diff options
Diffstat (limited to 'EDK/MiniSetup/TseLite/numeric.c')
| -rw-r--r-- | EDK/MiniSetup/TseLite/numeric.c | 1430 |
1 files changed, 1430 insertions, 0 deletions
diff --git a/EDK/MiniSetup/TseLite/numeric.c b/EDK/MiniSetup/TseLite/numeric.c new file mode 100644 index 0000000..4526b03 --- /dev/null +++ b/EDK/MiniSetup/TseLite/numeric.c @@ -0,0 +1,1430 @@ +//*****************************************************************// +//*****************************************************************// +//*****************************************************************// +//** **// +//** (C)Copyright 2014, American Megatrends, Inc. **// +//** **// +//** All Rights Reserved. **// +//** **// +//** 5555 Oakbrook Pkwy, Building 200,Norcross, Georgia 30093 **// +//** **// +//** Phone (770)-246-8600 **// +//** **// +//*****************************************************************// +//*****************************************************************// +//*****************************************************************// +// $Archive: /Alaska/SOURCE/Modules/AMITSE2_0/AMITSE/TseLite/numeric.c $ +// +// $Author: Premkumara $ +// +// $Revision: 38 $ +// +// $Date: 8/28/14 3:06p $ +// +//*****************************************************************// +//*****************************************************************// +// Revision History +// ---------------- +// $Log: /Alaska/SOURCE/Modules/AMITSE2_0/AMITSE/TseLite/numeric.c $ +// +// 38 8/28/14 3:06p Premkumara +// [TAG] EIP141986 +// [Category] Improvement +// [Description] Make grayedout control focusable and this feature is +// handled by token TSE_SETUP_GRAYOUT_SELECTABLE +// [Files] AMITSE.sdl, CommonHelper.c, Frame.c, Label.c, Minisetupext.c, +// Numeric.c, PopupPassword.c, PopupSel.c, PopupString. SubMenu.c +// +// 37 5/03/14 8:04p Premkumara +// [TAG] EIP139608 +// [Category] Bug Fix +// [Severity:] Important +// [Symptom:] Not able to navigate to other page using Mouse/Clicks when +// Numeric control is focused. Msgbox, Menu, Listbox is not closing using +// touch/mouse. +// [Root Cause] When token SINGLE_CLICK_ACTIVATION is enabled +// numerichandle action is not returning unsupported. TSE isn't handled +// ControlActionSelect to close msgbox, menu, listbox when token is +// enable. +// [Solution] Handled mouse action properly for numeric control. Handled +// action properly to close msgbox, listbox, menu. +// [Files] ListBox.c, Numeic.c, MessageBox.c, MinisetupExt.c +// +// 36 5/03/14 3:17p Premkumara +// [TAG] EIP139608 +// [Category] Bug Fix +// [Severity:] Important +// [Symptom:] Not able to navigate to other page using Mouse/Clicks when +// Numeric control is focused. Msgbox, Menu, Listbox is not closing using +// touch/mouse. +// [Root Cause] When token SINGLE_CLICK_ACTIVATION is enabled +// numerichandle action is not returning unsupported. TSE isn't handled +// ControlActionSelect to close msgbox, menu, listbox when token is +// enable. +// [Solution] Handled mouse action properly for numeric control. Handled +// action properly to close msgbox, listbox, menu. +// [Files] ListBox.c, Numeic.c, MessageBox.c, MinisetupExt.c +// +// 35 5/02/14 9:33p Arunsb +// EIP141986 changes reverted. +// +// 34 5/02/14 10:58a Premkumara +// [TAG] EIP141986 +// [Category] New Feature +// [Description] Made Grayed controls to focus-able when token +// TSE_SETUP_GRAYOUT_SELECTABLE +// is enabled and can't edit the values +// [Files] AMITSE.sdl,CommonHelper.c,frame.c,Label.c,minisetupext.h, +// numeric.c,PopupPassword.c,PopupSel.c,PopupString.c,SubMenu.c +// +// 33 5/01/14 3:43p Premkumara +// [TAG] EIP123727 +// [Category] Bug Fix +// [Severity] Normal +// [Symptom] Enabling Multiline and in Boot option priorities, Clicking +// on second or third line of the boot item is not selecting boot options +// menu +// [RootCause] Proper Condition was not there to check whether Mouse +// Click +// is within the Width and Height of Control or not. +// [Solution] Added Proper Condition to check whether Mouse Click +// is within the Width and Height of Control or not. +// [Files] Date.c, time.c, frame.c, SubMenu.c, numeric.c, +// PopupString.c, PopupSel.c, ordlistbox.c, PopupPassword.c, UefiAction.c, +// +// 32 2/11/14 9:02p Arunsb +// Changes reverted for 2.16.1243 label +// +// 31 12/05/13 1:37a Premkumara +// [TAG] EIP139608 +// [Category] Bug Fix +// [Severity:] Important +// [Symptom:] Not able to navigate to other page using Mouse/Clicks when +// Numeric control is focused. Msgbox, Menu, Listbox is not closing using +// touch/mouse. +// [Root Cause] When token SINGLE_CLICK_ACTIVATION is enabled +// numerichandle action is not returning unsupported. TSE isn't handled +// ControlActionSelect to close msgbox, menu, listbox when token is +// enable. +// [Solution] Handled mouse action properly for numeric control. Handled +// action properly to close msgbox, listbox, menu. +// [Files] ListBox.c, Numeic.c, MessageBox.c, MinisetupExt.c +// +// 30 12/03/13 1:10p Premkumara +// [TAG] EIP141986 +// [Category] Improvement +// [Description] Make grayedout control focusable and this feature is +// handled by token TSE_SETUP_GRAYOUT_SELECTABLE +// [Files] AMITSE.sdl, CommonHelper.c, Frame.c, Label.c, Minisetupext.c, +// Numeric.c, PopupPassword.c, PopupSel.c, PopupString. SubMenu.c +// +// 29 10/18/12 6:02a Arunsb +// Updated for 2.16.1235 QA submission +// +// 13 10/10/12 12:38p Arunsb +// Synched the source for v2.16.1232, backup with Aptio +// +// 28 6/28/12 8:23p Arunsb +// [TAG] EIP92407 +// [Category] Bug Fix +// [Severity] Normal +// [Symptom] Shift + "+" key wont respond +// [RootCause] Shift state not cleared +// [Solution] Shift state cleared +// [Files] numeric.c +// +// 27 5/29/12 2:41a Premkumara +// Added missed EIP-88811 changes (TSEMouseIgnoreMouseActionHook()) in +// numeric.c +// +// 26 5/28/12 11:52a Premkumara +// [TAG] EIP89272 +// [Category] Improvement +// [Description] Change softkbd layout for numeric control +// [Files] CommonHelper.c, Mouse.c, Minisetup.h, C, Numeric.c +// +// 25 5/28/12 8:27a Arunsb +// CallbackShowMessageBox commented in NumericDraw +// +// 24 5/24/12 7:30a Rajashakerg +// [TAG] EIP88811 +// [Category] Bug Fix +// [Severity] Normal +// [Symptom] When pop-up window is invoked in setup and Click on ESC +// icon or ESC/Right Click, it will respond as two times ESC is clicked +// [RootCause] ESC functionality provided for left click on the ESC +// sting navigation frame . +// [Solution] Now providing the ESC sequence for left down and double +// click +// [Files] ezport.c, numeric.c, MessageBox.c +// +// 23 5/09/12 6:23p Premkumara +// [TAG] EIP83703 +// [Category] Bug Fix +// [Severity] Important +// [Symptom] TSE hangs while clicking on the "link training time out" +// value [this is happening while trying the specified steps immediate +// after bios flash +// [RootCause] When invalid range input is provided for numeric control +// ESC sequence is not provided if it is handled by the mouse. +// [Solution] Provided the proper ESC sequence to the control such that +// it close the Invalid Range Fail MsgBox when handled with the mouse and +// key. +// [Files] Numeric.c, CommonHelper.c +// +// $/Alaska/SOURCE/Modules/AMITSE2_0/AMITSE/TseLite/ +// - numeric.c (ver 22) +// +// $/Alaska/BIN/Modules/AMITSE2_0/AMITSE/ +// - CommonHelper.c (ver 88) +// +// 22 5/09/12 5:04p Premkumara +// [TAG] EIP83703 +// [Category] Bug Fix +// [Severity] Important +// [Symptom] TSE hangs while clicking on the "link training time out" +// value [this is happening while trying the specified steps immediate +// after bios flash +// [RootCause] When invalid range input is provided for numeric control +// ESC sequence is not provided if it is handled by the mouse. +// [Solution] Provided the proper ESC sequence to the control such that +// it close the Invalid Range Fail MsgBox when handled with the mouse and +// key. +// [Files] Numeric.c, CommonHelper.c +// +// 21 4/05/12 7:17a Rajashakerg +// [TAG] EIP87122,85508,86449 +// [Category] Improvement +// [Description] Numeric in old style, softkbd issues +// [Files] CommonHelper.c, Mouse.c, Date.c, edit.c, frame.c, +// minisetupext.h, numeric.c, numeric.h, PopupEdit.c, PopupEdit.h, time.c +// +// 20 4/03/12 11:57p Rajashakerg +// [TAG] EIP83703 +// [Category] Bug Fix +// [Severity] Normal +// [Symptom] TSE hangs while clicking on the "link training time out" +// value [this is happening while trying the specified steps immediate +// after bios flash] +// [RootCause] Invalid message box handling with in the numeric is not +// proper which is cauing the hang. +// [Solution] Invalid message box is handled propely with mouse +// selection. +// [Files] numeric.c +// +// 19 12/08/11 12:28p Rajashakerg +// Updated the file to overcome build errors when build for x32 mode. +// +// 18 11/21/11 11:23a Premkumara +// [TAG] EIP72610 +// [Category] Improvement +// [Description] Moving TSE_MULTILINE_CONTROLS to Binary +// [Files] AMITSE-CommonHelper.c, AMITSE.sdl, +// TSELITE-UefiAction.c, TseLite.sdl, Time.h, Text.c, +// SubMenu.c, ResetButton.c, PopupString.c, PopupSel.h, PopupSel.c, +// PopupPassword.c, OrderListBox.c, Numeric.c, Label.c, Frame.c, Edit.c, +// Date.h, Date.c, +// LEGACY-Legacy.c, +// BOOTONLY- Minisetup.h +// +// 17 11/21/11 12:23a Rajashakerg +// [TAG] EIP62763 +// [Category] Improvement +// [Description] Utilize the Improvements done from mouse driver in +// AMITSE. +// [Files] HookAnchor.h, TseCommon.h, AMITSE.sdl, CommonHelper.c, +// commonoem.c, commonoem.h, buffer.c, globals.c, HookAnchor.c, +// minisetup.h, notify.c, postmgmt.c, protocol.c, ezport.c, stylecommon.c, +// Mouse.c, Action.c, Date.c, frame.c, MessageBox.c, minisetupext.c, +// minisetupext.h, numeric.c, numeric.h, page.c, PopupEdit.c, PopupEdit.h, +// PopupPassword.c, postmgmtext.c, time.c. +// +// 16 11/20/11 8:01a Rajashakerg +// [TAG] EIP62763 +// [Category] Improvement +// [Description] Utilize the Improvements done from mouse driver in +// AMITSE +// [Files] HookAnchor.h, TseCommon.h, AMITSE.sdl, CommonHelper.c, +// commonoem.c, commonoem.h, buffer.c, globals.c, HookAnchor.c, +// minisetup.h, notify.c, postmgmt.c, protocol.c, ezport.c, stylecommon.c, +// Mouse.c, Action.c, Date.c, frame.c, MessageBox.c, minisetupext.c, +// minisetupext.h, numeric.c, numeric.h, page.c, PopupEdit.c, PopupEdit.h, +// PopupPassword.c, postmgmtext.c, time.c. +// +// 15 11/14/11 6:55p Blaines +// [TAG] - EIP 75486 +// [Category]- Function Request +// [Synopsis]- Support grayout condition for readonly controls. +// [Description] - Display readonly controls as grayout, non-selectable. +// [Files] +// AMITSE.sdl, CommonHelper.c, Minisetupext.h, stylecommon.c, Legacy.c, +// date.c, edit.c, label.c, memo.c, menu.c,, numeric.c, ordlistbox.c, +// PopupPassword.c, +// PopupSel.c, PopupString.c, ResetButton.c, SubMenu.c, Text.c, Time.c, +// UefiAction.c, ctrlcond.c, +// +// 14 10/21/11 2:54a Rajashakerg +// [TAG] EIP60563 +// [Category] New Feature +// [Description] Updating