From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001
From: Iru Cai <mytbk920423@gmail.com>
Date: Wed, 30 Oct 2019 15:42:15 +0800
Subject: rm include/configs

---
 include/configs/ti_omap4_common.h | 130 --------------------------------------
 1 file changed, 130 deletions(-)
 delete mode 100644 include/configs/ti_omap4_common.h

(limited to 'include/configs/ti_omap4_common.h')

diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
deleted file mode 100644
index 1e31622..0000000
--- a/include/configs/ti_omap4_common.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated.
- * Aneesh V       <aneesh@ti.com>
- * Steve Sakoman  <steve@sakoman.com>
- *
- * TI OMAP4 common configuration settings
- */
-
-#ifndef __CONFIG_TI_OMAP4_COMMON_H
-#define __CONFIG_TI_OMAP4_COMMON_H
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-#define CONFIG_SYS_L2_PL310		1
-#define CONFIG_SYS_PL310_BASE	0x48242000
-#endif
-
-/* Get CPU defs */
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE		GPT2_BASE
-
-/*
- * For the DDR timing information we can either dynamically determine
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method.  Default to the static timing infomation.
- */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
-#include <configs/ti_armv7_omap.h>
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550_CLK		48000000
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_COM3		UART3_BASE
-#endif
-
-/* TWL6030 */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_TWL6030_POWER		1
-#endif
-
-/* USB */
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-
-/*
- * Environment setup
- */
-#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
-	"bootcmd_" #devtypel #instance "=" \
-	"setenv mmcdev " #instance"; "\
-	"setenv bootpart " #instance":2 ; "\
-	"run mmcboot\0"
-
-#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
-	#devtypel #instance " "
-
-#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
-	#devtypel #instance " "
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(LEGACY_MMC, legacy_mmc, 0) \
-	func(MMC, mmc, 1) \
-	func(LEGACY_MMC, legacy_mmc, 1) \
-	func(PXE, pxe, na) \
-	func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-#include <environment/ti/mmc.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV \
-	DEFAULT_MMC_TI_ARGS \
-	DEFAULT_FIT_TI_ARGS \
-	"console=ttyO2,115200n8\0" \
-	"fdtfile=undefined\0" \
-	"bootpart=0:2\0" \
-	"bootdir=/boot\0" \
-	"bootfile=zImage\0" \
-	"usbtty=cdc_acm\0" \
-	"vram=16M\0" \
-	"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
-	"uimageboot=echo Booting from mmc${mmcdev} ...; " \
-		"run args_mmc; " \
-		"bootm ${loadaddr}\0" \
-	"findfdt="\
-		"if test $board_name = sdp4430; then " \
-			"setenv fdtfile omap4-sdp.dtb; fi; " \
-		"if test $board_name = panda; then " \
-			"setenv fdtfile omap4-panda.dtb; fi;" \
-		"if test $board_name = panda-a4; then " \
-			"setenv fdtfile omap4-panda-a4.dtb; fi;" \
-		"if test $board_name = panda-es; then " \
-			"setenv fdtfile omap4-panda-es.dtb; fi;" \
-		"if test $board_name = duovero; then " \
-			"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
-		"if test $fdtfile = undefined; then " \
-			"echo WARNING: Could not determine device tree to use; fi; \0" \
-	BOOTENV
-
-/*
- * Defines for SPL
- * It is known that this will break HS devices. Since the current size of
- * SPL is overlapped with public stack and breaking non HS devices to boot.
- * So moving TEXT_BASE down to non-HS limit.
- */
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
-					 (128 << 20))
-
-#ifdef CONFIG_SPL_BUILD
-/* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
-#undef CONFIG_SYS_I2C
-#endif
-
-#endif /* __CONFIG_TI_OMAP4_COMMON_H */
-- 
cgit v1.2.3