TOKEN
	Name  = "CORE_MAJOR_VERSION"
	Value  = "4"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "CORE_MINOR_VERSION"
	Value  = "6"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "CORE_REVISION"
	Value  = "5"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "CORE_BUILD_NUMBER"
	Value  = "4"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "CORE_COMBINED_VERSION"
	Value  = "$(CORE_MAJOR_VERSION)*65536+$(CORE_MINOR_VERSION)*100+$(CORE_REVISION)*10+$(CORE_BUILD_NUMBER)"
	Help  = "The token value is an aggregation of all core version tokens into a single integer."
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
	Lock = Yes
End

TOKEN
	Name  = "CORE_VENDOR"
	Value  = "American Megatrends"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "DEBUG_MODE"
	Value  = "0"
	Help  = "Main switch to control debugging features.\If this switch is set to off, all debugging capabilities are disabled.\If this switch is set to on, the following SDL tokens can be used to fine-tune debugging capabilities:\OPTIMIZATION, DEBUG_CODE, DEBUG_INFO."
	TokenType = Boolean
	TargetMAK = Yes
	Range  = "0 - 1"
End

TOKEN
	Name  = "OPTIMIZATION"
	Value  = "0"
	Help  = "Once DEBUG_MODE is on, this swtich is used to control compiler and linker optimization.\If DEBUG_MODE is set to off, this switch is ignored and optimization is enabled."
	TokenType = Boolean
	TargetMAK = Yes
	Token = "DEBUG_MODE" "=" "1"
End

TOKEN
	Name  = "DEBUG_INFO"
	Value  = "1"
	Help  = "Once DEBUG_MODE is on, this swtich is used to control generation of the debugging information.\Debug information is used by Debuggers to provide source level debugging capability. \If DEBUG_MODE is set to off, this switch is ignored and generation of the  debugging information is disabled."
	TokenType = Boolean
	TargetMAK = Yes
	Token = "DEBUG_MODE" "=" "1"
End

TOKEN
	Name  = "DEBUG_CODE"
	Value  = "1"
	Help  = "Once DEBUG_MODE is on, this swtich is used to enable or disable debugging code\such as debugging messages, assert statements, and any code enclosed into #ifdef EFI_DEBUG ... #endif.\If DEBUG_MODE is set to off, this switch is ignored and debugging code is disabled."
	TokenType = Boolean
	TargetMAK = Yes
	Token = "DEBUG_MODE" "=" "1"
End

TOKEN
	Name  = "INDEPENDENT_PEI_DEBUG_SETTINGS"
	Value  = "0"
	Help  = "If DEBUG_MODE is set to off, this switch is ignored and all debugging capabilities are disabled.\If this switch is set to on, an independent set of debug settings can be defined for PEI modules.\If this switch is set to on, the following SDL tokens can be used to fine-tune PEI debugging capabilities:\PEI_OPTIMIZATION, PEI_DEBUG_CODE, PEI_DEBUG_INFO.\"
	TokenType = Boolean
	TargetMAK = Yes
	Range  = "0-1"
	Token = "DEBUG_MODE" "=" "1"
End

TOKEN
	Name  = "PEI_OPTIMIZATION"
	Value  = "0"
	Help  = "Applies to PEI modules only.\Once INDEPENDENT_PEI_DEBUG_SETTINGS is on, this swtich is used to control compiler and linker optimization for PEI modules\If INDEPENDENT_PEI_DEBUG_SETTINGS is set to off, this switch is ignored and OPTIMIZATION switch is used instead."
	TokenType = Boolean
	TargetMAK = Yes
	Token = "INDEPENDENT_PEI_DEBUG_SETTINGS" "=" "1"
End

TOKEN
	Name  = "PEI_DEBUG_INFO"
	Value  = "1"
	Help  = "Applies to PEI modules only.\Once INDEPENDENT_PEI_DEBUG_SETTINGS is on, this swtich is used to control generation of the debugging information for PEI modules.\Debug information is used by Debuggers to provide source level debugging capability. \If INDEPENDENT_PEI_DEBUG_SETTINGS is set to off, this switch is ignored and DEBUG_INFO switch is used instead."
	TokenType = Boolean
	TargetMAK = Yes
	Token = "INDEPENDENT_PEI_DEBUG_SETTINGS" "=" "1"
End