the file with fix for issue : maximum 8 byte +// value shows negative number +// [Files] numeric.c, numeric.h, string.c, string.h +// +// 13 10/10/11 1:32a Arunsb +// [TAG] EIP66976 +// [Category] Improvement +// [Description] Provision to change the Numeric string format +// [Files] commonhelper.c, amitse.sdl and numeric.c +// +// 12 6/23/11 3:54p Rajashakerg +// [TAG] EIP55762, 58925, 59971 +// [Category] New Feature +// [Description] +// Support REF2,REF3 and REF4 in AMITSE +// Support direct form navigation path +// Improper layout of controls in the root page when Dynamic pages are +// added using the Legacy Setup Style +// +// [Files] setupdata.h, CommonHelper.c, AMITSE.sdl, Legacy\Legacy.c, +// Legacy\style.h, Legacy\style.h, frame.c, minisetupext.c, +// minisetupext.h, numeric.c, page.c Popupstring.c, Hii.c, +// Uefi21Wrapper.c, Parse.c Hii.c +// +// 11 6/20/11 12:22p Rajashakerg +// [TAG] EIP60563 +// [Category] New Feature +// [Description] Support for signed decimal value for +// EFI_IFR_NUMERIC_OP. +// [Files] numeric.c, numeric.h, string.c, string.h, Uefi21Wapper.c +// +// 10 6/07/11 2:44p Madhans +// [TAG] EIP61897 +// [Category] Improvement +// [Description] To ignore the limit checking for the Suppressed +// Controls in TSE +// [Files] numeric.c +// +// 9 3/21/11 12:39a Rajashakerg +// [TAG] EIP53480 +// [Category] Improvement +// [Description] FormBrowser extended actions support +// [Files] callback.c, minisetupext.c, minisetupext.h, numeric.c, +// PopupSel.c, PopupString.c, SubMenu.c, TseLiteCommon.c, UefiAction.c, +// Hiicallback.c, TseUefiHii.h, Uefi21Wapper.c, HiiCallback.c +// +// 8 3/09/11 7:23p Madhans +// [TAG] EIP48615 +// [Category] Improvement +// [Description] To support UEFI 2.1 RefreshOp. Based in Refersh Rate +// Controls are refershed periodically. +// [Files] minisetupext.h +// SubMenu.h +// SubMenu.c +// Memo.c +// Memo.h +// numeric.c +// numeric.h +// time.c +// Date.c +// PopupSel.c +// PopupSel.h +// PopupString.c +// PopupString.h +// ordlistbox.c +// minisetupext.c +// UefiAction.c +// hii.h +// Uefi20wapper.c +// hiicallback.c +// Parse.c +// tseuefihii.h +// Uefi21wapper.c +// +// 7 12/02/10 6:08p Madhans +// [TAG] - EIP49562 +// [Category]- Improvment. +// [Severity]- Mordarate +// [Symptom]- Need to support UEFI 2.2 requirements related to Calling +// Formcallback with +// EFI_BROWSER_ACTION_CHANGING and EFI_BROWSER_ACTION_CHANGED action. +// [Solution]- Implemented the support. +// [Files] - submenu.c, numeric.c, popupsel.c, popupString.c, +// uefi20\hii.h, uefi20\uefi20wrapper.c +// uefi21\hiicalback.c, uefi21\tseuefihii.h +// +// 6 6/17/10 2:59p Madhans +// Dynamic parsing support in TSE. +// +// 5 4/16/10 5:13p Madhans +// Changes for Tse 2.02. Please see Changelog.log for more details. +// +// 4 2/19/10 1:04p Madhans +// Updated for TSE 2.01. Refer Changelog.log for File change history. +// +// 6 2/19/10 8:18a Mallikarjunanv +// updated year in copyright message +// +// 5 1/09/10 6:45a Mallikarjunanv +// Updated TSE2.01 Release sources with coding standards +// +// 4 9/15/09 3:54p Madhans +// // EIP: 26473 Fix To support uppercase Hex numbers +// +// 3 6/23/09 6:52p Blaines +// Coding standard update, +// Remove spaces from file header to allow proper chm function list +// creation. +// +// 2 6/12/09 7:44p Presannar +// Initial implementation of coding standards for AMITSE2.0 +// +// 1 6/04/09 8:05p Madhans +// +// 2 4/29/09 9:02p Madhans +// Bug Fixes after unit Testing.. +// +// 1 4/28/09 11:05p Madhans +// Tse 2.0 Code complete Checkin. +// +// 3 4/28/09 9:40p Madhans +// Tse 2.0 Code complete Checkin. +// +// 2 1/30/09 6:06p Madhans +// Function headers added. +// +// 1 12/18/08 7:58p Madhans +// Intial version of TSE Lite sources +//*****************************************************************// +//*****************************************************************// + +//<AMI_FHDR_START> +//---------------------------------------------------------------------------- +// +// Name: numeric.c +// +// Description: This file contains code to handle Label operations +// +//---------------------------------------------------------------------------- +//<AMI_FHDR_END> + +#include "minisetup.h" + +NUMERIC_METHODS gNumeric = +{ + NumericCreate, + NumericDestroy, + NumericInitialize, + NumericDraw, + NumericHandleAction, + NumericSetCallback, + NumericSetFocus, + NumericSetPosition, + NumericSetDimensions, + NumericSetAttributes, + NumericGetControlHeight +}; +BOOLEAN SingleClickActivation (VOID); //EIP-139608 +extern UINTN gInvalidRangeFailMsgBox; +static BOOLEAN NumericIncDec = TRUE; +BOOLEAN CheckKeyinHotKeysList(AMI_EFI_KEY_DATA Key); +EFI_STATUS NumericHandleActionKeyMouse(NUMERIC_DATA *numeric, ACTION_DATA *Data); +VOID NumSPrint(NUMERIC_DATA *numeric,NUMERIC_MIN_MAX_BASE Num); +VOID UpdateNumericDisplayString (CHAR16 **, INT64, UINT8, UINT16, UINT16); +VOID ClearNumericShiftState (AMI_EFI_KEY_DATA *);//EIP-83703 + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericCreate +// +// Description: function used for Numeric control Create, which uses the Edit functions. +// +// Input: NUMERIC_DATA **object +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericCreate( NUMERIC_DATA **object ) +{ + EFI_STATUS Status = EFI_OUT_OF_RESOURCES; + + if ( *object == NULL ) + { + *object = EfiLibAllocateZeroPool( sizeof(NUMERIC_DATA) ); + + if ( *object == NULL ) + return Status; + } + + Status = gEdit.Create( object ); + if ( ! EFI_ERROR(Status) ) + (*object)->Methods = &gNumeric; + + return Status; +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericDestroy +// +// Description: function used to destroy Numeric controls, which uses the Edit functions. +// +// Input: NUMERIC_DATA **object, BOOLEAN freeMem +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericDestroy( NUMERIC_DATA *numeric, BOOLEAN freeMem ) +{ + if(NULL == numeric ) + return EFI_SUCCESS; + + gEdit.Destroy( numeric, FALSE ); + + MemFreePointer( (VOID **)&numeric->Text ); + + if( freeMem ) + MemFreePointer( (VOID **)&numeric ); + + return EFI_SUCCESS; +} + +//EIP:60563 to support signed integers for NUMERIC opcode +//EIP:60563 START +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: CheckForRange +// +// Description: function used to check the range for the negative numbers and positive nubmers. +// +// Input: NUMERIC_DATA *numeric, NUMERIC_VALUE_BASE *Num +// +// Output: BOOLEAN +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +BOOLEAN CheckForRange(NUMERIC_DATA *numeric, NUMERIC_VALUE_BASE *Num) +{ + if(numeric->Base == 32) + { + if(numeric->ControlData.ControlDataWidth == 1) + { + if(((INT8)*Num < (INT8)numeric->MinValue) ||((INT8)*Num > (INT8)numeric->MaxValue)) + return TRUE; + } + else if(numeric->ControlData.ControlDataWidth == 2) + { + if(((INT16)*Num < (INT16)numeric->MinValue) ||((INT16)*Num > (INT16)numeric->MaxValue)) + return TRUE; + } + else if(numeric->ControlData.ControlDataWidth == 4) + { + if(((INT32)*Num < (INT32)numeric->MinValue) ||((INT32)*Num > (INT32)numeric->MaxValue)) + return TRUE; + } + else if(numeric->ControlData.ControlDataWidth == 8) + { + if(((INT64)*Num < (INT64)numeric->MinValue) ||((INT64)*Num > (INT64)numeric->MaxValue)) + return TRUE; + } + else + return FALSE; + } + else + { + if(((*Num) < numeric->MinValue) ||(*Num > numeric->MaxValue)) + return TRUE; + else + return FALSE; + } +return FALSE; + +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: CheckForRangefromsetup +// +// Description: function used to check the range for the negative numbers and positive nubmers from setup. +// +// Input: NUMERIC_DATA *numeric, NUMERIC_VALUE_BASE *Num +// +// Output: BOOLEAN +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +BOOLEAN CheckForRangefromsetup(NUMERIC_DATA *numeric, NUMERIC_VALUE_BASE *Num) +{ + if(numeric->Base == 32) + { + if(numeric->ControlData.ControlDataWidth == 1) + { + if(((INT8)*Num >= (INT8)numeric->MinValue) &&((INT8)*Num <= (INT8)numeric->MaxValue)) + return TRUE; + } + else if(numeric->ControlData.ControlDataWidth == 2) + { + if(((INT16)*Num >= (INT16)numeric->MinValue) &&((INT16)*Num <= (INT16)numeric->MaxValue)) + return TRUE; + } + else if(numeric->ControlData.ControlDataWidth == 4) + { + if(((INT32)*Num >= (INT32)numeric->MinValue) &&((INT32)*Num <= (INT32)numeric->MaxValue)) + return TRUE; + } + else if(numeric->ControlData.ControlDataWidth == 8) + { + if(((INT64)*Num >= (INT64)numeric->MinValue) &&((INT64)*Num <= (INT64)numeric->MaxValue)) + return TRUE; + } + else + return FALSE; + } + else + { + if(((*Num) >= numeric->MinValue) &&(*Num <= numeric->MaxValue)) + return TRUE; + else + return FALSE; + } + + return FALSE; +} +//EIP:60563 END +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericInitialize +// +// Description: function used to Initialize the Numeric controls, which uses the Edit functions. +// +// Input: NUMERIC_DATA **object, VOID *data +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericInitialize( NUMERIC_DATA *numeric, VOID *data ) +{ + EFI_STATUS Status = EFI_UNSUPPORTED; + NUMERIC_VALUE_BASE *Num; + VOID * ControlPtr = ((CONTROL_INFO *)data)->ControlPtr; + UINT16 Size = UefiGetWidth(ControlPtr); + + // If the size 1 (it can hold upto 3 Decimal data +1 for null, is more then one the size * 3 is ok + numeric->TextWidth = (Size>1)?(3 * (UINT16)Size):4; + + Status = gEdit.Initialize( numeric, data ); + if (EFI_ERROR(Status)) + return Status; + + // add extra initialization here... + //numeric->FGColor = EFI_YELLOW; + //numeric->BGColor = EFI_BACKGROUND_BLUE; + //numeric->TextWidth = numeric->TextAreaWidth; + numeric->Chr = 0x0; + numeric->MinValue = UefiGetMinValue(ControlPtr);//EIP:60563 to support signed integers for NUMERIC opcode + numeric->MaxValue = UefiGetMaxValue(ControlPtr); + numeric->Step = UefiGetStepValue(ControlPtr); + numeric->ControlData.ControlDataWidth = Size; + numeric->Base = UefiGetBaseValue(ControlPtr); // default base decimal number + numeric->Interval = (UINT8)(numeric->ControlData.ControlFlags.ControlRefresh); + + Num = EfiLibAllocateZeroPool( (Size <sizeof(NUMERIC_MIN_MAX_BASE))? sizeof(NUMERIC_MIN_MAX_BASE):Size ); + + if ( Num != NULL ) + { + VarGetValue( numeric->ControlData.ControlVariable, + UefiGetQuestionOffset(ControlPtr), Size, Num ); + + // check that value is in range + //EIP:60563 to support signed integers for NUMERIC opcode + if(CheckForRange( numeric, Num)) + { + // try to use the default + if(numeric->ControlData.ControlDataWidth != 0) + { + VarGetDefaults( numeric->ControlData.ControlVariable, + UefiGetQuestionOffset(ControlPtr), + Size, Num ); + } + } + + if(*Num < numeric->MinValue) + *Num = numeric->MinValue;//revert to minimum value + + if(*Num > numeric->MaxValue) + *Num =numeric->MaxValue;//revert to maximum value + + numeric->Value = *Num; + + MemFreePointer( (VOID **)&Num ); + } + + NumSPrint(numeric,numeric->Value); + + return EFI_SUCCESS; +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericDraw +// +// Description: function used