From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Wed, 30 Oct 2019 15:42:15 +0800 Subject: rm include/configs --- include/configs/ds414.h | 102 ------------------------------------------------ 1 file changed, 102 deletions(-) delete mode 100644 include/configs/ds414.h (limited to 'include/configs/ds414.h') diff --git a/include/configs/ds414.h b/include/configs/ds414.h deleted file mode 100644 index 552c744..0000000 --- a/include/configs/ds414.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014 Stefan Roese - */ - -#ifndef _CONFIG_SYNOLOGY_DS414_H -#define _CONFIG_SYNOLOGY_DS414_H - -/* - * High Level Configuration Options (easy to change) - */ - -/* - * TEXT_BASE needs to be below 16MiB, since this area is scrubbed - * for DDR ECC byte filling in the SPL before loading the main - * U-Boot into it. - */ -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ - -/* - * Commands configuration - */ - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MVTWSI -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE -#define CONFIG_SYS_I2C_SLAVE 0x0 -#define CONFIG_SYS_I2C_SPEED 100000 - -/* Environment in SPI NOR flash */ -#define CONFIG_ENV_OFFSET 0x7E0000 /* RedBoot config partition in DTS */ -#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ -#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ - -#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII - -/* PCIe support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PCI_SCAN_SHOW -#endif - -/* USB/EHCI/XHCI configuration */ - -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* FIXME: broken XHCI support - * Below defines should enable support for the two rear USB3 ports. Sadly, this - * does not work because: - * - xhci-pci seems to not support DM_USB, so with that enabled it is not - * found. - * - USB init fails, controller does not respond in time */ - -#if !defined(CONFIG_USB_XHCI_HCD) -#define CONFIG_EHCI_IS_TDI -#endif - -/* why is this only defined in mv-common.h if CONFIG_DM is undefined? */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* - * Memory layout while starting into the bin_hdr via the - * BootROM: - * - * 0x4000.4000 - 0x4003.4000 headers space (192KiB) - * 0x4000.4030 bin_hdr start address - * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) - * 0x4007.fffc BootROM stack top - * - * The address space between 0x4007.fffc and 0x400f.fff is not locked in - * L2 cache thus cannot be used. - */ - -/* SPL */ -/* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -/* SPL related SPI defines */ - -/* DS414 bus width is 32bits */ -#define CONFIG_DDR_32BIT - -/* Default Environment */ -#define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm" -#define CONFIG_LOADADDR 0x80000 - -#endif /* _CONFIG_SYNOLOGY_DS414_H */ -- cgit v1.2.3