path: root/Board/NB/NB.sdl

#*************************************************************************
#*************************************************************************
#**                                                                     **
#**        (C)Copyright 1985-2015, American Megatrends, Inc.            **
#**                                                                     **
#**                       All Rights Reserved.                          **
#**                                                                     **
#**      5555 Oakbrook Parkway, Suite 200, Norcross, GA 30093           **
#**                                                                     **
#**                       Phone: (770)-246-8600                         **
#**                                                                     **
#*************************************************************************
#*************************************************************************
#*************************************************************************
# $Header: /Alaska/BIN/Chipset/Intel/NorthBridge/Haswell/Intel SystemAgent NB Board/NB.sdl 23    7/02/15 2:48a Dennisliu $
#
# $Revision: 23 $
#
# $Date: 7/02/15 2:48a $
#*************************************************************************
# Revision History
# ----------------
# $Log: /Alaska/BIN/Chipset/Intel/NorthBridge/Haswell/Intel SystemAgent NB Board/NB.sdl $
# 
# 23    7/02/15 2:48a Dennisliu
# [TAG]  		EIP221317
# [Category]  	Improvement
# [Description]  	[SharkBay] S3 Security Technical Advisories
# [Files]  		Board\NB\NB.sdl
# 
# 22    11/07/13 3:37a Ireneyang
# [TAG]         None
# [Category]    Improvement
# [Description] Remove "AMI_SA_ECC_DIMM_ERROR" for EIP#138347. 
# [Solution]    It's fixed in RC1.7.0.
# [Files]       NB.sdl; MrcCrosser.c;
# 
# 21    10/29/13 12:04p Ireneyang
# 
# 20    10/29/13 11:55a Ireneyang
# [TAG]         EIP139301
# [Category]    BugFix
# [Description] Hanging issue when moving ECC Dimm form channel B 
#               dimm 1 to channel A dimm 0.
# [Solution]    Fix MRC code form Intel Patch. (This will be fixed
#               in next version RC code.)
# [Files]       MrcCrosser.c; NB.sdl;
# 
# 19    5/22/13 6:42a Ireneyang
# [TAG]         None
# [Category]    Improvement
# [Description] Add Token SG_GPIO_SUPPORT for GpioSupport.
# [Files]       NB.sdl; NBPEI.c;
# 
# 18    3/14/13 4:15a Ireneyang
# [TAG]          None
# [Severity]     Improvement
# [Description]  Increase "PEI_MIN_MEMORY_SIZE" to "0x4000000" for PFAT
#                and Recovery. 
# [Files]        NB.sdl;
# 
# 17    2/25/13 4:25a Ireneyang
# [TAG]  	 EIP115090
# [Category]  	 Improvement
# [Description]  Memory data hasn't been cleared after running MRC base
#                memory test.
# [Files]  	 NB.sdl;  NBPEI.c;
# 
# 16    1/14/13 6:12a Jeffch
# [TAG]          None
# [Severity]     Spec update
# [Description]  Create Iedsize token for  SA RC 0.90.
# [Files]        NB.sdl;
# 
# 15    11/08/12 7:04a Jeffch
# 
# 14    10/30/12 7:17a Jeffch
# [TAG]          None
# [Severity]     Important
# [Description]  Update SA RC 0.72.
