1 files changed, 114 insertions, 0 deletions
diff --git a/ReferenceCode/Chipset/SystemAgent/MemoryInit/Pei/Source/Include/MrcMcConfiguration.h b/ReferenceCode/Chipset/SystemAgent/MemoryInit/Pei/Source/Include/MrcMcConfiguration.h
new file mode 100644
index 0000000..6a094d1
--- /dev/null
+++ b/ReferenceCode/Chipset/SystemAgent/MemoryInit/Pei/Source/Include/MrcMcConfiguration.h
@@ -0,0 +1,114 @@
+/** @file
+  Non training specific memory controller configuration definitions.
+
+@copyright
+  Copyright (c) 1999 - 2012 Intel Corporation. All rights reserved.
+  This software and associated documentation (if any) is furnished
+  under a license and may only be used or copied in accordance
+  with the terms of the license. Except as permitted by such
+  license, no part of this software or documentation may be
+  reproduced, stored in a retrieval system, or transmitted in any
+  form or by any means without the express written consent of
+  Intel Corporation.
+
+  This file contains an 'Intel Peripheral Driver' and uniquely
+  identified as "Intel Reference Module" and is
+  licensed for Intel CPUs and chipsets under the terms of your
+  license agreement with Intel or your vendor.  This file may
+  be modified by the user, subject to additional terms of the
+  license agreement.
+**/
+#ifndef __MrcMcConfiguration_h__
+#define __MrcMcConfiguration_h__
+
+#include "MrcTypes.h"
+#include "MrcApi.h"
+#include "McAddress.h"
+#include "MrcAddressDecodeConfiguration.h"
+#include "MrcCommandTraining.h"
+#include "MrcCommon.h"
+#include "MrcGeneral.h"
+#include "MrcGlobal.h"
+#include "MrcOem.h"
+#include "MrcOemIo.h"
+#include "MrcRefreshConfiguration.h"
+#include "MrcSchedulerParameters.h"
+#include "MrcTimingConfiguration.h"
+
+#define DISABLE_ODT_STATIC  (0)     ///< May change in the future
+#define CDIEVSSHI           (2000)  ///< Constant CdieVssHi = 2000 (value in pF)
+#define RCMDREF             (100)   ///< Constant RcmdRef = 100 (value in ohm)
+
+/**
+@brief
+  This function calculates the two numbers that get you closest to the slope.
+
+  @param[in] Slope - targeted slope (multiplied by 100 for int match)
+
+  @retval Returns the Slope Index to be programmed for VtSlope.
+**/
+extern
+U8
+MrcCalcVtSlopeCode (
+  const U16 Slope
+  );
+
+/**
+@brief
+  This function performs the memory controller configuration non training sequence.
+
+  @param[in, out] MrcData - Include all MRC global data.
+
+  @retval MrcStatus - mrcSuccess if successful or an error status
+**/
+extern
+MrcStatus
+MrcMcConfiguration (
+  MrcParameters *const MrcData
+  );
+
+/**
+@brief
+  This function init all the necessary registers for the training.
+
+  @param[in] MrcData - Include all MRC global data.
+
+  @retval mrcSuccess
+**/
+extern
+MrcStatus
+MrcPreTraining (
+  MrcParameters *const MrcData
+  );
+
+/**
+@brief
+  This function initializes all the necessary registers after main training steps but before LCT.
+
+  @param[in] MrcData - Include all MRC global data.
+
+  @retval mrcSuccess
+**/
+extern
+MrcStatus
+MrcPostTraining (
+  MrcParameters *const MrcData
+  );
+
+/**
+@brief
+  Program PCU_CR_DDR_VOLTAGE register.
+
+  @param[in] MrcData    - Include all MRC global data.
+  @param[in] VddVoltage - Current DDR voltage.
+
+  @retval none
+**/
+extern
+void
+MrcSetPcuDdrVoltage (
+  IN OUT MrcParameters *MrcData,
+  IN     MrcVddSelect  VddVoltage
+  );
+
+#endif // __MrcMcConfiguration_h__