ + JOCTET * data; /* the data contained in the marker */ + /* the marker length word is not counted in data_length or original_length */ +}; + +/* Known color spaces. */ + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK /* Y/Cb/Cr/K */ +} J_COLOR_SPACE; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + void * client_data; /* Available for use by application */\ + boolean is_decompressor; /* So common code can tell which is which */\ + int global_state /* For checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + UINT8 JFIF_major_version; /* What to write for the JFIF version number */ + UINT8 JFIF_minor_version; + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; + jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ + int script_space_size; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ + UINT8 JFIF_major_version; /* JFIF version number */ + UINT8 JFIF_minor_version; + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Aside from the specific data retained from APPn markers known to the + * library, the uninterpreted contents of any or all APPn and COM markers + * can be saved in a list for examination by the application. + */ + jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(void, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; + + /* Maximum allocation request accepted by alloc_large. */ + long max_alloc_chunk; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_CreateCompress jCreaCompress +#define jpeg_CreateDecompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_m_header jWrtMHeader +#define jpeg_write_m_byte jWrtMByte +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_save_markers jSaveMarkers +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN(struct jpeg_error_mgr *) jpeg_std_error + JPP((struct jpeg_error_mgr * err)); + +/* Initialization of JPEG compression objects. + * jpeg_create_compress() and jpeg_create_decompress() are the exported + * names that applications should call. These expand to calls on + * jpeg_CreateCompress and jpeg_CreateDecompress with additional information + * passed for version mismatch checking. + * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. + */ +#define jpeg_create_compress(cinfo) \ + jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_compress_struct)) +#define jpeg_create_decompress(cinfo) \ + jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_decompress_struct)) +EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, + int version, size_t structsize)); +EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, + int version, size_t structsize)); +/* Destruction of JPEG compression objects */ +EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +#if 0 +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FXSYS_FILE * outfile)); +EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FXSYS_FILE * infile)); +#endif + +/* Default parameter setup for compression */ +EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN(int) jpeg_quality_scaling JPP((int quality)); +EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.doc concerning safe usage. */ +EXTERN(void) jpeg_write_marker + JPP((j_compress_ptr cinfo, int marker, + const JOCTET * dataptr, unsigned int datalen)); +/* Same, but piecemeal. */ +EXTERN(void) jpeg_write_m_header + JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); +EXTERN(void) jpeg_write_m_byte + JPP((j_compress_ptr cinfo, int val)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Control saving of COM and APPn markers into marker_list. */ +EXTERN(void) jpeg_save_markers + JPP((j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN(void) jpeg_set_marker_processor + JPP((j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#endif /* JPEGLIB_H */ diff --git a/third_party/libjpeg/jversion.h b/third_party/libjpeg/jversion.h new file mode 100644 index 0000000000..6472c58d35 --- /dev/null +++ b/third_party/libjpeg/jversion.h @@ -0,0 +1,14 @@ +/* + * jversion.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains software version identification. + */ + + +#define JVERSION "6b 27-Mar-1998" + +#define JCOPYRIGHT "Copyright (C) 1998, Thomas G. Lane" diff --git a/third_party/libjpeg/transupp.h b/third_party/libjpeg/transupp.h new file mode 100644 index 0000000000..5c2d32aff5 --- /dev/null +++ b/third_party/libjpeg/transupp.h @@ -0,0 +1,135 @@ +/* + * transupp.h + * + * Copyright (C) 1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for image transformation routines and + * other utility code used by the jpegtran sample application. These are + * NOT part of the core JPEG library. But we keep these routines separate + * from jpegtran.c to ease the task of maintaining jpegtran-like programs + * that have other user interfaces. + * + * NOTE: all the routines declared here have very specific requirements + * about when they are to be executed during the reading and writing of the + * source and destination files. See the comments in transupp.c, or see + * jpegtran.c for an example of correct usage. + */ + +/* If you happen not to want the image transform support, disable it here */ +#ifndef TRANSFORMS_SUPPORTED +#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ +#endif + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jtransform_request_workspace jTrRequest +#define jtransform_adjust_parameters jTrAdjust +#define jtransform_execute_transformation jTrExec +#define jcopy_markers_setup jCMrkSetup +#define jcopy_markers_execute jCMrkExec +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * Codes for supported types of image transformations. + */ + +typedef enum { + JXFORM_NONE, /* no transformation */ + JXFORM_FLIP_H, /* horizontal flip */ + JXFORM_FLIP_V, /* vertical flip */ + JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ + JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ + JXFORM_ROT_90, /* 