From 63cf543b3cc4d6e21d680bde234f697a5588c66e Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Wed, 30 Oct 2019 15:44:39 +0800 Subject: rm include/dt-bindings --- include/dt-bindings/pinctrl/omap.h | 93 -------------------------------------- 1 file changed, 93 deletions(-) delete mode 100644 include/dt-bindings/pinctrl/omap.h (limited to 'include/dt-bindings/pinctrl/omap.h') diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h deleted file mode 100644 index 58fe28f..0000000 --- a/include/dt-bindings/pinctrl/omap.h +++ /dev/null @@ -1,93 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * This header provides constants for OMAP pinctrl bindings. - * - * Copyright (C) 2009 Nokia - * Copyright (C) 2009-2010 Texas Instruments - */ - -#ifndef _DT_BINDINGS_PINCTRL_OMAP_H -#define _DT_BINDINGS_PINCTRL_OMAP_H - -/* 34xx mux mode options for each pin. See TRM for options */ -#define MUX_MODE0 0 -#define MUX_MODE1 1 -#define MUX_MODE2 2 -#define MUX_MODE3 3 -#define MUX_MODE4 4 -#define MUX_MODE5 5 -#define MUX_MODE6 6 -#define MUX_MODE7 7 - -/* 24xx/34xx mux bit defines */ -#define PULL_ENA (1 << 3) -#define PULL_UP (1 << 4) -#define ALTELECTRICALSEL (1 << 5) - -/* 34xx specific mux bit defines */ -#define INPUT_EN (1 << 8) -#define OFF_EN (1 << 9) -#define OFFOUT_EN (1 << 10) -#define OFFOUT_VAL (1 << 11) -#define OFF_PULL_EN (1 << 12) -#define OFF_PULL_UP (1 << 13) -#define WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ -#define WAKEUP_EVENT (1 << 15) - -/* Active pin states */ -#define PIN_OUTPUT 0 -#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) -#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) -#define PIN_INPUT INPUT_EN -#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) - -/* Off mode states */ -#define PIN_OFF_NONE 0 -#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL) -#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN) -#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP) -#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN) -#define PIN_OFF_WAKEUPENABLE WAKEUP_EN - -/* - * Macros to allow using the absolute physical address instead of the - * padconf registers instead of the offset from padconf base. - */ -#define OMAP_IOPAD_OFFSET(pa, offset) (((pa) & 0xffff) - (offset)) - -#define OMAP2420_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0030) (val) -#define OMAP2430_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2030) (val) -#define OMAP3_CORE1_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2030) (val) -#define OMAP3430_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25d8) (val) -#define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val) -#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val) -#define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) -#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) -#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) - -/* - * Macros to allow using the offset from the padconf physical address - * instead of the offset from padconf base. - */ -#define OMAP_PADCONF_OFFSET(offset, base_offset) ((offset) - (base_offset)) - -#define OMAP4_IOPAD(offset, val) OMAP_PADCONF_OFFSET((offset), 0x0040) (val) -#define OMAP5_IOPAD(offset, val) OMAP_PADCONF_OFFSET((offset), 0x0040) (val) - -/* - * Define some commonly used pins configured by the boards. - * Note that some boards use alternative pins, so check - * the schematics before using these. - */ -#define OMAP3_UART1_RX 0x152 -#define OMAP3_UART2_RX 0x14a -#define OMAP3_UART3_RX 0x16e -#define OMAP4_UART2_RX 0xdc -#define OMAP4_UART3_RX 0x104 -#define OMAP4_UART4_RX 0x11c - -#endif - -- cgit v1.2.3