path: root/CRB/CSP.sdl

#*************************************************************************
#*************************************************************************
#**                                                                     **
#**        (C)Copyright 1985-2011, American Megatrends, Inc.            **
#**                                                                     **
#**                       All Rights Reserved.                          **
#**                                                                     **
#**      5555 Oakbrook Parkway, Suite 200, Norcross, GA 30093           **
#**                                                                     **
#**                       Phone: (770)-246-8600                         **
#**                                                                     **
#*************************************************************************
#*************************************************************************

#*************************************************************************
# $Header: /Alaska/Projects/Intel/Haswell/LynxPoint_SharkBay-DT_Crb_1AQQW/CRB/CSP.sdl 5     4/24/13 2:49a Thomaschen $
#
# $Revision: 5 $
#
# $Date: 4/24/13 2:49a $
#*************************************************************************
# Revision History
# ----------------
# $Log: /Alaska/Projects/Intel/Haswell/LynxPoint_SharkBay-DT_Crb_1AQQW/CRB/CSP.sdl $
# 
# 5     4/24/13 2:49a Thomaschen
# add token "USB_CONTROLLERS_WITH_RMH"
# 
# 4     12/13/12 4:02a Wesleychen
# EIP#108566: Fixed ME will not work under debug mode.
# 
# 2     11/21/12 6:10a Wesleychen
# Fix FV_BB size over 1MB cannot boot.
# 
# 1     2/12/12 10:38p Victortu
# Intel SharkBay CRB initially releases.
# 
#*************************************************************************
TOKEN
	Name  = "USB_UHCI"
	Value  = "0"
	Help  = "Maximum number of UHCI controllers present in the system"
	TokenType = Integer
	TargetH = Yes
	Range  = "0-6"
End

TOKEN
	Name  = "USB_EHCI"
	Value  = "2"
	Help  = "Maximum number of EHCI controllers present in the system"
	TokenType = Integer
	TargetH = Yes
	Range  = "0-6"
End

TOKEN
	Name  = "USB_XHCI"
	Value  = "1"
	Help  = "Maximum number of supported XHCI controllers"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "XHCI_EVENT_SERVICE_MODE"
	Value  = "0"
	Help  = "This token controlls xHCI event service mode.\0 - Use periodic timer SMI.\1 - Use xHCI hardware SMI.\2 - Both periodic timer SMI and se xHCI hardware SMI."
	TokenType = Integer
	TargetH = Yes
	Range  = "0..2"
End

TOKEN
	Name  = "USB_XHCI_EXT_HW_SMI_PINS"
	Value  = "255"
	Help  = "List of xHCI GPI bit offset in the following format: GPI0, GPI1,...,GPIN.\Use 0xFF (255) to ignore the settings."
	TokenType = Expression
	TargetH = Yes
	Range  = "0..31"
	Token = "XHCI_EVENT_SERVICE_MODE" "!=" "0"
End

TOKEN
	Name  = "EHCI_PCI_DEVICES"
	Value  = "{0xD0, 0x20}, {0xE8, 0x20}"
	Help  = "List of supported EHCI controllers in the following format: {dev1, 0}, {dev2, 0},...,{devN, 0}\dev represents the location of EHCI controller on PCI bus: dev = Bus << 8 + Dev << 3 + Func. Value followed by dev is the PCI device interface, for EHCI it must be 0x20.\Note: number of pairs {dev, 0} must not be less than a number of supported UHCI controllers specified in USB_UHCI token."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "XHCI_PCI_DEVICES"
	Value  = "{0xA0, 0x30}"
	Help  = "List of supported onchip XHCI controllers in the following format: {dev1, 0}, {dev2, 0},...,{devN, 0}\dev represents the location of XHCI controller on PCI bus: dev = Bus << 8 + Dev << 3 + Func. Value followed by dev is the PCI device interface, for XHCI it must be 0x30.\Note: number of pairs {dev, 0} must not be less than a number of supported EHCI controllers specified in USB_XHCI token."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "UHCI_PCI_DEVICES"
	Value  = "{0xD0, 0}, {0xD1, 0}, {0xD2, 0}, {0xD3, 0}, {0xE8, 0}, {0xE9, 0}, {0xEA, 0}, {0xEB, 0}, {0xEC, 0}"
	Help  = "List of supported UHCI controllers in the following format: {dev1, 0}, {dev2, 0},...,{devN, 0}\dev represents the location of UHCI controller on PCI bus: dev = Bus << 8 + Dev << 3 + Func. Value followed by dev is the PCI device interface, for UHCI it must be 0.\Note: number of pairs {dev, 0} must not be less than a number of supported UHCI controllers specified in USB_UHCI token."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
        Name  = "USB_CONTROLLERS_WITH_RMH"
        Value  = "{0x8086, 0x8C26}, {0x8086, 0x8C2D}" # for Intel Lynx Point
        Help  = "List of USB controllers that have integrated USB 2.0 Rate Matching Hubs (RMH) in the following format: {vid1, did1}, {vid2, did2}"
        TokenType = Expression
        TargetH = Yes
End

