From b7c51c9cf4864df6aabb99a1ae843becd577237c Mon Sep 17 00:00:00 2001 From: raywu Date: Fri, 15 Jun 2018 00:00:50 +0800 Subject: init. 1AQQW051 --- .../Haswell/Protocol/PiMpService/PiMpService.c | 24 + .../Haswell/Protocol/PiMpService/PiMpService.h | 500 +++++++++++++++++++++ 2 files changed, 524 insertions(+) create mode 100644 ReferenceCode/Haswell/Protocol/PiMpService/PiMpService.c create mode 100644 ReferenceCode/Haswell/Protocol/PiMpService/PiMpService.h (limited to 'ReferenceCode/Haswell/Protocol/PiMpService') diff --git a/ReferenceCode/Haswell/Protocol/PiMpService/PiMpService.c b/ReferenceCode/Haswell/Protocol/PiMpService/PiMpService.c new file mode 100644 index 0000000..c1a65e5 --- /dev/null +++ b/ReferenceCode/Haswell/Protocol/PiMpService/PiMpService.c @@ -0,0 +1,24 @@ +/** @file + GUID Definition for the MP Services Protocol defined in the PI 1.1 spec. + +@copyright + Copyright (c) 2011 - 2012 Intel Corporation. All rights reserved + This software and associated documentation (if any) is furnished + under a license and may only be used or copied in accordance + with the terms of the license. Except as permitted by such + license, no part of this software or documentation may be + reproduced, stored in a retrieval system, or transmitted in any + form or by any means without the express written consent of + Intel Corporation. + + This file contains 'Framework Code' and is licensed as such + under the terms of your license agreement with Intel or your + vendor. This file may not be modified, except as allowed by + additional terms of your license agreement. +**/ +#include "Tiano.h" +#include EFI_PROTOCOL_DEFINITION (PiMpService) + +EFI_GUID gEfiPiMpServiceProtocolGuid = EFI_PI_MP_SERVICES_PROTOCOL_GUID; + +EFI_GUID_STRING(&gEfiPiMpServiceProtocolGuid, "PI MP SERVICE", "PI MP Service Protocol"); diff --git a/ReferenceCode/Haswell/Protocol/PiMpService/PiMpService.h b/ReferenceCode/Haswell/Protocol/PiMpService/PiMpService.h new file mode 100644 index 0000000..1bf33b1 --- /dev/null +++ b/ReferenceCode/Haswell/Protocol/PiMpService/PiMpService.h @@ -0,0 +1,500 @@ +/** @file + Definitions for the PI MP Services Protocol defined in the PI spec. + +@copyright + Copyright (c) 2011 - 2012 Intel Corporation. All rights reserved + This software and associated documentation (if any) is furnished + under a license and may only be used or copied in accordance + with the terms of the license. Except as permitted by such + license, no part of this software or documentation may be + reproduced, stored in a retrieval system, or transmitted in any + form or by any means without the express written consent of + Intel Corporation. + + This file contains 'Framework Code' and is licensed as such + under the terms of your license agreement with Intel or your + vendor. This file may not be modified, except as allowed by + additional terms of your license agreement. + +**/ +#ifndef _PI_MP_SERVICES_H_ +#define _PI_MP_SERVICES_H_ + +/// +/// Share some definitions from Framework MP Services Protocol +/// +#include EFI_PROTOCOL_CONSUMER (MpService) + +/// +/// Global ID for the EFI_PI_MP_SERVICES_PROTOCOL. +/// +#define EFI_PI_MP_SERVICES_PROTOCOL_GUID \ + { \ + 0x3fdda605, 0xa76e, 0x4f46, \ + { \ + 0xad, 0x29, 0x12, 0xf4, 0x53, 0x1b, 0x3d, 0x08 \ + } \ + } + +/// +/// Forward declaration for the EFI_PI_MP_SERVICES_PROTOCOL. +/// +typedef struct _EFI_PI_MP_SERVICES_PROTOCOL EFI_PI_MP_SERVICES_PROTOCOL; + +/// +/// Terminator for a list of failed CPUs returned by StartAllAPs(). +/// +#define END_OF_CPU_LIST 0xffffffff + +/// +/// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and +/// indicates whether the processor is playing the role of BSP. If the bit is 1, +/// then the processor is BSP. Otherwise, it is AP. +/// +#define PROCESSOR_AS_BSP_BIT 0x00000001 + +/// +/// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and +/// indicates whether the processor is enabled. If the bit is 1, then the +/// processor is enabled. Otherwise, it is disabled. +/// +#define PROCESSOR_ENABLED_BIT 0x00000002 + +/// +/// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and +/// indicates whether the processor