diff options
Diffstat (limited to 'CRB/CSP.sdl')
| -rw-r--r-- | CRB/CSP.sdl | 625 |
1 files changed, 625 insertions, 0 deletions
diff --git a/CRB/CSP.sdl b/CRB/CSP.sdl index c43782f..bcbe442 100644 --- a/CRB/CSP.sdl +++ b/CRB/CSP.sdl @@ -661,3 +661,628 @@ TOKEN TokenType = Boolean TargetH = Yes End +## Program PCH GPIO +TOKEN + Name = "PROGRAM_GPIO_TYPE" + Value = "1" + Help = "0:use array directly/1:use token define" + TokenType = Boolean + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_000" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_001" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_002" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_003" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_004" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_005" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_006" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_007" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_008" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_009" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_010" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_011" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_012" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_013" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_014" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_015" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_016" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_017" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_018" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_019" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_020" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_021" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_022" ## LAN1_DISABLE# + Value = "$(GPO_HIGH)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_023" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_024" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_025" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_026" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_027" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_028" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_029" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_030" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_031" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_032" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_033" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_034" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_035" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_036" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_037" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_038" ## LAN2_DISABLE# + Value = "$(GPO_HIGH)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_039" ## BOARD_ID + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_040" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_041" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_042" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_043" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_044" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_045" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_046" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_048" ## BOARD_ID + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_049" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_050" ## Connected to TPM Header + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_051" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_052" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_053" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_054" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_055" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_057" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_058" ## SML1CLK + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_059" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_060" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_061" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_062" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_063" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_064" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_065" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_066" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_067" + Value = "$(IS_NOT_GPIO)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_068" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_069" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_070" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_071" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_072" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_073" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_074" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End +TOKEN + Name = "GPIO_075" + Value = "$(IS_GPIO)+$(IS_GPI)" + Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED" + TokenType = Integer + TargetEQU = Yes + TargetH = Yes +End + +## Board\IO\F81866\IO_F81866.SDL +TOKEN + Name = "BOARD_LABEL_BELOW_25" + Value = "0" + Help = "Enable(Core<=4.6.4.0)/Disable(Core > 4.6.4.0 have defined AMI_CALLBACK_VARSTORE)" + TokenType = Boolean + TargetMAK = Yes + TargetH = Yes +End +TOKEN + Name = "F81866_FLOPPY_PORT_PRESENT" + Value = "0" + Help = "Floppy Port Present / Not Present." + TokenType = Boolean + TargetH = Yes +End +TOKEN + Name = "F81866_PARALLEL_PORT_PRESENT" + Value = "0" + Help = "LPT Port Present / Not Present." + TokenType = Boolean + TargetH = Yes +End |