From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001
From: Iru Cai <mytbk920423@gmail.com>
Date: Wed, 30 Oct 2019 15:42:15 +0800
Subject: rm include/configs

---
 include/configs/vinco.h | 109 ------------------------------------------------
 1 file changed, 109 deletions(-)
 delete mode 100644 include/configs/vinco.h

(limited to 'include/configs/vinco.h')

diff --git a/include/configs/vinco.h b/include/configs/vinco.h
deleted file mode 100644
index eebb3f7..0000000
--- a/include/configs/vinco.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration settings for the VInCo platform.
- *
- * Based on the settings for the SAMA5-EK board
- * Copyright (C) 2014 Atmel
- *		      Bo Shen <voice.shen@atmel.com>
- * Copyright (C) 2015 Free Electrons
- *		      Gregory CLEMENT gregory.clement@free-electrons.com
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "at91-sama5_common.h"
-
-/* The value in the common file is too far away for the VInCo platform */
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		0xfc00c000
-#define CONFIG_USART_ID			30
-
-/* Timer */
-#define CONFIG_SYS_TIMER_COUNTER	0xfc06863c
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE           0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x4000000
-
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
-
-/* SerialFlash */
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI0
-#define CONFIG_SPI_FLASH_STMICRO
-#endif
-
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI			0xfc000000
-#define CONFIG_SYS_MMC_CLK_OD		500000
-
-/* For generating MMC partitions */
-
-#endif
-
-/* USB device */
-
-/* Ethernet Hardware */
-#define CONFIG_PHY_SMSC
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB_SEARCH_PHY
-
-#ifdef CONFIG_SPI_BOOT
-/* bootstrap + u-boot + env + linux in serial flash */
-/* Use our own mapping for the VInCo platform */
-#undef CONFIG_ENV_OFFSET
-#undef CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OFFSET       0x10000
-#define CONFIG_ENV_SIZE         0x10000
-
-/* Update the bootcommand according to our mapping for the VInCo platform */
-#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND  "mmc dev 0 0;" \
-			    "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \
-			    "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
-			    "bootz ${loadaddr} -  ${oftaddr}"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"kernel_start=0x20000\0" \
-	"kernel_size=0x800000\0" \
-	"mmcblksize=0x200\0" \
-	"oftaddr=0x21000000\0" \
-	"loadaddr=0x22000000\0" \
-	"update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \
-	"sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \
-	"create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \
-	"setexpr rootfs_start ${kernel_start} + ${kernel_size};" \
-	"setenv partitions 'name=kernel,size=${kernel_size}," \
-	"start=${kernel_start};name=rootfs,size=-';" \
-	"gpt write mmc 0 ${partitions} \0"\
-	"f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \
-	"setexpr fileblksize ${fileblksize} + 1\0" \
-	"store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \
-	"setexpr k_blksize ${fileblksize};" \
-	"setexpr k_offset ${kernel_start} / ${mmcblksize};" \
-	"mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \
-	"store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \
-	"setexpr dtb_blksize ${fileblksize};" \
-	"setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \
-	"mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \
-	"store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \
-	"setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \
-	"mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \
-	"bootdelay=0\0"
-
-#endif
-
-#endif
-- 
cgit v1.2.3