is healthy. If the bit is 1, then the +/// processor is healthy. Otherwise, some fault has been detected for the processor. +/// +#define PROCESSOR_HEALTH_STATUS_BIT 0x00000004 + +/// +/// Structure that describes the pyhiscal location of a logical CPU. +/// +typedef struct { + /// + /// Zero-based physical package number that identifies the cartridge of the processor. + /// + UINT32 Package; + /// + /// Zero-based physical core number within package of the processor. + /// + UINT32 Core; + /// + /// Zero-based logical thread number within core of the processor. + /// + UINT32 Thread; +} EFI_CPU_PHYSICAL_LOCATION; + +/// +/// Structure that describes information about a logical CPU. +/// +typedef struct { + /// + /// The unique processor ID determined by system hardware. For IA32 and X64, + /// the processor ID is the same as the Local APIC ID. Only the lower 8 bits + /// are used, and higher bits are reserved. For IPF, the lower 16 bits contains + /// id/eid, and higher bits are reserved. + /// + UINT64 ProcessorId; + /// + /// Flags indicating if the processor is BSP or AP, if the processor is enabled + /// or disabled, and if the processor is healthy. Bits 3..31 are reserved and + /// must be 0. + /// + /// 
+  /// BSP  ENABLED  HEALTH  Description
+  /// ===  =======  ======  ===================================================
+  ///  0      0       0     Unhealthy Disabled AP.
+  ///  0      0       1     Healthy Disabled AP.
+  ///  0      1       0     Unhealthy Enabled AP.
+  ///  0      1       1     Healthy Enabled AP.
+  ///  1      0       0     Invalid. The BSP can never be in the disabled state.
+  ///  1      0       1     Invalid. The BSP can never be in the disabled state.
+  ///  1      1       0     Unhealthy Enabled BSP.
+  ///  1      1       1     Healthy Enabled BSP.
+  ///
+ /// + UINT32 StatusFlag; + /// + /// The physical location of the processor, including the physical package number + /// that identifies the cartridge, the physical core number within package, and + /// logical thread number within core. + /// + EFI_CPU_PHYSICAL_LOCATION Location; +} EFI_PROCESSOR_INFORMATION; + +/** + This service retrieves the number of logical processor in the platform + and the number of those logical processors that are enabled on this boot. + This service may only be called from the BSP. + + This function is used to retrieve the following information: + - The number of logical processors that are present in the system. + - The number of enabled logical processors in the system at the instant + this call is made. + + Because MP Service Protocol provides services to enable and disable processors + dynamically, the number of enabled logical processors may vary during the + course of a boot session. + + If this service is called from an AP, then EFI_DEVICE_ERROR is returned. + If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then + EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors + is returned in NumberOfProcessors, the number of currently enabled processor + is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned. + + @param[in] This - A pointer to the EFI_MP_SERVICES_PROTOCOL instance. + @param[in] NumberOfProcessors - Pointer to the total number of logical processors in the system, + including the BSP and disabled APs. + @param[in] NumberOfEnabledProcessors - Pointer to the number of enabled logical processors that exist + in system, including the BSP. + + @retval EFI_SUCCESS - Number of logical processors and enabled logical processors retrieved. + @retval EFI_DEVICE_ERROR - Caller processor is AP. + @retval EFI_INVALID_PARAMETER - NumberOfProcessors is NULL. + @retval EFI_INVALID_PARAMETER - NumberOfEnabledProcessors is NULL. