From 1a691f101632955a994a0198fc5498b108e97fbc Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Wed, 30 Oct 2019 15:42:15 +0800 Subject: rm include/configs --- include/configs/x600.h | 238 ------------------------------------------------- 1 file changed, 238 deletions(-) delete mode 100644 include/configs/x600.h (limited to 'include/configs/x600.h') diff --git a/include/configs/x600.h b/include/configs/x600.h deleted file mode 100644 index d4bbdcd..0000000 --- a/include/configs/x600.h +++ /dev/null @@ -1,238 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2009, STMicroelectronics - All Rights Reserved - * Author(s): Vipin Kumar, for STMicroelectronics. - * - * Copyright (C) 2012, 2015 Stefan Roese - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SPEAR600 /* SPEAr600 SoC */ -#define CONFIG_X600 /* on X600 board */ - -#include - -/* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ_CLOCK 8300000 - -#define CONFIG_SYS_FLASH_BASE 0xf8000000 -/* Reserve 8KiB for SPL */ -#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */ -#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO -#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_SPL_LEN) -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN 0x60000 - -/* Serial Configuration (PL011) */ -#define CONFIG_SYS_SERIAL0 0xD0000000 -#define CONFIG_SYS_SERIAL1 0xD0080000 -#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1 } -#define CONFIG_PL011_CLOCK (48 * 1000 * 1000) -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \ - 57600, 115200 } -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* NOR FLASH config options */ -#define CONFIG_ST_SMI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000 -#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ) - -/* NAND FLASH config options */ -#define CONFIG_NAND_FSMC -#define CONFIG_SYS_NAND_SELF_INIT -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE -#define CONFIG_MTD_ECC_SOFT -#define CONFIG_SYS_FSMC_NAND_8BIT -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_ECC_BCH - -/* UBI/UBI config options */ - -/* Ethernet config options */ -#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ - -#define CONFIG_SPEAR_GPIO - -/* I2C config options */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_BASE 0xD0200000 -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x02 -#define CONFIG_I2C_CHIPADDRESS 0x50 - -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* FPGA config options */ -#define CONFIG_FPGA_COUNT 1 - -/* USB EHCI options */ -#define CONFIG_USB_EHCI_SPEAR -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* - * U-Boot Environment placing definitions. - */ -#define CONFIG_ENV_SECT_SIZE 0x00010000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x02000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* Miscellaneous configurable options */ -#define CONFIG_BOOT_PARAMS_ADDR 0x00000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -#define CONFIG_SYS_MEMTEST_START 0x00800000 -#define CONFIG_SYS_MEMTEST_END 0x04000000 -#define CONFIG_SYS_MALLOC_LEN (8 << 20) -#define CONFIG_SYS_LOAD_ADDR 0x00800000 - -#define CONFIG_HOSTNAME "x600" -#define CONFIG_UBI_PART ubi0 -#define CONFIG_UBIFS_VOLUME rootfs - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr=1000000\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.spr\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};" \ - "erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \ - "cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " ${filesize};" \ - "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize}\0" \ - "upd=run load update\0" \ - "ubifs=" CONFIG_HOSTNAME "/ubifs.img\0" \ - "part=" __stringify(CONFIG_UBI_PART) "\0" \ - "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \ - "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \ - "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \ - " ${filesize}\0" \ - "upd_ubifs=run load_ubifs update_ubifs\0" \ - "init_ubifs=nand erase.part ubi0;ubi part ${part};" \ - "ubi create ${vol} 4000000\0" \ - "netdev=eth0\0" \ - "rootpath=/opt/eldk-4.2/arm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "boot_part=0\0" \ - "altbootcmd=if test $boot_part -eq 0;then " \ - "echo Switching to partition 1!;" \ - "setenv boot_part 1;" \ - "else; " \ - "echo Switching to partition 0!;" \ - "setenv boot_part 0;" \ - "fi;" \ - "saveenv;boot\0" \ - "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \ - "root=ubi0:rootfs rootfstype=ubifs\0" \ - "kernel=" CONFIG_HOSTNAME "/uImage\0" \ - "kernel_fs=/boot/uImage \0" \ - "kernel_addr=1000000\0" \ - "dtb=" CONFIG_HOSTNAME "/" \ - CONFIG_HOSTNAME ".dtb\0" \ - "dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0" \ - "dtb_addr=1800000\0" \ - "load_kernel=tftp ${kernel_addr} ${kernel}\0" \ - "load_dtb=tftp ${dtb_addr} ${dtb}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addcon=setenv bootargs ${bootargs} console=ttyAMA0," \ - "${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "net_nfs=run load_dtb load_kernel; " \ - "run nfsargs addip addcon addmtd addmisc;" \ - "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ - " addcon addmisc addmtd;" \ - "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0" \ - "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ - "ubifsload ${dtb_addr} ${dtb_fs};\0" \ - "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ - "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \ - "bootcmd=run nand_ubifs\0" \ - "\0" - -/* Physical Memory Map */ -#define PHYS_SDRAM_1 0x00000000 -#define PHYS_SDRAM_1_MAXSIZE 0x40000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SRAM_BASE 0xd2800000 -/* Preserve the last 2 lwords for the boot-counter */ -#define CONFIG_SRAM_SIZE ((8 << 10) - 0x8) -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* - * SPL related defines - */ -#define CONFIG_SPL_MAX_SIZE (CONFIG_SRAM_SIZE - 0xb00) -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear" - -/* - * Please select/define only one of the following - * Each definition corresponds to a supported DDR chip. - * DDR configuration is based on the following selection - */ -#define CONFIG_DDR_MT47H64M16 1 -#define CONFIG_DDR_MT47H32M16 0 -#define CONFIG_DDR_MT47H128M8 0 - -/* - * Synchronous/Asynchronous operation of DDR - * - * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation - * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation - * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation - */ -#define CONFIG_DDR_2HCLK 1 -#define CONFIG_DDR_HCLK 0 -#define CONFIG_DDR_PLL2 0 - -/* - * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported - * or not. Modify/Add to only these macros to define new boot types - */ -#define USB_BOOT_SUPPORTED 0 -#define PCIE_BOOT_SUPPORTED 0 -#define SNOR_BOOT_SUPPORTED 1 -#define NAND_BOOT_SUPPORTED 1 -#define PNOR_BOOT_SUPPORTED 0 -#define TFTP_BOOT_SUPPORTED 0 -#define UART_BOOT_SUPPORTED 0 -#define SPI_BOOT_SUPPORTED 0 -#define I2C_BOOT_SUPPORTED 0 -#define MMC_BOOT_SUPPORTED 0 - -#endif /* __CONFIG_H */ -- cgit v1.2.3