From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Wed, 30 Oct 2019 15:42:15 +0800 Subject: rm include/configs --- include/configs/cm_t43.h | 126 ----------------------------------------------- 1 file changed, 126 deletions(-) delete mode 100644 include/configs/cm_t43.h (limited to 'include/configs/cm_t43.h') diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h deleted file mode 100644 index 1314cf9..0000000 --- a/include/configs/cm_t43.h +++ /dev/null @@ -1,126 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * cm_t43.h - * - * Copyright (C) 2015 Compulab, Ltd. - */ - -#ifndef __CONFIG_CM_T43_H -#define __CONFIG_CM_T43_H - -#define CONFIG_CM_T43 -#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ - -#include - -/* Serial support */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_CLK 48000000 -#define CONFIG_SYS_NS16550_COM1 0x44e09000 -#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL) -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#endif - -/* NAND support */ -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -/* CPSW Ethernet support */ -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_PHY_ATHEROS -#define CONFIG_SYS_RX_ETH_BUFFER 64 - -/* USB support */ -#define CONFIG_USB_XHCI_OMAP -#define CONFIG_AM437X_USB2PHY2_HOST - -/* Power */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_TPS65218 - -/* Enabling L2 Cache */ -#define CONFIG_SYS_L2_PL310 -#define CONFIG_SYS_PL310_BASE 0x48242000 - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ -#if !defined(CONFIG_SPL_BUILD) -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_HSMMC2_8BIT - -#include -#undef CONFIG_SYS_MONITOR_LEN - -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x81200000\0" \ - "bootm_size=0x8000000\0" \ - "autoload=no\0" \ - "console=ttyO0,115200n8\0" \ - "fdtfile=am437x-sb-som-t43.dtb\0" \ - "kernel=zImage-cm-t43\0" \ - "bootscr=bootscr.img\0" \ - "emmcroot=/dev/mmcblk0p2 rw\0" \ - "emmcrootfstype=ext4 rootwait\0" \ - "emmcargs=setenv bootargs console=${console} " \ - "root=${emmcroot} " \ - "rootfstype=${emmcrootfstype}\0" \ - "loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "emmcboot=echo Booting from emmc ... && " \ - "run emmcargs && " \ - "load mmc 1 ${loadaddr} ${kernel} && " \ - "load mmc 1 ${fdtaddr} ${fdtfile} && " \ - "bootz ${loadaddr} - ${fdtaddr}\0" - -#define CONFIG_BOOTCOMMAND \ - "mmc dev 0; " \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "fi; " \ - "fi; " \ - "mmc dev 1; " \ - "if mmc rescan; then " \ - "run emmcboot; " \ - "fi;" - -/* SPL defines. */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -/* EEPROM */ -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_SYS_EEPROM_SIZE 256 - -#endif /* __CONFIG_CM_T43_H */ -- cgit v1.2.3