# [Files]        NB.sdl; NBDXEboard.c
# 
# 13    10/14/12 11:41a Jeffch
# [TAG]          None
# [Severity]     Important
# [Description]  Follow SA RC 0.71.
# [Files]       Nb.sdl
# 
# 12    10/14/12 12:50a Jeffch
# [TAG]          None
# [Severity]     Important
# [Description]  Follow Update by Mahobay.
# [Files]        NB.sdl, NB.mak.c; NBDXEBoard.c; NB.sdl
# 
# 11    9/26/12 9:28a Yurenlai
# [TAG]          EIP101495
# [Category]     Improvement
# [Severity]     Important
# [Description]  Initialize SSID of B0:D3:F0 and B0:D2:F0/F1.
# [Files]        NB.h, NB.sdl, NBPEI.c
# 
# 10    8/14/12 4:26a Yurenlai
# [TAG]          None
# [Severity]     Important
# [Description]  Change for SystemAgent RefCode Revision: 0.6.1.
# [Files]        NB.sdl, NB.sd, NBCSP.CIF, NBDxe.c, NB.ASL, SaAudio.asl 
# 
# 9     7/27/12 8:46a Yurenlai
# [TAG]          None
# [Category]     Improvement
# [Description]  IGfx Fource Disable Support.
# [Files]        GetSetupData.c, NB.sdl, NB.sd, NB.uni, NbSetupData.h,
#                NBDxe.c, NBPEI.c
# 
# 8     6/14/12 5:19a Yurenlai
# [TAG]          None
# [Category]     Improvement
# [Description]  Support token to disable PEG 0 ~ 2.
# [Description]  NB.sdl, NB.sd, NB.ASL, HOST_BUS.ASL
# 
# 7     4/26/12 3:00a Yurenlai
# [TAG]          None
# [Category]     Improvement
# [Severity]     Important
# [Description]  Adjust Intel System Agent module the Setup item and
#                Policy.
# [Description]  GetSetupData.c, NB.sdl, NB.sd, NB.uni, NBDxe.c,
#                NBPEI.c, NBSetup.c, NBSetupReset.c, NbSetupData.h
# 
# 6     4/05/12 2:15a Yurenlai
# [TAG]  	 EIP87103
# [Category]  	 Spec Update
# [Severity]  	 Important
# [Description]  Add token NB_IOTRAP_SMI_ADDRESSE for SystemAgent
#                RefCode Revision: 0.5.5.
# [Files]  	 Nb.sdl
# 
# 5     4/05/12 2:03a Yurenlai
# [TAG]          None
# [Category]     Improvement
# [Description]  Add HD Audio device router.
# [Files]        Nb.sdl
# 
# 4     3/08/12 10:32p Yurenlai
# [TAG]          None
# [Category]     Improvement
# [Description]  Change VBIOS the files name.
#                Notice : This hsm_Vbios.bin and hsd_Vbios.bin is dummy
#                files.
# [Files]        Nb.sdl, hsm_VBios.bin, hsd_VBios.bin, NBCSP.CIF
# 
# 3     2/23/12 10:14p Yurenlai
# 
# [TAG]          None
# [Category]     Improvement
# [Description]  If you want to test IGD, please replace into correct
#                VBIOS.
# [Files]        Nb.sdl, NBCSP.CIF
# 
# 2     2/23/12 6:57a Yurenlai
# [TAG]          None
# [Category]     Improvement
# [Description]  Change VBIOS the file name.
#                Notice : This hsm_Vbios.dat file is false. 
# [Files]        Nb.sdl, hsm_Vbios.dat, NBCSP.CIF
# 
# 1     2/08/12 4:32a Yurenlai
# Intel Haswell/NB eChipset initially releases.
#
#*************************************************************************
PCIDEVICE
	Title  = "Host Bridge"
	Bus  = 00h
	Dev  = 00h
	Fun  = 00h
	BridgeBus  = 00h
	ASLfile  = "$(INTEL_ACPI_ASL_DIR)\HOST_BUS.ASL"
	ASLdeviceName  = "PCI0"
	DeviceType = OnBoard
	PCIBusSize = PciEx
	PCIBridge = Yes
	ROMMain = No
End

