From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Wed, 30 Oct 2019 15:42:15 +0800 Subject: rm include/configs --- include/configs/sam9x60ek.h | 95 --------------------------------------------- 1 file changed, 95 deletions(-) delete mode 100644 include/configs/sam9x60ek.h (limited to 'include/configs/sam9x60ek.h') diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h deleted file mode 100644 index 5f89ae4..0000000 --- a/include/configs/sam9x60ek.h +++ /dev/null @@ -1,95 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the SAM9X60EK board. - * - * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries - * - * Author: Sandeep Sheriker M - */ - -#ifndef __CONFIG_H__ -#define __CONFIG_H__ - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */ - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT - -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0 /* ignored in arm */ - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0) - * NB: in this case, USB 1.1 devices won't be recognized. - */ - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 megs */ - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_MASK_ALE BIT(21) -#define CONFIG_SYS_NAND_MASK_CLE BIT(22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 -#define CONFIG_SYS_NAND_ONFI_DETECTION - -#define CONFIG_MTD_DEVICE -#endif - -/* PMECC & PMERRLOC */ -#define CONFIG_ATMEL_NAND_HWECC -#define CONFIG_ATMEL_NAND_HW_PMECC -#define CONFIG_PMECC_CAP 8 -#define CONFIG_PMECC_SECTOR_SIZE 512 - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#ifdef CONFIG_SD_BOOT -/* bootstrap + u-boot + env + linux in sd card */ -#define CONFIG_BOOTCOMMAND \ - "fatload mmc 0:1 0x21000000 at91-sam9x60ek.dtb;" \ - "fatload mmc 0:1 0x22000000 zImage;" \ - "bootz 0x22000000 - 0x21000000" - -#elif defined(CONFIG_NAND_BOOT) -/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_BOOTCOMMAND "nand read " \ - "0x22000000 0x200000 0x600000; " \ - "nand read 0x21000000 0x180000 0x20000; " \ - "bootz 0x22000000 - 0x21000000" - -#elif defined(CONFIG_QSPI_BOOT) -/* bootstrap + u-boot + env + linux in SPI NOR flash */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x180000 0x80000; " \ - "sf read 0x22000000 0x200000 0x600000; " \ - "bootz 0x22000000 - 0x21000000" -#endif - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) - -#endif -- cgit v1.2.3