diff options
Diffstat (limited to 'Board/EM/SwitchableGraphics/SgTpv/MXM30/NBCIEfi.c')
| -rw-r--r-- | Board/EM/SwitchableGraphics/SgTpv/MXM30/NBCIEfi.c | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/Board/EM/SwitchableGraphics/SgTpv/MXM30/NBCIEfi.c b/Board/EM/SwitchableGraphics/SgTpv/MXM30/NBCIEfi.c new file mode 100644 index 0000000..eeaf289 --- /dev/null +++ b/Board/EM/SwitchableGraphics/SgTpv/MXM30/NBCIEfi.c @@ -0,0 +1,367 @@ +//********************************************************************** +//********************************************************************** +//** ** +//** (C)Copyright 1985-2012, American Megatrends, Inc. ** +//** ** +//** All Rights Reserved. ** +//** ** +//** 5555 Oakbrook Pkwy, Suite 200, Norcross, GA 30093 ** +//** ** +//** Phone: (770)-246-8600 ** +//** ** +//********************************************************************** +//********************************************************************** +//********************************************************************** +// $Header: /Alaska/SOURCE/Modules/SharkBayRefCodes/SwitchableGraphics/Sg TPV/Sg nVidia API/NBCIEfi.c 2 9/09/12 11:12p Joshchou $ +// +// $Revision: 2 $ +// +// $Date: 9/09/12 11:12p $ +//********************************************************************** +// Revision History +// ---------------- +// $Log: /Alaska/SOURCE/Modules/SharkBayRefCodes/SwitchableGraphics/Sg TPV/Sg nVidia API/NBCIEfi.c $ +// +// 2 9/09/12 11:12p Joshchou +// [TAG] None +// [Category] Improvement +// [Description] Tpv module support for sharkbay. +// [Files] MXM30.mak +// Mxm30Dxe.dxs +// Mxm30Dxe.c +// Mxm30Efi.c +// NBCIEfi.c +// MxmInt15.asm +// MXM30.cif +// +// 1 6/27/11 5:25a Alanlin +// [TAG] EIP61848 +// [Category] New Feature +// [Description] Initial check-in.Integrated SwitchableGraphics Intel +// Reference code 0.6.0 +// [Files] MXM30.cif +// MXM30.sdl +// MXM30.mak +// Mxm30Dxe.dxs +// Mxm30Dxe.c +// Mxm30Efi.c +// NBCIEfi.c +// MxmInt15.asm +// Mxm30ElkCreek4.mxm +// Mxm30ElkCreekIII.mxm +// +// +// 1 9/17/10 1:16p Alexp +// [TAG] EIP43103 +// [Category] Function Request +// [Severity] Normal +// [Symptom] Initial check-in of SgTPV module +// [RootCause] Request to implement SG reference code . +// [Solution] Initial check-in. +// [Files] +// Mxm30.cif;*.sdl;*.mak; +// Mxm30Dxe.c;*.dxs +// Mxm30efi.c +// MxmInt15.asm +// NbciEfi.c +// Mxm30ElkCreek3(4).mxm +// +//********************************************************************** +//<AMI_FHDR_START> +//---------------------------------------------------------------------------- +// +// Name: NBCIEfi.c +// +// Description: This file installs +// Nbci EFI protocol +// +// Notes: MAKE SURE NO PEI OR DXE SPECIFIC CODE IS NEEDED +// +//---------------------------------------------------------------------------- +//<AMI_FHDR_END> +#include <Token.h> +#include <AmiDxeLib.h> +#include <DXE.h> + +#include <Protocol\NBCI.h> + +extern EFI_BOOT_SERVICES *pBS; +extern EFI_RUNTIME_SERVICES *pRS; + +// Defined in Mxm30Dxe.c +extern VOID *gMxmLegMemAddr; +extern UINTN gMxmLegMemSize; +///////////////////////////////////////// +// Nbci EFI PROTOCOL PROTOTYPES // +///////////////////////////////////////// + +EFI_STATUS NbciReturnSpecLevel ( + IN NBCI_EFI_PROTOCOL *This, + IN OUT CHAR8 *pucRevisionLevel, + OUT UINTN *puSupportFuncs +); + +EFI_STATUS NbciReturnStructure ( + IN NBCI_EFI_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN OUT CHAR16 usStructSize, + IN CHAR16 usDataBlockID, + OUT CHAR8 *pNbciStruct +); + +EFI_STATUS NbciSelectOutputDevice ( + IN NBCI_EFI_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN OUT CHAR16 