From a2303a031a4a69b505a704b6e716a81c8e70cb21 Mon Sep 17 00:00:00 2001 From: raywu Date: Fri, 15 Jun 2018 10:48:05 +0800 Subject: Add Modules 1 > 4.6.3.5_SIO_F81866_A5 2 > 4.6.3_SIO_F81216_Sec_A9 --- Board/IO/F81216/F81216.ASL | 505 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 505 insertions(+) create mode 100644 Board/IO/F81216/F81216.ASL (limited to 'Board/IO/F81216/F81216.ASL') diff --git a/Board/IO/F81216/F81216.ASL b/Board/IO/F81216/F81216.ASL new file mode 100644 index 0000000..ebc950f --- /dev/null +++ b/Board/IO/F81216/F81216.ASL @@ -0,0 +1,505 @@ +// THIS FILE IS INCLUDED to South Bridge device scope +//************************************************************************* +//************************************************************************* +//** ** +//** (C)Copyright 1985-2011, American Megatrends, Inc. ** +//** ** +//** All Rights Reserved. ** +//** ** +//** 5555 Oakbrook Parkway, Suite 200, Norcross, GA 30093 ** +//** ** +//** Phone: (770)-246-8600 ** +//** ** +//************************************************************************* +//************************************************************************* +// +//************************************************************************* +// $Header: /Alaska/BIN/IO/Fintek/F81216_Sec/F81216.ASL 6 4/01/13 3:15a Elviscai $ +// +// $Revision: 6 $ +// +// $Date: 4/01/13 3:15a $ +//************************************************************************* +// Revision History +// ---------------- +// $Log: /Alaska/BIN/IO/Fintek/F81216_Sec/F81216.ASL $ +// +// 6 4/01/13 3:15a Elviscai +// [TAG] EIP115780 +// [Category] Bug Fix +// [Symptom] Burn in test faile while dual IO using same idex/data port +// [RootCause] Method DSTA retrned before exit config mode. +// +// 5 7/18/12 9:31p Elviscai +// [TAG] EIPNONE +// [Category] Bug Fix +// [Solution] Change UHID judgement if IR mode +// +// 4 2/01/12 10:46p Elviscai +// [TAG] EIP76584 +// [Category] Bug Fix +// [Severity] Important +// [Symptom] BIT test fail under OS +// [Solution] Update DSR3 Method +// +// 3 7/04/11 3:22a Kasalinyi +// [Category] Improvement +// [Description] Update to new template +// [Files] IO_F81216.SDL +// F81216.ASL +// F81216.MAK +// F81216.SD +// F81216.UNI +// F81216DXE.C +// F81216PEI.C +// F81216Setup.H +// F81216.CIF +// +// 2 10/28/10 2:25a Mikes +// Clean code and implement new name rule +// +// 1 3/31/10 5:55a Fantasylai +// Initial release to F81216 just as a second IO +// +//************************************************************************* + +// +// +// Name: +// +// Description: Define ACPI method or namespce For Super IO +// +// +//************************************************************************* +//Scope(\_SB.PCI0.SBRG) { +//----------------------------------------------------------------------- +// SET OF COMMON DATA/CONTROL METHODS USED FOR ALL LDN BASED SIO DEVICES +//----------------------------------------------------------------------- +// LIST of objects defined in this file: +// SIO specific: SIOR - Device node (_HID=0c02, UID=SPIO), SIO index/DAta IO access & SIO GPIO address space if available +// SIO specific: DCAT - Table correspondence the LDNs to Device order in Routing Table. +// SIO specific: ENFG & EXFG - Control methods to Enter and Exit configuration mode. ENFG & EXFG correspondingly +// SIO specific: LPTM - current parralel port mode +// SIO specific: UHID - PnP ID for given Serial port +// SIO specific: SIOS - SIO Chipset specific code called from _PTS +// SIO specific: SIOW - SIO Chipset specific code called from _WAK +// SIO specific: SIOH - SIO event handler, to be called from