90-degree clockwise rotation */ + JXFORM_ROT_180, /* 180-degree rotation */ + JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ +} JXFORM_CODE; + +/* + * Although rotating and flipping data expressed as DCT coefficients is not + * hard, there is an asymmetry in the JPEG format specification for images + * whose dimensions aren't multiples of the iMCU size. The right and bottom + * image edges are padded out to the next iMCU boundary with junk data; but + * no padding is possible at the top and left edges. If we were to flip + * the whole image including the pad data, then pad garbage would become + * visible at the top and/or left, and real pixels would disappear into the + * pad margins --- perhaps permanently, since encoders & decoders may not + * bother to preserve DCT blocks that appear to be completely outside the + * nominal image area. So, we have to exclude any partial iMCUs from the + * basic transformation. + * + * Transpose is the only transformation that can handle partial iMCUs at the + * right and bottom edges completely cleanly. flip_h can flip partial iMCUs + * at the bottom, but leaves any partial iMCUs at the right edge untouched. + * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. + * The other transforms are defined as combinations of these basic transforms + * and process edge blocks in a way that preserves the equivalence. + * + * The "trim" option causes untransformable partial iMCUs to be dropped; + * this is not strictly lossless, but it usually gives the best-looking + * result for odd-size images. Note that when this option is active, + * the expected mathematical equivalences between the transforms may not hold. + * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim + * followed by -rot 180 -trim trims both edges.) + * + * We also offer a "force to grayscale" option, which simply discards the + * chrominance channels of a YCbCr image. This is lossless in the sense that + * the luminance channel is preserved exactly. It's not the same kind of + * thing as the rotate/flip transformations, but it's convenient to handle it + * as part of this package, mainly because the transformation routines have to + * be aware of the option to know how many components to work on. + */ + +typedef struct { + /* Options: set by caller */ + JXFORM_CODE transform; /* image transform operator */ + boolean trim; /* if TRUE, trim partial MCUs as needed */ + boolean force_grayscale; /* if TRUE, convert color image to grayscale */ + + /* Internal workspace: caller should not touch these */ + int num_components; /* # of components in workspace */ + jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ +} jpeg_transform_info; + + +#if TRANSFORMS_SUPPORTED + +/* Request any required workspace */ +EXTERN(void) jtransform_request_workspace + JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); +/* Adjust output image parameters */ +EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Execute the actual transformation, if any */ +EXTERN(void) jtransform_execute_transformation + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* + * Support for copying optional markers from source to destination file. + */ + +typedef enum { + JCOPYOPT_NONE, /* copy no optional markers */ + JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ + JCOPYOPT_ALL /* copy all optional markers */ +} JCOPY_OPTION; + +#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ + +/* Setup decompression object to save desired markers in memory */ +EXTERN(void) jcopy_markers_setup + JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); +/* Copy markers saved in the given source object to the destination object */ +EXTERN(void) jcopy_markers_execute + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option)); diff --git a/third_party/third_party.gyp b/third_party/third_party.gyp index 524416289e..6dbff565a4 100644 --- a/third_party/third_party.gyp +++ b/third_party/third_party.gyp @@ -130,6 +130,76 @@ ], }, { + 'target_name': 'fx_libjpeg', + 'type': 'static_library', + 'sources': [ + 'libjpeg/cderror.h', + 'libjpeg/cdjpeg.h', + 'libjpeg/fpdfapi_jcapimin.c', + 'libjpeg/fpdfapi_jcapistd.c', + 'libjpeg/fpdfapi_jccoefct.c', + 'libjpeg/fpdfapi_jccolor.c', + 'libjpeg/fpdfapi_jcdctmgr.c', + 'libjpeg/fpdfapi_jchuff.c', + 'libjpeg/fpdfapi_jcinit.c', + 'libjpeg/fpdfapi_jcmainct.c', + 'libjpeg/fpdfapi_jcmarker.c', + 'libjpeg/fpdfapi_jcmaster.c', + 'libjpeg/fpdfapi_jcomapi.c', + 'libjpeg/fpdfapi_jcparam.c', + 'libjpeg/fpdfapi_jcphuff.c', + 'libjpeg/fpdfapi_jcprepct.c', + 'libjpeg/fpdfapi_jcsample.c', + 'libjpeg/fpdfapi_jctrans.c', + 'libjpeg/fpdfapi_jdapimin.c', + 'libjpeg/fpdfapi_jdapistd.c', + 'libjpeg/fpdfapi_jdcoefct.c', + 'libjpeg/fpdfapi_jdcolor.c', + 'libjpeg/fpdfapi_jddctmgr.c', + 'libjpeg/fpdfapi_jdhuff.c', + 'libjpeg/fpdfapi_jdinput.c', + 'libjpeg/fpdfapi_jdmainct.c', + 'libjpeg/fpdfapi_jdmarker.c', + 'libjpeg/fpdfapi_jdmaster.c', + 'libjpeg/fpdfapi_jdmerge.c', + 'libjpeg/fpdfapi_jdphuff.c', + 'libjpeg/fpdfapi_jdpostct.c', + 'libjpeg/fpdfapi_jdsample.c', + 'libjpeg/fpdfapi_jdtrans.c', + 'libjpeg/fpdfapi_jerror.c', + 'libjpeg/fpdfapi_jfdctfst.c', + 'libjpeg/fpdfapi_jfdctint.c', + 'libjpeg/fpdfapi_jidctfst.c', + 'libjpeg/fpdfapi_jidctint.c', + 'libjpeg/fpdfapi_jidctred.c', + 'libjpeg/fpdfapi_jmemmgr.c', + 'libjpeg/fpdfapi_jmemnobs.c', + 'libjpeg/fpdfapi_jutils.c', + 'libjpeg/jchuff.h', + 'libjpeg/jconfig.h', + 'libjpeg/jdct.h', + 'libjpeg/jdhuff.h', + 'libjpeg/jerror.h', + 'libjpeg/jinclude.h', + 'libjpeg/jmemsys.h', + 'libjpeg/jmorecfg.h', + 'libjpeg/jpegint.h', + 'libjpeg/jpeglib.h', + 'libjpeg/jversion.h', + 'libjpeg/makefile', + 'libjpeg/transupp.h', + ], + 'conditions': [ + ['os_posix==1', { + 'cflags': [ + '-Wno-main', + '-Wno-missing-braces', + '-Wno-unused', + ], + }], + ], + }, + { 'target_name': 'pdfium_base', 'type': 'none', 'sources': [ |