TOKEN
	Name  = "PEI_DEBUG_CODE"
	Value  = "1"
	Help  = "Applies to PEI modules only.\Once INDEPENDENT_PEI_DEBUG_SETTINGS is on, this swtich is used to enable or disable debugging code\such as debugging messages, assert statements, and any code enclosed into #ifdef EFI_DEBUG ... #endif.\If INDEPENDENT_PEI_DEBUG_SETTINGS is set to off, this switch is ignored and DEBUG_CODE switch is used instead."
	TokenType = Boolean
	TargetMAK = Yes
	Token = "INDEPENDENT_PEI_DEBUG_SETTINGS" "=" "1"
End

TOKEN
	Name  = "SELECTIVE_DEBUGGING_SUPPORT"
	Value  = "0"
	Help  = "If DEBUG_MODE is set to off, this switch is ignored and all debugging capabilities are disabled.\Enables/disables selective debugging support.\Selective debugging provides a capability to specify independent set of debug settings for a group of modules defined by SELECTIVE_DEBUGGING eLink.\SELECTIVE_DEBUGGING eLink defines list of module RefNames.\If this switch is set to on, the following SDL tokens can be used to fine-tune selective debugging capabilities:\SELECTIVE_OPTIMIZATION, SELECTIVE_DEBUG_CODE, SELECTIVE_DEBUG_INFO\"
	TokenType = Boolean
	TargetMAK = Yes
	Range  = "0-1"
	Token = "DEBUG_MODE" "=" "1"
End

TOKEN
	Name  = "SELECTIVE_OPTIMIZATION"
	Value  = "0"
	Help  = "Once SELECTIVE_DEBUGGING_SUPPORT is on, this swtich is used to control compiler and linker optimization \for modules from the SELECTIVE_DEBUGGING list.\"
	TokenType = Boolean
	TargetMAK = Yes
	Token = "SELECTIVE_DEBUGGING_SUPPORT" "=" "1"
End

TOKEN
	Name  = "SELECTIVE_DEBUG_INFO"
	Value  = "1"
	Help  = "Once SELECTIVE_DEBUGGING_SUPPORT is on, this swtich is used to control generation of the debugging information\for modules from the SELECTIVE_DEBUGGING list.\Debug information is used by Debuggers to provide source level debugging capability. "
	TokenType = Boolean
	TargetMAK = Yes
	Token = "SELECTIVE_DEBUGGING_SUPPORT" "=" "1"
End

TOKEN
	Name  = "SELECTIVE_DEBUG_CODE"
	Value  = "1"
	Help  = "Once SELECTIVE_DEBUGGING_SUPPORT is on, this swtich is used to enable or disable debugging code\such as debugging messages, assert statements, and any code enclosed into #ifdef EFI_DEBUG ... #endif\for modules from the SELECTIVE_DEBUGGING list."
	TokenType = Boolean
	TargetMAK = Yes
	Token = "SELECTIVE_DEBUGGING_SUPPORT" "=" "1"
End

TOKEN
	Name  = "BRIEF"
	Value  = "1"
	Help  = "Brief build mode."
	TokenType = Boolean
	TargetMAK = Yes
End

TOKEN
	Name  = "EMBEDDED_RESOURCES"
	Value  = "0"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "CREATE_UI_SECTION"
	Value  = "1"
	Help  = "Setting of this switch to on enables generation of UI section for every FFS file. \The UI section has a Unicode representation of the FFS file name."
	TokenType = Boolean
	TargetMAK = Yes
End

TOKEN
	Name  = "EFI_SPECIFICATION_VERSION"
	Value  = "0x2000A"
	Help  = "version of the supported EFI/UEFI specification:\0x2000A - UEFI 2.1\0x20014 - UEFI 2.2\0x2001E - UEFI 2.3\0x2001F - UEFI 2.3.1"
	TokenType = Integer
	TargetMAK = Yes
	Range  = "0x2000A, 0x20014, 0x2001E, 0x2001F"
End

TOKEN
	Name  = "PI_SPECIFICATION_VERSION"
	Value  = "0x0005B"
	Help  = "version of the PI specification supported:\0x0005B - PI 0.91\0x10000 - PI 1.0\0x1000A - PI 1.1\0x10014 - PI 1.2"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	Range  = "0x0005B, 0x10000, 0x1000A, 0x10014"
End