PCIDEVICE
	Title  = "P.E.G. Root Port D1F0"
	Bus  = 00h
	Dev  = 01h
	Fun  = 00h
	BridgeBus  = 02h
	GPEbit  = 09h
	SleepNum  = 04h
	IntA = 	LNKA; 16
	IntB = 	LNKB; 17
	IntC = 	LNKC; 18
	IntD = 	LNKD; 19
	Token = "RC_PEG_0" "=" "1"
	DeviceType = OnBoard
	PCIBusSize = PciEx
	PCIBridge = Yes
End

PCIDEVICE
	Title  = "P.E.G. Root Port D1F1"
	Bus  = 00h
	Dev  = 01h
	Fun  = 01h
	BridgeBus  = 0ah
	GPEbit  = 09h
	SleepNum  = 04h
	Token = "RC_PEG_1" "=" "1"
	DeviceType = OnBoard
	PCIBusSize = PciEx
	PCIBridge = Yes
End

PCIDEVICE
	Title  = "P.E.G. Root Port D1F2"
	Bus  = 00h
	Dev  = 01h
	Fun  = 02h
	BridgeBus  = 0bh
	GPEbit  = 09h
	SleepNum  = 04h
	Token = "RC_PEG_2" "=" "1"
	DeviceType = OnBoard
	PCIBusSize = PciEx
	PCIBridge = Yes
End

PCIDEVICE
	Title  = "P.E.G. Port Slot x16"
	Bus  = 02h
	Dev  = 00h
	Slot  = 010h
	GPEbit  = 09h
	SleepNum  = 04h
	IntA = 	LNKA; 16
	IntB = 	LNKB; 17
	IntC = 	LNKC; 18
	IntD = 	LNKD; 19
	Token = "RC_PEG_0" "=" "1"
	DeviceType = Slot
	PCIBusSize = PciEx
End

PCIDEVICE
	Title  = "P.E.G. Port Slot x8"
	Bus  = 0ah
	Dev  = 00h
	Slot  = 011h
	GPEbit  = 09h
	SleepNum  = 04h
	IntA = 	LNKB; 17
	IntB = 	LNKC; 18
	IntC = 	LNKD; 19
	IntD = 	LNKA; 16
	Token = "RC_PEG_1" "=" "1"
	DeviceType = Slot
	PCIBusSize = PciEx
End

PCIDEVICE
	Title  = "P.E.G. Port Slot x4"
	Bus  = 0bh
	Dev  = 00h
	Slot  = 012h
	GPEbit  = 09h
	SleepNum  = 04h
	IntA = 	LNKC; 18
	IntB = 	LNKD; 19
	IntC = 	LNKA; 16
	IntD = 	LNKB; 17
	Token = "RC_PEG_2" "=" "1"
	DeviceType = Slot
	PCIBusSize = PciEx
End

PCIDEVICE
	Title  = "I.G.F.X."
	Bus  = 00h
	Dev  = 02h
	Fun  = 00h
	ROMFile  = "Chipset\NB\hsw_VBios.dat"
	DeviceID  = 0402h
	VendorID  = 08086h
	IntA = 	LNKA; 16
	DeviceType = OnBoard
	PCIBusSize = 32bit
	OptionROM = Yes
	CompressedROM = Yes
End

PCIDEVICE
	Title  = "I.G.D., Fun#1"
	Bus  = 00h
	Dev  = 02h
	Fun  = 01h
	Disable = Yes
	DeviceType = OnBoard
	PCIBusSize = 32bit
	ROMMain = No
End

PCIDEVICE
	Title  = "SA HDA Device"
	Bus  = 00h
	Dev  = 03h
	Fun  = 00h
	DeviceID  = 0c0ch
	VendorID  = 08086h
	IntA = 	LNKA; 16
	DeviceType = OnBoard
	PCIBusSize = 32bit
End

PCIDEVICE
	Title  = "SA Thermal Device"
	Bus  = 00h
	Dev  = 04h
	Fun  = 00h
	GPEbit  = 09h
	SleepNum  = 04h
	ASLdeviceName  = "B0D4"
	IntA = 	LNKA; 16
	IntB = 	LNKB; 17
	IntC = 	LNKC; 18
	IntD = 	LNKD; 19
	DeviceType = OnBoard
	PCIBusSize = PciEx
	ROMMain = No
End

TOKEN
	Name  = "NB_SUPPORT"
	Value  = "1"
	Help  = "Main switch to enable Template - NorthBridge support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	Master = Yes
End

TOKEN
	Name  = "PEI_MRC_BASE_MEMORY_TEST_ENABLE"
	Value  = "0"
	Help  = "Enable/Disable Mrc base memory test."
	TokenType = Boolean
	TargetH = Yes
	Range  = "On - Off"
End

