From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001
From: Iru Cai <mytbk920423@gmail.com>
Date: Wed, 30 Oct 2019 15:42:15 +0800
Subject: rm include/configs

---
 include/configs/UCP1020.h | 883 ----------------------------------------------
 1 file changed, 883 deletions(-)
 delete mode 100644 include/configs/UCP1020.h

(limited to 'include/configs/UCP1020.h')

diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
deleted file mode 100644
index 6a01a90..0000000
--- a/include/configs/UCP1020.h
+++ /dev/null
@@ -1,883 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013-2019 Arcturus Networks, Inc.
- *           https://www.arcturusnetworks.com/products/ucp1020/
- * based on include/configs/p1_p2_rdb_pc.h
- * original copyright follows:
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- */
-
-/*
- * QorIQ uCP1020-xx boards configuration file
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*** Arcturus FirmWare Environment */
-
-#define MAX_SERIAL_SIZE 15
-#define MAX_HWADDR_SIZE 17
-
-#define MAX_FWENV_ADDR	4
-
-#define FWENV_MMC	1
-#define FWENV_SPI_FLASH	2
-#define FWENV_NOR_FLASH	3
-/*
- #define FWENV_TYPE    FWENV_MMC
- #define FWENV_TYPE    FWENV_SPI_FLASH
-*/
-#define FWENV_TYPE	FWENV_NOR_FLASH
-
-#if (FWENV_TYPE == FWENV_MMC)
-#ifndef CONFIG_SYS_MMC_ENV_DEV
-#define CONFIG_SYS_MMC_ENV_DEV 1
-#endif
-#define FWENV_ADDR1 -1
-#define FWENV_ADDR2 -1
-#define FWENV_ADDR3 -1
-#define FWENV_ADDR4 -1
-#define EMPY_CHAR 0
-#endif
-
-#if (FWENV_TYPE == FWENV_SPI_FLASH)
-#ifndef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED	1000000
-#endif
-#ifndef CONFIG_SF_DEFAULT_MODE
-#define CONFIG_SF_DEFAULT_MODE	SPI_MODE0
-#endif
-#ifndef CONFIG_SF_DEFAULT_CS
-#define CONFIG_SF_DEFAULT_CS	0
-#endif
-#ifndef CONFIG_SF_DEFAULT_BUS
-#define CONFIG_SF_DEFAULT_BUS	0
-#endif
-#define FWENV_ADDR1 (0x200 - sizeof(smac))
-#define FWENV_ADDR2 (0x400 - sizeof(smac))
-#define FWENV_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
-#define FWENV_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
-#define EMPY_CHAR 0xff
-#endif
-
-#if (FWENV_TYPE == FWENV_NOR_FLASH)
-#define FWENV_ADDR1 0xEC080000
-#define FWENV_ADDR2 -1
-#define FWENV_ADDR3 -1
-#define FWENV_ADDR4 -1
-#define EMPY_CHAR 0xff
-#endif
-/***********************************/
-
-#define CONFIG_PCIE1	/* PCIE controller 1 (slot 1) */
-#define CONFIG_PCIE2	/* PCIE controller 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
-
-#if defined(CONFIG_TARTGET_UCP1020T1)
-
-#define CONFIG_UCP1020_REV_1_3
-
-#define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC3
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETHADDR		00:19:D3:FF:FF:FF
-#define CONFIG_ETH1ADDR		00:19:D3:FF:FF:FE
-#define CONFIG_ETH2ADDR		00:19:D3:FF:FF:FD
-#define CONFIG_IPADDR		10.80.41.229
-#define CONFIG_SERVERIP		10.80.41.227
-#define CONFIG_NETMASK		255.255.252.0
-#define CONFIG_ETHPRIME		"eTSEC3"
-
-#define CONFIG_SYS_L2_SIZE	(256 << 10)
-
-#endif
-
-#if defined(CONFIG_TARGET_UCP1020)
-
-#define CONFIG_UCP1020
-#define CONFIG_UCP1020_REV_1_3
-
-#define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC3
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETHADDR		00:06:3B:FF:FF:FF
-#define CONFIG_ETH1ADDR		00:06:3B:FF:FF:FE
-#define CONFIG_ETH2ADDR		00:06:3B:FF:FF:FD
-#define CONFIG_IPADDR		192.168.1.81
-#define CONFIG_IPADDR1		192.168.1.82
-#define CONFIG_IPADDR2		192.168.1.83
-#define CONFIG_SERVERIP		192.168.1.80
-#define CONFIG_GATEWAYIP	102.168.1.1
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-#undef CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
-#define CONFIG_SYS_L2_SIZE	(256 << 10)
-
-#endif
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