usStructSize, + IN EFI_HANDLE ChildHandle, + IN CHAR8 ucOutputSetting +); + +EFI_STATUS NbciCheckOutputDevice ( + IN NBCI_EFI_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN OUT CHAR16 usStructSize, + IN EFI_HANDLE ChildHandle, + OUT CHAR8 ucDisplayAvailable +); + +NBCI_EFI_PROTOCOL NBCIProtocol = { + NbciReturnSpecLevel, + NbciReturnStructure, + NbciSelectOutputDevice, + NbciCheckOutputDevice +}; + +// Auxilary Functions. Defined in Mxm30Efi.c +EFI_STATUS UpdateInt15MxmSISData ( + IN EFI_LEGACY_BIOS_PROTOCOL *LegacyBiosProtocol +); + +//////////////////////////////// +// Nbci EFI PROTOCOL FUNCTIONS // +//////////////////////////////// + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NbciReturnSpecLevel +// +// Description: Caller provides pointer to location, which on call contains the Module requested Spec Revision +// Level, and which on exit, will contain the Platform's preferred Revision Level and Bit Field of +// supported functions. +// +// Input: +// CHAR8 *pucRevisionLevel +// UINTN *puSupportFuncs +// +// Output: EFI_STATUS = +// EFI_SUCCESS, EFI_UNSUPPORTED, EFI_INVALID_PARAMETER, EFI_BUFFER_TOO_SMALL +// +// Modified: +// +// Referrals: +// +// Notes: +// Where the integer value passed in uSupportFuncs indicates supported functions: +// Bit 0 = `1' (this method is required) +// Bit 1 = `1' (NbciReturnStucture is also required) +// Bit 2 = `1' if NbciSelectOutputDevice is supported, `0' if not +// Bit 3 = `1' if NbciCheckOutputDevice is supported, `0' if not +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NbciReturnSpecLevel ( + IN NBCI_EFI_PROTOCOL *This, + IN OUT CHAR8 *pucRevisionLevel, + OUT UINTN *puSupportFuncs +){ + EFI_STATUS Status = EFI_SUCCESS; + + *pucRevisionLevel = EFI_NBCI_DataBlockID; + *puSupportFuncs = EFI_NBCI_SupportFuncs; + + return Status; +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NbciReturnStructure +// +// Description: Caller provides expected Nbci Interface Revision Level and a pointer which, +// on return will contain the Nbci structure. +// +// Input: UINT8 *This +// EFI_HANDLE ControllerHandle +// UCHAR16 usStructSize +// +// Output: EFI_STATUS = +// EFI_SUCCESS, EFI_UNSUPPORTED, EFI_INVALID_PARAMETER, EFI_BUFFER_TOO_SMALL +// +// Modified: +// +// Referrals: +// +// Notes: +// ControllerHandle - used to differentiate which Nbci module is being referenced. +// This is the EFI handle for the PCI device. ChildHandle where used, is the output device (the display). +// usStructSize - set to the size of the supplied buffer by the caller, and on return should contain the +// actual size of the structure. If the structure is larger than the buffer, EFI_BUFFER_TOO_SMALL +// should be returned as the status of the call +// usDataBlockID - Identifier for the data block to return. To obtain the Nbci information structure, use usDataBlockID[0..7] to specify the revision +// of the Nbci software specification that is supported by the Nbci module.Format is binary coded decimal, for example: 0030h = 3.0, etc. +// To obtain an additional vendor specific data block, use lower 8 bits to specify an identifier in the range 0x80-0x8F. +// If the system BIOS does not contain Nbci Graphics Module Software Specification Version 3.0 such a data block, it should return an error. +// Graphics vendors should not assume a specific assignment within this range - the SBIOS can store +// the data for different vendors in any order in the 0x80-0x8F identifier range +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NbciReturnStructure ( + IN NBCI_EFI_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN OUT CHAR16 *usStructSize, + IN CHAR16 