diff options
Diffstat (limited to 'arch/arm/include/asm/arch-imx8/sci/svc')
| -rw-r--r-- | arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h | 31 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h | 57 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h | 44 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h | 69 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h | 37 |
5 files changed, 0 insertions, 238 deletions
diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h deleted file mode 100644 index 3629eb6..0000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_MISC_API_H -#define SC_MISC_API_H - -/* Defines for sc_misc_boot_status_t */ -#define SC_MISC_BOOT_STATUS_SUCCESS 0U /* Success */ -#define SC_MISC_BOOT_STATUS_SECURITY 1U /* Security violation */ - -/* Defines for sc_misc_seco_auth_cmd_t */ -#define SC_MISC_SECO_AUTH_SECO_FW 0U /* SECO Firmware */ -#define SC_MISC_SECO_AUTH_HDMI_TX_FW 1U /* HDMI TX Firmware */ -#define SC_MISC_SECO_AUTH_HDMI_RX_FW 2U /* HDMI RX Firmware */ - -/* Defines for sc_misc_temp_t */ -#define SC_MISC_TEMP 0U /* Temp sensor */ -#define SC_MISC_TEMP_HIGH 1U /* Temp high alarm */ -#define SC_MISC_TEMP_LOW 2U /* Temp low alarm */ - -/* Defines for sc_misc_seco_auth_cmd_t */ -#define SC_MISC_AUTH_CONTAINER 0U /* Authenticate container */ -#define SC_MISC_VERIFY_IMAGE 1U /* Verify image */ -#define SC_MISC_REL_CONTAINER 2U /* Release container */ - -typedef u8 sc_misc_boot_status_t; -typedef u8 sc_misc_temp_t; - -#endif /* SC_MISC_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h deleted file mode 100644 index 905c568..0000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_PAD_API_H -#define SC_PAD_API_H - -/* Defines for sc_pad_config_t */ -#define SC_PAD_CONFIG_NORMAL 0U /* Normal */ -#define SC_PAD_CONFIG_OD 1U /* Open Drain */ -#define SC_PAD_CONFIG_OD_IN 2U /* Open Drain and input */ -#define SC_PAD_CONFIG_OUT_IN 3U /* Output and input */ - -/* Defines for sc_pad_iso_t */ -#define SC_PAD_ISO_OFF 0U /* ISO latch is transparent */ -#define SC_PAD_ISO_EARLY 1U /* Follow EARLY_ISO */ -#define SC_PAD_ISO_LATE 2U /* Follow LATE_ISO */ -#define SC_PAD_ISO_ON 3U /* ISO latched data is held */ - -/* Defines for sc_pad_28fdsoi_dse_t */ -#define SC_PAD_28FDSOI_DSE_18V_1MA 0U /* Drive strength of 1mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_2MA 1U /* Drive strength of 2mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_4MA 2U /* Drive strength of 4mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_6MA 3U /* Drive strength of 6mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_8MA 4U /* Drive strength of 8mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_10MA 5U /* Drive strength of 10mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_12MA 6U /* Drive strength of 12mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_HS 7U /* High-speed for 1.8v */ -#define SC_PAD_28FDSOI_DSE_33V_2MA 0U /* Drive strength of 2mA for 3.3v */ -#define SC_PAD_28FDSOI_DSE_33V_4MA 1U /* Drive strength of 4mA for 3.3v */ -#define SC_PAD_28FDSOI_DSE_33V_8MA 