-#endif
-
-#define CONFIG_SYS_TEXT_BASE_NOR	0xeff80000
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_LBA48
-
-#define CONFIG_SYS_CLK_FREQ	66666666
-#define CONFIG_DDR_CLK_FREQ	66666666
-
-#define CONFIG_HWCONFIG
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE
-#define CONFIG_BTB
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x1fffffff
-
-#define CONFIG_SYS_CCSRBAR		0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-
-/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
-       SPL code*/
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-/* DDR Setup */
-#define CONFIG_DDR_ECC_ENABLE
-#ifndef CONFIG_DDR_ECC_ENABLE
-#define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_DDR_SPD
-#endif
-#define CONFIG_SYS_SPD_BUS_NUM 1
-
-#define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_512M
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_SYS_SDRAM_SIZE		(1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-
-/* Default settings for DDR3 */
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_CS1_BNDS		0x0040007f
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x80014302
-#define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
-
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8655A608
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#ifdef CONFIG_DDR_ECC_ENABLE
-#define CONFIG_SYS_DDR_CONTROL		0xE70C0000	/* Type = DDR3 & ECC */
-#else
-#define CONFIG_SYS_DDR_CONTROL		0xC70C0000	/* Type = DDR3 */
-#endif
-#define CONFIG_SYS_DDR_CONTROL_2	0x04401050
-#define CONFIG_SYS_DDR_TIMING_4		0x00220001
-#define CONFIG_SYS_DDR_TIMING_5		0x03402400
-
-#define CONFIG_SYS_DDR_TIMING_3		0x00020000
-#define CONFIG_SYS_DDR_TIMING_0		0x00330004
-#define CONFIG_SYS_DDR_TIMING_1		0x6f6B4846
-#define CONFIG_SYS_DDR_TIMING_2		0x0FA8C8CF
-#define CONFIG_SYS_DDR_CLK_CTRL		0x03000000
-#define CONFIG_SYS_DDR_MODE_1		0x40461520
-#define CONFIG_SYS_DDR_MODE_2		0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL		0x0C300000
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-/*
- * Memory map
- *
- * 0x0000_0000 0x7fff_ffff	DDR		Up to 2GB cacheable
- * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1G non-cacheable(PCIe * 2)
- * 0xec00_0000 0xefff_ffff	NOR flash	Up to 64M non-cacheable	CS0/1
- * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 256K cacheable
- *   (early boot only)
- * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
- * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K cacheable
- * 0xffe0_0000 0xffef_ffff	CCSR		1M non-cacheable
- */
-
-/*
- * Local Bus Definitions
- */
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
-#define CONFIG_SYS_FLASH_BASE		0xec000000
-
-#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
-	| BR_PS_16 | BR_V)
-
-#define CONFIG_FLASH_OR_PRELIM		0xfc000ff7
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */
-/* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
-/* Size of used area in RAM */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)/* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)/* Reserved for malloc */
-
-#define CONFIG_SYS_PMC_BASE	0xff980000
-#define CONFIG_SYS_PMC_BASE_PHYS	CONFIG_SYS_PMC_BASE
-#define CONFIG_PMC_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
-					BR_PS_8 | BR_V)
-#define CONFIG_PMC_OR_PRELIM	(OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
-				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
-				 OR_GPCM_EAD)
-
-#define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
-#define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
-#ifdef CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_BR1_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
