TOKEN
	Name  = "StatusCode_SUPPORT"
	Value  = "1"
	Help  = "Main switch to enable Status Code support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	Master = Yes
End

TOKEN
	Name  = "STRING_STATUS_SUPPORT"
	Value  = "1"
	Help  = "Enables/Disables all string-based status code routines \defined by the ReportStringStatus eLink"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SERIAL_STATUS_SUPPORT"
	Value  = "1"
	Help  = "Enables/Disables serail port status code routine"
	TokenType = Boolean
	TargetH = Yes
	Token = "STRING_STATUS_SUPPORT" "=" "1"
	Token = "SIO_SUPPORT" "=" "1"
End

TOKEN
	Name  = "RUNTIME_TRACE_SUPPORT"
	Value  = "1"
	Help  = "Enables/Disables support of trace messages in Runtime"
	TokenType = Boolean
	TargetH = Yes
	Token = "DEBUG_MODE" "!=" "0"
End

TOKEN
	Name  = "DATAHUB_STATUS_SUPPORT"
	Value  = "1"
	Help  = "Enables/Disables logging of the status codes into a data hub"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "CONOUT_CHECKPOINTS_SUPPORT"
	Value  = "1"
	Help  = "Enables/Disables checkpoint display on the ConOut devices\(right bottom corner)"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "CON_OUT_CHECKPOINTS_IN_QUIET_MODE"
	Value  = "1"
	Help  = "Enables/Disables checkpoints display on the ConOut devices\in quiet mode (only in effect when CONOUT_CHECKPOINTS_SUPPORT is enabled)"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "CHECKPOINT_PROGRESS_CODES_MAP"
	Value  = "ProgressCheckpointMap"
	Help  = "Name of the table that establishes mapping between progress codes and checkpoints.\Clone this token to support custom checkpoint lists."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "CHECKPOINT_ERROR_CODES_MAP"
	Value  = "ErrorCheckpointMap"
	Help  = "Name of the table that establishes mapping between error codes and checkpoints.\Clone this token to support custom checkpoint lists."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "BEEP_PROGRESS_CODES_MAP"
	Value  = "ProgressBeepMap"
	Help  = "Name of the table that establishes mapping between progress codes and number of beeps.\Clone this token to support custom beep codes."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "BEEP_ERROR_CODES_MAP"
	Value  = "ErrorBeepMap"
	Help  = "Name of the table that establishes mapping between error codes and number of beeps.\Clone this token to support custom beep codes."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "STATUS_CODE_VERSION"
	Value  = "16"
	Help  = "Version of the status code module."
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
	Lock = Yes
End

PATH
	Name  = "STATUS_CODE_DIR"
End

MODULE
	Help  = "Includes StatusCode.mak to Project"
	File  = "StatusCode.mak"
End