correspondent _Lxx method +// SIO specific: PowerResources & _PR0 object to control Power management for FDC, LPT, UART1,2. +// +// Generic :OpRegion & common Fields to access SIO configuration space +// Generic :CGLD - Convert Device category to LDN +// Generic :DSTA - Get device status according to ACTR register in LD IO space +// Generic :DCNT - Enable/Disable Decoding of Device resources, Route/Release resources to LPC bus +// Generic :DCRS - Returns Byte stream of device's Current resources +// Generic :DSRS - Configures new Resources to be decoded by a Device +// Device node:Motherboard resources +// SIO index/DAta IO access & SIO GPIO address space if available +Device(SIO2) { + Name(_HID, EISAID("PNP0C02")) // System board resources device node ID + Name(_UID,0x222) // Unique ID. First IO use 0x111, Second IO use 0x222 ... + + Name(CRS, ResourceTemplate(){ + IO(Decode16, 0, 0, 0, 0, IOI) // Index/Data Io address + }) // end CRS + + Method (_CRS, 0){ + // Reserve Super I/O Configuration Port + // 0x0 to 0xF0 already reserved + // 0x3F0 - 0x3F1 are reserved in FDC + If(LAnd(LLess(SP2O, 0x3F0), LGreater(SP2O, 0x0F0))){ + CreateWordField(CRS, ^IOI._MIN, GPI0) + CreateWordField(CRS, ^IOI._MAX, GPI1) + CreateByteField(CRS, ^IOI._LEN, GPIL) + Store(SP2O, GPI0) //Index/Data Base address + Store(SP2O, GPI1) + Store(0x02, GPIL) //IO range + } + Return(CRS) + } //End _CRS + + //--------------------------------------------------------------------- + // Table correspondence the LDNs to Device order in Routing Table + // Device type selection is achieved by picking the value from DCAT Package by Offset = LDN + //---------------------------------------------------------------------- + // Elements in the package contain LDN numbers for each category of devices. + // Default value 0xFF -> no device present. + // Make sure number of elements not less or equal to largest LDN + Name (DCAT, Package(0x15){ + // AMI_TODO: fill the table with the present LDN + // LDN number, 0xFF if device not present + // We keep category 0x00~0x0F as SIO_DEV_STATUS layout in GenericSio.h to Update IOST + 0xFF, // 0x00 - Serial A (SP1) + 0xFF, // 01 - Serial B (SP2) + 0xFF, // 02 - LPT + 0xFF, // 03 - FDD + 0xFF, // 04 - SB16 Audio + 0xFF, // 05 - MIDI + 0xFF, // 06 - MSS Audio + 0xFF, // 07 - AdLib sound (FM synth) + 0xFF, // 08 - Game port #1 + 0xFF, // 09 - Game port #2 + 0xFF, // 0A - KBC 60 & 64 + 0xFF, // 0B - EC 62 & 66 + 0xFF, // 0C - Reserved + 0xFF, // 0D - Reserved + 0xFF, // 0E - PS/2 Mouse + 0xFF, // 0F - Reserved +//----add your other device below,if no,please cut and modify Package number----------// + 0xFF, // 10 - CIR + 0x00, // 11 - Serial A2 + 0x01, // 12 - Serial B2 + 0x02, // 13 - Serial C2 + 0x03, // 14 - Serial D2 + }) + + //--------------------------------------------------------------------- + // Mutex object to sincronize the access to Logical devices + //--------------------------------------------------------------------- + Mutex(MUT0, 0) + + //--------------------------------------------------------------------- + // Enter Config Mode, Select LDN + // Arg0 : Logical Device number + //--------------------------------------------------------------------- + Method(ENFG, 1) { + Acquire(MUT0, 0xFFF) + Store(ENT2, INDX) + Store(ENT2, INDX) + Store(Arg0, LDN) //Select LDN + } + + //--------------------------------------------------------------------- + // Exit Config Mode + //--------------------------------------------------------------------- + Method(EXFG, 0) { + //AMI_TODO: exit config mode + Store(0xAA, INDX) + Release(MUT0) + } + //--------------------------------------------------------------------- + // Return