-#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR + 0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
-#define CONFIG_SYS_SPD_BUS_NUM		1 /* For rom_loc and flash bank */
-
-#define CONFIG_RTC_DS1337
-#define CONFIG_RTC_DS1337_NOOSC
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-#define CONFIG_SYS_I2C_PCA9557_ADDR	0x18
-#define CONFIG_SYS_I2C_NCT72_ADDR	0x4C
-#define CONFIG_SYS_I2C_IDT6V49205B	0x69
-
-#if defined(CONFIG_PCI)
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-/* controller 2, direct to uli, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_NAME		"PCIe SLOT CON9"
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-
-/* controller 1, Slot 2, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME		"PCIe SLOT CON10"
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-
-#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
-/*
- * Environment
- */
-#ifdef CONFIG_ENV_FIT_UCBOOT
-
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x20000)
-#define CONFIG_ENV_SIZE		0x20000
-#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
-
-#else
-
-
-#ifdef CONFIG_RAMBOOT_SPIFLASH
-
-#define CONFIG_ENV_SIZE		0x3000		/* 12KB */
-#define CONFIG_ENV_OFFSET	0x2000		/* 8KB */
-#define CONFIG_ENV_SECT_SIZE	0x1000
-
-#if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
-#endif
-
-#elif defined(CONFIG_RAMBOOT_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_SYS_MMC_ENV_DEV	0
-
-#elif defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE		0x2000
-
-#else
-#define CONFIG_ENV_BASE		(CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR		(CONFIG_ENV_BASE + 0xC0000)
-#if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-#endif
-
-#endif
-
-#endif	/* CONFIG_ENV_FIT_UCBOOT */
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
- * USB
- */
-#define CONFIG_HAS_FSL_DR_USB
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#endif
-#endif
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-/* Misc Extra Settings */
-#undef CONFIG_WATCHDOG	/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3)
-#else
-#error "UCP1020 module revision is not defined !!!"
-#endif
-
-#define CONFIG_BOOTP_SERVERIP
-
-#define CONFIG_TSEC1_NAME	"eTSEC1"
-#define CONFIG_TSEC2_NAME	"eTSEC2"
-#define CONFIG_TSEC3_NAME	"eTSEC3"
-
-#define TSEC1_PHY_ADDR	4
-#define TSEC2_PHY_ADDR	0
-#define TSEC2_PHY_ADDR_SGMII	0x00
-#define TSEC3_PHY_ADDR	6
-
-#define TSEC1_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX	0
-#define TSEC2_PHYIDX	0
-#define TSEC3_PHYIDX	0
-
-#endif
-
-#define CONFIG_HOSTNAME		"UCP1020"
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#if defined(CONFIG_DONGLE)
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run prog_spi_mbrbootcramfs\0"					\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"cramfsfile=image.cramfs\0"						\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashrecovery=tftp $recoveryaddr $cramfsfile; "			\
-	"protect off $nor_recoveryaddr +$filesize; "			\
-	"erase $nor_recoveryaddr +$filesize; "				\
-	"cp.b $recoveryaddr $nor_recoveryaddr $filesize; "		\
-	"protect on $nor_recoveryaddr +$filesize\0 "			\
-"flashuboot=tftp $ubootaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr +$filesize; "			\
-	"erase $nor_ubootaddr +$filesize; "				\
-	"cp.b $ubootaddr $nor_ubootaddr $filesize; "			\
-	"protect on $nor_ubootaddr +$filesize\0 "			\
-"flashworking=tftp $workingaddr $cramfsfile; "				\
-	"protect off $nor_workingaddr +$filesize; "			\
-	"erase $nor_workingaddr +$filesize; "				\
-	"cp.b $workingaddr $nor_workingaddr $filesize; "		\
-	"protect on $nor_workingaddr +$filesize\0 "			\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020d.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"mmbr=uCP1020Quiet.mbr\0"						\