TOKEN
	Name  = "CJK_CHARACTERS_SUPPORT"
	Value  = "0"
	Help  = "Enables/Disables build process support for the Chinese/Japanese/Korean characters.\Since these languages are not alphabet-based, it is impossible to include glyphs for all the language characters. Only characters used in the project are included for these languages. \Extra build steps required to detect, which characters are used.\This token is created to remove build time overhead, when this is not needed.\"
	TokenType = Boolean
	TargetMAK = Yes
End

TOKEN
	Name  = "LANGUAGE_FONT_LIST"
	Value  = "drawing $(SUPPORTED_LANGUAGES)"
	Help  = "Space separated list of language identifiers. \The fonts for these languages will be included into the ROM image."
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "FONT_TOOL_HII_FORMAT_SWITCH"
	Value  = "/F 2.1"
	TokenType = Expression
	TargetMAK = Yes
	Token = "EFI_SPECIFICATION_VERSION" ">" "0x20000"
End

TOKEN
	Name  = "STRING_PACK_POST_PROCESS_COMMAND"
	Value  = "$(FONT_TOOL) $(FONT_TOOL_HII_FORMAT_SWITCH) /P $(BUILD_DIR)\$(NAME)Str.hpk /T $(BUILD_DIR)\font.tmp"
	Help  = "The token defines command used in rules.mak to perform additional processing \of module's HII string pack ($(BUILD_DIR)$(NAME)Str.hpk) \after standard processing (performed by StrGather utility) is completed."
	TokenType = Expression
	TargetMAK = Yes
	Token = "CJK_CHARACTERS_SUPPORT" "=" "1"
End

TOKEN
	Name  = "ISA_IRQ_MASK"
	Value  = "0xE305"
	Help  = "This is an IRQ mask which may be used by ISA devices\ If BIT == 0 IRQ Available BIT == 1 IRQ Used.\DEFAULT VALUE == 0xE305."
	TokenType = Integer
	TargetH = Yes
	Range  = "0...0FFFFh"
End

TOKEN
	Name  = "ISA_DMA_MASK"
	Value  = "0x10"
	Help  = "This is DEFAULT mask of ISA DMA channels which may be used by ISA devices.\Set BIT=1 means Channel CAN NOT be used, Reset BIT=0 means Channel is AVAILABLE.\Channel 4 of ISA DMA controller is tacken for CASCADE DMA channel. \All the rest are available."
	TokenType = Integer
	TargetH = Yes
	Range  = "0...0EFh"
End

TOKEN
	Name  = "KBC_SUPPORT"
	Value  = "1"
	Help  = "Enable/Disable KBC support"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
	Token = "SIO_SUPPORT" "=" "1"
	Token = "ACPI_IA_BOOT_ARCH" "&" "2"
End

TOKEN
	Name  = "FLOPPY_CTRL_SUPPORT"
	Value  = "1"
	Help  = "Switch to enable ISA Floppy Controller support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	Token = "SIO_SUPPORT" "=" "1"
	Token = "ACPI_IA_BOOT_ARCH" "&" "1"
End

TOKEN
	Name  = "TOOL_DIR"
	Value  = "tools"
	Help  = "Tools directory"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "FWIMAGE"
	Value  = "$(SILENT)FwImage"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "ASL"
	Value  = "$(SILENT)asl"
	Help  = "ASL compiler"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "GENDEPEX"
	Value  = "$(SILENT)GENDEPEX"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "GENFFSFILE"
	Value  = "$(SILENT)GENFFSFILE"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "GENFVIMAGE"
	Value  = "GENFVIMAGE"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "GENSECTION"
	Value  = "$(SILENT)GENSECTION /nologo"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "GENTEIMAGE"
	Value  = "$(SILENT)GENTEIMAGE"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "PEIREBASE"
	Value  = "$(SILENT)PEIREBASE"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "STRGATHER"
	Value  = "STRGATHER"
	TokenType = Expression
	TargetMAK = Yes
	Token = "EFI_SPECIFICATION_VERSION" "<=" "0x20000"
End

TOKEN
	Name  = "VFRCOMPILE"
	Value  = "$(SILENT)VFRCOMPILE"
	TokenType = Expression
	TargetMAK = Yes
	Token = "EFI_SPECIFICATION_VERSION" "<=" "0x20000"
End