TOKEN
	Name  = "PEI_EHCI_PCI_BDFS"
	Value  = "{0x1A0000, 0x1D0000}"
	Help  = "List of supported EHCI controllers in the following format: {devfunc1, devfunc2,...,devfuncN}\devfunc represents the location of UHCI controller on PCI bus: dev = Bus << 24 + Dev << 16 + Func << 8. Value followed by dev is the PCI device interface, for UHCI it must be 0.\Note: number of entries {devfunc} must not be less than a number of supported EHCI controllers specified in PEI_NUM_EHCI token."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "PEI_UHCI_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable UHCI Controller support for USB recovery"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "PEI_EHCI_SUPPORT"
	Value  = "1"
	Help  = "Main switch to enable EhciPei support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "PEI_UHCI_PCI_DEVICES"
	Value  = "{0x1A0000, 0x1A0100, 0x1A0200, 0x1D0000, 0x1D0100, 0x1D0200, 0x1D0300}"
	Help  = "List of supported UHCI controllers in the following format: {devfunc1, devfunc2,...,devfuncN}\devfunc represents the location of UHCI controller on PCI bus: dev = Bus << 24 + Dev << 16 + Func << 8. Value followed by dev is the PCI device interface, for UHCI it must be 0.\Note: number of entries {devfunc} must not be less than a number of supported UHCI controllers specified in PEI_NUM_UHCI token."
	TokenType = Expression
	TargetH = Yes
	Token = "PEI_UHCI_SUPPORT" "=" "1"
End

TOKEN
	Name  = "PEI_EHCI_PCI_BDFS"
	Value  = "{0x1A0000, 0x1D0000}"
	Help  = "List of supported EHCI controllers in the following format: {devfunc1, devfunc2,...,devfuncN}\devfunc represents the location of EHCI controller on PCI bus: dev = Bus << 24 + Dev << 16 + Func << 8. Value followed by dev is the PCI device interface, for EHCI it must be 0.\Note: number of entries {devfunc} must not be less than a number of supported EHCI controllers specified in PEI_NUM_EHCI token."
	TokenType = Expression
	TargetH = Yes
	Token = "PEI_EHCI_SUPPORT" "=" "1"
End

TOKEN
	Name  = "PEI_EHCI_MEM_BASE_ADDRESSES"
	Value  = "{$(EHCI_MMIO_BASE_ADDRESS1), $(EHCI_MMIO_BASE_ADDRESS2)}"
	Help  = "List of supported EHCI controllers in the following format: {devfunc1, devfunc2,...,devfuncN}\devfunc represents the location of UHCI controller on PCI bus: dev = Bus << 24 + Dev << 16 + Func << 8. Value followed by dev is the PCI device interface, for UHCI it must be 0.\Note: number of entries {devfunc} must not be less than a number of supported EHCI controllers specified in USB_EHCI token."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SMM_CACHE_SUPPORT"
	Value  = "1"
	Help  = "Enable/disable SMM Cache Support"
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "FWHFlash_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable FWH Flash support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
End

TOKEN
	Name  = "LPCFlash_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable LPC Flash support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
End

TOKEN
	Name  = "CMOS_USES_STANDARD_BATTERY_TEST"
	Value  = "0"
	Help  = "Specifies whether or not to use CMOS Manager's default battery test function.  If a platform provides a different battery test function this token should be disabled."
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "MAX_MANAGED_CMOS_ADDRESS"
	Value  = "256"
	Help  = "Last CMOS address + 1 use to specify the maximum address that is manages by CMOS Manager"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SW_IRQ_GENERATION_REG"
	Value  = "$(PM_BASE_ADDRESS)+0x70"
	Help  = "Software IRQ generation regsiter from SB to generate the IRQ12 and IRQ1."
	TokenType = Integer
	TargetH = Yes
	Token = "IRQ_EMUL_SUPPORT" "=" "1"
End

TOKEN
	Name  = "IODECODETYPE"
	Value  = "0"
	Help  = "Check project actually who does IODecode Implement by :\1 - decode by OEM porting with eLink function(default),\0 - decode by chipset porting in SBGeneric.c"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "DUTY_OFFSET_VAL"
	Value  = "0"
	Help  = "The zero-based index of where the processor�s duty cycle setting is within the processor�s P_CNT register.\(for more information, ACPI SPEC)."
	TokenType = Integer
	TargetH = Yes
	Range  = "0-0xf0"
End

TOKEN
	Name  = "DUTY_WIDTH_VAL"
	Value  = "0"
	Help  = "The bit width of the processor�s duty cycle setting value in the P_CNT register. Each processor�s duty cycle setting\allows the software to select a nominal processor frequency below its absolute frequency.\(for more information, ACPI SPEC)."
	TokenType = Integer
	TargetH = Yes
	Range  = "0-0xff: depends on 'duty_offset'"
End

