From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001
From: Iru Cai <mytbk920423@gmail.com>
Date: Wed, 30 Oct 2019 15:42:15 +0800
Subject: rm include/configs

---
 include/configs/lsxl.h | 139 -------------------------------------------------
 1 file changed, 139 deletions(-)
 delete mode 100644 include/configs/lsxl.h

(limited to 'include/configs/lsxl.h')

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
deleted file mode 100644
index 3ba5548..0000000
--- a/include/configs/lsxl.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2012 Michael Walle
- * Michael Walle <michael@walle.cc>
- */
-
-#ifndef _CONFIG_LSXL_H
-#define _CONFIG_LSXL_H
-
-/*
- * Version number information
- */
-#if defined(CONFIG_LSCHLV2)
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
-#define CONFIG_MACH_TYPE 3006
-#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
-#elif defined(CONFIG_LSXHL)
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
-#define CONFIG_MACH_TYPE 2663
-/* CONFIG_SYS_TCLK is 200000000 by default */
-#else
-#error "unknown board"
-#endif
-
-/*
- * General configuration options
- */
-#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
-#define CONFIG_KW88F6281		/* SOC Name */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-
-#define CONFIG_KIRKWOOD_GPIO
-
-/*
- * Commands configuration
- */
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-
-/* loading initramfs images without uimage header */
-
-/*
- *  Environment variables configurations
- */
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	8
-#define CONFIG_ENV_SECT_SIZE		0x10000 /* 64K */
-#endif
-
-#define CONFIG_ENV_SIZE			0x10000 /* 64k */
-#define CONFIG_ENV_OFFSET		0x70000 /* env starts here */
-
-/*
- * Default environment variables
- */
-#define CONFIG_LOADADDR		0x00800000
-
-#if defined(CONFIG_LSXHL)
-#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
-#elif defined(CONFIG_LSCHLV2)
-#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
-#else
-#error "Unsupported board"
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"bootsource=legacy\0"						\
-	"hdpart=0:1\0"							\
-	"kernel_addr=0x00800000\0"					\
-	"ramdisk_addr=0x01000000\0"					\
-	"fdt_addr=0x00ff0000\0"						\
-	"bootcmd_legacy=sata init "					\
-		"&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
-		"&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
-		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"bootcmd_net=bootp ${kernel_addr} vmlinuz "			\
-		"&& tftpboot ${ramdisk_addr} initrd.img "		\
-		"&& setenv ramdisk_len ${filesize} "			\
-		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
-		"&& bootz ${kernel_addr} "				\
-			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
-	"bootcmd_hdd=sata init "					\
-		"&& load sata ${hdpart} ${kernel_addr} /vmlinuz "	\
-		"&& load sata ${hdpart} ${ramdisk_addr} /initrd.img "	\
-		"&& setenv ramdisk_len ${filesize} "			\
-		"&& load sata ${hdpart} ${fdt_addr} /dtb "		\
-		"&& bootz ${kernel_addr} "				\
-			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
-	"bootcmd_usb=usb start "					\
-		"&& load usb 0:1 ${kernel_addr} /vmlinuz "		\
-		"&& load usb 0:1 ${ramdisk_addr} /initrd.img "		\
-		"&& setenv ramdisk_len ${filesize} "			\
-		"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "	\
-		"&& bootz ${kernel_addr} "				\
-			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
-	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
-	"eraseenv=sf probe 0 "						\
-		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
-			" +" __stringify(CONFIG_ENV_SIZE) "\0"		\
-	"config_nc_dhcp=setenv autoload_old ${autoload}; "		\
-		"setenv autoload no "					\
-		"&& bootp "						\
-		"&& setenv ncip "					\
-		"&& setenv autoload ${autoload_old}; "			\
-		"setenv autoload_old\0"					\
-	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; "	\
-		"setenv ncip; setenv gatewayip; setenv ethact; "	\
-		"setenv bootfile; setenv dnsip; "			\
-		"setenv bootsource legacy; run ser\0"			\
-	"restore_env=run standard_env; saveenv; reset\0"		\
-	"ser=setenv stdin serial; setenv stdout serial; "		\
-		"setenv stderr serial\0"				\
-	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"	\
-	"stdin=serial\0"						\
-	"stdout=serial\0"						\
-	"stderr=serial\0"
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS		{0, 1} /* enable port 1 only */
-#define CONFIG_PHY_BASE_ADR		7
-#undef CONFIG_RESET_PHY_R
-#endif /* CONFIG_CMD_NET */
-
-#ifdef CONFIG_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_SYS_64BIT_LBA
-#define CONFIG_LBA48
-#endif
-
-#endif /* _CONFIG_LSXL_H */
-- 
cgit v1.2.3