2U /* Drive strength of 8mA for 3.3v */ -#define SC_PAD_28FDSOI_DSE_33V_12MA 3U /* Drive strength of 12mA for 3.3v */ -#define SC_PAD_28FDSOI_DSE_DV_HIGH 0U /* High drive strength dual volt */ -#define SC_PAD_28FDSOI_DSE_DV_LOW 1U /* Low drive strength dual volt */ - -/* Defines for sc_pad_28fdsoi_ps_t */ -#define SC_PAD_28FDSOI_PS_KEEPER 0U /* Bus-keeper (only valid for 1.8v) */ -#define SC_PAD_28FDSOI_PS_PU 1U /* Pull-up */ -#define SC_PAD_28FDSOI_PS_PD 2U /* Pull-down */ -#define SC_PAD_28FDSOI_PS_NONE 3U /* No pull (disabled) */ - -/* Defines for sc_pad_28fdsoi_pus_t */ -#define SC_PAD_28FDSOI_PUS_30K_PD 0U /* 30K pull-down */ -#define SC_PAD_28FDSOI_PUS_100K_PU 1U /* 100K pull-up */ -#define SC_PAD_28FDSOI_PUS_3K_PU 2U /* 3K pull-up */ -#define SC_PAD_28FDSOI_PUS_30K_PU 3U /* 30K pull-up */ - -/* Defines for sc_pad_wakeup_t */ -#define SC_PAD_WAKEUP_OFF 0U /* Off */ -#define SC_PAD_WAKEUP_CLEAR 1U /* Clears pending flag */ -#define SC_PAD_WAKEUP_LOW_LVL 4U /* Low level */ -#define SC_PAD_WAKEUP_FALL_EDGE 5U /* Falling edge */ -#define SC_PAD_WAKEUP_RISE_EDGE 6U /* Rising edge */ -#define SC_PAD_WAKEUP_HIGH_LVL 7U /* High-level */ - -#endif /* SC_PAD_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h deleted file mode 100644 index 9008b85..0000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_PM_API_H -#define SC_PM_API_H - -/* Defines for sc_pm_power_mode_t */ -#define SC_PM_PW_MODE_OFF 0U /* Power off */ -#define SC_PM_PW_MODE_STBY 1U /* Power in standby */ -#define SC_PM_PW_MODE_LP 2U /* Power in low-power */ -#define SC_PM_PW_MODE_ON 3U /* Power on */ - -/* Defines for sc_pm_clk_t */ -#define SC_PM_CLK_SLV_BUS 0U /* Slave bus clock */ -#define SC_PM_CLK_MST_BUS 1U /* Master bus clock */ -#define SC_PM_CLK_PER 2U /* Peripheral clock */ -#define SC_PM_CLK_PHY 3U /* Phy clock */ -#define SC_PM_CLK_MISC 4U /* Misc clock */ -#define SC_PM_CLK_MISC0 0U /* Misc 0 clock */ -#define SC_PM_CLK_MISC1 1U /* Misc 1 clock */ -#define SC_PM_CLK_MISC2 2U /* Misc 2 clock */ -#define SC_PM_CLK_MISC3 3U /* Misc 3 clock */ -#define SC_PM_CLK_MISC4 4U /* Misc 4 clock */ -#define SC_PM_CLK_CPU 2U /* CPU clock */ -#define SC_PM_CLK_PLL 4U /* PLL */ -#define SC_PM_CLK_BYPASS 4U /* Bypass clock */ - -/* Defines for sc_pm_clk_mode_t */ -#define SC_PM_CLK_MODE_ROM_INIT 0U /* Clock is initialized by ROM. */ -#define SC_PM_CLK_MODE_OFF 1U /* Clock is disabled */ -#define SC_PM_CLK_MODE_ON 2U /* Clock is enabled. */ -#define SC_PM_CLK_MODE_AUTOGATE_SW 3U /* Clock is in SW autogate mode */ -#define SC_PM_CLK_MODE_AUTOGATE_HW 4U /* Clock is in HW autogate mode */ -#define SC_PM_CLK_MODE_AUTOGATE_SW_HW 5U /* Clock is in SW-HW autogate mode */ - -typedef u8 sc_pm_power_mode_t; -typedef u8 sc_pm_clk_t; -typedef u8 sc_pm_clk_mode_t; -typedef u8 sc_pm_clk_parent_t; -typedef u32 sc_pm_clock_rate_t; - -#endif /* SC_PM_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h deleted file mode 100644 index ed30388..0000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h +++ /dev/null @@ -1,69 