1 files changed, 126 insertions, 0 deletions
diff --git a/ReferenceCode/Chipset/LynxPoint/S3Support/Dxe/PchS3Support.h b/ReferenceCode/Chipset/LynxPoint/S3Support/Dxe/PchS3Support.h
new file mode 100644
index 0000000..817f786
--- /dev/null
+++ b/ReferenceCode/Chipset/LynxPoint/S3Support/Dxe/PchS3Support.h
@@ -0,0 +1,126 @@
+/** @file
+  Header file for PCH S3 Support driver
+
+@copyright
+  Copyright (c) 1999 - 2015 Intel Corporation. All rights reserved
+  This software and associated documentation (if any) is furnished
+  under a license and may only be used or copied in accordance
+  with the terms of the license. Except as permitted by such
+  license, no part of this software or documentation may be
+  reproduced, stored in a retrieval system, or transmitted in any
+  form or by any means without the express written consent of
+  Intel Corporation.
+
+  This file contains an 'Intel Peripheral Driver' and uniquely
+  identified as "Intel Reference Module" and is
+  licensed for Intel CPUs and chipsets under the terms of your
+  license agreement with Intel or your vendor.  This file may
+  be modified by the user, subject to additional terms of the
+  license agreement
+**/
+#ifndef _PCH_S3_SUPPORT_DRIVER_H_
+#define _PCH_S3_SUPPORT_DRIVER_H_
+
+//
+// External include files do NOT need to be explicitly specified in real EDKII
+// environment
+//
+#if !defined(EDK_RELEASE_VERSION) || (EDK_RELEASE_VERSION < 0x00020000)
+
+#include "EdkIIGlueDxe.h"
+#include "EfiScriptLib.h"
+
+//
+// Driver Produced Protocol Prototypes
+//
+#include EFI_PROTOCOL_PRODUCER (PchS3Support)
+#include EFI_GUID_DEFINITION   (S3SupportHob)
+#include EFI_PROTOCOL_CONSUMER (Spi)
+
+#include "PchAccess.h"
+#include "PchPlatformLib.h"
+#endif
+
+///
+/// EDK and EDKII have different GUID formats
+///
+#if !defined(EDK_RELEASE_VERSION) || (EDK_RELEASE_VERSION < 0x00020000)
+#define EFI_PCH_S3_IMAGE_GUID \
+  { \
+    0x271dd6f2, 0x54cb, 0x45e6, 0x85, 0x85, 0x8c, 0x92, 0x3c, 0x1a, 0xc7, 0x6 \
+  }
+#else
+#define EFI_PCH_S3_IMAGE_GUID \
+  { \
+    0x271dd6f2, 0x54cb, 0x45e6, \
+    { \
+      0x85, 0x85, 0x8c, 0x92, 0x3c, 0x1a, 0xc7, 0x6 \
+    } \
+  }
+#endif
+
+extern EFI_GUID gEfiSpiProtocolGuid;
+
+//
+// Function prototypes
+//
+
+/**
+  Set an item to be dispatched at S3 resume time. At the same time, the entry point
+  of the PCH S3 support image is returned to be used in subsequent boot script save
+  call
+
+  @param[in] This                       Pointer to the protocol instance.
+  @param[in] InputDispatchItem          The item to be dispatched.
+  @param[out] S3DispatchEntryPoint      The entry point of the PCH S3 support image.
+
+  @retval EFI_STATUS                    Successfully completed.
+  @retval EFI_OUT_OF_RESOURCES          Out of resources.
+**/
+EFI_STATUS
+EFIAPI
+PchS3SetDispatchItem (
+  IN     EFI_PCH_S3_SUPPORT_PROTOCOL   *This,
+  IN     EFI_PCH_S3_DISPATCH_ITEM      *InputDispatchItem,
+  OUT    EFI_PHYSICAL_ADDRESS          *S3DispatchEntryPoint
+  );
+
+/**
+  Perform the EFI_PCH_S3_SUPPORT_SMM_PROTOCOL IO Trap to invoke DispatchArray data copy and
+  IO Trap Unregister.
+
+  @param[in] This                       Pointer to the protocol instance.
+
+  @retval EFI_SUCCESS                   Successfully completed.
+**/
+EFI_STATUS
+EFIAPI
+S3SupportReadyToLock(
+  IN    EFI_PCH_S3_SUPPORT_PROTOCOL   *This
+  );
+
+/**
+  Initialize the Pch S3 Custom Script memory area.  This will later be transferred to SMRAM.
+  
+  @param[in] VOID
+
+  @retval None
+**/
+EFI_STATUS
+InitializePchS3CustomScriptMemory (
+  VOID
+  );
+
+/**
+  Load the entry point address of the PCHS3Peim from the HOB that it generated during the PEI phase of POST
+
+  @param[out] ImageEntryPoint     The ImageEntryPoint after success loading
+
+  @retval EFI_STATUS
+**/
+EFI_STATUS
+LoadPchS3ImageEntryPoint (
+  OUT   UINT32          *ImageEntryPoint
+  );
+
+#endif