current UART mode PnP ID : 0-plain Serial port, non Zero-IrDa mode + // Arg0 : Device Category # + //--------------------------------------------------------------------- + Method(UHID, 1){ + //AMI_TODO: Return the correct HID base on UART mode (UART/IR) + ENFG(CGLD(Arg0)) //Enter Config Mode, Select LDN + And(OPT1, 0x10, Local0) //Ir mode is active + EXFG() //Exit Config Mode + If (Local0) { //Get Uart mode : 0-Serial port, non-zero - IrDa + Return(EISAID("PNP0510")) //PnP Device ID IrDa + } + Else { + Return(EISAID("PNP0501")) //PnP Device ID 16550 Type + } + } + +//------------------------------------------------------------------------- +// !!! BELOW ARE GENERIC SIO CONTROL METHODS. DO NOT REQUIRE MODIFICATIONS +//------------------------------------------------------------------------- + +// +//------------------------------------------------------------------------ +// Name: IOID +// +// Type: OperationRegion +// +// Description: Operation Region to point to SuperIO configuration space +// +// Notes: OpeRegion address is defined by 'SP2O' global name. +// 'SPIO' is a field isnside AML_Exchange data area defined in SDL file. +// +// Referrals: BIOS, AMLDATA +// +//------------------------------------------------------------------------- +// + //--------------------------------------------------------------------- + // Set of Field names to be used to access SIO configuration space. + //--------------------------------------------------------------------- + OperationRegion(IOID, // Name of Operation Region for SuperIO device + SystemIO, // Type of address space + SP2O, // Offset to start of region + 2) // Size of region in bytes + // End of Operation Region + Field(IOID, ByteAcc, NoLock,Preserve){ + INDX, 8, // Field named INDX is 8 bit wide + DATA, 8 // Field DATA is 8 bit wide + } + + //--------------------------------------------------------------------- + // Set of Field names to be used to access SIO configuration space. + //--------------------------------------------------------------------- + IndexField(INDX, DATA, ByteAcc, NoLock, Preserve){ + Offset(0x07), + LDN, 8, //Logical Device Number + + Offset(0x25), + SCF5, 8, //Set SCF5 + + Offset(0x30), + ACTR, 8, //Activate register + Offset(0x60), + IOAH, 8, //Base I/O High addr + IOAL, 8, //Base I/O Low addr + IOH2, 8, //Base2 I/O High addr + IOL2, 8, //Base2 I/O Low addr + Offset(0x70), + INTR, 4, //IRQ + INTT, 4, //IRQ type + Offset(0x74), + DMCH, 8, //DMA channel + Offset(0xE0), + RGE0, 8, //Option Register E0 + RGE1, 8, //Option Register E1 + RGE2, 8, //Option Register E2 + RGE3, 8, //Option Register E3 + RGE4, 8, //Option Register E4 + RGE5, 8, //Option Register E5 + RGE6, 8, //Option Register E6 + RGE7, 8, //Option Register E7 + RGE8, 8, //Option Register E8 + RGE9, 8, //Option Register E9 + Offset(0xF0), + OPT0, 8, //Option register 0xF0 + OPT1, 8, //Option register 0xF1 + OPT2, 8, //Option register 0xF2 + OPT3, 8, //Option register 0xF3 + OPT4, 8, //Option register 0xF4 + OPT5, 8, //Option register 0xF5 + OPT6, 8, //Option register 0xF6 + OPT7, 8, //Option register 0xF7 + OPT8, 8, //Option register 0xF8 + OPT9, 8, //Option register 0xF9 + } //End of indexed field + +// +//------------------------------------------------------------------------ +// Procedure: CGLD +// Description: Convert Device Category to Device's LDN +// Input: Arg0 : Device category # +// Output: LDN +//------------------------------------------------------------------------- +// + Method(CGLD, 1) { + Return(DeRefOf(Index(DCAT, Arg0))) // Return LDN + } + + +// +//------------------------------------------------------------------------ +// Procedure: DSTA +// Description: GET SIO DEVICE STATUS according to ACTR/IOST(category0x00~0x0F) return values +// GET SIO DEVICE STATUS according to ACTR/IOAH+IOAL/IOH2+IOL2(category>0x0F) +// Input: Arg0 : Device category # +// Output: Device Status +//------------------------------------------------------------------------- +// + Method(DSTA, 1) { + // IO Device presence status is determined during first _STA invocation. + // If "Activate" bit is set during first _STA invocation, IO device + // present status is stored into IOST global variable. + // IOST global variable contains the bit mask of all enabled Io devices. + ENFG(CGLD(Arg0)) //Enter Config Mode, Select LDN + Store(ACTR, Local0) + Or(ShiftLeft(IOAH, 8),IOAL,Local1) + EXFG() //Exit Config Mode + + // LDN's not decoded, Device not present. + If(LEqual(Local0, 0xFF)) {Return(0x0)} + + //Assume register(ACTR) bit0 is "Active" bit. + //AMI_TODO: If register(ACTR) non-bit0 is "Active" bit, change below code. + And(Local0, 1, Local0) //Leave only "Activate" bit + + // Update IO device status in IOST according to the category# + // Note. Once device is detected its status bit cannot be removed + If(Local0){ + Return(0x0F) // Device present & Active + } + Else{ + If(Local1) { Return(0x0D)} // Device Detected & Not Active +// Or(ShiftLeft(IOH2, 8),IOL2,Local0) +// If(Local0) { Return(0x0D)} // Device Detected & Not Active + Return(0x00) // Device not present + } + } // End Of DSTA + + +// +//------------------------------------------------------------------------ +// Procedure: DCNT +// Description: Enable/Disable Decoding of Device resources, Route/Release +// I/O & DMA Resources From, To EIO/LPC Bus +// Input: Arg0 : Device catagory # +// Arg1 : 0/1 Disable/Enable resource decoding +// Output:Nothing +//------------------------------------------------------------------------- +// + Method(DCNT, 2) { + + ENFG(CGLD(Arg0)) //Enter Config Mode, Select LDN + + // Route/Release DMA channel from/to being ISA/PCI mode + // Note. DMA channel 0 is currently not decoded, although it can be + // used on some of SIO chipsets. + If(LAnd(LLess(DMCH,4), LNotEqual(And(DMCH, 3, Local1),0))){ + rDMA(Arg0, Arg1, Increment(Local1)) + } + + Store(Arg1, ACTR) // Update Activate Register + ShiftLeft(IOAH, 8, local1) // Get IO Base address + Or(IOAL, Local1, Local1) + + // Route/Release I/O resources from/to EIO/LPC Bus + // Arg0 Device Category + // Arg1 0/1 Disable/Enable resource decoding + // Arg2 Port to Route/Release + // Arg3 Port SIZE to Route + RRIO(Arg0, Arg1, Local1, 0x08) + + EXFG() // Exit Config Mode + } // End DCNT + +// +//------------------------------------------------------------------------ +// Name: CRS1,CRS2,CRS3 +// +// Type: ResourceTemplate +// +// Description: Current Resources Buffer for Generic SIO devices +// +// Notes: Note. DMA channel 0 is currently decoded as reserved, +// although, it can be used on some of SIO chipsets. +// Add DMA0 to _PRS if it is used +// Generic Resourse template for FDC, COMx, LPT and ECP Current Resource Settings +// (to be initialized and returned by _CRS) +//------------------------------------------------------------------------- +// + + // CRS buffer without DMA resource + Name(CRS3, ResourceTemplate(){ + IO(Decode16, 0, 0, 1, 0, IO04) + IRQ(Level,ActiveLow,Shared,IRQ3){} + DMA(Compatibility, NotBusMaster, Transfer8, DMA3) {} + }) + CreateWordField(CRS3, IRQ3._INT, IRQT) //IRQ mask 0x9 + CreateByteField(CRS3, 0x0B,IRQS) //IRQ Shared/Active-Low/Edge-Triggered/=0x19 0xB + CreateByteField(CRS3, DMA3._DMA, DMAT) //DMA 0x4 + CreateWordField(CRS3, IO04._MIN, IO41) //Range 1 Min Base