to draw the numeric controls +// +// Input: NUMERIC_DATA **object +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericDraw(NUMERIC_DATA *numeric ) +{ + NUMERIC_MIN_MAX_BASE *Num; + VOID * ControlPtr = numeric->ControlData.ControlPtr; + + if(numeric->ControlActive == TRUE) + return gEdit.Draw( numeric ); + + // check conditional ptr if necessary + //EIP 75486 Support grayout condition for readonly controls + //if( numeric->ControlData.ControlConditionalPtr != 0x0) + //{ + switch( CheckControlCondition( &numeric->ControlData ) ) + { + case COND_NONE: + case COND_GRAYOUT: + break; + default: + return EFI_UNSUPPORTED; + break; + } + //} + + Num = EfiLibAllocateZeroPool((numeric->ControlData.ControlDataWidth<sizeof(NUMERIC_MIN_MAX_BASE))?sizeof(NUMERIC_MIN_MAX_BASE):numeric->ControlData.ControlDataWidth); + + if ( Num != NULL ) + { + VarGetValue( numeric->ControlData.ControlVariable, + UefiGetQuestionOffset(ControlPtr), + numeric->ControlData.ControlDataWidth, Num ); + + // check that value is in range + //EIP:60563 to support signed integers for NUMERIC opcode + if(CheckForRange(numeric, Num)) + { + //Report Message box +// CallbackShowMessageBox( (UINTN)gInvalidRangeFailMsgBox, MSGBOX_TYPE_OK ); + + // try to use the default + if(numeric->ControlData.ControlDataWidth != 0) + { + VarGetDefaults( numeric->ControlData.ControlVariable, + UefiGetQuestionOffset(ControlPtr), + numeric->ControlData.ControlDataWidth, Num ); + } + if(*Num < numeric->MinValue) + *Num = numeric->MinValue;//revert to minimum value + + if(*Num > numeric->MaxValue) + *Num =numeric->MaxValue;//revert to maximum value + } + + numeric->Value = *Num; + + MemFreePointer( (VOID **)&Num ); + } + + NumSPrint(numeric,numeric->Value); +#if 0 + /*To eliminate leading zeroes*/ + Num = atoi( numeric->Text, numeric->Base ); + SPrint( numeric->Text, numeric->TextAreaWidth, L"%d", Num); +#endif + return gEdit.Draw( numeric ); +} +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericSetCallback +// +// Description: function used for setting Numeric control callback. +// +// Input: NUMERIC_DATA *numeric, OBJECT_DATA *container, OBJECT_CALLBACK callback, VOID *cookie +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericSetCallback( NUMERIC_DATA *numeric, OBJECT_DATA *container, OBJECT_CALLBACK callback, VOID *cookie ) +{ + return gEdit.SetCallback( numeric, container, callback, cookie ); +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericHandleAction +// +// Description: function used handle the Numeric controls +// +// Input: NUMERIC_DATA *numeric, ACTION_DATA *Data +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericHandleAction( NUMERIC_DATA *numeric, ACTION_DATA *Data) +{ + EFI_STATUS Status = EFI_UNSUPPORTED; + + + if ( Data->Input.Type == ACTION_TYPE_TIMER ) + { + if(numeric->ControlActive) + return Status; + + if (numeric->Interval == 0) + return Status; + + if(IsActiveControlPresent(gApp->PageList[gApp->CurrentPage])) + return Status; + + if ( --(numeric->Interval) == 0 ) + { + // initialize the interval + numeric->Interval = (UINT8)(numeric->ControlData.ControlFlags.ControlRefresh); + return UefiRefershQuestionValueNvRAM(&(numeric->ControlData)); + } + else + return Status; + } + + if (( Data->Input.Type == ACTION_TYPE_KEY )||(Data->Input.Type == ACTION_TYPE_MOUSE)) + return NumericHandleActionKeyMouse(numeric, Data); + + return Status; +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: CheckforIncrementandDecreament +// +// Description: function used handle the Numeric controls Increment and Decreament operation +// +// Input: NUMERIC_MIN_MAX_BASE *Num, NUMERIC_DATA *numeric, CONTROL_ACTION Action,UINT8 *bValueChanged +// +// Output: VOID +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +VOID CheckforIncrementandDecreament(NUMERIC_MIN_MAX_BASE *Num, NUMERIC_DATA *numeric, CONTROL_ACTION Action,UINT8 *bValueChanged ) +{ + if(ControlActionIncreament == Action) + { + if(AMI_BASE_INT_DEC == numeric->Base) + { + if(numeric->ControlData.ControlDataWidth == 1) + { + if ( ((INT8)*Num + (INT8)numeric->Step) <= (INT8)numeric->MaxValue ) + { + *Num = *Num + (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + } + } + else if(numeric->ControlData.ControlDataWidth == 2) + { + if ( ((INT16)*Num + (INT16)numeric->Step) <= (INT16)numeric->MaxValue ) + { + *Num = *Num + (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + + } + } + else if(numeric->ControlData.ControlDataWidth == 4) + { + if ( ((INT32)*Num + (INT32)numeric->Step) <= (INT32)numeric->MaxValue ) + { + *Num = *Num + (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + + } + } + else + { + if ( ((INT64)*Num + (INT64)numeric->Step) <= (INT64)numeric->MaxValue ) + { + *Num = *Num + (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + + } + } + + } + else + { + if ( *Num + numeric->Step <= numeric->MaxValue ) + { + *Num = *Num + (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + } + } + } + else + { + if(AMI_BASE_INT_DEC == numeric->Base) + { + if(numeric->ControlData.ControlDataWidth == 1) + { + if ( ((INT8)*Num - (INT8)numeric->Step) >= (INT8)numeric->MinValue) + { + *Num = *Num - (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + + } + } + else if(numeric->ControlData.ControlDataWidth == 2) + { + if ( ((INT16)*Num - (INT16)numeric->Step) >= (INT16)numeric->MinValue ) + { + *Num = *Num - (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + + } + } + else if(numeric->ControlData.ControlDataWidth == 4) + { + if ( ((INT32)*Num - (INT32)numeric->Step) >= (INT32)numeric->MinValue) + { + *Num = *Num - (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + + } + } + else + { + if ( ((INT64)*Num - (INT64)numeric->Step) >= (INT64)numeric->MinValue ) + { + *Num = *Num - (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + + } + } + + + } + else + { + if( *Num - numeric->Step >= numeric->MinValue ) + { + *Num = *Num - (NUMERIC_MIN_MAX_BASE)numeric->Step; + *bValueChanged = 1; + } + } + + } + + +} + + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericHandleActionKey +// +// Description: function used handle the Numeric control keys +// +// Input: NUMERIC_DATA *numeric, ACTION_DATA *Data +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericHandleActionKeyMouse(NUMERIC_DATA *numeric, ACTION_DATA *Data) +{ + EFI_STATUS Status = EFI_UNSUPPORTED; + CHAR16 Chr; + BOOLEAN DataOk = FALSE; + NUMERIC_MIN_MAX_BASE Num; + ACTION_DATA TempData; + CONTROL_ACTION Action; + AMI_EFI_KEY_DATA key; + VOID * ControlPtr = numeric->ControlData.ControlPtr; + UINT8 u8ChkResult; + + u8ChkResult = CheckControlCondition( &numeric->ControlData ); + + //Not to perform action for control when token TSE_SETUP_GRAYOUT_SELECTABLE is enable to set focus for GrayoutIf control + if ( IsGrayoutSelectable() && (COND_GRAYOUT == u8ChkResult) ) { + return EFI_UNSUPPORTED; + } + + if(numeric->ControlData.ControlFlags.ControlReadOnly) + return EFI_UNSUPPORTED; + + key = Data->Input.Data.AmiKey; + //Get mapping + if(Data->Input.Type == ACTION_TYPE_KEY) + { + Action = MapControlKeysHook(key); + } + else if(Data->Input.Type == ACTION_TYPE_MOUSE) + { + Action = MapControlMouseActionHook(&Data->Input.Data.MouseInfo); + //EIP-123727 check whether MouseTop is within the Height and Width of Neumeric Control or not + if ( (ControlActionSelect == Action) && + ( (Data->Input.Data.MouseInfo.Top >= (UINT32)numeric->Top) && + (Data->Input.Data.MouseInfo.Top < (UINT32)(numeric->Top+numeric->Height)) && + (Data->Input.Data.MouseInfo.Left >= (UINT32)numeric->Left) && + (Data->Input.Data.MouseInfo.Left < (UINT32)(numeric->Left+numeric->Width)) + )//EIP-139608 when mouse is clicked on numeric control and action is ControlActionSelect + ) + { + Action = ControlActionSelect; + if(!TSEMouseIgnoreMouseActionHook()) + { + if (numeric->Base == AMI_BASE_INT_DEC || numeric->Base == AMI_BASE_DEC) + NumericSoftKbdInit(); + else if (numeric->Base == AMI_BASE_HEX || numeric->Base == AMI_BASE_OCT) + { + PrintableKeysSoftKbdInit(); + } + } + } + //EIP-123727 Close softkbd if activatd when clicked/touch outside numeric + else if ( ((!((Data->Input.Data.MouseInfo.Top >= (UINT32)numeric->Top) && (Data->Input.Data.MouseInfo.Top < (UINT32)(numeric->Top+numeric->Height))&& (Data->Input.Data.MouseInfo.Left >= (UINT32)numeric->Left) && (Data->Input.Data.MouseInfo.Left < (UINT32)(numeric->Left+numeric->Width))))) + &&(TSEMouseIgnoreMouseActionHook())&&(( ControlMouseActionLeftDown== Action)||(ControlMouseActionLeftUp == Action)) + ) + { + if (numeric->Base == AMI_BASE_INT_DEC || numeric->Base == AMI_BASE_DEC) + NumericSoftKbdExit(); + else if (numeric->Base == AMI_BASE_HEX || numeric->Base == AMI_BASE_OCT) + { + PrintableKeysSoftKbdExit(); + } + + gAction.ClearAction( Data ); + return EFI_UNSUPPORTED; + } + + //If mouse clicked outside numeric control area + else if ( ((Data->Input.Data.MouseInfo.Top < (UINT32)numeric->Top) || + (Data->Input.Data.MouseInfo.Top > (UINT32)(numeric->Top+numeric->Height)) || + (Data->Input.Data.MouseInfo.Left < (UINT32)numeric->Left) || + (Data->Input.Data.MouseInfo.Left > (UINT32)(numeric->Left+numeric->Width)) + )&& ( (ControlActionSelect == Action) && SingleClickActivation() ) //EIP-139608 + ) + { + return EFI_UNSUPPORTED; + } + + //If mouse clicked in numeric control area including multi-line string also don't consume mouse action in numeric side. + else if ((Data->Input.Data.MouseInfo.Top >= (UINT32)numeric->Top) && + (Data->Input.Data.MouseInfo.Top < (UINT32)(numeric->Top+numeric->Height)) && + (Data->Input.Data.MouseInfo.Left >= (UINT32)numeric->Left) && + (Data->Input.Data.MouseInfo.Left < (UINT32)(numeric->Left+numeric->Width))&& + (numeric->ControlActive) + ) + { + return EFI_UNSUPPORTED; + } + + } + + switch(Action) + { + case ControlActionSelect: + // check that the data is proper. + if((numeric->Text[0] ==0x0)||((numeric->Base == AMI_BASE_INT_DEC)&&(L'-' == numeric->Text[0])&&( EfiStrStr(numeric->Text+1, L"-")))) + NumSPrint(numeric,numeric->MinValue); + + Num = (NUMERIC_MIN_MAX_BASE)atoi( numeric->Text, numeric->Base ); + + //EIP:60563 to support signed integers for NUMERIC opcode + if ( CheckForRangefromsetup( numeric, &Num) ) + { + if ( ( numeric->Callback != NULL ) && ( numeric->Cookie != NULL ) ) + { + CALLBACK_VARIABLE *callbackData = (CALLBACK_VARIABLE *)numeric->Cookie; + + callbackData->Variable = numeric->ControlData.ControlVariable; + callbackData->Offset = UefiGetQuestionOffset(ControlPtr); + callbackData->Length = UefiGetWidth(ControlPtr); + callbackData->Data = (VOID *)&Num; + // To support UEFI 2.1.C spec to Not to update the control when Callback fails. + UefiPreControlUpdate(&(numeric->ControlData)); + numeric->Callback( numeric->Container,numeric, numeric->Cookie ); + } + + { + if(UefiIsInteractive(&numeric->ControlData)) + { + VOID * Handle=numeric->ControlData.ControlHandle; + UINT16 Key = UefiGetControlKey(&(numeric->ControlData)); + CONTROL_DATA *Control; + + Status = CallFormCallBack(&(numeric->ControlData), Key, 0, AMI_CALLBACK_CONTROL_UPDATE);//EIP-53480: Updated