TOKEN
	Name  = "NB_TEMPLATE_VER"
	Value  = "0005"
	Help  = "North Bridge Template Version Number.\ DO NOT CHANGE THIS VALUE"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
	Lock = Yes
End

TOKEN
	Name  = "NB_NUMBER_OF_HOST_BRG"
	Value  = "1"
	Help  = "Provides Number of virtual HOST Bridges within the System.\If System covers more than one PCI segment it will nedd more than one HOST bridge; "
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "ROOT_BRIDGE_COUNT"
	Value  = "1"
	Help  = "Indicates how many root bridges (peer to peer) are in the system."
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "NB_DEBUG_MESSAGE"
	Value  = "1"
	Help  = "Enables/disables debug message in NB module"
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
	Token = "DEBUG_MODE" "!=" "0"
End

TOKEN
	Name  = "INCLUDE_NB_ASM_FILE_IN_SEC"
	Value  = "1"
	Help  = "Includes an ASM file and an eLink in SEC build process for NB code modification:"
	TokenType = Boolean
End

TOKEN
	Name  = "ENABLE_NB_DMI_GEN2_IN_SEC"
	Value  = "0"
	Help  = "Enabel an NB DMI GEN2 in SEC program."
	TokenType = Boolean
	TargetEQU = Yes
End

TOKEN
	Name  = "NB_IGFX_FORCE_DISABLE_SUPPORT"
	Value  = "0"
	Help  = "Enable/Disable IGfx Fource Disable Support."
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "RC_PEG_0"
	Value  = "1"
	Help  = "Set to 'On' if PEG Port #0  phisically enabled and connected on the board"
	TokenType = Boolean
	TargetH = Yes
	Range  = "On - Off"
End

TOKEN
	Name  = "RC_PEG_1"
	Value  = "1"
	Help  = "Set to 'On' if PEG Port #1  phisically enabled and connected on the board"
	TokenType = Boolean
	TargetH = Yes
	Range  = "On - Off"
	Token = "RC_PEG_0" "=" "1"
End

TOKEN
	Name  = "RC_PEG_2"
	Value  = "1"
	Help  = "Set to 'On' if PEG Port #2  phisically enabled and connected on the board"
	TokenType = Boolean
	TargetH = Yes
	Range  = "On - Off"
	Token = "RC_PEG_0" "=" "1"
	Token = "RC_PEG_1" "=" "1"
End

TOKEN
	Name  = " "
	TokenType = Integer
End

TOKEN
	Name  = "=============== NB Specific Tokens =============="
	TokenType = Expression
End

TOKEN
	Name  = "TSEG_SIZE"
	Value  = "0x800000"
	Help  = "Size of SMM TSEG area used (in bytes) \Default size 1MB."
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "IED_SIZE"
	Value  = "0x400000"
	Help  = "Size of IED region in bytes \Default size 4MB."
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "PCIEX_BASE_ADDRESS"
	Value  = "0xF8000000"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "PEBS"
	Value  = "$(PCIEX_BASE_ADDRESS)"
	TokenType = Integer
	TargetASL = Yes
End

TOKEN
	Name  = "PCIEX_LENGTH"
	Value  = "0x4000000"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
	Range  = "0x4000000, 0x8000000, 0x10000000"
	Token = "PCIEX_BASE_ADDRESS" "=" "0xF8000000"
End

TOKEN
	Name  = "PCIEX_LENGTH"
	Value  = "0x8000000"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
	Range  = "0x4000000, 0x8000000, 0x10000000"
	Token = "PCIEX_BASE_ADDRESS" "=" "0xF0000000"
End

TOKEN
	Name  = "PCIEX_LENGTH"
	Value  = "0x10000000"
	TokenType = Integer
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
	Range  = "0x4000000, 0x8000000, 0x10000000"
	Token = "PCIEX_BASE_ADDRESS" "=" "0xE0000000"
End

TOKEN
	Name  = "PCIEX_LENGTH_BIT_SETTING"
	Value  = "0x4"
	Help  = "PCI 0:0:0:60 PCIEXBAR bits [2:0] - PCI express size, 0x0 is 256MB, 0x2 is 128MB, 0x4 is 64MB"
	TokenType = Integer
	TargetEQU = Yes
	Token = "PCIEX_LENGTH" "=" "0x04000000"
End