TOKEN
	Name  = "STRGATHER"
	Value  = "UEFISTRGATHER"
	TokenType = Expression
	TargetMAK = Yes
	Token = "EFI_SPECIFICATION_VERSION" ">" "0x20000"
End

TOKEN
	Name  = "VFRCOMPILE"
	Value  = "$(SILENT)UEFIVFRCOMPILE"
	TokenType = Expression
	TargetMAK = Yes
	Token = "EFI_SPECIFICATION_VERSION" ">" "0x20000"
End

TOKEN
	Name  = "CIF2MAK"
	Value  = "$(SILENT)CIF2MAK /nologo"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "PACKOPROM"
	Value  = "$(SILENT)PackOpRom /nologo"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "AMIRC"
	Value  = "$(SILENT)AmiRc /nologo"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "VFRID"
	Value  = "$(SILENT)VfrId /nologo"
	TokenType = Integer
	TargetMAK = Yes
End

TOKEN
	Name  = "MAKE"
	Value  = "$(SILENT)NMAKE -NOLOGO -R"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "CC"
	Value  = "$(SILENT)CL"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "CP"
	Value  = "$(SILENT)CL /nologo /EP"
	Help  = "C preprocessor"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "LINK"
	Value  = "$(SILENT)LINK"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "ASM"
	Value  = "$(SILENT)ML"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "ASM16"
	Value  = "$(SILENT)ML"
	TokenType = Integer
	TargetMAK = Yes
End

TOKEN
	Name  = "LIBEXE"
	Value  = "$(SILENT)LINK /LIB"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "ASMLINK"
	Value  = "$(SILENT)LINK16"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "PEIDEBUGFIXUP"
	Value  = "$(SILENT)PEIDEBUGFIXUP"
	Help  = "This is the tool responsible for patching the FV_BB \by replacing the address of PEI core entry point with \the address of PEI Debugger entry point, so that the \control can be given to PEI debugger"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "EFI_APRIORI_GUID"
	Value  = "FC510EE7-FFDC-11D4-BD41-0080C73C8881"
	Help  = "GUID used to identify 'a priori' file within the Firmware Volume"
	TokenType = Expression
	TargetMAK = Yes
	Range  = "GUID"
End

TOKEN
	Name  = "MERGE"
	Value  = "MERGE64"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "FWBUILD"
	Value  = "$(SILENT)FWBUILD"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "ECHO"
	Value  = "$(SILENT)echo"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "DEL"
	Value  = "$(SILENT)del"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "SILENT"
	Value  = "@"
	TokenType = Expression
	TargetMAK = Yes
	Token = "BRIEF" "=" "1"
End

TOKEN
	Name  = "SILENT_OUT"
	Value  = "> NUL"
	TokenType = Expression
	TargetMAK = Yes
	Token = "BRIEF" "=" "1"
End

TOKEN
	Name  = "DBG"
	Value  = "Dbg"
	TokenType = Expression
	TargetMAK = Yes
	Token = "DEBUG_MODE" "!=" "0"
End

TOKEN
	Name  = "ARCH"
	Value  = "x64"
	TokenType = Expression
	TargetMAK = Yes
	Token = "x64_BUILD" "=" "1"
End

TOKEN
	Name  = "FONT_TOOL"
	Value  = "$(SILENT)FontTool"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "NV_SIMULATION"
	Value  = "0"
	Help  = "Debug Switch. When the switch is on, NVRAM\variables are not stored in NVRAM"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "NVRAM_HEADER_SIZE"
	Value  = "96"
	Help  = "Size of NVRAM header, which is number of bytes from\the NVRAM_ADDRESS to the first variable record.\Currently defined as:\72(FV Header Size) + 24 (FFS File Header Size)"
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
	Lock = Yes
	Range  = "0-NVRAM_SIZE-1"
End

TOKEN
	Name  = "MANUFACTURING_MODE_SUPPORT"
	Value  = "0"
	Help  = "When enabled adds support for manufactoring mode.\NVRAM image generated during build process will contain manufactoring defaults for variables used in Setup."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "FAULT_TOLERANT_NVRAM_UPDATE"
	Value  = "0"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "BEEP_ENABLE"
	Value  = "1"
	Help  = "This flag enables/disables all firmware beeps"
	TokenType = Boolean
End