the action to AMI_CALLBACK_CONTROL_UPDATE + Control = GetUpdatedControlData((CONTROL_DATA*)numeric,CONTROL_TYPE_NUMERIC,Handle,Key); + + if(Control == NULL) // Control deleted ? + return EFI_SUCCESS; + if(Control != (CONTROL_DATA*)numeric) + numeric = (NUMERIC_DATA*)Control; //control Updated + + } + } + + Status = EFI_SUCCESS; + numeric->ControlActive = FALSE; + if(((Data->Input.Type == ACTION_TYPE_KEY))&&(TSEMouseIgnoreMouseActionHook() == TRUE)&& (TRUE == NumericIncDec)) + { + if (numeric->Base == AMI_BASE_INT_DEC || numeric->Base == AMI_BASE_DEC) + NumericSoftKbdExit(); + else if (numeric->Base == AMI_BASE_HEX || numeric->Base == AMI_BASE_OCT) + { + PrintableKeysSoftKbdExit(); + } + } + else if(!NumericIncDec) + { + NumericIncDec = TRUE; + } + } + else + { + //Report Message box + CallbackShowMessageBox( (UINTN)gInvalidRangeFailMsgBox, MSGBOX_TYPE_OK ); + Data->Input.Type = ACTION_TYPE_KEY;//EIP 83703 : Providing the input type as key such that it can be consumed in edithandleaction + Data->Input.Data.AmiKey.Key.ScanCode = SCAN_ESC; + Data->Input.Data.AmiKey.Key.UnicodeChar = L'\0'; + ClearNumericShiftState(&(Data->Input.Data.AmiKey));//EIP-83703 + //Data->Input.Data.AmiKey.KeyState.KeyShiftState = 0;//EIP 83703 : providing the key shiftstate + DataOk = TRUE; + } + break; + + case ControlActionBackSpace: + DataOk = TRUE; + break; + + case ControlActionIncreament: + case ControlActionDecreament: + if ( ( numeric->Step != 0 ) && ( ! numeric->ControlActive )) + { + UINT8 bValueChanged = 0; + + Num = (NUMERIC_MIN_MAX_BASE)atoi( numeric->Text, numeric->Base ); + if ( ControlActionIncreament == Action ) + { + if(Num == numeric->MaxValue); + else + CheckforIncrementandDecreament(&Num,numeric,Action,&bValueChanged); + /* if ( Num + numeric->Step <= numeric->MaxValue ) + { + Num = Num + (NUMERIC_MIN_MAX_BASE)numeric->Step; + bValueChanged = 1; + }*/ + } + else if ( ControlActionDecreament == Action ) + { + if(Num == numeric->MinValue); + else + CheckforIncrementandDecreament(&Num,numeric,Action,&bValueChanged); + /* if( Num - numeric->Step >= numeric->MinValue ) + { + Num = Num - (NUMERIC_MIN_MAX_BASE)numeric->Step; + bValueChanged = 1; + }*/ + } + + NumSPrint(numeric,Num); + NumericIncDec = FALSE; + if((bValueChanged)&& CheckForRangefromsetup( numeric, &Num)) + { + MemCopy(&TempData,Data,sizeof(ACTION_DATA)); + TempData.Input.Data.AmiKey.Key.ScanCode = 0; + TempData.Input.Data.AmiKey.Key.UnicodeChar = CHAR_CARRIAGE_RETURN; + ClearNumericShiftState(&(TempData.Input.Data.AmiKey));//EIP-92407 Clearing the Shiftstate before invoking numerichandleaction with CHAR_CARRIAGE_RETURN + gNumeric.HandleAction(numeric,&TempData); + } + // Data updated to variables Now draw it in the screen. + Status = gNumeric.Draw( numeric ); + } + else if( ( numeric->ControlActive )&&(numeric->Base == AMI_BASE_INT_DEC)) + { + DataOk = TRUE; + } + + break; + + case ControlActionAlpha: + case ControlActionNumeric: + Chr = key.Key.UnicodeChar; + switch ( numeric->Base ) + { + case AMI_BASE_BIN: + if ( ( Chr == L'0' ) || ( Chr == L'1' ) ) + DataOk = TRUE; + break; + + case AMI_BASE_OCT: + if ( ( Chr <= L'7' ) && ( Chr >= L'0' ) ) + DataOk = TRUE; + break; + + case AMI_BASE_DEC: + case AMI_BASE_INT_DEC: + if ( ( Chr <= L'9' ) && ( Chr >= L'0' ) ) + DataOk = TRUE; + break; + + case AMI_BASE_HEX: + // EIP: 26473 To support uppercase Hex numbers + if ( ( ( Chr <= L'9' ) && ( Chr >= L'0' ) ) || ( ( Chr >= L'a' ) && ( Chr <= L'f' ) ) || ( ( Chr >= L'A' ) && ( Chr <= L'F' ) )) + + DataOk = TRUE; + break; + } + break; + + case ControlActionNextUp: + case ControlActionNextDown: + case ControlActionNextLeft: + case ControlActionNextRight: + if ( numeric->ControlActive ) + { + MemCopy(&TempData,Data,sizeof(ACTION_DATA)); + TempData.Input.Data.AmiKey.Key.ScanCode = 0; + TempData.Input.Data.AmiKey.Key.UnicodeChar = CHAR_CARRIAGE_RETURN; + ClearNumericShiftState(&(TempData.Input.Data.AmiKey));//EIP-92407 Clearing the Shiftstate before invoking numerichandleaction with CHAR_CARRIAGE_RETURN + gNumeric.HandleAction(numeric,&TempData); + } + break; + + default: + if ( numeric->ControlActive ) + { + MemCopy(&TempData,Data,sizeof(ACTION_DATA)); + TempData.Input.Type = ACTION_TYPE_KEY; + TempData.Input.Data.AmiKey.Key.ScanCode = 0; + TempData.Input.Data.AmiKey.Key.UnicodeChar = CHAR_CARRIAGE_RETURN; + ClearNumericShiftState(&(TempData.Input.Data.AmiKey));//EIP-83703 + //TempData.Input.Data.AmiKey.KeyState.KeyShiftState = 0; + gNumeric.HandleAction(numeric,&TempData); + } + // Only Alpha Numeric chars are allowed. Other Special printable chars not allowed. + if(Data->Input.Data.AmiKey.Key.ScanCode) + DataOk = TRUE; + break; + } + + if ( DataOk ) + Status = gEdit.HandleAction( numeric, Data ); + + if((((!numeric->ControlActive)||(!IsMouseClickedonSoftkbd())) && (TSEMouseIgnoreMouseActionHook() == TRUE) ) + && (((Data->Input.Type == ACTION_TYPE_KEY) && ((Action == ControlActionNextLeft) ||(Action == ControlActionNextRight) ||(Action == ControlActionNextUp) ||(Action == ControlActionNextDown) ||(Action == ControlActionPageUp) ||(Action == ControlActionPageDown) ||(Action == ControlActionAbort) ||(Action == ControlActionHome) ||(Action == ControlActionEnd) ||(CheckKeyinHotKeysList(key))) ) + || ((Data->Input.Type == ACTION_TYPE_MOUSE)&&((!