From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001
From: Iru Cai <mytbk920423@gmail.com>
Date: Wed, 30 Oct 2019 15:42:15 +0800
Subject: rm include/configs

---
 include/configs/cm_t54.h | 126 -----------------------------------------------
 1 file changed, 126 deletions(-)
 delete mode 100644 include/configs/cm_t54.h

(limited to 'include/configs/cm_t54.h')

diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
deleted file mode 100644
index 2387f86..0000000
--- a/include/configs/cm_t54.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Config file for Compulab CM-T54 board
- *
- * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
- *
- * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
- */
-
-#ifndef __CONFIG_CM_T54_H
-#define __CONFIG_CM_T54_H
-
-#define CONFIG_CM_T54
-#define CONFIG_DRAM_2G
-
-#define PARTS_DEFAULT
-
-#include <configs/ti_omap5_common.h>
-
-/* EEPROM related defines */
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_I2C_EEPROM_BUS	0
-
-/* Enable SD/MMC CD and WP GPIOs */
-#define OMAP_HSMMC_USE_GPIO
-
-/* UART setup */
-#define CONFIG_SYS_NS16550_COM4		UART4_BASE
-
-/* MMC ENV related defines */
-#undef CONFIG_ENV_OFFSET
-#undef CONFIG_ENV_SIZE
-
-#define CONFIG_SYS_MMC_ENV_DEV		1		/* SLOT2: eMMC(1) */
-#define CONFIG_SYS_MMC_ENV_PART		0
-#define CONFIG_ENV_OFFSET		0xc0000		/* (in bytes) 768 KB */
-#define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KB */
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
-/* Enhance our eMMC support / experience. */
-#define CONFIG_HSMMC2_8BIT
-
-/* SATA Boot related defines */
-#define CONFIG_SPL_SATA_BOOT_DEVICE		0
-#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
-
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
-/* USB UHH support options */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO	76 /* HSIC2 HUB #RESET */
-#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO	83 /* HSIC3 ETH #RESET */
-
-/* Enabled commands */
-
-/* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-#define CONFIG_SYS_EEPROM_SIZE			256
-
-/* USB Networking options */
-
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_AUTOLOAD
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#undef CONFIG_BOOTCOMMAND
-
-#define CONFIG_SYS_AUTOLOAD		"no"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV \
-	"baudrate=115200\0" \
-	"bootdelay=3\0" \
-	"autoload=no\0" \
-	"bootscr=bootscr.img\0" \
-	"fdtfile=omap5-sbc-t54.dtb\0" \
-	"kernel=zImage-cm-t54\0" \
-	"ramdisk=ramdisk-cm-t54.img\0" \
-	"console=ttyO3\0" \
-	"ramdisksize=16384\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk1p2\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"root=${mmcroot} rw rootwait\0" \
-	"ramroot=/dev/ram0\0" \
-	"ramargs=setenv bootargs console=${console} " \
-		"root=${ramroot} ramdisk_size=${ramdisksize} rw\0" \
-	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
-	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
-	"mmcloadramdisk=load mmc ${mmcdev} ${rdaddr} ${ramdisk}\0" \
-	"mmcloadbootscript=load mmc ${mmcdev} ${loadaddr} ${bootsrc}\0" \
-	"mmcbootscript=echo Running bootscript from mmc${mmcdev}...; " \
-			"source ${loadaddr}\0" \
-	"mmcbootlinux=echo Booting from mmc${mmcdev} ...; " \
-			"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-	"mmcboot=if mmc dev ${mmcdev} && mmc rescan; then " \
-			"if run mmcloadbootscript; " \
-				"then run mmcbootscript; " \
-			"fi; " \
-			"if run mmcloadkernel; then " \
-				"if run mmcloadfdt; then " \
-					"if run mmcloadramdisk; then " \
-						"run ramargs; " \
-						"run mmcbootlinux; " \
-					"fi; " \
-					"run mmcargs; " \
-					"setenv rdaddr - ; " \
-					"run mmcbootlinux; " \
-				"fi; " \
-			"fi; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"bootcmd=run mmcboot || setenv mmcdev 1; setenv mmcroot /dev/mmcblk0p2; run mmcboot;"
-
-#endif /* __CONFIG_CM_T54_H */
-- 
cgit v1.2.3