TOKEN
	Name  = "PCIEX_LENGTH_BIT_SETTING"
	Value  = "0x2"
	Help  = "PCI 0:0:0:60 PCIEXBAR bits [2:0] - PCI express size, 0x0 is 256MB, 0x2 is 128MB, 0x4 is 64MB"
	TokenType = Integer
	TargetEQU = Yes
	Token = "PCIEX_LENGTH" "=" "0x08000000"
End

TOKEN
	Name  = "PCIEX_LENGTH_BIT_SETTING"
	Value  = "0x0"
	Help  = "PCI 0:0:0:60 PCIEXBAR bits [2:0] - PCI express size, 0x0 is 256MB, 0x2 is 128MB, 0x4 is 64MB"
	TokenType = Integer
	TargetEQU = Yes
	Token = "PCIEX_LENGTH" "=" "0x10000000"
End

TOKEN
	Name  = "PELN"
	Value  = "$(PCIEX_LENGTH)"
	TokenType = Integer
	TargetASL = Yes
End

TOKEN
	Name  = "PCI_REGISTER_MAX"
	Value  = "4096"
	Help  = "Contains the maximum value of PCI register that can be accessed. \ Enabled only when PCI config memory access is enabled"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Token = "PCIEX_BASE_ADDRESS" "!=" "0"
End

TOKEN
	Name  = "PCI_REGISTER_MAX"
	Value  = "256"
	Help  = "Contains the maximum value of PCI register that can be accessed. \ Enabled only when PCI config memory access is disabled"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Token = "PCIEX_BASE_ADDRESS" "=" "0"
End

TOKEN
	Name  = "NCPU"
	Value  = "8"
	Help  = "NOTE: If systen has one HT cpu the value has to be 2 and so on...\"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Range  = "1- number of cpu in the system "
End

TOKEN
	Name  = "LAPB"
	Value  = "$(LOCAL_APIC_BASE)"
	Help  = "Local APIC Base Address"
	TokenType = Expression
	TargetASL = Yes
End

TOKEN
	Name  = "CPU_MAX_MEMORY_SIZE"
	Value  = "0x100000000"
	Help  = "Maximum memory size addressable by the CPU"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "PEI_MIN_MEMORY_SIZE"
	Value  = "0x4000000"
	Help  = "Minimum memory required for PEI currently 64 MB"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "MEMORY_ARRAY_NUM"
	Value  = "1"
	Help  = "No of Memory Array"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "DIMM1_SMBUS_ADDRESS"
	Value  = "0A0h"
	Help  = "DIMM Socket 0 - Channel A"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "DIMM2_SMBUS_ADDRESS"
	Value  = "0A2h"
	Help  = "DIMM Socket 1 - Channel A"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "DIMM3_SMBUS_ADDRESS"
	Value  = "0A4h"
	Help  = "DIMM Socket 0 - Channel B"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "DIMM4_SMBUS_ADDRESS"
	Value  = "0A6h"
	Help  = "DIMM Socket 1 - Channel B"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "NB_EP_BASE_ADDRESS"
	Value  = "0FED19000h"
	Help  = "\(G)MCH Egress Port Base Address (D0:F0:Rx40). 4KB non-Conflicting Address Space Required."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "NB_DERAM_BASE_ADDRESS"
	Value  = "0xFED80000"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "NB_GDXC_BASE_ADDRESS"
	Value  = "0xFED84000"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "EGPB"
	Value  = "$(NB_EP_BASE_ADDRESS)"
	TokenType = Integer
	TargetASL = Yes
End

TOKEN
	Name  = "NB_MCH_BASE_ADDRESS"
	Value  = "0FED10000h"
	Help  = "\(G)MCH Memory Mapped Register Range Base Address (D0:F0:Rx48). 16KB non-Conflicting Address Space Required."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "MCHB"
	Value  = "$(NB_MCH_BASE_ADDRESS)"
	TokenType = Integer
	TargetASL = Yes
End