((Data->Input.Data.MouseInfo.Top >= (UINT32)numeric->Top) && (Data->Input.Data.MouseInfo.Top < (UINT32)(numeric->Top+numeric->Height))&& (Data->Input.Data.MouseInfo.Left >= (UINT32)numeric->Left) && (Data->Input.Data.MouseInfo.Left < (UINT32)(numeric->Left+numeric->Width))))||(Action == ControlActionAbort)))) + ) + { + if (numeric->Base == AMI_BASE_INT_DEC || numeric->Base == AMI_BASE_DEC) + NumericSoftKbdExit(); + else if (numeric->Base == AMI_BASE_HEX || numeric->Base == AMI_BASE_OCT) + { + PrintableKeysSoftKbdExit(); + } + } + return Status; +} +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericSetFocus +// +// Description: Function to set focus. +// +// Input: NUMERIC_DATA *numeric, BOOLEAN focus +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericSetFocus( NUMERIC_DATA *numeric, BOOLEAN focus ) +{ + UINT8 u8ChkResult; + + if(focus != FALSE) + { + u8ChkResult = CheckControlCondition( &numeric->ControlData ); + + //Setting focus to control which has no control-condtion and token TSE_SETUP_GRAYOUT_SELECTABLE is enable to set focus for GrayoutIf control + if ( ((u8ChkResult != COND_NONE) && (u8ChkResult != COND_GRAYOUT)) || + (!IsGrayoutSelectable() && (u8ChkResult == COND_GRAYOUT)) + ){ + return EFI_UNSUPPORTED; + } + } + + + if( !(numeric->ControlFocus && focus) ) + numeric->ControlFocus = focus; + return EFI_SUCCESS; +} +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericSetPosition +// +// Description: Function to set position. +// +// Input: NUMERIC_DATA *numeric, UINT16 Left, UINT16 Top +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericSetPosition(NUMERIC_DATA *numeric, UINT16 Left, UINT16 Top ) +{ + return gEdit.SetPosition( numeric, Left, Top ); +} +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericSetDimensions +// +// Description: Function to set dimensions. +// +// Input: NUMERIC_DATA *numeric, UINT16 Width, UINT16 Height +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericSetDimensions(NUMERIC_DATA *numeric, UINT16 Width, UINT16 Height ) +{ + return gEdit.SetDimensions( numeric, Width, Height ); +} +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericSetAttributes +// +// Description: Function to set attributes. +// +// Input: NUMERIC_DATA *numeric, UINT8 FGColor, UINT8 BGColor +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericSetAttributes(NUMERIC_DATA *numeric, UINT8 FGColor, UINT8 BGColor ) +{ + return gEdit.SetAttributes( numeric, FGColor, BGColor ); +} +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumericGetControlHeight +// +// Description: Function to get label height. +// +// Input: NUMERIC_DATA *numeric, UINT16 Width, UINT16 *height +// +// Output: status +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +EFI_STATUS NumericGetControlHeight(NUMERIC_DATA *numeric, VOID* frame , UINT16 *height) +{ + //EIP-72610 TSE_MULTILINE_CONTROLS moved to binary + if(IsTSEMultilineControlSupported()) + { + CHAR16 *newText = NULL,*text=NULL; + UINT16 Width; + + Width = (UINT16)(((EDIT_DATA *)numeric)->TextMargin - (((FRAME_DATA*)frame)->FrameData.Left + (UINT8)gControlLeftPad)); + text = HiiGetString( numeric->ControlData.ControlHandle, UefiGetPromptField((VOID *)numeric->ControlData.ControlPtr)); + if ( text == NULL ) + return EFI_OUT_OF_RESOURCES; + + newText = StringWrapText( text, Width, height ); + + (*height) = (*height) ? (*height):1; + + MemFreePointer( (VOID **)&newText ); + MemFreePointer( (VOID **)&text ); + } + else + { + *height =1; + } + return EFI_SUCCESS; +} + +//<AMI_PHDR_START> +//---------------------------------------------------------------------------- +// Procedure: NumSPrint +// +// Description: Function to print nums. +// +// Input: NUMERIC_DATA *numeric,NUMERIC_MIN_MAX_BASE Num +// +// Output: VOID +// +//---------------------------------------------------------------------------- +//<AMI_PHDR_END> +VOID NumSPrint(NUMERIC_DATA *numeric,NUMERIC_MIN_MAX_BASE Num) +{ + switch(numeric->Base) + { + case AMI_BASE_HEX: + SPrint( numeric->Text, numeric->TextWidth*sizeof(CHAR16), L"%lx", Num ); + break; + case AMI_BASE_INT_DEC: + if(numeric->ControlData.ControlDataWidth == 1) + { + if((INT8)Num < 0) + { + SPrint( numeric->Text, numeric->TextWidth*sizeof(CHAR16), L"%d", (INT8)Num ); + break; + } + } + else if(numeric->ControlData.ControlDataWidth == 2) + { + if((INT16)Num < 0) + { + SPrint( numeric->Text, numeric->TextWidth*sizeof(CHAR16), L"%d", (INT16)Num ); + break; + } + } + else if(numeric->ControlData.ControlDataWidth == 4) + { + if((INT32)Num < 0) + { + SPrint( numeric->Text, numeric->TextWidth*sizeof(CHAR16), L"%d", (INT32)Num ); + break; + } + } + else if(numeric->ControlData.ControlDataWidth == 8) + { + if((INT64)Num < 0) + { + SPrint( numeric->Text, numeric->TextWidth*sizeof(CHAR16), L"%ld", (INT64)Num ); + break; + } + } + SPrint( numeric->Text, numeric->TextWidth*sizeof(CHAR16), L"%d", Num ); + break; + case AMI_BASE_DEC: + default: + SPrint( numeric->Text, numeric->TextWidth*sizeof(CHAR16), L"%ld", Num ); + break; + } + UpdateNumericDisplayString (&(numeric->Text), Num, numeric->Base, numeric->ControlData.ControlDataWidth, numeric->TextWidth*sizeof(CHAR16)); //EIP66976 Provision to change the Numeric string format +} + +//********************************************************************** +//********************************************************************** +//** ** +//** (C)Copyright 1985-2014, American Megatrends, Inc. ** +//** ** +//** All Rights Reserved. ** +//** ** +//** 5555 Oakbrook Pkwy, Building 200,Norcross, Georgia 30093 ** +//** ** +//** Phone: (770)-246-8600 ** +//** ** +//********************************************************************** +//********************************************************************** |