From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Wed, 30 Oct 2019 15:42:15 +0800 Subject: rm include/configs --- include/configs/ls1088a_common.h | 254 --------------------------------------- 1 file changed, 254 deletions(-) delete mode 100644 include/configs/ls1088a_common.h (limited to 'include/configs/ls1088a_common.h') diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h deleted file mode 100644 index 6f04dba..0000000 --- a/include/configs/ls1088a_common.h +++ /dev/null @@ -1,254 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2017-2018 NXP - */ - -#ifndef __LS1088_COMMON_H -#define __LS1088_COMMON_H - -/* SPL build */ -#ifdef CONFIG_SPL_BUILD -#define SPL_NO_BOARDINFO -#define SPL_NO_QIXIS -#define SPL_NO_PCI -#define SPL_NO_ENV -#define SPL_NO_RTC -#define SPL_NO_USB -#define SPL_NO_SATA -#define SPL_NO_QSPI -#define SPL_NO_IFC -#undef CONFIG_DISPLAY_CPUINFO -#endif - -#define CONFIG_REMAKE_ELF - -#include -#include -#include - -#define LS1088ARDB_PB_BOARD 0x4A -/* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif - -/* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 -#else -#ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 -#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FSL_QSPI_BASE + \ - CONFIG_ENV_OFFSET) -#endif -#endif - -#define CONFIG_SKIP_LOWLEVEL_INIT - -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 -/* - * SMP Definitinos - */ -#define CPU_RELEASE_ADDR secondary_boot_func - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) - -/* I2C */ -#ifndef CONFIG_DM_I2C -#define CONFIG_SYS_I2C -#endif - - -/* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) -/* IFC */ -#define CONFIG_FSL_IFC -#endif - -/* - * During booting, IFC is mapped at the region of 0x30000000. - * But this region is limited to 256MB. To accommodate NOR, promjet - * and FPGA. This region is divided as below: - * 0x30000000 - 0x37ffffff : 128MB : NOR flash - * 0x38000000 - 0x3BFFFFFF : 64MB : Promjet - * 0x3C000000 - 0x40000000 : 64MB : FPGA etc - * - * To accommodate bigger NOR flash and other devices, we will map IFC - * chip selects to as below: - * 0x5_1000_0000..0x5_1fff_ffff Memory Hole - * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB) - * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB - * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) - * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) - * - * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. - * CONFIG_SYS_FLASH_BASE has the final address (core view) - * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) - * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address - * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting - */ - -#define CONFIG_SYS_FLASH_BASE 0x580000000ULL -#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 -#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 - -#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 - -#ifndef __ASSEMBLY__ -unsigned long long get_qixis_addr(void); -#endif - -#define QIXIS_BASE get_qixis_addr() -#define QIXIS_BASE_PHYS 0x20000000 -#define QIXIS_BASE_PHYS_EARLY 0xC000000 - - -#define CONFIG_SYS_NAND_BASE 0x530000000ULL -#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000 - - -/* MC firmware */ -/* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 -#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 -#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 -#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 - -/* Define phy_reset function to boot the MC based on mcinitcmd. - * This happens late enough to properly fixup u-boot env MAC addresses. - */ -#define CONFIG_RESET_PHY_R - -/* - * Carve out a DDR region which will not be used by u-boot/Linux - * - * It will be used by MC and Debug Server. The MC region must be - * 512MB aligned, so the min size to hide is 512MB. - */ - -#if defined(CONFIG_FSL_MC_ENET) -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) -#endif -/* Command line configuration */ -#define CONFIG_CMD_CACHE - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) - -/* SATA */ -#ifdef CONFIG_SCSI -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 - -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -#endif - -/* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 - -#define CONFIG_HWCONFIG -#define HWCONFIG_BUFFER_SIZE 128 - -/* #define CONFIG_DISPLAY_CPUINFO */ - -#ifndef SPL_NO_ENV -/* Allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "loadaddr=0x80100000\0" \ - "kernel_addr=0x100000\0" \ - "ramdisk_addr=0x800000\0" \ - "ramdisk_size=0x2000000\0" \ - "fdt_high=0xa0000000\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581000000\0" \ - "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" \ - "console=ttyAMA0,38400n8\0" \ - "mcinitcmd=fsl_mc start mc 0x580a00000" \ - " 0x580e00000 \0" - -#ifndef CONFIG_TFABOOT -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \ - "sf read 0x80001000 0xd00000 0x100000;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " sf read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " mmc read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#else /* NOR BOOT*/ -#define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \ - " cp.b $kernel_start $kernel_load" \ - " $kernel_size && bootm $kernel_load" -#endif -#endif /* CONFIG_TFABOOT */ -#endif - -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - -#ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" -#define CONFIG_SPL_MAX_SIZE 0x16000 -#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 - -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) -#else -#define CONFIG_SYS_MONITOR_LEN 0x100000 -#endif /* ifdef CONFIG_SECURE_BOOT */ - -#endif -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#endif /* __LS1088_COMMON_H */ -- cgit v1.2.3