From b7c51c9cf4864df6aabb99a1ae843becd577237c Mon Sep 17 00:00:00 2001 From: raywu Date: Fri, 15 Jun 2018 00:00:50 +0800 Subject: init. 1AQQW051 --- Core/CORE_DXE/Dispatcher.c | 1351 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1351 insertions(+) create mode 100644 Core/CORE_DXE/Dispatcher.c (limited to 'Core/CORE_DXE/Dispatcher.c') diff --git a/Core/CORE_DXE/Dispatcher.c b/Core/CORE_DXE/Dispatcher.c new file mode 100644 index 0000000..751a9dd --- /dev/null +++ b/Core/CORE_DXE/Dispatcher.c @@ -0,0 +1,1351 @@ +/*++ + +Copyright (c) 2004 - 2007, Intel Corporation +All rights reserved. This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +Module Name: + + Dispatcher.c + +Abstract: + + Tiano DXE Dispatcher. + + Step #1 - When a FV protocol is added to the system every driver in the FV + is added to the mDiscoveredList. The SOR, Before, and After Depex are + pre-processed as drivers are added to the mDiscoveredList. If an Apriori + file exists in the FV those drivers are addeded to the + mScheduledQueue. The mFvHandleList is used to make sure a + FV is only processed once. + + Step #2 - Dispatch. Remove driver from the mScheduledQueue and load and + start it. After mScheduledQueue is drained check the + mDiscoveredList to see if any item has a Depex that is ready to + be placed on the mScheduledQueue. + + Step #3 - Adding to the mScheduledQueue requires that you process Before + and After dependencies. This is done recursively as the call to add + to the mScheduledQueue checks for Before and recursively adds + all Befores. It then addes the item that was passed in and then + processess the After dependecies by recursively calling the routine. + + Dispatcher Rules: + The rules for the dispatcher are in chapter 10 of the DXE CIS. Figure 10-3 + is the state diagram for the DXE dispatcher + + Depex - Dependency Expresion. + SOR - Schedule On Request - Don't schedule if this bit is set. + +--*/ + +#include "Tiano.h" +#include "DxeCore.h" +#include "FwVolBlock.h" +#include EFI_GUID_DEFINITION (Apriori) + +// +// The Driver List contains one copy of every driver that has been discovered. +// Items are never removed from the driver list. List of EFI_CORE_DRIVER_ENTRY +// +EFI_LIST_ENTRY mDiscoveredList = INITIALIZE_LIST_HEAD_VARIABLE (mDiscoveredList); + +// +// Queue of drivers that are ready to dispatch. This queue is a subset of the +// mDiscoveredList.list of EFI_CORE_DRIVER_ENTRY. +// +EFI_LIST_ENTRY mScheduledQueue = INITIALIZE_LIST_HEAD_VARIABLE (mScheduledQueue); + +// +// List of handles who's Fv's have been parsed and added to the mFwDriverList. +// +EFI_LIST_ENTRY mFvHandleList = INITIALIZE_LIST_HEAD_VARIABLE (mFvHandleList); // list of KNOWN_HANDLE + +// +// Lock for mDiscoveredList, mScheduledQueue, mDispatcherRunning. +// +EFI_LOCK mDispatcherLock = EFI_INITIALIZE_LOCK_VARIABLE (EFI_TPL_HIGH_LEVEL); + + +// +// Flag for the DXE Dispacher. TRUE if dispatcher is execuing. +// +BOOLEAN mDispatcherRunning = FALSE; + +// +// Module globals to manage the FwVol registration notification event +// +EFI_EVENT mFwVolEvent; +VOID *mFwVolEventRegistration; + +// +// List of file types supported by dispatcher +// +static EFI_FV_FILETYPE mDxeFileTypes[] = { + EFI_FV_FILETYPE_DRIVER, + EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER, + EFI_FV_FILETYPE_DXE_CORE, + EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE +//*** AMI PORTING BEGIN ***// +#if PI_SPECIFICATION_VERSION >= 0x0001000A + ,EFI_FV_FILETYPE_COMBINED_SMM_DXE +#endif +//*** AMI PORTING END *****// +}; + +typedef struct { + MEDIA_FW_VOL_FILEPATH_DEVICE_PATH File; + EFI_DEVICE_PATH_PROTOCOL End; +} FV_FILEPATH_DEVICE_PATH; + +FV_FILEPATH_DEVICE_PATH mFvDevicePath; +// +// Function Prototypes +// +VOID +CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter ( + IN EFI_CORE_DRIVER_ENTRY *InsertedDriverEntry + ); + +VOID +EFIAPI +CoreFwVolEventProtocolNotify ( + IN EFI_EVENT Event, + IN VOID *Context + ); + +EFI_DEVICE_PATH_PROTOCOL * +CoreFvToDevicePath ( +#if (PI_SPECIFICATION_VERSION < 