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_RM_API_H -#define SC_RM_API_H - -#include <asm/arch/sci/types.h> - -/* Defines for type widths */ -#define SC_RM_PARTITION_W 5U /* Width of sc_rm_pt_t */ -#define SC_RM_MEMREG_W 6U /* Width of sc_rm_mr_t */ -#define SC_RM_DID_W 4U /* Width of sc_rm_did_t */ -#define SC_RM_SID_W 6U /* Width of sc_rm_sid_t */ -#define SC_RM_SPA_W 2U /* Width of sc_rm_spa_t */ -#define SC_RM_PERM_W 3U /* Width of sc_rm_perm_t */ - -/* Defines for ALL parameters */ -#define SC_RM_PT_ALL ((sc_rm_pt_t)UINT8_MAX) /* All partitions */ -#define SC_RM_MR_ALL ((sc_rm_mr_t)UINT8_MAX) /* All memory regions */ - -/* Defines for sc_rm_spa_t */ -#define SC_RM_SPA_PASSTHRU 0U /* Pass through (attribute driven by master) */ -#define SC_RM_SPA_PASSSID 1U /* Pass through and output on SID */ -#define SC_RM_SPA_ASSERT 2U /* Assert (force to be secure/privileged) */ -#define SC_RM_SPA_NEGATE 3U /* Negate (force to be non-secure/user) */ - -/* Defines for sc_rm_perm_t */ -#define SC_RM_PERM_NONE 0U /* No access */ -#define SC_RM_PERM_SEC_R 1U /* Secure RO */ -#define SC_RM_PERM_SECPRIV_RW 2U /* Secure privilege R/W */ -#define SC_RM_PERM_SEC_RW 3U /* Secure R/W */ -#define SC_RM_PERM_NSPRIV_R 4U /* Secure R/W, non-secure privilege RO */ -#define SC_RM_PERM_NS_R 5U /* Secure R/W, non-secure RO */ -#define SC_RM_PERM_NSPRIV_RW 6U /* Secure R/W, non-secure privilege R/W */ -#define SC_RM_PERM_FULL 7U /* Full access */ - -/* Types */ - -/*! - * This type is used to declare a resource partition. - */ -typedef u8 sc_rm_pt_t; - -/*! - * This type is used to declare a memory region. - */ -typedef u8 sc_rm_mr_t; - -/*! - * This type is used to declare a resource domain ID used by the - * isolation HW. - */ -typedef u8 sc_rm_did_t; - -/*! - * This type is used to declare an SMMU StreamID. - */ -typedef u16 sc_rm_sid_t; - -/*! - * This type is a used to declare master transaction attributes. - */ -typedef u8 sc_rm_spa_t; - -typedef u8 sc_rm_perm_t; - -#endif /* SC_RM_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h deleted file mode 100644 index 3ed0584..0000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2019 NXP - */ - -#ifndef SC_SECO_API_H -#define SC_SECO_API_H - -/* Includes */ - -#include <asm/arch/sci/types.h> - -/* Defines */ -#define SC_SECO_AUTH_CONTAINER 0U /* Authenticate container */ -#define SC_SECO_VERIFY_IMAGE 1U /* Verify image */ -#define SC_SECO_REL_CONTAINER 2U /* Release container */ -#define SC_SECO_AUTH_SECO_FW 3U /* SECO Firmware */ -#define SC_SECO_AUTH_HDMI_TX_FW 4U /* HDMI TX Firmware */ -#define SC_SECO_AUTH_HDMI_RX_FW 5U /* HDMI RX Firmware */ - -#define SC_SECO_RNG_STAT_UNAVAILABLE 0U /* Unable to initialize the RNG */ -#define SC_SECO_RNG_STAT_INPROGRESS 1U /* Initialization is on-going */ -#define SC_SECO_RNG_STAT_READY 2U /* Initialized */ - -/* Types */ - -/*! - * This type is used to issue SECO authenticate commands. - */ -typedef u8 sc_seco_auth_cmd_t; - -/*! - * This type is used to return the RNG initialization status. - */ -typedef u32 sc_seco_rng_stat_t; - -#endif /* SC_SECO_API_H */ |