-"mmcpart=0:2\0"								\
-"mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "			\
-	"mmc erase 1 1; "						\
-	"mmc write $loadaddr 1 1\0"					\
-"mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; "		\
-	"mmc erase 0x40 0x400; "					\
-	"mmc write $loadaddr 0x40 0x400\0"				\
-"netdev=eth0\0"								\
-"nor_recoveryaddr=0xEC0A0000\0"						\
-"nor_ubootaddr=0xEFF80000\0"						\
-"nor_workingaddr=0xECFA0000\0"						\
-"norbootrecovery=setenv bootargs $recoverybootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadrecovery; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norbootworking=setenv bootargs $workingbootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadworking; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_recoveryaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_workingaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"prog_spi_mbr=run spi__mbr\0"						\
-"prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0"	\
-"prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; "	\
-	"run spi__cramfs\0"						\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"recoveryaddr=0x02F00000\0"						\
-"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"		\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; "		\
-	"protect off 0xeC000000 +$filesize; "				\
-	"erase 0xEC000000 +$filesize; "					\
-	"cp.b $loadaddr 0xEC000000 $filesize; "				\
-	"cmp.b $loadaddr 0xEC000000 $filesize; "			\
-	"protect on 0xeC000000 +$filesize\0"				\
-"spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; "		\
-	"protect off 0xeFF80000 +$filesize; "				\
-	"erase 0xEFF80000 +$filesize; "					\
-	"cp.b $loadaddr 0xEFF80000 $filesize; "				\
-	"cmp.b $loadaddr 0xEFF80000 $filesize; "			\
-	"protect on 0xeFF80000 +$filesize\0"				\
-"spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; "			\
-	"sf probe 0; sf erase 0x8000 +$filesize; "			\
-	"sf write $loadaddr 0x8000 $filesize\0"				\
-"spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; "		\
-	"protect off 0xec0a0000 +$filesize; "				\
-	"erase 0xeC0A0000 +$filesize; "					\
-	"cp.b $loadaddr 0xeC0A0000 $filesize; "				\
-	"protect on 0xec0a0000 +$filesize\0"				\
-"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "			\
-	"sf probe 1; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "			\
-	"sf probe 0; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootaddr=0x01000000\0"						\
-"ubootfile=u-boot.bin\0"						\
-"ubootd=u-boot4dongle.bin\0"						\
-"upgrade=run flashworking\0"						\
-"usb_phy_type=ulpi\0 "							\
-"workingaddr=0x02F00000\0"						\
-"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
-
-#else
-
-#if defined(CONFIG_UCP1020T1)
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0"	\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"cramfsfile=image.cramfs\0"						\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashrecovery=tftp $recoveryaddr $cramfsfile; "			\
-	"protect off $nor_recoveryaddr +$filesize; "			\
-	"erase $nor_recoveryaddr +$filesize; "				\
-	"cp.b $recoveryaddr $nor_recoveryaddr $filesize; "		\
-	"protect on $nor_recoveryaddr +$filesize\0 "			\
-"flashuboot=tftp $ubootaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr +$filesize; "			\
-	"erase $nor_ubootaddr +$filesize; "				\
-	"cp.b $ubootaddr $nor_ubootaddr $filesize; "			\
-	"protect on $nor_ubootaddr +$filesize\0 "			\
-"flashworking=tftp $workingaddr $cramfsfile; "				\
-	"protect off $nor_workingaddr +$filesize; "			\
-	"erase $nor_workingaddr +$filesize; "				\
-	"cp.b $workingaddr $nor_workingaddr $filesize; "		\