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS)( + IN EFI_PI_MP_SERVICES_PROTOCOL *This, + OUT UINTN *NumberOfProcessors, + OUT UINTN *NumberOfEnabledProcessors + ); + +/** + Gets detailed MP-related information on the requested processor at the + instant this call is made. This service may only be called from the BSP. + + This service retrieves detailed MP-related information about any processor + on the platform. Note the following: + - The processor information may change during the course of a boot session. + - The information presented here is entirely MP related. + + Information regarding the number of caches and their sizes, frequency of operation, + slot numbers is all considered platform-related information and is not provided + by this service. + + @param[in] This - A pointer to the EFI_MP_SERVICES_PROTOCOL instance. + @param[in] ProcessorNumber - The handle number of processor. + @param[in] ProcessorInfoBuffer - A pointer to the buffer where information for the requested processor is deposited. + + @retval EFI_SUCCESS - Processor information successfully returned. + @retval EFI_DEVICE_ERROR - Caller processor is AP. + @retval EFI_INVALID_PARAMETER - ProcessorInfoBuffer is NULL + @retval EFI_NOT_FOUND - Processor with the handle specified by ProcessorNumber does not exist. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PI_MP_SERVICES_GET_PROCESSOR_INFO)( + IN EFI_PI_MP_SERVICES_PROTOCOL *This, + IN UINTN ProcessorNumber, + OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer + ); + +/** + This service executes a caller provided function on all enabled APs. APs can + run either simultaneously or one at a time in sequence. This service supports + both blocking and non-blocking requests. The non-blocking requests use EFI + events so the BSP can detect when the APs have finished. This service may only + be called from the BSP. + + This function is used to dispatch all the enabled APs to the function specified + by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned + immediately and Procedure is not started on any AP. + + If SingleThread is TRUE, all the enabled APs execute the function specified by + Procedure one by one, in ascending order of processor handle number. Otherwise, + all the enabled APs execute the function specified by Procedure simultaneously. + + If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all + APs finish or TimeoutInMicroSecs expires. Otherwise, execution is in non-blocking + mode, and the BSP returns from this service without waiting for APs. If a + non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT + is signaled, then EFI_UNSUPPORTED must be returned. + + If the timeout specified by TimeoutInMicroseconds expires before all APs return + from Procedure, then Procedure on the failed APs is terminated. All enabled APs + are always available for further calls to EFI_PI_MP_SERVICES_PROTOCOL.StartupAllAPs() + and EFI_PI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its + content points to the list of processor handle numbers in which Procedure was + terminated. + + Note: It is the responsibility of the consumer of the EFI_PI_MP_SERVICES_PROTOCOL.StartupAllAPs() + to make sure that the nature of the code that is executed on the BSP and the + dispatched APs is well controlled. The MP Services Protocol does not guarantee + that the Procedure function is MP-safe. Hence, the tasks that can be run in + parallel are limited to certain independent tasks and well-controlled exclusive + code. EFI services and protocols may not be called by APs unless otherwise + specified. + + In blocking execution mode, BSP waits until all APs finish or + TimeoutInMicroSeconds expires. + + In non-blocking execution mode, BSP is freed to return to the caller and then + proceed to the next task without having to wait for APs. The following + sequence needs to occur in a non-blocking execution mode: + + -# The caller that intends to use this MP Services Protocol in non-blocking + mode creates WaitEvent by calling the EFI CreateEvent() service. The caller + invokes EFI_PI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent + is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests + the function specified by Procedure to be started on all the enabled APs, + and releases the BSP to continue with other tasks. + -# The caller can use the CheckEvent() and WaitForEvent() services to check + the state of the WaitEvent created in step 1. + -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP + Service signals WaitEvent by calling the EFI