0x00010000) + IN EFI_FIRMWARE_VOLUME_PROTOCOL *Fv, +#else + IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv, +#endif + IN EFI_HANDLE FvHandle, + IN EFI_GUID *DriverName + ); + +STATIC +EFI_STATUS +CoreAddToDriverList ( +#if (PI_SPECIFICATION_VERSION < 0x00010000) + IN EFI_FIRMWARE_VOLUME_PROTOCOL *Fv, +#else + IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv, +#endif + IN EFI_HANDLE FvHandle, + IN EFI_GUID *DriverName + ); + +STATIC +EFI_STATUS +CoreProcessFvImageFile ( +#if (PI_SPECIFICATION_VERSION < 0x00010000) + IN EFI_FIRMWARE_VOLUME_PROTOCOL *Fv, +#else + IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv, +#endif + IN EFI_HANDLE FvHandle, + IN EFI_GUID *DriverName + ); + + +VOID +CoreAcquireDispatcherLock ( + VOID + ) +/*++ + +Routine Description: + + Enter critical section by gaining lock on mDispatcherLock + +Arguments: + + None + +Returns: + + None + +--*/ + +{ + CoreAcquireLock (&mDispatcherLock); +} + +VOID +CoreReleaseDispatcherLock ( + VOID + ) +/*++ + +Routine Description: + + Exit critical section by releasing lock on mDispatcherLock + +Arguments: + + None + +Returns: + + None + +--*/ +{ + CoreReleaseLock (&mDispatcherLock); +} + + +EFI_STATUS +CoreGetDepexSectionAndPreProccess ( + IN EFI_CORE_DRIVER_ENTRY *DriverEntry + ) +/*++ + +Routine Description: + + Read Depex and pre-process the Depex for Before and After. If Section Extraction + protocol returns an error via ReadSection defer the reading of the Depex. + +Arguments: + + DriverEntry - Driver to work on. + +Returns: + + EFI_SUCCESS - Depex read and preprossesed + + EFI_PROTOCOL_ERROR - The section extraction protocol returned an error and + Depex reading needs to be retried. + + Other Error - DEPEX not found. + +--*/ +{ + EFI_STATUS Status; + EFI_SECTION_TYPE SectionType; + UINT32 AuthenticationStatus; +#if (PI_SPECIFICATION_VERSION < 0x00010000) + EFI_FIRMWARE_VOLUME_PROTOCOL *Fv; +#else + EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv; +#endif + + Fv = DriverEntry->Fv; + + // + // Grab Depex info, it will never be free'ed. + // + SectionType = EFI_SECTION_DXE_DEPEX; + Status = Fv->ReadSection ( + DriverEntry->Fv, + &DriverEntry->FileName, + SectionType, + 0, + &DriverEntry->Depex, + (UINTN *)&DriverEntry->DepexSize, + &AuthenticationStatus + ); + if (EFI_ERROR (Status)) { + if (Status == EFI_PROTOCOL_ERROR) { + // + // The section extraction protocol failed so set protocol error flag + // + DriverEntry->DepexProtocolError = TRUE; + } else { + // + // If no Depex assume EFI 1.1 driver model + // + DriverEntry->Depex = NULL; + DriverEntry->Dependent = TRUE; + DriverEntry->DepexProtocolError = FALSE; + } + } else { + // + // Set Before, After, and Unrequested state information based on Depex + // Driver will be put in Dependent or Unrequested state + // + CorePreProcessDepex (DriverEntry); + DriverEntry->DepexProtocolError = FALSE; + } + + return Status; +} + +EFI_DXESERVICE +EFI_STATUS +EFIAPI +CoreSchedule ( + IN EFI_HANDLE FirmwareVolumeHandle, + IN EFI_GUID *DriverName + ) +/*++ + +Routine Description: + + Check every driver and locate a matching one. If the driver is found, the Unrequested + state flag is cleared. + +Arguments: + + FirmwareVolumeHandle - The handle of the Firmware Volume that contains the firmware + file specified by DriverName. + + DriverName - The Driver name to put in the Dependent state. + +Returns: + + EFI_SUCCESS - The DriverName was found and it's SOR bit was cleared + + EFI_NOT_FOUND - The DriverName does not exist or it's SOR bit was not set. + +--*/ +{ + EFI_LIST_ENTRY *Link; + EFI_CORE_DRIVER_ENTRY *DriverEntry; + + // + // Check every driver + // + for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) { + DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE); + if (DriverEntry->FvHandle == FirmwareVolumeHandle && + DriverEntry->Unrequested && + EfiCompareGuid (DriverName, &DriverEntry->FileName)) { + // + // Move the driver from the Unrequested to the Dependent state + // + CoreAcquireDispatcherLock (); + DriverEntry->Unrequested = FALSE; + DriverEntry->Dependent = TRUE; + CoreReleaseDispatcherLock (); + + return EFI_SUCCESS; + } + } + return EFI_NOT_FOUND; +} + + +EFI_DXESERVICE +EFI_STATUS +EFIAPI +CoreTrust ( + IN EFI_HANDLE FirmwareVolumeHandle, + IN EFI_GUID *DriverName + ) +/*++ + +Routine Description: + + Convert a driver from the Untrused back to the Scheduled state + +Arguments: + + FirmwareVolumeHandle - The handle of the Firmware Volume that contains the firmware + file specified by DriverName. + + DriverName - The Driver name to put in the Scheduled state + +Returns: + + EFI_SUCCESS - The file was found in the untrusted state, and it was promoted + to the trusted state. + + EFI_NOT_FOUND - The file was not found in the untrusted state. + +--*/ +{ + EFI_LIST_ENTRY *Link; + EFI_CORE_DRIVER_ENTRY *DriverEntry; + + // + // Check every driver + // + for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) { + DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE); + if (DriverEntry->FvHandle == FirmwareVolumeHandle && + DriverEntry->Untrusted && + EfiCompareGuid (DriverName, &DriverEntry->FileName)) { + // + // Transition driver from Untrusted to Scheduled state. + // + CoreAcquireDispatcherLock (); + DriverEntry->Untrusted = FALSE; + DriverEntry->Scheduled = TRUE; + InsertTailList (&mScheduledQueue, &DriverEntry->ScheduledLink); + CoreReleaseDispatcherLock (); + + return EFI_SUCCESS; + } + } + return EFI_NOT_FOUND; +} + + +//*** AMI PORTING BEGIN ***// +//PI 1.1 ++ +#if PI_SPECIFICATION_VERSION >= 0x0001000A +/** + An empty function to pass error checking of CreateEventEx (). + + @param Event Event whose notification function is being invoked. + @param Context Pointer to the notification function's context, + which is implementation-dependent. + +**/ +VOID +EFIAPI +EmptyFuntion ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + return; +} +#endif +//PI 1.1 -- +//*** AMI PORTING END *****// + +EFI_DXESERVICE +EFI_STATUS +EFIAPI +CoreDispatcher ( + VOID + ) +/*++ + +Routine Description: + + This is the main Dispatcher for DXE and it exits when there are no more + drivers to run. Drain the mScheduledQueue and load and start a PE + image for each driver. Search the mDiscoveredList to see if any driver can + be placed on the mScheduledQueue. If no drivers are placed on the + mScheduledQueue exit the function. On exit it is assumed the Bds() + will be called, and when the Bds() exits the Dispatcher will be called + again. + +Arguments: + + NONE + +Returns: + + EFI_ALREADY_STARTED - The DXE Dispatcher is already running + + EFI_NOT_FOUND - No DXE Drivers were dispatched + + EFI_SUCCESS - One or more DXE Drivers were dispatched + +--*/ +{ + EFI_STATUS Status; + EFI_STATUS ReturnStatus; + EFI_LIST_ENTRY *Link; + EFI_CORE_DRIVER_ENTRY *DriverEntry; + BOOLEAN ReadyToRun; + UINT8 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE]; + EFI_STATUS_CODE_DATA *StatusCodeData; + EFI_DEVICE_HANDLE_EXTENDED_DATA *DeviceHandleExtData; +//*** AMI PORTING BEGIN ***// +//PI 1.1 ++ +#if PI_SPECIFICATION_VERSION >= 0x0001000A + EFI_EVENT DxeDispatchEvent; +//--------------------------------------- + + Status = CoreCreateEventEx ( + EVT_NOTIFY_SIGNAL, + TPL_NOTIFY, + EmptyFuntion, + NULL, + &gEfiEventDxeDispatchGuid, + &DxeDispatchEvent + ); + if (EFI_ERROR (Status)) { + return Status; + } +#endif +//PI 1.1 -- +//*** AMI PORTING END *****// + + DeviceHandleExtData = (EFI_DEVICE_HANDLE_EXTENDED_DATA *) Buffer; + StatusCodeData = (EFI_STATUS_CODE_DATA *) Buffer; + DeviceHandleExtData->DataHeader.HeaderSize = sizeof (EFI_STATUS_CODE_DATA); + DeviceHandleExtData->DataHeader.Size = + sizeof (EFI_DEVICE_HANDLE_EXTENDED_DATA) - + sizeof (EFI_STATUS_CODE_DATA); + + EfiCommonLibCopyMem ( + &DeviceHandleExtData->DataHeader.Type, + &gEfiStatusCodeSpecificDataGuid, + sizeof (EFI_GUID) + ); + + if (mDispatcherRunning) { + // + // If the dispatcher is running don't let it be restarted. + // + return EFI_ALREADY_STARTED; + } + + mDispatcherRunning = TRUE; + + + ReturnStatus = EFI_NOT_FOUND; + do { + // + // Drain the Scheduled Queue + // + while (!IsListEmpty (&mScheduledQueue)) { + DriverEntry = CR ( + mScheduledQueue.ForwardLink, + EFI_CORE_DRIVER_ENTRY, + ScheduledLink, + EFI_CORE_DRIVER_ENTRY_SIGNATURE + ); + + // + // Load the DXE Driver image into memory. If the Driver was transitioned from + // Untrused to Scheduled it would have already been loaded so we may need to + // skip the LoadImage + // + if (DriverEntry->ImageHandle == NULL) { + Status = CoreLoadImage ( + FALSE, + gDxeCoreImageHandle, + DriverEntry->FvFileDevicePath, + NULL, + 0, + &DriverEntry->ImageHandle + ); + + // + // Update the driver state to reflect that it's been loaded + // + if (EFI_ERROR (Status)) { + CoreAcquireDispatcherLock (); + + if (Status == EFI_SECURITY_VIOLATION) { + // + // Take driver from Scheduled to Untrused state + // + DriverEntry->Untrusted = TRUE; + } else { + // + // The DXE Driver could not be loaded, and do not attempt to load or start it again. + // Take driver from Scheduled to Initialized. + // + // This case include the Never Trusted state if EFI_ACCESS_DENIED is returned + // + DriverEntry->Initialized = TRUE; + } + + DriverEntry->Scheduled = FALSE; + RemoveEntryList (&DriverEntry->ScheduledLink); + + CoreReleaseDispatcherLock (); + + // + // If it's an error don't try the StartImage + // + continue; + } + } + + CoreAcquireDispatcherLock (); + + DriverEntry->Scheduled = FALSE; + DriverEntry->Initialized = TRUE; + RemoveEntryList (&DriverEntry->ScheduledLink); + + CoreReleaseDispatcherLock (); + + // + // Report Status Code here to notify drivers has + // been initialized (INIT_BEGIN) + // + EfiCommonLibCopyMem ( + &DeviceHandleExtData->Handle, + &DriverEntry->ImageHandle, + sizeof (EFI_HANDLE) + ); + + CoreReportProgressCodeSpecific (EFI_SOFTWARE_DXE_CORE | EFI_SW_PC_INIT_BEGIN, DriverEntry->ImageHandle); + + Status = CoreStartImage (DriverEntry->ImageHandle, NULL, NULL); + + CoreReportProgressCodeSpecific (EFI_SOFTWARE_DXE_CORE | EFI_SW_PC_INIT_END, DriverEntry->ImageHandle); + + ReturnStatus = EFI_SUCCESS; + } + + // + // Search DriverList for items to place on Scheduled Queue + // + ReadyToRun = FALSE; + for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) { + DriverEntry = CR (Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE); + + if (DriverEntry->DepexProtocolError){ + // + // If Section Extraction Protocol did not let the Depex be read before retry the read + // + Status = CoreGetDepexSectionAndPreProccess (DriverEntry); + } + + if (DriverEntry->Dependent) { + if (CoreIsSchedulable (DriverEntry)) { + CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry); + ReadyToRun = TRUE; + } + } + } +//*** AMI PORTING BEGIN ***// +//PI 1.1 ++ +#if PI_SPECIFICATION_VERSION >= 0x0001000A + // + // Now DXE Dispatcher finished one round of dispatch, signal an event group + // so that SMM Dispatcher get chance to dispatch SMM Drivers which depend + // on UEFI protocols + // + if (!EFI_ERROR (ReturnStatus)) { + CoreSignalEvent (DxeDispatchEvent); + } +#endif +//PI 1.1 -- +//*** AMI PORTING END *****// + } while (ReadyToRun); + + mDispatcherRunning = FALSE; + + return ReturnStatus; +} + + +VOID +CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter ( + IN EFI_CORE_DRIVER_ENTRY *InsertedDriverEntry + ) +/*++ + +Routine Description: + + Insert InsertedDriverEntry onto the mScheduledQueue. To do this you + must add any driver with a before dependency on InsertedDriverEntry first. + You do this by recursively calling this routine. After all the Befores are + processed you can add InsertedDriverEntry to the mScheduledQueue. + Then you can add any driver with an After dependency on InsertedDriverEntry + by recursively calling this routine. + +Arguments: + + InsertedDriverEntry - The driver to insert on the ScheduledLink Queue + +Returns: + + NONE + +--*/ +{ + EFI_LIST_ENTRY *Link; + EFI_CORE_DRIVER_ENTRY *DriverEntry; + + // + // Process Before Dependency + // + for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) { + DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE); + if (DriverEntry->Before && DriverEntry->Dependent) { + if (EfiCompareGuid (&InsertedDriverEntry->FileName, &DriverEntry->BeforeAfterGuid)) { + // + // Recursively process BEFORE + // + CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry); + } + } + } + + // + // Convert driver from Dependent to Scheduled state + // + CoreAcquireDispatcherLock (); + + InsertedDriverEntry->Dependent = FALSE; + InsertedDriverEntry->Scheduled = TRUE; + InsertTailList (&mScheduledQueue, &InsertedDriverEntry->ScheduledLink); + + CoreReleaseDispatcherLock (); + + // + // Process After Dependency + // + for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) { + DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE); + if (DriverEntry->After && DriverEntry->Dependent) { + if (EfiCompareGuid (&InsertedDriverEntry->FileName, &DriverEntry->BeforeAfterGuid)) { + // + // Recursively process AFTER + // + CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry); + } + } + } +} + +#if (PI_SPECIFICATION_VERSION >= 0x00010000) +EFI_STATUS +FileHasBeenProcessed ( + IN EFI_GUID *FileNameGuid + ) +{ + EFI_STATUS Status; + VOID *HobList; + EFI_PHYSICAL_ADDRESS BaseAddress; + UINT64 Length; + EFI_STATUS HobStatus; + EFI_GUID FileName; + // + // First walk hobs and create appropriate FVs. + // + Status = CoreGetConfigTable (&gEfiHobListGuid, &HobList); + // + // Core Needs Firmware Volumes to function + // + ASSERT_EFI_ERROR (Status); + + BaseAddress = 0; + Length = 0; + HobStatus = GetNextFirmwareVolume2Hob ( + &HobList, + &BaseAddress, + &Length, + &FileName + ); + while (!EFI_ERROR (HobStatus)) { + // + // Check if the file has been processed. + // + if (EfiCompareGuid (FileNameGuid, &FileName)) { + return EFI_SUCCESS; + } + HobStatus = GetNextFirmwareVolume2Hob ( + &HobList, + &BaseAddress, + &Length, + &FileName + ); + } + + return EFI_NOT_FOUND; + +} + +#endif + +BOOLEAN +FvHasBeenProcessed ( + IN EFI_HANDLE FvHandle + ) +/*++ + +Routine Description: + + Return TRUE if the Fv has been processed, FALSE if not. + +Arguments: + + FvHandle - The handle of a FV that's being tested + +Returns: + + TRUE - Fv protocol on FvHandle has been processed + + FALSE - Fv protocol on FvHandle has not yet been processed + +--*/ +{ + EFI_LIST_ENTRY *Link; + KNOWN_HANDLE *KnownHandle; + + for (Link = mFvHandleList.ForwardLink; Link != &mFvHandleList; Link = Link->ForwardLink) { + KnownHandle = CR(Link, KNOWN_HANDLE, Link, KNOWN_HANDLE_SIGNATURE); + if (KnownHandle->Handle == FvHandle) { + return TRUE; + } + } + return FALSE; +} + + +VOID +FvIsBeingProcesssed ( + IN EFI_HANDLE FvHandle + ) +/*++ + +Routine Description: + + Remember that Fv protocol on FvHandle has had it's drivers placed on the + mDiscoveredList. This fucntion adds entries on the mFvHandleList. Items are + never removed/freed from the mFvHandleList. + +Arguments: + + FvHandle - The handle of a FV that has been processed + +Returns: + + None + +--*/ +{ + KNOWN_HANDLE *KnownHandle; + + KnownHandle = CoreAllocateBootServicesPool (sizeof (KNOWN_HANDLE)); + ASSERT (KnownHandle != NULL); + + KnownHandle->Signature = KNOWN_HANDLE_SIGNATURE; + KnownHandle->Handle = FvHandle; + InsertTailList (&mFvHandleList, &KnownHandle->Link); +} + + + + +EFI_DEVICE_PATH_PROTOCOL * +CoreFvToDevicePath ( +#if (PI_SPECIFICATION_VERSION < 0x00010000) + IN EFI_FIRMWARE_VOLUME_PROTOCOL *Fv, +#else + IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv, +#endif + IN EFI_HANDLE FvHandle, + IN EFI_GUID *DriverName + ) +/*++ + +Routine Description: + + Convert FvHandle and DriverName into an EFI device path + +Arguments: + + Fv - Fv protocol, needed to read Depex info out of FLASH. + + FvHandle - Handle for Fv, needed in the EFI_CORE_DRIVER_ENTRY so that the + PE image can be read out of the FV at a later time. + + DriverName - Name of driver to add to mDiscoveredList. + +Returns: + + Pointer to device path constructed from FvHandle and DriverName + +--*/ +{ + EFI_STATUS Status; + EFI_DEVICE_PATH_PROTOCOL *FvDevicePath; + EFI_DEVICE_PATH_PROTOCOL *FileNameDevicePath; + + // + // Remember the device path of the FV + // + Status = CoreHandleProtocol (FvHandle, &gEfiDevicePathProtocolGuid, &FvDevicePath); + if (EFI_ERROR (Status)) { + FileNameDevicePath = NULL; + } else { + // + // Build a device path to the file in the FV to pass into gBS->LoadImage + // + CoreInitializeFwVolDevicepathNode (&mFvDevicePath.File, DriverName); + mFvDevicePath.End.Type = EFI_END_ENTIRE_DEVICE_PATH; + mFvDevicePath.End.SubType = END_ENTIRE_DEVICE_PATH_SUBTYPE; + SetDevicePathNodeLength (&mFvDevicePath.End, sizeof (EFI_DEVICE_PATH_PROTOCOL)); + FileNameDevicePath = CoreAppendDevicePath ( + FvDevicePath, + (EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath + ); + } + + return FileNameDevicePath; +} + + + +EFI_STATUS +CoreAddToDriverList ( +#if (PI_SPECIFICATION_VERSION < 0x00010000) + IN EFI_FIRMWARE_VOLUME_PROTOCOL *Fv, +#else + IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv, +#endif + IN EFI_HANDLE FvHandle, + IN EFI_GUID *DriverName + ) +/*++ + +Routine Description: + + Add an entry to the mDiscoveredList. Allocate memory to store the DriverEntry, + and initilize any state variables. Read the Depex from the FV and store it + in DriverEntry. Pre-process the Depex to set the SOR, Before and After state. + The Discovered list is never free'ed and contains booleans that represent the + other possible DXE driver states. + +Arguments: + + Fv - Fv protocol, needed to read Depex info out of FLASH. + + FvHandle - Handle for Fv, needed in the EFI_CORE_DRIVER_ENTRY so that the + PE image can be read out of the FV at a later time. + + DriverName - Name of driver to add to mDiscoveredList. + +Returns: + + EFI_SUCCESS - If driver was added to the mDiscoveredList. + + EFI_ALREADY_STARTED - The driver has already been started. Only one DriverName + may be active in the system at any one time. + +--*/ +{ + EFI_CORE_DRIVER_ENTRY *DriverEntry; + + + // + // Create the Driver Entry for the list. ZeroPool initializes lots of variables to + // NULL or FALSE. + // + DriverEntry = CoreAllocateZeroBootServicesPool (sizeof (EFI_CORE_DRIVER_ENTRY)); + ASSERT (DriverEntry != NULL); + + DriverEntry->Signature = EFI_CORE_DRIVER_ENTRY_SIGNATURE; + EfiCommonLibCopyMem (&DriverEntry->FileName, DriverName, sizeof (EFI_GUID)); + DriverEntry->FvHandle = FvHandle; + DriverEntry->Fv = Fv; + DriverEntry->FvFileDevicePath = CoreFvToDevicePath (Fv, FvHandle, DriverName); + + CoreGetDepexSectionAndPreProccess (DriverEntry); + + CoreAcquireDispatcherLock (); + + InsertTailList (&mDiscoveredList, &DriverEntry->Link); + + CoreReleaseDispatcherLock (); + + return EFI_SUCCESS; +} + + + +EFI_STATUS +CoreProcessFvImageFile ( +#if (PI_SPECIFICATION_VERSION < 0x00010000) + IN EFI_FIRMWARE_VOLUME_PROTOCOL *Fv, +#else + IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv, +#endif + IN EFI_HANDLE FvHandle, + IN EFI_GUID *DriverName + ) +/*++ + +Routine Description: + + Get the driver from the FV through driver name, and produce a FVB protocol on FvHandle. + +Arguments: + + Fv - The FIRMWARE_VOLUME protocol installed on the FV. + FvHandle - The handle which FVB protocol installed on. + DriverName - The driver guid specified. + +Returns: + + EFI_OUT_OF_RESOURCES - No enough memory or other resource. + + EFI_VOLUME_CORRUPTED - Corrupted volume. + + EFI_SUCCESS - Function successfully returned. + + +--*/ +{ + EFI_STATUS Status; + EFI_SECTION_TYPE SectionType; + UINT32 AuthenticationStatus; + VOID *Buffer; + UINTN BufferSize; + + // + // Read the first (and only the first) firmware volume section + // + SectionType = EFI_SECTION_FIRMWARE_VOLUME_IMAGE; + Buffer = NULL; + BufferSize = 0; + Status = Fv->ReadSection ( + Fv, + DriverName, + SectionType, + 0, + &Buffer, + &BufferSize, + &AuthenticationStatus + ); + if (!EFI_ERROR (Status)) { + // + // Produce a FVB protocol for the file + // + Status = ProduceFVBProtocolOnBuffer ( + (EFI_PHYSICAL_ADDRESS) (UINTN) Buffer, + (UINT64)BufferSize, + FvHandle, + NULL + ); + } + + if (EFI_ERROR (Status) && (Buffer != NULL)) { + // + // ReadSection or Produce FVB failed, Free data buffer + // + gBS->FreePool (Buffer); + + } + + return Status; +} + + +VOID +EFIAPI +CoreFwVolEventProtocolNotify ( + IN EFI_EVENT Event, + IN VOID *Context + ) +/*++ + +Routine Description: + + Event notification that is fired every time a FV dispatch protocol is added. + More than one protocol may have been added when this event is fired, so you + must loop on CoreLocateHandle () to see how many protocols were added and + do the following to each FV: + + If the Fv has already been processed, skip it. If the Fv has not been + processed then mark it as being processed, as we are about to process it. + + Read the Fv and add any driver in the Fv to the mDiscoveredList.The + mDiscoveredList is never free'ed and contains variables that define + the other states the DXE driver transitions to.. + + While you are at it read the A Priori file into memory. + Place drivers in the A Priori list onto the mScheduledQueue. + +Arguments: + + Event - The Event that is being processed, not used. + + Context - Event Context, not used. + +Returns: + + None + +--*/ +{ + EFI_STATUS Status; + EFI_STATUS GetNextFileStatus; + EFI_STATUS SecurityStatus; + EFI_DEVICE_PATH_PROTOCOL *FvDevicePath; + EFI_HANDLE FvHandle; + UINTN BufferSize; + EFI_GUID NameGuid; + UINTN Key; + EFI_FV_FILETYPE Type; + EFI_FV_FILE_ATTRIBUTES Attributes; + UINTN Size; + EFI_CORE_DRIVER_ENTRY *DriverEntry; + EFI_GUID *AprioriFile; + UINTN AprioriEntryCount; + UINTN Index; + EFI_LIST_ENTRY *Link; + UINT32 AuthenticationStatus; + UINTN SizeOfBuffer; +#if (PI_SPECIFICATION_VERSION < 0x00010000) + EFI_FIRMWARE_VOLUME_PROTOCOL *Fv; +#else + EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv; +#endif + + + while (TRUE) { + BufferSize = sizeof (EFI_HANDLE); + Status = CoreLocateHandle ( + ByRegisterNotify, + NULL, + mFwVolEventRegistration, + &BufferSize, + &FvHandle + ); + if (EFI_ERROR (Status)) { + // + // If no more notification events exit + // + return; + } + + if (FvHasBeenProcessed (FvHandle)) { + // + // This Fv has already been processed so lets skip it! + // + continue; + } + + Status = CoreHandleProtocol (FvHandle, &gEfiFirmwareVolumeDispatchProtocolGuid, &Fv); + if (EFI_ERROR (Status)) { + // + // If no dispatch protocol then skip, but do not marked as being processed as it + // may show up later. + // + continue; + } + + // + // Since we are about to process this Fv mark it as processed. + // + FvIsBeingProcesssed (FvHandle); + + #if (PI_SPECIFICATION_VERSION < 0x00010000) + Status = CoreHandleProtocol (FvHandle, &gEfiFirmwareVolumeProtocolGuid, &Fv); + #else + Status = CoreHandleProtocol (FvHandle, &gEfiFirmwareVolume2ProtocolGuid, &Fv); + #endif + if (EFI_ERROR (Status)) { + // + // The Handle has a FirmwareVolumeDispatch protocol and should also contiain + // a FirmwareVolume protocol thus we should never get here. + // + ASSERT (FALSE); + continue; + } + + Status = CoreHandleProtocol (FvHandle, &gEfiDevicePathProtocolGuid, &FvDevicePath); + if (EFI_ERROR (Status)) { + // + // The Firmware volume doesn't have device path, can't be dispatched. + // + continue; + } + + // + // Evaluate the authentication status of the Firmware Volume through + // Security Architectural Protocol + // + if (gSecurity != NULL) { + SecurityStatus = gSecurity->FileAuthenticationState ( + gSecurity, + 0, + FvDevicePath + ); + if (SecurityStatus != EFI_SUCCESS) { + // + // Security check failed. The firmware volume should not be used for any purpose. + // + continue; + } + } + + // + // Discover Drivers in FV and add them to the Discovered Driver List. + // Process EFI_FV_FILETYPE_DRIVER type and then EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER + // EFI_FV_FILETYPE_DXE_CORE is processed to produce a Loaded Image protocol for the core + // EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE is processed to create a Fvb + // + for (Index = 0; Index < sizeof (mDxeFileTypes)/sizeof (EFI_FV_FILETYPE); Index++) { + // + // Initialize the search