TOKEN
	Name  = "USE_CC_RESPONSE_FILE"
	Value  = "0"
	Help  = "When this option is enabled, all C-compiler(CC) options are passed via the response file.\Enable when the length of the CC command line exceeds maximum supported limit.\"
	TokenType = Boolean
	TargetMAK = Yes
End

TOKEN
	Name  = "USE_CP_RESPONSE_FILE"
	Value  = "0"
	Help  = "When this option is enabled, all C-preprocessor(CP) options are passed via the response file.\Enable when the length of the CP command line exceeds maximum supported limit.\"
	TokenType = Boolean
	TargetMAK = Yes
End

TOKEN
	Name  = "USE_LINKER_RESPONSE_FILE"
	Value  = "0"
	Help  = "When this option is enabled, all linker options are passed via the response file.\Enable when the length of the linker command line exceeds maximum supported limit.\"
	TokenType = Boolean
	TargetMAK = Yes
End

TOKEN
	Name  = "GENERATE_CC_LISTING_FILE"
	Value  = "0"
	Help  = "Enables/disables generation of the assembly listing file."
	TokenType = Boolean
	TargetMAK = Yes
End

TOKEN
	Name  = "TRACE_LEVEL_MASK"
	Value  = "TRACE_ALWAYS"
	Help  = "Defines enabled trace message levels.\The value is a bitwise OR of trace levels defined in AmiLib.h.\TRACE_ALWAYS enables all trace messages.\TRACE_NEVER disables all trace messages.\Has no effect if trace messages are disabled."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_DEFAULTS_IN_FV_MAIN"
	Value  = "1"
	Help  = "When this token is enabled, a copy of setup defaults \will be included into FV_MAIN as an FFS file $(BUILD_DIR)\Defaults.ffs"
	TokenType = Boolean
	TargetMAK = Yes
	Token = "AMITSE_SUPPORT" "=" "1"
End

TOKEN
	Name  = "UART_INPUT_CLOCK"
	Value  = "1843200"
	Help  = "This is an UART input clock. The default value is (24000000/13) = 1843200 MHz"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_DATA_LAYOUT_OVERRIDE_SUPPORT"
	Value  = "0"
	Help  = "This switch enables/disables support of the setup data (SETUP_DATA) structure override.\When this token is disabled (default), the SETUP_DATA definition is generated by the build process based on the content of the project .sd files.\When this token is enabled, the SETUP_DATA definition is provided by the external header defined by the SETUP_DATA_LAYOUT_OVERRIDE_HEADER SDL token\"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_DATA_LAYOUT_OVERRIDE_HEADER"
	Help  = "Name of the project specific header file containing definition of the setup data structure.\The project specific definition replaces generic once when SETUP_DATA_LAYOUT_OVERRIDE_HEADER\token is enabled."
	TokenType = Integer
	TargetMAK = Yes
	Token = "SETUP_DATA_LAYOUT_OVERRIDE_SUPPORT" "=" "1"
End

TOKEN
	Name  = "LZMA_SUPPORT"
	Value  = "0"
	Help  = "Enables/Disables LZMA compression support"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "BUILD_RULES"
	Value  = "$(CORE_DIR)\Rules.mak"
	Help  = "Name of the template file processed by CIF2MAK to generate the make file."
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "CIF2MAK_DEFAULTS"
	Value  = "/r$(BUILD_RULES) /d$(PROJECT_DIR) /o$@ /vPROJECT_DIR /lproject.lfo"
	Help  = "Command line of the CIF2MAK utility."
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "BACKWARD_COMPATIBLE_MODE"
	Value  = "1"
	Help  = "Enables/Disabled backward compatibility definitions in Core header files."
	TokenType = Boolean
End

TOKEN
	Name  = "NO_PI_MP_SERVICES_SUPPORT"
	Value  = "1"
	Help  = "Temporarily added to avoid collision with CPU module"
	TokenType = Boolean
End

TOKEN
	Name  = "ROM_LAYOUT_EX"
	Value  = "$(BUILD_DIR)\RomLayoutEx.bin"
	Help  = "Name of the file used by secure flash module to sign ROM image"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "USE_RECOVERY_IMAGE_ON_FLASH_UPDATE"
	Value  = "1"
	Help  = "If set to 1 system will boot using image provided in recovery capsule"
	TokenType = Boolean
	TargetH = Yes
End