SignalEvent() function. If + FailedCpuList is not NULL, its content is available when WaitEvent is + signaled. If all APs returned from Procedure prior to the timeout, then + FailedCpuList is set to NULL. If not all APs return from Procedure before + the timeout, then FailedCpuList is filled in with the list of the failed + APs. The buffer is allocated by MP Service Protocol using AllocatePool(). + It is the caller's responsibility to free the buffer with FreePool() service. + -# This invocation of SignalEvent() function informs the caller that invoked + EFI_PI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed + the specified task or a timeout occurred. The contents of FailedCpuList + can be examined to determine which APs did not complete the specified task + prior to the timeout. + + @param[in] This - A pointer to the EFI_MP_SERVICES_PROTOCOL instance. + @param[in] Procedure - A pointer to the function to be run on enabled APs of the system. + @param[in] SingleThread - Indicates whether to execute the function simultaneously or one by one.. + @param[in] WaitEvent - The event created by the caller. + If it is NULL, then execute in blocking mode. + If it is not NULL, then execute in non-blocking mode. + @param[in] TimeoutInMicrosecsond - The time limit in microseconds for this AP to finish the function. + Zero means infinity. + @param[in] ProcArgument - Pointer to the optional parameter of the assigned function. + @param[in] FailedCpuList - The list of processor numbers that fail to finish the function before + TimeoutInMicrosecsond expires. + + @retval EFI_SUCCESS - In blocking mode, all APs have finished before the timeout expired. + @retval EFI_SUCCESS - In non-blocking mode, function has been dispatched to all enabled APs. + @retval EFI_DEVICE_ERROR - Caller processor is AP. + @retval EFI_NOT_STARTED - No enabled AP exists in the system. + @retval EFI_NOT_READY - Any enabled AP is busy. + @retval EFI_TIMEOUT - In blocking mode, The timeout expired before all enabled APs have finished. + @retval EFI_INVALID_PARAMETER - Procedure is NULL. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PI_MP_SERVICES_STARTUP_ALL_APS)( + IN EFI_PI_MP_SERVICES_PROTOCOL *This, + IN EFI_AP_PROCEDURE Procedure, + IN BOOLEAN SingleThread, + IN EFI_EVENT WaitEvent OPTIONAL, + IN UINTN TimeoutInMicroSeconds, + IN VOID *ProcedureArgument OPTIONAL, + OUT UINTN **FailedCpuList OPTIONAL + ); + +/** + This service lets the caller get one enabled AP to execute a caller-provided + function. The caller can request the BSP to either wait for the completion + of the AP or just proceed with the next task by using the EFI event mechanism. + See EFI_PI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking + execution support. This service may only be called from the BSP. + + This function is used to dispatch one enabled AP to the function specified by + Procedure passing in the argument specified by ProcedureArgument. If WaitEvent + is NULL, execution is in blocking mode. The BSP waits until the AP finishes or + TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode. + BSP proceeds to the next task without waiting for the AP. If a non-blocking mode + is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, + then EFI_UNSUPPORTED must be returned. + + If the timeout specified by TimeoutInMicroseconds expires before the AP returns + from Procedure, then execution of Procedure by the AP is terminated. The AP is + available for subsequent calls to EFI_PI_MP_SERVICES_PROTOCOL.StartupAllAPs() and + EFI_PI_MP_SERVICES_PROTOCOL.StartupThisAP(). + + @param[in] This - A pointer to the EFI_MP_SERVICES_PROTOCOL instance. + @param[in] Procedure - A pointer to the function to be run on the designated AP. + @param[in] ProcessorNumber - The handle number of AP.. + @param[in] WaitEvent - The event created by the caller. + If it is NULL, then execute in blocking mode. + If it is not NULL, then execute in non-blocking mode. + @param[in] TimeoutInMicroseconds - The time limit in microseconds for this AP to finish the function. + Zero means infinity. + @param[in] ProcArgument - Pointer to the optional parameter of the assigned