TOKEN
	Name  = "NB_DMI_BASE_ADDRESS"
	Value  = "0FED18000h"
	Help  = "\Root Complex Register Range Base Address (D0:F0:Rx68). 4KB non-Conflicting Address Space Required."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "NB_VTD_BASE_ADDRESS"
	Value  = "0FED90000h"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "VTD_LENGTH"
	Value  = "0x4000"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "VTBS"
	Value  = "$(NB_VTD_BASE_ADDRESS)"
	TokenType = Integer
	TargetASL = Yes
End

TOKEN
	Name  = "VTLN"
	Value  = "$(VTD_LENGTH)"
	TokenType = Integer
	TargetASL = Yes
End

TOKEN
	Name  = "NB_TEMP_MMIO_BASE"
	Value  = "0xFE800000"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "NB_TEMP_MMIO_SIZE"
	Value  = "0x400000"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "NB_IOTRAP_SMI_ADDRESSE"
	Value  = "0x2100"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = " "
	TokenType = Integer
End

TOKEN
	Name  = "=============== IGFX Setup data Type Tokens =============="
	TokenType = Expression
End

TOKEN
	Name  = "IGFX_LCD_PANEL_TYPE"
	Value  = "0x80"
	Help  = "IGFX LCD panel type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "IGFX_LCD_PANEL_SCALING"
	Value  = "0x81"
	Help  = "IGFX LCD panel scaling type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "IGFX_BOOT_TYPE"
	Value  = "0x82"
	Help  = "IGFX boot type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "IGFX_BACKLIGHT_TYPE"
	Value  = "0x83"
	Help  = "IGFX Get Inverter Type and Polarity for Backlight type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "IGFX_LFP_PANEL_COLOR_DEPTH_TYPE"
	Value  = "0x84"
	Help  = "IGFX LFP Panel Color Depth type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "IGFX_EDP_ACTIVE_LFP_CONFIG_TYPE"
	Value  = "0x85"
	Help  = "IGFX Active LCD flat panel(LFP) config type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "IGFX_PRIMARY_DISPLAY_TYPE"
	Value  = "0x86"
	Help  = "IGFX Primary Display config type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "IGFX_DISPLAY_PIPE_B_TYPE"
	Value  = "0x87"
	Help  = "IGFX Display Pipe B device type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "IGFX_SDVO_PANEL_TYPE"
	Value  = "0x88"
	Help  = "IGFX SDVO Panel type"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = " "
	TokenType = Integer
End

TOKEN
	Name  = "=============== CMOS Configuration =============="
	TokenType = Expression
End

TOKEN
	Name  = "NB_CMOS_IFFS_SCRAMBLER_SEED"
	Value  = "0x80"
	Help  = "iFFS scrambler seed use 2 bytes CMOS REG[80 ~ 81]."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Lock = Yes
End

TOKEN
	Name  = " "
	TokenType = Integer
End

TOKEN
	Name  = "====== UEFI based Configuration ======"
	TokenType = Expression
End

TOKEN
	Name  = "OFFSET_14"
	Value  = "15"
	Help  = "Offset 0 based in UEFI 2.1 and 1 based in UEFI 2.0"
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
	Token = "EFI_SPECIFICATION_VERSION" "<=" "0x20000"
End

TOKEN
	Name  = "OFFSET_14"
	Value  = "14"
	Help  = "Offset 0 based in UEFI 2.1 and 1 based in UEFI 2.0"
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
	Token = "EFI_SPECIFICATION_VERSION" ">" "0x20000"
End

TOKEN
	Name  = "OFFSET_15"
	Value  = "16"
	Help  = "Offset 0 based in UEFI 2.1 and 1 based in UEFI 2.0"
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
	Token = "EFI_SPECIFICATION_VERSION" "<=" "0x20000"
End

TOKEN
	Name  = "OFFSET_15"
	Value  = "15"
	Help  = "Offset 0 based in UEFI 2.1 and 1 based in UEFI 2.0"
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
	Token = "EFI_SPECIFICATION_VERSION" ">" "0x20000"
End

TOKEN
	Name  = " "
	TokenType = Integer
End

TOKEN
	Name  = "=============== NB PCI DEVICES SSID TABLE =============="
	TokenType = Expression
End

