init. 1AQQW051HEADmaster

2 files changed, 217 insertions, 0 deletions

diff --git a/Board/EM/RapidStartWrapper/Include/Mbr.h b/Board/EM/RapidStartWrapper/Include/Mbr.h
new file mode 100644
index 0000000..5a04738
--- /dev/null
+++ b/Board/EM/RapidStartWrapper/Include/Mbr.h
@@ -0,0 +1,72 @@
+/** @file
+  EFI Mbr Partition Generic Driver Header. This header contains Data structures and Definitions
+  needed to recognize partitions in a MBR
+
+@copyright
+  Copyright (c) 2006 - 2012 Intel Corporation. All rights reserved
+  This software and associated documentation (if any) is furnished
+  under a license and may only be used or copied in accordance
+  with the terms of the license. Except as permitted by such
+  license, no part of this software or documentation may be
+  reproduced, stored in a retrieval system, or transmitted in any
+  form or by any means without the express written consent of
+  Intel Corporation.
+
+  This file contains a 'Sample Driver' and is licensed as such
+  under the terms of your license agreement with Intel or your
+  vendor.  This file may be modified by the user, subject to
+  the additional terms of the license agreement
+**/
+#ifndef _MBR_H
+#define _MBR_H
+
+#define MBR_SIGNATURE       0xAA55
+#define NUM_MBR_PARTITIONS  4
+
+///
+/// Type definitions for the Hard drive device path
+///
+#define MBR_TYPE_MASTER_BOOT_RECORD         0x01
+#define MBR_TYPE_EFI_PARTITION_TABLE_HEADER 0x02
+
+///
+/// Needed Partition Type definitions for MBR
+///
+#define NO_PARTITION              0x0
+#define EXTENDED_PARTITION        0x05
+#define WIN95_EXTENDED_PARTITION  0x0F
+
+//
+// Data Structures needed for MBR
+//
+#pragma pack(1)
+
+///
+/// Data Structure definition for each partition in the MBR
+///
+typedef struct _MBR_PARTITION {
+  UINT8   BootIndicator;
+  UINT8   StartHead;
+  UINT8   StartSector;
+  UINT8   StartTrack;
+  UINT8   OSType;
+  UINT8   EndHead;
+  UINT8   EndSector;
+  UINT8   EndTrack;
+  UINT32  StartingLba;
+  UINT32  SizeInLba;
+} MBR_PARTITION;
+
+///
+/// Data Structure definition of the MBR located in the first block on an MBR drive
+///
+typedef struct _MASTER_BOOT_RECORD {
+  UINT8         BootCode[440];
+  UINT32        UniqueMbrSig;
+  UINT16        Unknown;
+  MBR_PARTITION PartRec[4];
+  UINT16        Sig;
+} MASTER_BOOT_RECORD;
+
+#pragma pack()
+#endif
diff --git a/Board/EM/RapidStartWrapper/Include/UefiGpt.h b/Board/EM/RapidStartWrapper/Include/UefiGpt.h
new file mode 100644
index 0000000..1ba0cf0
--- /dev/null
+++ b/Board/EM/RapidStartWrapper/Include/UefiGpt.h
@@ -0,0 +1,145 @@
+/** @file
+  EFI Guid Partition Table Format Definition.
+
+@copyright
+  Copyright (c) 2006 - 2012 Intel Corporation. All rights reserved
+  This software and associated documentation (if any) is furnished
+  under a license and may only be used or copied in accordance
+  with the terms of the license. Except as permitted by such
+  license, no part of this software or documentation may be
+  reproduced, stored in a retrieval system, or transmitted in any
+  form or by any means without the express written consent of
+  Intel Corporation.
+
+  This file contains a 'Sample Driver' and is licensed as such
+  under the terms of your license agreement with Intel or your
+  vendor.  This file may be modified by the user, subject to
+  the additional terms of the license agreement
+**/
+
+#ifndef __UEFI_GPT_H__
+#define __UEFI_GPT_H__
+
+///
+/// The primary GUID Partition Table Header must be
+/// located in LBA 1 (i.e., the second logical block).
+///
+#define PRIMARY_PART_HEADER_LBA 1
+///
+/// EFI Partition Table Signature: "EFI PART".
+///
+#define EFI_PTAB_HEADER_ID      SIGNATURE_64 ('E','F','I',' ','P','A','R','T')
+
+#pragma pack(1)
+
+///
+/// GPT Partition Table Header.
+///
+typedef struct {
+  ///
+  /// The table header for the GPT partition Table.
