1 files changed, 95 insertions, 0 deletions
diff --git a/ReferenceCode/ME/Guid/MeBiosExtensionSetup/MeBiosExtensionSetup.h b/ReferenceCode/ME/Guid/MeBiosExtensionSetup/MeBiosExtensionSetup.h
new file mode 100644
index 0000000..24e5c75
--- /dev/null
+++ b/ReferenceCode/ME/Guid/MeBiosExtensionSetup/MeBiosExtensionSetup.h
@@ -0,0 +1,95 @@
+/** @file
+  Me Bios Extension 16 Setup Options Guid definitions
+
+@copyright
+  Copyright (c) 2005 - 2012 Intel Corporation. All rights reserved
+  This software and associated documentation (if any) is furnished
+  under a license and may only be used or copied in accordance
+  with the terms of the license. Except as permitted by such
+  license, no part of this software or documentation may be
+  reproduced, stored in a retrieval system, or transmitted in any
+  form or by any means without the express written consent of
+  Intel Corporation.
+
+  This file contains an 'Intel Peripheral Driver' and uniquely
+  identified as "Intel Reference Module" and is
+  licensed for Intel CPUs and chipsets under the terms of your
+  license agreement with Intel or your vendor.  This file may
+  be modified by the user, subject to additional terms of the
+  license agreement
+**/
+#ifndef _EFI_ME_BIOS_EXTENSION_SETUP_GUID_H_
+#define _EFI_ME_BIOS_EXTENSION_SETUP_GUID_H_
+
+///
+/// A NV-RAM variable for storing Intel MEBX setup option settings is created if this variable is not
+/// present.  Those settings are used by BIOS during POST to bypass portions of the code if the
+/// Intel ME features are not available
+///
+#define EFI_ME_BIOS_EXTENSION_SETUP_GUID \
+  { \
+    0x1bad711c, 0xd451, 0x4241, 0xb1, 0xf3, 0x85, 0x37, 0x81, 0x2e, 0xc, 0x70 \
+  }
+
+#define EFI_ME_BIOS_EXTENSION_SETUP_VARIABLE_NAME         (L"MeBiosExtensionSetup")
+#define EFI_ME_BIOS_EXTENSION_SETUP_FORMAT_VARIABLE_NAME  ("MeBiosExtensionSetup")
+
+extern CHAR16   gEfiMeBiosExtensionSetupName[];
+
+extern EFI_GUID gEfiMeBiosExtensionSetupGuid;
+
+#pragma pack(1)
+
+///
+/// A NV-RAM variable for storing Intel MEBX setup option settings is created if this variable is not
+/// present.  Those settings are used by BIOS during POST to bypass portions of the code if the
+/// Intel ME features are not available. The information is obtained from Intel MEBx BIOS sync data
+/// structure
+///
+typedef struct {
+  ///
+  /// Sync Data Structure Version, a non-zero version indicates the variable is being initialized or valid
+  ///
+  UINT16  InterfaceVersion;
+  UINT16  Reserved;
+  ///
+  /// Bit 0 - UPDATED - this structure has been updated by MEBX
+  ///
+  UINT32  Flags;
+  ///
+  /// Platform Manageability Selection
+  ///   00h - Off
+  ///   01h - On
+  ///
+  UINT8   PlatformMngSel;
+  UINT8   Reserved4;
+  UINT8   AmtSolIder;
+  UINT8   Reserved1[2];
+  ///
+  /// CIRA Feature
+  ///   00h - DISABLED
+  ///   01h - ENABLED
+  ///
+  UINT8   RemoteAssistanceTriggerAvailablilty;
+  ///
+  /// KVM state (0 - DISABLED, 1 - ENABLED)
+  ///
+  UINT8   KvmEnable;
+  ///
+  /// 0 - On every later boot after BIOS 1st boot
+  /// 1 - Mebx will not require a reboot for synchronizing SOL/IDER state, used when BIOS 1st boot only.
+  ///
+  UINT8   MebxDefaultSolIder;
+  UINT8   Reserved2[10];
+} ME_BIOS_EXTENSION_SETUP;
+
+#define MNT_OFF     0x00
+#define MNT_ON      0x01
+#define LAN_ENABLE  0x01
+#define SOL_ENABLE  0x01
+#define IDER_ENABLE 0x02
+#define KVM_ENABLE  0x01
+
+#pragma pack()
+
+#endif