TOKEN
	Name  = "NB_PCI_DEVICES_SSID_TABLE"
	Value  = "{NB_BUS_DEV_FUN, -1}, {NB_IGD_BUS_DEV_FUN, -1}, {NB_IGD_BUS_DEV_FUN1, -1}, {NB_HDA_BUS_DEV_FUN, -1}, {NB_PCIEBRNx16_BUS_DEV_FUN, -1}, {NB_PCIEBRNx8_BUS_DEV_FUN, -1}, {NB_PCIEBRNx4_BUS_DEV_FUN, -1}"
	Help  = "List of PCI device's Sub-System ID in the following format:\{Device#1 Bus/Device/Function, Device#1 Sub-ID}, {Device#2 Bus/Device/Function, Device#2 Sub-ID}...\The format of the PCI bus/device/function is followed by EFI_PCI_CONFIGURATION_ADDRESS.\If the value of Sub-ID is -1, that means BIOS will use PCI Vendor-ID and Device-ID instead.\The last structure {-1, -1} is end of the table, don't remove it!"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = " "
	TokenType = Integer
End

TOKEN
	Name  = "=============== PCH SKU LPC Device ID for NB HIDE IGFX =============="
	TokenType = Expression
End

TOKEN
	Name  = "NBCSPLib"
	Value  = "$$(LIB_BUILD_DIR)\AmiNbCSPLib.lib"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "=============== SHADOW RAM SETTING =============="
	TokenType = Expression
End

TOKEN
	Name  = "NB_F0000_PAM0"
	Value  = "0"
	TokenType = Integer
        TargetH = Yes
        Range  = "0 - 3"
        Help  = "0: Didable. 1: Read Only. 2: Write Only. 3: R/W Enable."
End

TOKEN
	Name  = "NB_E0000_PAM5"
	Value  = "0"
	TokenType = Integer
        TargetH = Yes
        Range  = "0 - 3"
        Help  = "0: Didable. 1: Read Only. 2: Write Only. 3: R/W Enable."
End

TOKEN
	Name  = "NB_E8000_PAM6"
	Value  = "0"
	TokenType = Integer
        TargetH = Yes
        Range  = "0 - 3"
        Help  = "0: Didable. 1: Read Only. 2: Write Only. 3: R/W Enable."
End

TOKEN
	Name  = "=============== SG GPIO Support =============="
	TokenType = Expression
End

TOKEN
	Name  = "SG_GPIO_SUPPORT"
	Value  = "1"
	Help  = "Main switch to enable GpioSupport for SG. 1: TRUE 0:FALSE"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
        TargetH = Yes
End

TOKEN
	Name  = " "
	TokenType = Expression
End

PATH
	Name  = "NB_BOARD_DIR"
	Path  = "Board\NB"
End

PATH
	Name  = "NB_CHIPSET_DIR"
	Path  = "Chipset\NB"
End

MODULE
	Help  = "Includes NB.mak to Project"
	File  = "NB.mak"
End

ELINK
	Name  = "/D DIMM_SLOT_NUM=4"
	Parent  = "CFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(MEM_INIT_FV_BB)"
	Parent  = "FV_BB"
	InvokeOrder = BeforeParent
End

ELINK
	Name  = "$(NB_CHIPSET_DIR)\NB.asl"
	Parent  = "INTEL_GENERIC_ASL"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "\_SB.PCI0.NPTS(Arg0)"
	Parent  = "ASL_PTS"
	Help  = "Include North Bridge Specific Function at PTS.\Arg0 is a sleep state the System is targeted for."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "\_SB.PCI0.NWAK(Arg0)"
	Parent  = "ASL_WAK"
	Help  = "Include North Bridge Specific Function at WAK.\Arg0 is a sleep state the System is resuming from. "
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/I$(NB_BOARD_DIR)"
	Parent  = "$(GLOBAL_DEFINES)"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/I$(NB_CHIPSET_DIR)"
	Parent  = "$(GLOBAL_DEFINES)"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SECNB_EarlyInit"
	Parent  = "GainestownSecRcEntry"
	Help  = "NB Early Init in SEC (before Cache as memory enabling)"
	SrcFile  = "Board\NB\NBSECInit.ASM"
	Token = "INCLUDE_NB_ASM_FILE_IN_SEC" "=" "1"
	InvokeOrder = BeforeParent
End

