diff options
| -rw-r--r-- | CRB/CRB.sdl | 810 | ||||
| -rw-r--r-- | ReferenceCode/Chipset/LynxPoint/AcpiTables/Dsdt/Pch.asl | 15 |
2 files changed, 415 insertions, 410 deletions
diff --git a/CRB/CRB.sdl b/CRB/CRB.sdl index 61cdae2..b734437 100644 --- a/CRB/CRB.sdl +++ b/CRB/CRB.sdl @@ -2378,411 +2378,411 @@ TOKEN TokenType = Expression End -TOKEN - Name = "GPIO_SYNC_UP_WITH_INTEL_BIOS" - Value = "0" - Help = "Enable for debugging only" - TokenType = Boolean - TargetH = Yes -End - -TOKEN - Name = "GPIO_001" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_002" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_004" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_005" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_007" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_008" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_011" - Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_013" - Value = "$(IS_GPIO) + $(IS_GPI) + $(GPI_INV)" - Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" - TokenType = Integer - TargetEQU = Yes - TargetH = Yes -End - -TOKEN - Name = "GPIO_013" - Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_014" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_016" - Value = "$(IS_NOT_GPIO)" - Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" - TokenType = Integer - TargetEQU = Yes - TargetH = Yes -End - -TOKEN - Name = "GPIO_017" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)+$(GPI_INV)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_018" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_019" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_021" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_022" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_024" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_025" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_026" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_028" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_032" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_033" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_035" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_036" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_037" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_038" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_039" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_044" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_045" - Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_046" - Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_047" - Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_048" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_051" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_053" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_055" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_060" - Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_LOW)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_070" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_071" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_072" - Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End - -TOKEN - Name = "GPIO_074" - Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" - Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." - TokenType = Integer - TargetEQU = Yes - TargetH = Yes - Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" -End +##TOKEN +## Name = "GPIO_SYNC_UP_WITH_INTEL_BIOS" +## Value = "0" +## Help = "Enable for debugging only" +## TokenType = Boolean +## TargetH = Yes +##End +## +##TOKEN +## Name = "GPIO_001" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_002" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_004" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_005" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_007" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_008" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_011" +## Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_013" +## Value = "$(IS_GPIO) + $(IS_GPI) + $(GPI_INV)" +## Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +##End +## +##TOKEN +## Name = "GPIO_013" +## Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_014" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)+$(GPI_INV)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_016" +## Value = "$(IS_NOT_GPIO)" +## Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +##End +## +##TOKEN +## Name = "GPIO_017" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)+$(GPI_INV)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_018" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_019" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_021" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_022" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_024" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_025" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_026" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_028" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_032" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_033" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_035" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_036" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_037" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_038" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_039" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_044" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_045" +## Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_046" +## Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_047" +## Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_048" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_051" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_053" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_055" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_060" +## Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_LOW)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_070" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_071" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_072" +## Value = "$(IS_GPIO)+$(IS_GPO)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End +## +##TOKEN +## Name = "GPIO_074" +## Value = "$(IS_GPIO)+$(IS_GPI)+$(OUTPUT_HIGH)" +## Help = "BIT0:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\BIT1:GPIO Input/Output Select.\BIT2:GPIO Level Select.\BIT3:GPIO Signal Invert(Only For GPIO_00~31).\BIT4:GPIO Blink Enable(Only For GPIO_00~31).\BIT5:GPIO Reset Select." +## TokenType = Integer +## TargetEQU = Yes +## TargetH = Yes +## Token = "GPIO_SYNC_UP_WITH_INTEL_BIOS" "=" "1" +##End TOKEN diff --git a/ReferenceCode/Chipset/LynxPoint/AcpiTables/Dsdt/Pch.asl b/ReferenceCode/Chipset/LynxPoint/AcpiTables/Dsdt/Pch.asl index 1bf7119..fed9b54 100644 --- a/ReferenceCode/Chipset/LynxPoint/AcpiTables/Dsdt/Pch.asl +++ b/ReferenceCode/Chipset/LynxPoint/AcpiTables/Dsdt/Pch.asl @@ -559,7 +559,8 @@ scope (\_SB.PCI0) { // Device(GLAN) { // GbE Controller Name(_ADR, 0x00190000) - Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state +// Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state + Method(_PRW, 0) { Return(GPRW(0, 0)) } // can wakeup from S4 state Method(_STA,0) { Return(0) // Hide device @@ -572,7 +573,8 @@ scope (\_SB.PCI0) { Device(EHC1) { Name(_ADR, 0x001D0000) include("PchEhci1.asl") - Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state +// Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state + Method(_PRW, 0) { Return(GPRW(0, 0)) } // can wakeup from S4 state } // end "EHCI Controller #1" // @@ -581,7 +583,8 @@ scope (\_SB.PCI0) { Device(EHC2) { Name(_ADR, 0x001A0000) include("PchEhci2.asl") - Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state +// Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state + Method(_PRW, 0) { Return(GPRW(0, 0)) } // can wakeup from S4 state } // end "EHCI Controller #2" // @@ -590,7 +593,8 @@ scope (\_SB.PCI0) { Device(XHC) { Name(_ADR, 0x00140000) include("PchXhci.asl") - Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state +// Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state + Method(_PRW, 0) { Return(GPRW(0, 0)) } // can wakeup from S4 state } // end "xHCI Controller" // @@ -599,7 +603,8 @@ scope (\_SB.PCI0) { Device(HDEF) { Name(_ADR, 0x001B0000) include("PchAudio.asl") - Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state +// Method(_PRW, 0) { Return(GPRW(0x0D, 4)) } // can wakeup from S4 state + Method(_PRW, 0) { Return(GPRW(0, 0)) } // can wakeup from S4 state } // end "High Definition Audio Controller" #ifdef SERIAL_IO_FLAG |