ELINK
	Name  = "StatusCodeInitialize"
	Help  = "This is a list of initialization routines for status code subcomponents. The routines are called during initialization of the StatusCode module\The child eLink can be in one of the following formats:\'InitFunctionName,' - The function will be called in PEI as well as in DXE\'PEI(InitFunctionName),' - The function will only be called in PEI\'DXE(InitFunctionName),' - The function will only be called in DXE\"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ReportSimpleStatus"
	Help  = "This is a list of status code routines that consume only status code type and value. \The child eLink can be in one of the following formats:\'FunctionName,' - The function will be called in PEI as well as in DXE\'PEI(FunctionName),' - The function will only be called in PEI\'DXE(FunctionName),' - The function will only be called in DXE\"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ReportMiscStatus"
	Help  = "This is a list of status code routines that consume all available status code data. \The child eLink can be in one of the following formats:\'FunctionName,' - The function will be called in PEI as well as in DXE\'PEI(FunctionName),' - The function will only be called in PEI\'DXE(FunctionName),' - The function will only be called in DXE\"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "CheckPointStatus,"
	Parent  = "ReportSimpleStatus"
	Help  = "This is a list of checkpoint routines. \The child eLink can be in one of the following formats:\'FunctionName,' - The function will be called in PEI as well as in DXE\'PEI(FunctionName),' - The function will only be called in PEI\'DXE(FunctionName),' - The function will only be called in DXE\"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "RUNTIME(CheckPointStatus),"
	Parent  = "ReportSimpleStatus"
	Help  = "This is a list of checkpoint routines. \The child eLink can be in one of the following formats:\'FunctionName,' - The function will be called in PEI as well as in DXE\'PEI(FunctionName),' - The function will only be called in PEI\'DXE(FunctionName),' - The function will only be called in DXE\"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PeiInitStatusCode,"
	Parent  = "PeiCoreInitialize"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BeepService,"
	Parent  = "ReportMiscStatus"
	Token = "BEEP_ENABLE" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BeepStatus,"
	Parent  = "ReportSimpleStatus"
	Token = "BEEP_ENABLE" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ReportStringStatus"
	Help  = "This is a list of status code routines that consume strings. \The child eLink can be in one of the following formats:\'FunctionName,' - The function will be called in PEI as well as in DXE\'PEI(FunctionName),' - The function will only be called in PEI\'DXE(FunctionName),' - The function will only be called in DXE\"
	Token = "STRING_STATUS_SUPPORT" "=" "1"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ReportCheckpoint"
	Help  = "This is a list of checkpoint display routines. \The child eLink can be in one of the following formats:\'FunctionName,' - The function will be called in PEI as well as in DXE\'PEI(FunctionName),' - The function will only be called in PEI\'DXE(FunctionName),' - The function will only be called in DXE\"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "Port80Checkpoint,"
	Parent  = "ReportCheckpoint"
	Help  = "Port 0x80 checkpoints"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "RUNTIME(Port80Checkpoint),"
	Parent  = "ReportCheckpoint"
	Help  = "Port 0x80 checkpoints"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "DXE(DataHubStatusCode),"
	Parent  = "ReportMiscStatus"
	Help  = "DataHub status code routine (DXE only).\Logs prorgess and error status codes into data hub"
	Token = "DATAHUB_STATUS_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SerialOutput,"
	Parent  = "ReportStringStatus"
	Help  = "Serial port string status code"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "RUNTIME(SerialOutput),"
	Parent  = "ReportStringStatus"
	Help  = "Serial port string status code"
	Token = "SERIAL_STATUS_SUPPORT" "=" "1"
	Token = "RUNTIME_TRACE_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "DXE(ConOutCheckpoint),"
	Parent  = "ReportCheckpoint"
	Help  = "ConOut Checkpoints (DXE only)"
	Token = "CONOUT_CHECKPOINTS_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SerialCheckpoint,"
	Parent  = "ReportCheckpoint"
	Help  = "Checkpoints over Serial Port"
	Token = "SERIAL_STATUS_SUPPORT" "=" "1"
	Disable = Yes
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SerialStatusInit,"
	Parent  = "StatusCodeInitialize"
	Help  = "Serial port status code initialization routine"
	Token = "SERIAL_STATUS_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "DXE(ConOutCpInit),"
	Parent  = "StatusCodeInitialize"
	Help  = "ConOut checkpoints initialization routine (DXE only)"
	Token = "CONOUT_CHECKPOINTS_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "DXE(DataHubInit),"
	Parent  = "StatusCodeInitialize"
	Help  = "DataHub status code initialization routine (DXE only).\Logs prorgess and error status codes into data hub"
	Token = "DATAHUB_STATUS_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PeiErrorCodeActions"
	Help  = "List of actions to perform when error of a particular type is detected in PEI.\The child eLink has the following format: \ERROR_ACTION(Value,Action)\where\Value - error code value (error values are defined in AmiStatusCodes.h)\Action - error action. Function with the following interface:\VOID (ERROR_CODE_ACTION)(\    IN VOID *PeiServices, IN EFI_STATUS_CODE_VALUE Value\);\Custom or standard action can be used.\The following standard actions are defined:\Halt, ResetOrHalt, ResetOrResume\"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "DxeErrorCodeActions"
	Help  = "List of actions to perform when error of a particular type is detected in DXE.\The child eLink has the following format: \ERROR_ACTION(Value,Action)\where\Value - error code value (error values are defined in AmiStatusCodes.h)\Action - error action. Function with the following interface:\VOID (ERROR_CODE_ACTION)(\    IN VOID *PeiServices, IN EFI_STATUS_CODE_VALUE Value\);\Custom or standard action can be used.\The following standard actions are defined:\Halt, ResetOrHalt, ResetOrResume\"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "StatusCodeSmmEntry,"
	Parent  = "RuntimeSmmInitialize"
	InvokeOrder = BeforeParent
End

ELINK
	Name  = "DxeInitStatusCode,"
	Parent  = "DxeCoreInitialize"
	InvokeOrder = BeforeParent
End