function. + @param[in] Finished - Indicates whether AP has finished assigned function. + In blocking mode, it is ignored. + + @retval EFI_SUCCESS - In blocking mode, specified AP has finished before the timeout expires. + @retval EFI_SUCCESS - In non-blocking mode, function has been dispatched to specified AP. + @retval EFI_DEVICE_ERROR - Caller processor is AP. + @retval EFI_TIMEOUT - In blocking mode, the timeout expires before specified AP has finished. + @retval EFI_NOT_READY - Specified AP is busy. + @retval EFI_NOT_FOUND - Processor with the handle specified by ProcessorNumber does not exist. + @retval EFI_INVALID_PARAMETER - ProcessorNumber specifies the BSP or disabled AP. + @retval EFI_INVALID_PARAMETER - Procedure is NULL. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PI_MP_SERVICES_STARTUP_THIS_AP)( + IN EFI_PI_MP_SERVICES_PROTOCOL *This, + IN EFI_AP_PROCEDURE Procedure, + IN UINTN ProcessorNumber, + IN EFI_EVENT WaitEvent OPTIONAL, + IN UINTN TimeoutInMicroseconds, + IN VOID *ProcedureArgument OPTIONAL, + OUT BOOLEAN *Finished OPTIONAL + ); + +/** + This service switches the requested AP to be the BSP from that point onward. + This service changes the BSP for all purposes. This call can only be performed + by the current BSP. + + This service switches the requested AP to be the BSP from that point onward. + This service changes the BSP for all purposes. The new BSP can take over the + execution of the old BSP and continue seamlessly from where the old one left + off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT + is signaled. + + If the BSP cannot be switched prior to the return from this service, then + EFI_UNSUPPORTED must be returned. + + @param[in] This - A pointer to the EFI_MP_SERVICES_PROTOCOL instance. + @param[in] ProcessorNumber - The handle number of processor. + @param[in] EnableOldBSP - Whether to enable or disable the original BSP. + + @retval EFI_SUCCESS - BSP successfully switched. + @retval EFI_DEVICE_ERROR - Caller processor is AP. + @retval EFI_NOT_FOUND - Processor with the handle specified by ProcessorNumber does not exist. + @retval EFI_INVALID_PARAMETER - ProcessorNumber specifies the BSP or disabled AP. + @retval EFI_NOT_READY - Specified AP is busy. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PI_MP_SERVICES_SWITCH_BSP)( + IN EFI_PI_MP_SERVICES_PROTOCOL *This, + IN UINTN ProcessorNumber, + IN BOOLEAN EnableOldBSP + ); + +/** + This service lets the caller enable or disable an AP from this point onward. + This service may only be called from the BSP. + + This service allows the caller enable or disable an AP from this point onward. + The caller can optionally specify the health status of the AP by Health. If + an AP is being disabled, then the state of the disabled AP is implementation + dependent. If an AP is enabled, then the implementation must guarantee that a + complete initialization sequence is performed on the AP, so the AP is in a state + that is compatible with an MP operating system. This service may not be supported + after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled. + + If the enable or disable AP operation cannot be completed prior to the return + from this service, then EFI_UNSUPPORTED must be returned. + + @param[in] This - A pointer to the EFI_MP_SERVICES_PROTOCOL instance. + @param[in] ProcessorNumber - The handle number of processor. + @param[in] EnableAP - Indicates whether the newstate of the AP is enabled or disabled. + @param[in] HealthFlag - Indicates new health state of the AP.. + + @retval EFI_SUCCESS - AP successfully enabled or disabled. + @retval EFI_DEVICE_ERROR - Caller processor is AP. + @retval EFI_NOT_FOUND - Processor with the handle specified by ProcessorNumber does not exist. + @retval EFI_INVALID_PARAMETERS - ProcessorNumber specifies the BSP. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PI_MP_SERVICES_ENABLEDISABLEAP)( + IN EFI_PI_MP_SERVICES_PROTOCOL *This, + IN UINTN ProcessorNumber, + IN BOOLEAN EnableAP, + IN UINT32 *HealthFlag OPTIONAL + ); + +/** + This return the handle number for the calling processor. This service may be + called from the BSP and APs. + + This service returns the processor handle number for the calling processor. + The returned value is in the range from 0 to the total number of logical + processors minus 1. The total number of logical processors can be retrieved + with EFI_PI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be + called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER + is returned. Otherwise, the current processors handle number is returned in + ProcessorNumber, and EFI_SUCCESS is returned. + + @param[in] This - A pointer to the EFI_MP_SERVICES_PROTOCOL instance. + @param[in] ProcessorNumber - Pointer to the handle number of AP. + + @retval EFI_SUCCESS - Processor number successfully returned. + @retval EFI_INVALID_PARAMETER - ProcessorNumber is NULL +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PI_MP_SERVICES_WHOAMI)( + IN EFI_PI_MP_SERVICES_PROTOCOL *This, + OUT UINTN *ProcessorNumber + ); + +/// +/// When installed, the MP Services Protocol produces a collection of services +/// that are needed for MP management. +/// +/// Before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, the module +/// that produces this protocol is required to place all APs into an idle state +/// whenever the APs are disabled or the APs are not executing code as requested +/// through the StartupAllAPs() or StartupThisAP() services. The idle state of +/// an AP before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled is +/// implementation dependent. +/// +/// After the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, all the APs +/// must be placed in the OS compatible CPU state as defined by the UEFI +/// Specification. Implementations of this protocol may use the UEFI event +/// EFI_EVENT_GROUP_READY_TO_BOOT to force APs into the OS compatible state as +/// defined by the UEFI Specification. Modules that use this protocol must +/// guarantee that all non-blocking mode requests on all APs have been completed +/// before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled. Since the +/// order that event notification functions in the same event group are executed +/// is not deterministic, an event of type EFI_EVENT_GROUP_READY_TO_BOOT cannot +/// be used to guarantee that APs have completed their non-blocking mode requests. +/// +/// When the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, the StartAllAPs() +/// and StartupThisAp() services must no longer support non-blocking mode requests. +/// The support for SwitchBSP() and EnableDisableAP() may no longer be supported +/// after this event is signaled. Since UEFI Applications and UEFI OS Loaders +/// execute after the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, these +/// UEFI images must be aware that the functionality of this protocol may be reduced. +/// +struct _EFI_PI_MP_SERVICES_PROTOCOL { + /// + /// This service retrieves the number of logical processor in the platform and the number of those logical + /// processors that are enabled on this boot. This service may only be called from the BSP. + /// + EFI_PI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS GetNumberOfProcessors; + /// + /// This service retrieves detailed MP-related information about any processor on the platform. + /// + EFI_PI_MP_SERVICES_GET_PROCESSOR_INFO GetProcessorInfo; + /// + /// This service executes a caller provided function on all enabled APs. + /// + EFI_PI_MP_SERVICES_STARTUP_ALL_APS StartupAllAPs; + /// + /// This service lets the caller get one enabled AP to execute a caller-provided function. + /// + EFI_PI_MP_SERVICES_STARTUP_THIS_AP StartupThisAP; + /// + /// This service switches the requested AP to be the BSP from that point onward. + /// + EFI_PI_MP_SERVICES_SWITCH_BSP SwitchBSP; + /// + /// This service lets the caller enable or disable an AP from this point onward. This service may only be + /// called from the BSP. + /// + EFI_PI_MP_SERVICES_ENABLEDISABLEAP EnableDisableAP; + /// + /// This return the handle number for the calling processor. This service may be called from the BSP and APs. + /// + EFI_PI_MP_SERVICES_WHOAMI WhoAmI; +}; + +extern EFI_GUID gEfiPiMpServiceProtocolGuid; + +#endif -- cgit v1.2.3