PATH
	Name  = "CORE_DIR"
End

ELINK
	Name  = "FV_MAIN"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "FV_MAIN_NESTED"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "CFLAGS"
	Help  = "command line options of the C compiler"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "/nologo /c /Gy"
	Parent  = "CFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/W3 /WX"
	Parent  = "CFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LFLAGS"
	Help  = "command line options for 32-bit linker"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "/NOLOGO"
	Parent  = "LFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/OPT:REF"
	Parent  = "LFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AFLAGS"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "/nologo /c /Cx"
	Parent  = "AFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/W3 /WX"
	Parent  = "AFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AFLAGS16"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "/nologo /c /omf /Cx"
	Parent  = "AFLAGS16"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/OUT:$@"
	Parent  = "LFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "FV_BB"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "$(CORE_DIR)\FloppyCtrl.ffs"
	Parent  = "FV_BB"
	Token = "FLOPPY_CTRL_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(CORE_DIR)\FileSystem$(ARCH).ffs"
	Parent  = "FV_MAIN"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(BUILD_DIR)\AmiProtocolLib.lib"
	Parent  = "AMIDXELIB"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(BUILD_DIR)\AmiPpiLib.lib"
	Parent  = "AMIPEILIB"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PROCESSOR"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "PROCESSOR_RULES"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "$(BUILD_DIR)\Font.ffs"
	Parent  = "FV_MAIN"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(GLOBAL_DEFINES)"
	Parent  = "CFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(GLOBAL_DEFINES)"
	Parent  = "AFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(GLOBAL_DEFINES)"
	Parent  = "AFLAGS16"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SELECTIVE_DEBUGGING"
	Token = "SELECTIVE_DEBUGGING_SUPPORT" "=" "1"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "/D EFI_SPECIFICATION_VERSION=$(EFI_SPECIFICATION_VERSION)"
	Parent  = "GLOBAL_DEFINES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/D PI_SPECIFICATION_VERSION=$(PI_SPECIFICATION_VERSION)"
	Parent  = "GLOBAL_DEFINES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "GLOBAL_DEFINES"
	Help  = "Global macro definitions. Added to CFLAGS and AFLAGS"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ROM_IMAGE"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "$(FV_BB_DESCRIPTOR)"
	Parent  = "ROM_IMAGE"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(FV_MAIN_DESCRIPTOR)"
	Parent  = "ROM_IMAGE"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(NVRAM_BACKUP_DESCRIPTOR)"
	Parent  = "ROM_IMAGE"
	Token = "FAULT_TOLERANT_NVRAM_UPDATE" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(FV_NVRAM_DESCRIPTOR)"
	Parent  = "ROM_IMAGE"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/NODEFAULTLIB /DLL /ALIGN:32 /IGNORE:4108"
	Parent  = "LFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/SUBSYSTEM:NATIVE"
	Parent  = "LFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(BUILD_DIR)\Defaults.ffs"
	Parent  = "FV_MAIN"
	Token = "SETUP_DEFAULTS_IN_FV_MAIN" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/D BACKWARD_COMPATIBLE_MODE=1"
	Parent  = "GLOBAL_DEFINES"
	Token = "BACKWARD_COMPATIBLE_MODE" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/D NO_PI_MP_SERVICES_SUPPORT=1"
	Parent  = "GLOBAL_DEFINES"
	Token = "NO_PI_MP_SERVICES_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

OUTPUTREGISTER
	Name  = "TOKEN_EQU"
	Path  = "Build"
	File  = "token.equ"
End

OUTPUTREGISTER
	Name  = "TOKEN_H"
	Path  = "Build"
	File  = "token.h"
End

OUTPUTREGISTER
	Name  = "TOKEN_MAK"
	Path  = "Build"
	File  = "token.mak"
End

OUTPUTREGISTER
	Name  = "MODULE_MAK"
	Help  = "list of make files for enabled components"
	Path  = "Build"
	File  = "module.mak"
End

OUTPUTREGISTER
	Name  = "BUSNUM_XLAT"
	Path  = "Build"
	File  = "BusNumXlat.INC"
End

OUTPUTREGISTER
	Name  = "IRQ_ASM"
	Path  = "Build"
	File  = "oempir.inc"
End