+  /// This header contains EFI_PTAB_HEADER_ID.
+  ///
+  EFI_TABLE_HEADER  Header;
+  ///
+  /// The LBA that contains this data structure.
+  ///
+  EFI_LBA           MyLBA;
+  ///
+  /// LBA address of the alternate GUID Partition Table Header.
+  ///
+  EFI_LBA           AlternateLBA;
+  ///
+  /// The first usable logical block that may be used
+  /// by a partition described by a GUID Partition Entry.
+  ///
+  EFI_LBA           FirstUsableLBA;
+  ///
+  /// The last usable logical block that may be used
+  /// by a partition described by a GUID Partition Entry.
+  ///
+  EFI_LBA           LastUsableLBA;
+  ///
+  /// GUID that can be used to uniquely identify the disk.
+  ///
+  EFI_GUID          DiskGUID;
+  ///
+  /// The starting LBA of the GUID Partition Entry array.
+  ///
+  EFI_LBA           PartitionEntryLBA;
+  ///
+  /// The number of Partition Entries in the GUID Partition Entry array.
+  ///
+  UINT32            NumberOfPartitionEntries;
+  ///
+  /// The size, in bytes, of each the GUID Partition
+  /// Entry structures in the GUID Partition Entry
+  /// array. This field shall be set to a value of 128 x 2^n where n is
+  /// an integer greater than or equal to zero (e.g., 128, 256, 512, etc.).
+  ///
+  UINT32            SizeOfPartitionEntry;
+  ///
+  /// The CRC32 of the GUID Partition Entry array.
+  /// Starts at PartitionEntryLBA and is
+  /// computed over a byte length of
+  /// NumberOfPartitionEntries * SizeOfPartitionEntry.
+  ///
+  UINT32            PartitionEntryArrayCRC32;
+} EFI_PARTITION_TABLE_HEADER;
+
+///
+/// GPT Partition Entry.
+///
+typedef struct {
+  ///
+  /// Unique ID that defines the purpose and type of this Partition. A value of
+  /// zero defines that this partition entry is not being used.
+  ///
+  EFI_GUID  PartitionTypeGUID;
+  ///
+  /// GUID that is unique for every partition entry. Every partition ever
+  /// created will have a unique GUID.
+  /// This GUID must be assigned when the GUID Partition Entry is created.
+  ///
+  EFI_GUID  UniquePartitionGUID;
+  ///
+  /// Starting LBA of the partition defined by this entry
+  ///
+  EFI_LBA   StartingLBA;
+  ///
+  /// Ending LBA of the partition defined by this entry.
+  ///
+  EFI_LBA   EndingLBA;
+  ///
+  /// Attribute bits, all bits reserved by UEFI
+  /// Bit 0:      If this bit is set, the partition is required for the platform to function. The owner/creator of the
+  ///             partition indicates that deletion or modification of the contents can result in loss of platform
+  ///             features or failure for the platform to boot or operate. The system cannot function normally if
+  ///             this partition is removed, and it should be considered part of the hardware of the system.
+  ///             Actions such as running diagnostics, system recovery, or even OS install or boot, could
+  ///             potentially stop working if this partition is removed. Unless OS software or firmware
+  ///             recognizes this partition, it should never be removed or modified as the UEFI firmware or
+  ///             platform hardware may become non-functional.
+  /// Bit 1:      If this bit is set, then firmware must not produce an EFI_BLOCK_IO_PROTOCOL device for
+  ///             this partition. By not producing an EFI_BLOCK_IO_PROTOCOL partition, file system
+  ///             mappings will not be created for this partition in UEFI.
+  /// Bit 2:      This bit is set aside to let systems with traditional PC-AT BIOS firmware implementations
+  ///             inform certain limited, special-purpose software running on these systems that a GPT
+  ///             partition may be bootable. The UEFI boot manager must ignore this bit when selecting
+  ///             a UEFI-compliant application, e.g., an OS loader.
+  /// Bits 3-47:  Undefined and must be zero. Reserved for expansion by future versions of the UEFI
+  ///             specification.
+  /// Bits 48-63: Reserved for GUID specific use. The use of these bits will vary depending on the
+  ///             PartitionTypeGUID. Only the owner of the PartitionTypeGUID is allowed
+  ///             to modify these bits. They must be preserved if Bits 0-47 are modified..
+  ///
+  UINT64    Attributes;
+  ///
+  /// Null-terminated name of the partition.
+  ///
+  CHAR16    PartitionName[36];
+} EFI_PARTITION_ENTRY;
+
+#pragma pack()
+#endif
+