diff options
Diffstat (limited to 'include/configs/devkit8000.h')
| -rw-r--r-- | include/configs/devkit8000.h | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h deleted file mode 100644 index baf1a73..0000000 --- a/include/configs/devkit8000.h +++ /dev/null @@ -1,181 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * - * (C) Copyright 2009 - * Frederik Kriewitz <frederik@kriewitz.eu> - * - * Configuration settings for the DevKit8000 board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ - -#define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ - -/* Physical Memory Map */ - -#include <configs/ti_omap3_common.h> - -#define CONFIG_REVISION_TAG 1 - -/* Size of malloc() pool */ -#undef CONFIG_SYS_MALLOC_LEN -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* Hardware drivers */ -/* DM9000 */ -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x2c000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) -#define CONFIG_DM9000_USE_16BIT 1 -#define CONFIG_DM9000_NO_SROM 1 -#undef CONFIG_DM9000_DEBUG - -/* TWL4030 */ - -/* Board NAND Info */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - -/* BOOTP/DHCP options */ -#define CONFIG_BOOTP_NISDOMAIN -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_TIMEOFFSET -#undef CONFIG_BOOTP_VENDOREX - -/* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "mmcdev=0\0" \ - "vram=12M\0" \ - "dvimode=1024x768MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \ - "kernelopts=rw\0" \ - "commonargs=" \ - "setenv bootargs console=${console} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay}\0" \ - "mmcargs=" \ - "run commonargs; " \ - "setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p2 " \ - "rootwait " \ - "${kernelopts}\0" \ - "nandargs=" \ - "run commonargs; " \ - "setenv bootargs ${bootargs} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=/dev/mtdblock4 " \ - "rootfstype=jffs2 " \ - "${kernelopts}\0" \ - "netargs=" \ - "run commonargs; " \ - "setenv bootargs ${bootargs} " \ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \ - "${kernelopts} " \ - "dnsip1=${dnsip} " \ - "dnsip2=${dnsip2}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 280000 400000; " \ - "bootm ${loadaddr}\0" \ - "netboot=echo Booting from network ...; " \ - "dhcp ${loadaddr}; " \ - "run netargs; " \ - "bootm ${loadaddr}\0" \ - "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi\0" - -#define CONFIG_BOOTCOMMAND "run autoboot" - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - 0x01000000) /* 16MB */ - -/* SRAM config */ -#define CONFIG_SYS_SRAM_START 0x40200000 -#define CONFIG_SYS_SRAM_SIZE 0x10000 - -/* Defines for SPL */ - -/* NAND boot config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW - -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 - -/* SPL OS boot options */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 - -#undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR -#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR -#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */ - -#undef CONFIG_SYS_SPL_ARGS_ADDR -#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) - -#endif /* __CONFIG_H */ |