-	"protect on $nor_workingaddr +$filesize\0 "			\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"netdev=eth0\0"								\
-"nor_recoveryaddr=0xEC0A0000\0"						\
-"nor_ubootaddr=0xEFF80000\0"						\
-"nor_workingaddr=0xECFA0000\0"						\
-"norbootrecovery=setenv bootargs $recoverybootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadrecovery; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norbootworking=setenv bootargs $workingbootargs"			\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"run norloadworking; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_recoveryaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $nor_workingaddr; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"othbootargs=quiet\0"							\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	" console=$consoledev,$baudrate $othbootargs; "			\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"recoveryaddr=0x02F00000\0"						\
-"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"		\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"silent=1\0"								\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootaddr=0x01000000\0"						\
-"ubootfile=u-boot.bin\0"						\
-"upgrade=run flashworking\0"						\
-"workingaddr=0x02F00000\0"						\
-"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
-
-#else /* For Arcturus Modules */
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-"bootcmd=run norkernel\0"						\
-"bootfile=uImage\0"							\
-"consoledev=ttyS0\0"							\
-"dtbaddr=0x00c00000\0"							\
-"dtbfile=image.dtb\0"							\
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"				\
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"				\
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"				\
-"fileaddr=0x01000000\0"							\
-"filesize=0x00080000\0"							\
-"flashmbr=sf probe 0; "							\
-	"tftp $loadaddr $mbr; "						\
-	"sf erase $mbr_offset +$filesize; "				\
-	"sf write $loadaddr $mbr_offset $filesize\0"			\
-"flashuboot=tftp $loadaddr $ubootfile; "				\
-	"protect off $nor_ubootaddr0 +$filesize; "			\
-	"erase $nor_ubootaddr0 +$filesize; "				\
-	"cp.b $loadaddr $nor_ubootaddr0 $filesize; "			\
-	"protect on $nor_ubootaddr0 +$filesize; "			\
-	"protect off $nor_ubootaddr1 +$filesize; "			\
-	"erase $nor_ubootaddr1 +$filesize; "				\
-	"cp.b $loadaddr $nor_ubootaddr1 $filesize; "			\
-	"protect on $nor_ubootaddr1 +$filesize\0 "			\
-"format0=protect off $part0base +$part0size; "				\
-	"erase $part0base +$part0size\0"				\
-"format1=protect off $part1base +$part1size; "				\
-	"erase $part1base +$part1size\0"				\
-"format2=protect off $part2base +$part2size; "				\
-	"erase $part2base +$part2size\0"				\
-"format3=protect off $part3base +$part3size; "				\
-	"erase $part3base +$part3size\0"				\
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "				\
-"kerneladdr=0x01100000\0"						\
-"kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"			\
-"kernelfile=uImage\0"							\
-"loadaddr=0x01000000\0"							\
-"mbr=uCP1020.mbr\0"							\
-"mbr_offset=0x00000000\0"						\
-"netdev=eth0\0"								\
-"nor_ubootaddr0=0xEC000000\0"						\
-"nor_ubootaddr1=0xEFF80000\0"						\
-"norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; "	\
-	"run norkernelload; "						\
-	"bootm $kerneladdr - $dtbaddr\0"				\
-"norkernelload=mw.l $kerneladdr 0x0 0x00a00000; "			\
-	"setenv cramfsaddr $part0base; "				\
-	"cramfsload $dtbaddr $dtbfile; "				\
-	"cramfsload $kerneladdr $kernelfile\0"				\
-"part0base=0xEC100000\0"						\
-"part0size=0x00700000\0"						\
-"part1base=0xEC800000\0"						\
-"part1size=0x02000000\0"						\
-"part2base=0xEE800000\0"						\
-"part2size=0x00800000\0"						\
-"part3base=0xEF000000\0"						\
