From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001
From: Iru Cai <mytbk920423@gmail.com>
Date: Wed, 30 Oct 2019 15:42:15 +0800
Subject: rm include/configs

---
 include/configs/j721e_evm.h | 116 --------------------------------------------
 1 file changed, 116 deletions(-)
 delete mode 100644 include/configs/j721e_evm.h

(limited to 'include/configs/j721e_evm.h')

diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
deleted file mode 100644
index 639d87a..0000000
--- a/include/configs/j721e_evm.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration header file for K3 J721E EVM
- *
- * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
- *	Lokesh Vutla <lokeshvutla@ti.com>
- */
-
-#ifndef __CONFIG_J721E_EVM_H
-#define __CONFIG_J721E_EVM_H
-
-#include <linux/sizes.h>
-#include <config_distro_bootcmd.h>
-#include <environment/ti/mmc.h>
-#include <environment/ti/k3_rproc.h>
-#include <environment/ti/ufs.h>
-
-#define CONFIG_ENV_SIZE			(128 << 10)
-
-/* DDR Configuration */
-#define CONFIG_SYS_SDRAM_BASE1		0x880000000
-
-/* SPL Loader Configuration */
-#ifdef CONFIG_TARGET_J721E_A72_EVM
-#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SPL_TEXT_BASE +	\
-					 CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
-#else
-/*
- * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
- * possible (to allow the build to go through), as this directly affects
- * our memory footprint. The less we use for BSS the more we have available
- * for everything else.
- */
-#define CONFIG_SPL_BSS_MAX_SIZE		0xA000
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
-/* Set the stack right below the SPL BSS section */
-#define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SPL_BSS_START_ADDR
-/* Configure R5 SPL post-relocation malloc pool in DDR */
-#define CONFIG_SYS_SPL_MALLOC_START	0x84000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_16M
-#endif
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"tispl.bin"
-#endif
-
-#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
-
-#define CONFIG_SYS_BOOTM_LEN		SZ_64M
-#define CONFIG_CQSPI_REF_CLK		133333333
-
-/* HyperFlash related configuration */
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
-
-/* U-Boot general configuration */
-#define EXTRA_ENV_J721E_BOARD_SETTINGS					\
-	"default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"	\
-	"findfdt=setenv fdtfile ${default_device_tree}\0"		\
-	"loadaddr=0x80080000\0"						\
-	"fdtaddr=0x82000000\0"						\
-	"overlayaddr=0x83000000\0"					\
-	"name_kern=Image\0"						\
-	"console=ttyS2,115200n8\0"					\
-	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
-	"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
-
-/* U-Boot MMC-specific configuration */
-#define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC				\
-	"boot=mmc\0"							\
-	"mmcdev=1\0"							\
-	"bootpart=1:2\0"						\
-	"bootdir=/boot\0"						\
-	"rd_spec=-\0"							\
-	"init_mmc=run args_all args_mmc\0"				\
-	"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"get_overlay_mmc="						\
-		"fdt address ${fdtaddr};"				\
-		"fdt resize 0x100000;"					\
-		"for overlay in $name_overlays;"			\
-		"do;"							\
-		"load mmc ${bootpart} ${overlayaddr} ${bootdir}/${overlay} && "	\
-		"fdt apply ${overlayaddr};"				\
-		"done;\0"						\
-	"get_kern_mmc=load mmc ${bootpart} ${loadaddr} "		\
-		"${bootdir}/${name_kern}\0"
-
-#ifdef DEFAULT_RPROCS
-#undef DEFAULT_RPROCS
-#endif
-#define DEFAULT_RPROCS	""						\
-		"3 /lib/firmware/j7-main-r5f0_1-fw "			\
-		"4 /lib/firmware/j7-main-r5f1_0-fw "			\
-		"6 /lib/firmware/j7-c66_0-fw "				\
-		"7 /lib/firmware/j7-c66_1-fw "				\
-		"8 /lib/firmware/j7-c71_0-fw "
-
-/* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	DEFAULT_MMC_TI_ARGS						\
-	EXTRA_ENV_J721E_BOARD_SETTINGS					\
-	EXTRA_ENV_J721E_BOARD_SETTINGS_MMC				\
-	EXTRA_ENV_RPROC_SETTINGS					\
-	DEFAULT_UFS_TI_ARGS
-
-/* Now for the remaining common defines */
-#include <configs/ti_armv7_common.h>
-
-#endif /* __CONFIG_J721E_EVM_H */
-- 
cgit v1.2.3