From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Wed, 30 Oct 2019 15:42:15 +0800 Subject: rm include/configs --- include/configs/am65x_evm.h | 132 -------------------------------------------- 1 file changed, 132 deletions(-) delete mode 100644 include/configs/am65x_evm.h (limited to 'include/configs/am65x_evm.h') diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h deleted file mode 100644 index 1149d55..0000000 --- a/include/configs/am65x_evm.h +++ /dev/null @@ -1,132 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration header file for K3 AM654 EVM - * - * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ - * Lokesh Vutla - */ - -#ifndef __CONFIG_AM654_EVM_H -#define __CONFIG_AM654_EVM_H - -#include -#include -#include -#include - -#define CONFIG_ENV_SIZE (128 << 10) - -/* DDR Configuration */ -#define CONFIG_SYS_SDRAM_BASE1 0x880000000 - -/* SPL Loader Configuration */ -#ifdef CONFIG_TARGET_AM654_A53_EVM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \ - CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE) -#else -/* - * Maximum size in memory allocated to the SPL BSS. Keep it as tight as - * possible (to allow the build to go through), as this directly affects - * our memory footprint. The less we use for BSS the more we have available - * for everything else. - */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x5000 -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\ - CONFIG_SPL_BSS_MAX_SIZE) -/* Set the stack right below the SPL BSS section */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR -/* Configure R5 SPL post-relocation malloc pool in DDR */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M -#endif - -#ifdef CONFIG_SYS_K3_SPL_ATF -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" -#endif - -#ifndef CONFIG_CPU_V7R -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE - -#define CONFIG_SYS_BOOTM_LEN SZ_64M - -#define PARTS_DEFAULT \ - /* Linux partitions */ \ - "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" - -/* U-Boot general configuration */ -#define EXTRA_ENV_AM65X_BOARD_SETTINGS \ - "findfdt=" \ - "setenv name_fdt k3-am654-base-board.dtb;" \ - "setenv fdtfile ${name_fdt}\0" \ - "loadaddr=0x80080000\0" \ - "fdtaddr=0x82000000\0" \ - "overlayaddr=0x83000000\0" \ - "name_kern=Image\0" \ - "console=ttyS2,115200n8\0" \ - "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \ - "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" \ - -/* U-Boot MMC-specific configuration */ -#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \ - "boot=mmc\0" \ - "mmcdev=1\0" \ - "bootpart=1:2\0" \ - "bootdir=/boot\0" \ - "rd_spec=-\0" \ - "init_mmc=run args_all args_mmc\0" \ - "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \ - "get_overlay_mmc=" \ - "fdt address ${fdtaddr};" \ - "fdt resize 0x100000;" \ - "for overlay in $name_overlays;" \ - "do;" \ - "load mmc ${bootpart} ${overlayaddr} ${bootdir}/${overlay};" \ - "fdt apply ${overlayaddr};" \ - "done;\0" \ - "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \ - "${bootdir}/${name_kern}\0" \ - "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \ - "${bootdir}/${name_fit}\0" \ - "partitions=" PARTS_DEFAULT - -#ifdef DEFAULT_RPROCS -#undef DEFAULT_RPROCS -#endif -#define DEFAULT_RPROCS "" \ - "0 /lib/firmware/am65x-mcu-r5f0_0-fw " \ - "1 /lib/firmware/am65x-mcu-r5f0_1-fw " - -/* Incorporate settings into the U-Boot environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_MMC_TI_ARGS \ - DEFAULT_FIT_TI_ARGS \ - EXTRA_ENV_AM65X_BOARD_SETTINGS \ - EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \ - EXTRA_ENV_RPROC_SETTINGS - -/* MMC ENV related defines */ -#ifdef CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_SYS_MMC_ENV_PART 1 -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_ENV_OFFSET 0x680000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#endif - -#define CONFIG_SUPPORT_EMMC_BOOT - -/* Now for the remaining common defines */ -#include - -#endif /* __CONFIG_AM654_EVM_H */ -- cgit v1.2.3