usDataBlockID, + OUT CHAR8 **pNbciStruct +){ + EFI_STATUS Status = EFI_SUCCESS; +// Only supports Rev 3.0 + if(usDataBlockID != EFI_NBCI_DataBlockID) + return EFI_UNSUPPORTED; + + UpdateInt15MxmSISData(This); + +// TO DO: calculate the offset within *pNbciStruct by comparing the DevID in the Nbci Header with given controller handle DevID + *pNbciStruct = (CHAR8*)gMxmLegMemAddr; + *usStructSize = (CHAR16)gMxmLegMemSize; + + return Status; +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NbciSelectOutputDevice +// +// Description: Select Output Device Channel. +// Caller provides the handle of the target adapter, the handle of the display and the output setting +// +// Input: UINT8 *This +// EFI_HANDLE ControllerHandle +// UCHAR16 usStructSize +// +// Output: EFI_STATUS = +// EFI_SUCCESS, EFI_UNSUPPORTED, EFI_INVALID_PARAMETER, EFI_BUFFER_TOO_SMALL +// +// Modified: +// +// Referrals: +// +// Notes: +// Where the value passed in ucOutputSetting may indicate one of the following actions: +// 0 - Acquire shared Display DDC +// 1 - Enable this Display Output +// 3 - Enable this Display - Both Output and DDC +// 4 - Release shared Display DDC +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NbciSelectOutputDevice ( + IN NBCI_EFI_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN OUT CHAR16 usStructSize, + IN EFI_HANDLE ChildHandle, + IN CHAR8 ucOutputSetting +){ + + return EFI_UNSUPPORTED; +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NbciCheckOutputDevice +// +// Description: Check Availability of Output Device. Caller provides the handle of +// the target adapter and the handle of the display +// +// Input: UINT8 *This +// EFI_HANDLE ControllerHandle +// UCHAR16 usStructSize +// +// Output: EFI_STATUS = +// EFI_SUCCESS, EFI_UNSUPPORTED, EFI_INVALID_PARAMETER, EFI_BUFFER_TOO_SMALL +// UCHAR8 ucDisplayAvailable +// +// Modified: +// +// Referrals: +// +// Notes: The returned value ucDisplayAvailable will be one of the following values: +// 0 - Connector is currently available +// 1 - Connector is not currently available +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NbciCheckOutputDevice ( + IN NBCI_EFI_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN OUT CHAR16 usStructSize, + IN EFI_HANDLE ChildHandle, + OUT CHAR8 ucDisplayAvailable +){ + + return EFI_UNSUPPORTED; +} + +/////////////////////////////////////// +// END of Nbci EFI PROTOCOL FUNCTIONS // +/////////////////////////////////////// + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NBCIInterfaces +// +// Description: Common entry point to install: +// 1. Install Nbci protocol; +// +// Input: EFI_HANDLE ImageHandle +// +// Output: EFI_STATUS +// +// Modified: +// +// Referrals: +// +// Notes: +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS +NBCIInterfaces ( + IN EFI_HANDLE ImageHandle +) +{ + EFI_STATUS Status; + EFI_GUID gEfiNBCIProtocolGuid = NBCI_EFI_GUID; + +// Install NBCI_EFI_PROTOCOL + Status = pBS->InstallProtocolInterface ( + &ImageHandle, + &gEfiNbciProtocolGuid, + EFI_NATIVE_INTERFACE, + &NBCIProtocol + ); + ASSERT_EFI_ERROR (Status); + + return Status; +} + + +//********************************************************************** +//********************************************************************** +//** ** +//** (C)Copyright 1985-2012, American Megatrends, Inc. ** +//** ** +//** All Rights Reserved. ** +//** ** +//** 5555 Oakbrook Pkwy, Suite 200, Norcross, GA 30093 ** +//** ** +//** Phone: (770)-246-8600 ** +//** ** +//********************************************************************** +//********************************************************************** |