diff options
Diffstat (limited to 'ReferenceCode/Chipset/LynxPoint/SampleCode/AcpiTables/Dsdt/Sensor.asl')
| -rw-r--r-- | ReferenceCode/Chipset/LynxPoint/SampleCode/AcpiTables/Dsdt/Sensor.asl | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/ReferenceCode/Chipset/LynxPoint/SampleCode/AcpiTables/Dsdt/Sensor.asl b/ReferenceCode/Chipset/LynxPoint/SampleCode/AcpiTables/Dsdt/Sensor.asl new file mode 100644 index 0000000..3b61882 --- /dev/null +++ b/ReferenceCode/Chipset/LynxPoint/SampleCode/AcpiTables/Dsdt/Sensor.asl @@ -0,0 +1,103 @@ +/**************************************************************************; +;* *; +;* Intel Confidential *; +;* *; +;* Intel Corporation - ACPI Reference Code for the SandyBridge *; +;* Family of Customer Reference Boards. *; +;* *; +;* *; +;* Copyright (c) 2013 Intel Corporation. All rights reserved *; +;* This software and associated documentation (if any) is furnished *; +;* under a license and may only be used or copied in accordance *; +;* with the terms of the license. Except as permitted by such *; +;* license, no part of this software or documentation may be *; +;* reproduced, stored in a retrieval system, or transmitted in any *; +;* form or by any means without the express written consent of *; +;* Intel Corporation. *; +;* *; +;* *; +;**************************************************************************/ +/*++ + This file contains an 'Intel Peripheral Driver' and is + licensed for Intel CPUs and chipsets under the terms of your + license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the + license agreement +--*/ + + //-------------------- + // Intel Sensor Solution + //-------------------- + Name (_ADR, Zero) + Name (_UID, One) + + Method (_STA, 0, NotSerialized) + { + // check for device enabled in BIOS setup, 1 = enabled + If(LNotEqual(And(SDS0,0x01), 0x01)) { + Return (0x00) // device is disabled in BIOS setup + } + + // check the GPIO mode select, 1 = Sensor Hub + // verify the Sensor Hub _HID + If(LAnd(LEqual(\_SB.RDGP(44), 0x01),LEqual(_HID, "INT33D1"))) { + Return(0xF) // device is Sensor Hub and Sensor Hub mode is selected + } + + // check the GPIO mode select, 0 = DFU + // verify the DFU _HID + If(LAnd(LEqual(\_SB.RDGP(44), 0x00),LEqual(_HID, "INT33D7"))) { + Return(0xF) // device is DFU and DFU mode is selected + } + + Return(0x00) + } + + Method(_DSM, 0x4, NotSerialized) + { + // DSM UUID for HIDI2C. Do Not change. + If(LEqual(Arg0, ToUUID("3CDFF6F7-4267-4555-AD05-B30A3D8938DE"))) + { + // Function 0 : Query Function + If(LEqual(Arg2, Zero)) + { + // Revision 1 + If(LEqual(Arg1, One)) + { + Return(Buffer(One) { 0x03 }) + } + } + // Function 1 : HID Function + If(LEqual(Arg2, One)) + { + // HID Descriptor Address (IHV Specific) + Return(0x0001) + } + } + Else + { + Return(Buffer(One) { 0x00 }) + } + } + + Method (_CRS, 0, NotSerialized) + { + Name (SBFI, ResourceTemplate () + { + I2cSerialBus ( + 0x40, //SlaveAddress: bus address + ControllerInitiated, //SlaveMode: Default to ControllerInitiated + 400000, //ConnectionSpeed: in Hz + AddressingMode7Bit, //Addressing Mode: default to 7 bit + "\\_SB.PCI0.I2C0", //ResourceSource: I2C bus controller name + , //ResourceSourceIndex: defaults to 0 + , //ResourceUsage: Defaults to ResourceConsumer + , //Descriptor Name: creates name for offset of resource descriptor + ) //VendorData + + Interrupt(ResourceConsumer, Level, ActiveLow, Exclusive, , ,) {28} //Route to PIRQM + }) + + Return (SBFI) + } + |