Word 0x2 + CreateWordField(CRS3, IO04._MAX, IO42) //Range 1 Max Base Word 0x4 + CreateByteField(CRS3, IO04._LEN, LEN4) //Length 1 0x7 + +// +//------------------------------------------------------------------------ +// Procedure: DCR3 +// Description: Get FDC, LPT, ECP, UART, IRDA resources (_CRS) +// Returns Byte stream of Current resources. May contain Resources such: +// 1 IRQ resource +// 1 IO Port +// Input: Arg0 : Device catagory # +// Output: _CRS Resource Buffer +//------------------------------------------------------------------------- +// + Method(DCR3, 2) { + + ENFG(CGLD(Arg0)) // Enter Config Mode, Select LDN + + // Write Current Settings into Buffer for 1st IO Descriptor + ShiftLeft(IOAH, 8, IO41) //Get IO Base MSB + Or(IOAL, IO41, IO41) //Get IO Base LSB + Store(IO41, IO42) //Get Max Base Word + Store(0x08, LEN4) + + // Write Current Settings into IRQ descriptor + If(INTR){ + ShiftLeft(1, INTR, IRQT) + // Set IRQ Type:porting according INTT + //AMI_TODO: + If(And(INTT,0x01)){ + Store(0x18, IRQS) // IRQ Type: Active-Low-Level-Triggered,Shared. + } Else { + Store(1, IRQS) // IRQ Type: Active-High-Edge-Triggered,No-Shared(default) + } + }Else{ + Store(0, IRQT) // No IRQ used + } + // Write Current Settings into DMA descriptor + // Note. DMA channel 0 is currently decoded as reserved, + // although, it can be used on some of SIO chipsets. + //If(Or(LGreater(DMCH,3), LEqual(And(DMCH, 3, Local1),0))){ + If(LOr(LGreater(DMCH,3), LEqual(Arg1, 0))){ + Store(0, DMAT) // No DMA + } Else { + And(DMCH, 3, Local1) + ShiftLeft(1, Local1, DMAT) + } + + EXFG() // Exit Config Mode + Return(CRS3) //Return Current Resources + } +// +//------------------------------------------------------------------------ +// Procedure: DSR3 +// Description: Set FDC, LPT, ECP, UART, IRDA resources (_SRS) +// Control method can be used for configuring devices with following resource order: +// 1 IRQ resource +// 1 IO Port +// Input: Arg0 : PnP Resource String to set +// Arg1 : Device catagory # +// Output: Nothing +//------------------------------------------------------------------------- +// + Method(DSR3, 2) { + CreateWordField(Arg0, ^IO04._MIN, IO41) //Range 1 Min Base Word 0x8 + CreateWordField(Arg0, ^IRQ3._INT, IRQT) //IRQ mask 0x1 + CreateByteField(Arg0, 0x0B, IRQS) //IRQ Flag + CreateByteField(Arg0, ^DMA3._DMA, DMAT) //DMA + + ENFG(CGLD(Arg1)) // Enter Config Mode, Select LDN + + // Set Base IO Address + And(IO41,0xff, IOAL) //Set IO Base LSB + ShiftRight(IO41, 0x8, IOAH) //Set IO Base MSB + + // Set IRQ + If(IRQT){ + FindSetRightBit(IRQT, Local0) + Subtract(Local0, 1, INTR) + //Set IRQ flag,AMI_TODO: bit4:_SHR,bit3:_LL,bit0:_HE + Store(0x01, INTT) //some relative share,active-low/high registers + }Else{ + Store(0, INTR) //No IRQ used + } + // Set DMA + If(DMAT){ + FindSetRightBit(DMAT, Local0) + Subtract(Local0, 1, DMCH) + }Else{ + Store(4, DMCH) //No DMA + } + + EXFG() // Exit Config Mode + // Enable ACTR + DCNT(Arg1, 1) // Enable Device (Routing) + Store(Arg1, Local2) + If (LGreater(Local2, 0)){Subtract(Local2, 1, Local2)} + } + +} // End of SIO2 + +//************************************************************************* +//************************************************************************* +//** ** +//** (C)Copyright 1985-2011, American Megatrends, Inc. ** +//** ** +//** All Rights Reserved. ** +//** ** +//** 5555 Oakbrook Parkway, Suite 200, Norcross, GA 30093 ** +//** ** +//** Phone: (770)-246-8600 ** +//** ** +//************************************************************************* +//************************************************************************* + + + + -- cgit v1.2.3