ELINK
	Name  = "$(BUILD_DIR)\NBPEI.ffs"
	Parent  = "FV_BB"
	Help  = "Template NB PEI component"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(BUILD_DIR)\NBDXE.ffs"
	Parent  = "FV_MAIN"
	Help  = "Template NB DXE component"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/D PLATFORM_PCIEX_BASE_ADDRESS=$(PCIEX_BASE_ADDRESS)"
	Parent  = "CFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/D EDKII_GLUE_PciExpressBaseAddress=$(PCIEX_BASE_ADDRESS)"
	Parent  = "CFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "/D PLATFORM_PCIEX_LENGTH=$(PCIEX_LENGTH)"
	Parent  = "CFLAGS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(BUILD_DIR)\NBSECInit.OBJ"
	Parent  = "ADDON_SEC_CORE_OBJ_FILES"
	Token = "INCLUDE_NB_ASM_FILE_IN_SEC" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "NBINT15"
	Parent  = "CsmOemInterrupts"
	ProcID  = 015h
	SrcFile  = "$(NB_BOARD_DIR)\nbint15.asm"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(BUILD_DIR)\nbint15.obj"
	Parent  = "CSM_OEMINT_OBJS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(NB_BOARD_DIR)\Nb.ssp"
	Parent  = "ADDON_SSP_FILES"
	Token = "CMOS_MANAGER_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "NbAcpiEnabled,"
	Parent  = "AcpiEnableCallbackList"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "NbAcpiDisabled,"
	Parent  = "AcpiDisableCallbackList"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "NbRuntimeShadowRamWrite,"
	Parent  = "RuntimeShadowRamWrite"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "CheckPeiFvCopyToRam,"
	Parent  = "PeiRamBootList"
	Token = "PeiRamBootSupport" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "NBGetPlatformHandle,"
	Parent  = "CSM_GET_PLATFORM_HANDLE_FUNCTIONS"
	Token = "CSM_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OEM_PCI_DEVICE_CALLBACK(0, 0, NBProtectedPciDevice),"
	Parent  = "OEM_SKIP_PCI_DEVICE"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OEM_PCI_DEVICE_CALLBACK(0, 0, NBProgramPciDevice),"
	Parent  = "OEM_PROGRAM_PCI_DEVICE"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OEM_PCI_DEVICE_CALLBACK(0, 0, NBUpdatePciDeviceAttributes),"
	Parent  = "OEM_PCI_ATTRIBUTES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "MEM_INIT_FV_BB"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "NbConfigurationList"
	InvokeOrder = ReplaceParent
End

ELINK   # [ EIP221317 ]
    Name  = '{L"MrcS3Resume", {0x87f22dcb, 0x7304, 0x4105, 0xbb, 0x7c, 0x31, 0x71, 0x43, 0xcc, 0xc2, 0x3b}},'
    Parent  = "BLOCKED_S3_VAR_LIST"
    InvokeOrder = AfterParent
End

ELINK   # [ EIP221317 ]
    Name  = '{L"PegGen3PresetSearchData", {0xe1e2a446, 0x365, 0x4c65,  0x91, 0x9c, 0x03, 0x71, 0xc3, 0xf9, 0xf5, 0xff}},'
    Parent  = "BLOCKED_S3_VAR_LIST"
    InvokeOrder = AfterParent
End

#*************************************************************************
#*************************************************************************
#**                                                                     **
#**        (C)Copyright 1985-2015, American Megatrends, Inc.            **
#**                                                                     **
#**                       All Rights Reserved.                          **
#**                                                                     **
#**      5555 Oakbrook Parkway, Suite 200, Norcross, GA 30093           **
#**                                                                     **
#**                       Phone: (770)-246-8600                         **
#**                                                                     **
#*************************************************************************
#*************************************************************************