From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001
From: Iru Cai <mytbk920423@gmail.com>
Date: Wed, 30 Oct 2019 15:42:15 +0800
Subject: rm include/configs

---
 include/configs/rut.h | 124 --------------------------------------------------
 1 file changed, 124 deletions(-)
 delete mode 100644 include/configs/rut.h

(limited to 'include/configs/rut.h')

diff --git a/include/configs/rut.h b/include/configs/rut.h
deleted file mode 100644
index 296bdc2..0000000
--- a/include/configs/rut.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * siemens rut
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * U-Boot file:/include/configs/am335x_evm.h
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#ifndef __CONFIG_RUT_H
-#define __CONFIG_RUT_H
-
-#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_RUT
-
-#include "siemens-am33x-common.h"
-
-#define RUT_IOCTRL_VAL	0x18b
-#define DDR_PLL_FREQ	303
-
- /* Physical Memory Map */
-#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20) /* 256 MiB */
-
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED		100000
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
-
-#define CONFIG_PHY_NATSEMI
-
-#define CONFIG_FACTORYSET
-
-/* Watchdog */
-#define WATCHDOG_TRIGGER_GPIO	14
-
-#ifndef CONFIG_SPL_BUILD
-
-/* Use common default */
-
-/* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"hostname=rut\0" \
-	"ubi_off=2048\0"\
-	"nand_img_size=0x500000\0" \
-	"splashpos=m,m\0" \
-	"optargs=fixrtc --no-log consoleblank=0 \0" \
-	CONFIG_ENV_SETTINGS_V1 \
-	CONFIG_ENV_SETTINGS_NAND_V1 \
-	"mmc_dev=0\0" \
-	"mmc_root=/dev/mmcblk0p2 rw\0" \
-	"mmc_root_fs_type=ext4 rootwait\0" \
-	"mmc_load_uimage=" \
-		"mmc rescan; " \
-		"setenv bootfile uImage;" \
-		"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
-	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t $loadaddr $filesize\0" \
-	"mmc_args=run bootargs_defaults;" \
-		"mtdparts default;" \
-		"setenv bootargs ${bootargs} " \
-		"root=${mmc_root} ${mtdparts}" \
-		"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
-		"eth=${ethaddr} " \
-		"\0" \
-	"mmc_boot=run mmc_args; " \
-		"run mmc_load_uimage; " \
-		"bootm ${kloadaddr}\0" \
-	""
-
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-	"if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmc_dev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run mmc_load_uimage; then " \
-			"run mmc_args;" \
-			"bootm ${kloadaddr};" \
-		"fi;" \
-	"fi;" \
-	"run nand_boot;" \
-	"reset;"
-
-#else
-
-#define CONFIG_BOOTCOMMAND			\
-	"setenv autoload no; "			\
-	"dhcp; "				\
-	"if tftp 80000000 debrick.scr; then "	\
-		"source 80000000; "		\
-	"fi"
-#endif
-
-#endif /* CONFIG_SPL_BUILD */
-
-#if defined(CONFIG_VIDEO)
-#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
-#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
-
-#define BOARD_LCD_RESET		115	/* Bank 3 pin 19 */
-#define CONFIG_FORMIKE
-#define DISPL_PLL_SPREAD_SPECTRUM
-#endif
-
-#endif	/* ! __CONFIG_RUT_H */
-- 
cgit v1.2.3