diff options
Diffstat (limited to 'Board/IO/F81866/F81866DXE.C')
| -rw-r--r-- | Board/IO/F81866/F81866DXE.C | 78 |
1 files changed, 39 insertions, 39 deletions
diff --git a/Board/IO/F81866/F81866DXE.C b/Board/IO/F81866/F81866DXE.C index 269cbb1..28cdf35 100644 --- a/Board/IO/F81866/F81866DXE.C +++ b/Board/IO/F81866/F81866DXE.C @@ -627,10 +627,10 @@ static EFI_STATUS COM_Init( switch (InitStep) { case isGetSetupData: - if((!dev->DeviceInfo->Implemented) || (!dev->NvData.DevEnable)) { - LoopCspIoDecodeListInit(NULL,AmiSio); - ClearDevResource(dev); - } +// if((!dev->DeviceInfo->Implemented) || (!dev->NvData.DevEnable)) { +// LoopCspIoDecodeListInit(NULL,AmiSio); +// ClearDevResource(dev); +// } break; case isPrsSelect: @@ -638,45 +638,45 @@ static EFI_STATUS COM_Init( case isBeforeActivate: - //Only decode UART1/UART2. More others UART port is decode in PEI - //Attention! Remove the more com ports to PEI decode. - if(dev->DeviceInfo->UID <= 0x02) - LoopCspIoDecodeListInit(PciIo,AmiSio); +// //Only decode UART1/UART2. More others UART port is decode in PEI +// //Attention! Remove the more com ports to PEI decode. +// if(dev->DeviceInfo->UID <= 0x02) +// LoopCspIoDecodeListInit(PciIo,AmiSio); //Programm Device Mode register here(if NEEDED)use AmiSioProtocol - if(DXE_COM_Mode_Init_Table[dev->DeviceInfo->UID].AndData8 == 0xFF) { - rv=DXE_COM_Mode_Init_Table[dev->DeviceInfo->UID].OrData8; - } else { - Status=AmiSio->Access(AmiSio, FALSE, FALSE, 0xF0, &rv); - ASSERT_EFI_ERROR(Status); - rv &= DXE_COM_Mode_Init_Table[dev->DeviceInfo->UID].AndData8; - rv |= DXE_COM_Mode_Init_Table[dev->DeviceInfo->UID].OrData8; - } - Status=AmiSio->Access(AmiSio,TRUE,FALSE,0xF0,&rv); +// if(DXE_COM_Mode_Init_Table[dev->DeviceInfo->UID].AndData8 == 0xFF) { +// rv=DXE_COM_Mode_Init_Table[dev->DeviceInfo->UID].OrData8; +// } else { +// Status=AmiSio->Access(AmiSio, FALSE, FALSE, 0xF0, &rv); +// ASSERT_EFI_ERROR(Status); +// rv &= DXE_COM_Mode_Init_Table[dev->DeviceInfo->UID].AndData8; +// rv |= DXE_COM_Mode_Init_Table[dev->DeviceInfo->UID].OrData8; +// } +// Status=AmiSio->Access(AmiSio,TRUE,FALSE,0xF0,&rv); //AMI_TODO: You can program device mode as follow: - if(dev->DeviceInfo->UID == 0x05) { - Status=AmiSio->Access(AmiSio,FALSE,FALSE,0xF1,&rv); - ASSERT_EFI_ERROR(Status); - if(EFI_ERROR(Status))return Status; - //clear Bit4~3 where COM Port mode is: - rv &= 0xE7; - switch (dev->NvData.DevMode) { - case 0: - rv |= 0x00; //Bit4~3 = 000, Disable IR1 function - break; - case 1: - rv |= 0x10; //Bit4~3 = 010, Enable IR1 function, active pulse is 1.6uS - break; - case 2: - rv |= 0x18; //Bit4~3 = 011, Enable IR1 function, active pulse is 3/16 bit time - break; - default: return EFI_INVALID_PARAMETER; - } - Status=AmiSio->Access(AmiSio,TRUE,FALSE,0xF1,&rv); - ASSERT_EFI_ERROR(Status); - } +// if(dev->DeviceInfo->UID == 0x05) { +// Status=AmiSio->Access(AmiSio,FALSE,FALSE,0xF1,&rv); +// ASSERT_EFI_ERROR(Status); +// if(EFI_ERROR(Status))return Status; +// //clear Bit4~3 where COM Port mode is: +// rv &= 0xE7; +// switch (dev->NvData.DevMode) { +// case 0: +// rv |= 0x00; //Bit4~3 = 000, Disable IR1 function +// break; +// case 1: +// rv |= 0x10; //Bit4~3 = 010, Enable IR1 function, active pulse is 1.6uS +// break; +// case 2: +// rv |= 0x18; //Bit4~3 = 011, Enable IR1 function, active pulse is 3/16 bit time +// break; +// default: return EFI_INVALID_PARAMETER; +// } +// Status=AmiSio->Access(AmiSio,TRUE,FALSE,0xF1,&rv); +// ASSERT_EFI_ERROR(Status); +// } //Programm Serial_X IRQ Share register. if((dev->DeviceInfo->Flags & SIO_SHR_IRQ1) && dev->ResOwner) { @@ -878,7 +878,7 @@ static EFI_STATUS KBC_Init( break; case isBeforeActivate: - LoopCspIoDecodeListInit(PciIo,AmiSio); // Enable IODecode +// LoopCspIoDecodeListInit(PciIo,AmiSio); // Enable IODecode break; default: Status=EFI_INVALID_PARAMETER; |