key + // + Key = 0; + do { + Type = mDxeFileTypes[Index]; + GetNextFileStatus = Fv->GetNextFile ( + Fv, + &Key, + &Type, + &NameGuid, + &Attributes, + &Size + ); + if (!EFI_ERROR (GetNextFileStatus)) { + if (Type == EFI_FV_FILETYPE_DXE_CORE) { + // + // If this is the DXE core fill in it's DevicePath & DeviceHandle + // + if (gDxeCoreLoadedImage->FilePath == NULL) { + if (EfiCompareGuid (&NameGuid, gDxeCoreFileName)) { + CoreInitializeFwVolDevicepathNode (&mFvDevicePath.File, &NameGuid); + mFvDevicePath.End.Type = EFI_END_ENTIRE_DEVICE_PATH; + mFvDevicePath.End.SubType = END_ENTIRE_DEVICE_PATH_SUBTYPE; + SetDevicePathNodeLength (&mFvDevicePath.End, sizeof (EFI_DEVICE_PATH_PROTOCOL)); + + gDxeCoreLoadedImage->FilePath = CoreDuplicateDevicePath ( + (EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath + ); + gDxeCoreLoadedImage->DeviceHandle = FvHandle; + } + } + } else if (Type == EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE) { + + #if (PI_SPECIFICATION_VERSION >= 0x00010000) + if (FileHasBeenProcessed (&NameGuid) == EFI_SUCCESS) { + // + // Skip over the file which has been processed. + // + continue; + } + + #endif + // + // Found a firmware volume image. Produce a firmware volume block + // protocol for it so it gets dispatched from. This is usually a + // capsule. + // + CoreProcessFvImageFile (Fv, FvHandle, &NameGuid); + } else { + // + // Transition driver from Undiscovered to Discovered state + // + CoreAddToDriverList (Fv, FvHandle, &NameGuid); + } + } + } while (!EFI_ERROR (GetNextFileStatus)); + } + + // + // Read the array of GUIDs from the Apriori file if it is present in the firmware volume + // + AprioriFile = NULL; + Status = Fv->ReadSection ( + Fv, + &gAprioriGuid, + EFI_SECTION_RAW, + 0, + &AprioriFile, + &SizeOfBuffer, + &AuthenticationStatus + ); + if (!EFI_ERROR (Status)) { + AprioriEntryCount = SizeOfBuffer / sizeof (EFI_GUID); + } else { + AprioriEntryCount = 0; + } + + // + // Put drivers on Apriori List on the Scheduled queue. The Discovered List includes + // drivers not in the current FV and these must be skipped since the a priori list + // is only valid for the FV that it resided in. + // + CoreAcquireDispatcherLock (); + + for (Index = 0; Index < AprioriEntryCount; Index++) { + for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) { + DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE); + if (EfiCompareGuid (&DriverEntry->FileName, &AprioriFile[Index]) && + (FvHandle == DriverEntry->FvHandle)) { + DriverEntry->Dependent = FALSE; + DriverEntry->Scheduled = TRUE; + InsertTailList (&mScheduledQueue, &DriverEntry->ScheduledLink); + break; + } + } + } + + CoreReleaseDispatcherLock (); + + // + // Free data allocated by Fv->ReadSection () + // + gBS->FreePool (AprioriFile); + } +} + + +VOID +CoreInitializeDispatcher ( + VOID + ) +/*++ + +Routine Description: + + Initialize the dispatcher. Initialize the notification function that runs when + a FV protocol is added to the system. + +Arguments: + + NONE + +Returns: + + NONE + +--*/ +{ + mFwVolEvent = CoreCreateProtocolNotifyEvent ( + #if (PI_SPECIFICATION_VERSION < 0x00010000) + &gEfiFirmwareVolumeProtocolGuid, + #else + &gEfiFirmwareVolume2ProtocolGuid, + #endif + EFI_TPL_CALLBACK, + CoreFwVolEventProtocolNotify, + NULL, + &mFwVolEventRegistration, + TRUE + ); +} + +// +// Function only used in debug buils +// +DEBUG_CODE ( +VOID +CoreDisplayDiscoveredNotDispatched ( + VOID + ) +/*++ + +Routine Description: + + Traverse the discovered list for any drivers that were discovered but not loaded + because the dependency experessions evaluated to false + +Arguments: + + NONE + +Returns: + + NONE + +--*/ +{ + EFI_LIST_ENTRY *Link; + EFI_CORE_DRIVER_ENTRY *DriverEntry; + + for (Link = mDiscoveredList.ForwardLink;Link !=&mDiscoveredList; Link = Link->ForwardLink) { + DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE); + if (DriverEntry->Dependent) { + DEBUG ((EFI_D_LOAD, "Driver %g was discovered but not loaded!!\n", &DriverEntry->FileName)); + } + } +} +) -- cgit v1.2.3