From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Wed, 30 Oct 2019 15:42:15 +0800 Subject: rm include/configs --- include/configs/x530.h | 122 ------------------------------------------------- 1 file changed, 122 deletions(-) delete mode 100644 include/configs/x530.h (limited to 'include/configs/x530.h') diff --git a/include/configs/x530.h b/include/configs/x530.h deleted file mode 100644 index 2269d1e..0000000 --- a/include/configs/x530.h +++ /dev/null @@ -1,122 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2018 Allied Telesis Labs - */ - -#ifndef _CONFIG_X530_H -#define _CONFIG_X530_H - -/* - * High Level Configuration Options (easy to change) - */ - -#define CONFIG_DISPLAY_BOARDINFO_LATE - -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#if !defined(CONFIG_DM_SERIAL) -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE -#endif - -/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ - -/* - * Commands configuration - */ -#define CONFIG_CMD_PCI - -/* NAND */ -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define BBT_CUSTOM_SCAN -#define BBT_CUSTOM_SCAN_PAGE 0 -#define BBT_CUSTOM_SCAN_POSITION 2048 - -/* SPI NOR flash default params, used by sf commands */ - -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)" -#define MTDPARTS_MTDOOPS "errlog" - -/* Partition support */ - -/* Additional FS support/configuration */ - -/* USB/EHCI configuration */ -#define CONFIG_EHCI_IS_TDI - -/* Environment in SPI NOR flash */ -#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ -#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ -#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ -#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET - -#define CONFIG_PHY_MARVELL /* there is a marvell phy */ -#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ - -/* PCIe support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PCI_SCAN_SHOW -#endif - -/* NAND */ -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_LZO -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_MTDPARTS - -#define CONFIG_SYS_MALLOC_LEN (4 << 20) - -#include - -/* - * Other required minimal configurations - */ -#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ - -#define CONFIG_SYS_ALT_MEMTEST - -/* Keep device tree and initrd in low memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fdt_high=0x10000000\0" \ - "initrd_high=0x10000000\0" - -#define CONFIG_SYS_LOAD_ADDR 0x1000000 -#define CONFIG_UBI_PART user -#define CONFIG_UBIFS_VOLUME user - -/* SPL */ - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -/* SPL related SPI defines */ -#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS - -#endif /* _CONFIG_X530_H */ -- cgit v1.2.3