-"part3size=0x00F80000\0"						\
-"partENVbase=0xEC080000\0"						\
-"partENVsize=0x00080000\0"						\
-"program0=tftp part0-000000.bin; "					\
-	"protect off $part0base +$filesize; "				\
-	"erase $part0base +$filesize; "					\
-	"cp.b $loadaddr $part0base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part0base $filesize\0"			\
-"program1=tftp part1-000000.bin; "					\
-	"protect off $part1base +$filesize; "				\
-	"erase $part1base +$filesize; "					\
-	"cp.b $loadaddr $part1base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part1base $filesize\0"			\
-"program2=tftp part2-000000.bin; "					\
-	"protect off $part2base +$filesize; "				\
-	"erase $part2base +$filesize; "					\
-	"cp.b $loadaddr $part2base $filesize; "				\
-	"echo Verifying...; "						\
-	"cmp.b $loadaddr $part2base $filesize\0"			\
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"	\
-	"  console=$consoledev,$baudrate $othbootargs; "		\
-	"tftp $rootfsaddr $rootfsfile; "				\
-	"tftp $loadaddr $kernelfile; "					\
-	"tftp $dtbaddr $dtbfile; "					\
-	"bootm $loadaddr $rootfsaddr $dtbaddr\0"			\
-"ramdisk_size=120000\0"							\
-"ramdiskfile=rootfs.ext2.gz.uboot\0"					\
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "	\
-	"mw.l 0xffe0f008 0x00400000\0"					\
-"rootfsaddr=0x02F00000\0"						\
-"rootfsfile=rootfs.ext2.gz.uboot\0"					\
-"rootpath=/opt/nfsroot\0"						\
-"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "			\
-	"sf probe 0; sf erase 0 +$filesize; "				\
-	"sf write $loadaddr 0 $filesize\0"				\
-"spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; "			\
-	"protect off 0xeC000000 +$filesize; "				\
-	"erase 0xEC000000 +$filesize; "					\
-	"cp.b $loadaddr 0xEC000000 $filesize; "				\
-	"cmp.b $loadaddr 0xEC000000 $filesize; "			\
-	"protect on 0xeC000000 +$filesize\0"				\
-"tftpflash=tftpboot $loadaddr $uboot; "					\
-	"protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "	\
-	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
-	"protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
-	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0"				\
-"ubootfile=u-boot.bin\0"						\
-"upgrade=run flashuboot\0"						\
-"usb_phy_type=ulpi\0 "							\
-"boot_nfs= "								\
-	"setenv bootargs root=/dev/nfs rw "				\
-	"nfsroot=$serverip:$rootpath "					\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr\0"					\
-"boot_hd = "								\
-	"setenv bootargs root=/dev/$bdev rw rootdelay=30 "		\
-	"console=$consoledev,$baudrate $othbootargs;"			\
-	"usb start;"							\
-	"ext2load usb 0:1 $loadaddr /boot/$bootfile;"			\
-	"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"			\
-	"bootm $loadaddr - $fdtaddr\0"					\
-"boot_usb_fat = "							\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"usb start;"							\
-	"fatload usb 0:2 $loadaddr $bootfile;"				\
-	"fatload usb 0:2 $fdtaddr $fdtfile;"				\
-	"fatload usb 0:2 $ramdiskaddr $ramdiskfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0 "			\
-"boot_usb_ext2 = "							\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"usb start;"							\
-	"ext2load usb 0:4 $loadaddr $bootfile;"				\
-	"ext2load usb 0:4 $fdtaddr $fdtfile;"				\
-	"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0 "			\
-"boot_nor = "								\
-	"setenv bootargs root=/dev/$jffs2nor rw "			\
-	"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"	\
-	"bootm $norbootaddr - $norfdtaddr\0 "				\
-"boot_ram = "								\
-	"setenv bootargs root=/dev/ram rw "				\
-	"console=$consoledev,$baudrate $othbootargs "			\
-	"ramdisk_size=$ramdisk_size;"					\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr\0"
-
-#endif
-#endif
-
-#endif /* __CONFIG_H */
-- 
cgit v1.2.3