TOKEN
	Name  = "RESET_RUNTIME_SERVICES_SUPPORT"
	Value  = "0"
	Help  = "If ON includes in project CORE implementation of reset \services (from TimeAndReset.c). \Set to OFF to use stand alone reset driver."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
	Token = "PchReset_SUPPORT" "=" "1"
End

TOKEN
	Name  = "RTC_RUNTIME_SERVICES_SUPPORT"
	Value  = "1"
	Help  = "If ON includes in project CORE implementation of RTC \services (from TimeAndReset.c). \Set to OFF to use stand alone RTC driver."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "CODE_CACHE_SIZE"
	Value  = "0x100000"
	Help  = "Code Cache Size in SEC phase\This size must a multiple of 4k and must be 2^n size. Caching the entire flash will cause cache line evictions."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TOTAL_FV_BB_SIZE"
	Value  = "$(FV_BB_BLOCKS)*$(FLASH_BLOCK_SIZE)"
	Help  = "Total FV_BB size in byte."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "CODE_CACHE_PART2_SIZE"
	Value  = "$(TOTAL_FV_BB_SIZE)-$(CODE_CACHE_SIZE)"
	Help  = "Turn on CODE_CACHE_PART2 when FV_BB size > CODE_CACHE_SIZE.\Code Cache PART 2 Size ."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Token = "TOTAL_FV_BB_SIZE" ">" "0x100000"
End

TOKEN
	Name  = "CODE_CACHE_PART2_BASE"
	Value  = "0xffffffff-($(CODE_CACHE_SIZE)+$(CODE_CACHE_PART2_SIZE))+1"
	Help  = "Turn on CODE_CACHE_PART2 when FV_BB size > CODE_CACHE_SIZE.\Code Cache PART 2 Base Address. 0 = No PART 2"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Token = "TOTAL_FV_BB_SIZE" ">" "0x100000"
End

TOKEN
	Name  = "NO_OF_PHYSICAL_MEMORY_ARRAY"
	Value  = "$(MEMORY_ARRAY_NUM)"
	Help  = "Specifies the Total number of Physical Arrays in the System."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Range  = "1 - 5"
End

TOKEN
	Name  = "ME_IGNITION_FW_MSG_SUPPORT"
	Value  = "0"
	Help  = "Enable this Token to Show Ignition FW status during POST"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "PowerButton_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable PowerButton support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
End

TOKEN
	Name  = "LIBEXE"
	Value  = "$(SILENT)LINK /LIB"
	TokenType = Expression
	TargetMAK = Yes
End

ELINK
	Name  = "$(BUILD_DIR)\UsbBotPeim.ffs"
	Parent  = "FV_BB"
	Token = "UsbRecov_SUPPORT" "=" "1"
	InvokeOrder = BeforeParent
End

ELINK
	Name  = "$(BUILD_DIR)\Recovery.ffs"
	Parent  = "FV_BB"
	Token = "Recovery_SUPPORT" "=" "1"
	InvokeOrder = BeforeParent
End

#*************************************************************************
#*************************************************************************
#**                                                                     **
#**        (C)Copyright 1985-2011, American Megatrends, Inc.            **
#**                                                                     **
#**                       All Rights Reserved.                          **
#**                                                                     **
#**      5555 Oakbrook Parkway, Suite 200, Norcross, GA 30093           **
#**                                                                     **
#**                       Phone: (770)-246-8600                         **
#**                                                                     **
#*************************************************************************
#*************************************************************************

##  k_prj begin
## Modules Disable
TOKEN
	Name  = "AmiGopPolicy"
	Value  = "0"
	Help  = "Main Switch to Enable AmiGopPolicy in Platform"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
#	Master = Yes
End
TOKEN
    Name  = "HARDWARE_SIGNATURE_MANAGEMENT_SUPPORT"
    Value  = "0"
    TokenType = Boolean
    TargetEQU = Yes
    TargetMAK = Yes
    TargetH = Yes
#    Master = Yes
    Help  = "Main switch to enable HardwareSignatureManagement support in Project"
End
TOKEN
	Name  = "CPPC_SUPPORT"
	Value  = "0"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
	Help  = "Main switch to enable CPPC supppory in Project"
End
TOKEN
	Name  = "ISCT_PLATFORM_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable ISCT support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
#	Master = Yes
End
TOKEN
	Name  = "IntelGigabitLan_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable Intel Gigabit Lan network chip support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
End
TOKEN
    Name  = "OemActivation_SUPPORT"
    Value = "0"
    Help  = "Main switch to enable OemActivation support in Project"
    TokenType = Boolean
    TargetH   = Yes
    TargetMAK = Yes
#    Master = Yes
End
TOKEN
    Name  = OpalSecurity_SUPPORT
    Value  = "0"
    TokenType = Boolean
    TargetMAK = Yes
    TargetH = Yes
#    Master = Yes
    Help  = "Main switch to enable OpalSecurity support in Project"
End
TOKEN
	Name  = "POST_TIME_TUNING_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable Post Time Tuning module in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
End
TOKEN
	Name  = "SecureBoot_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable SecureBoot Module support in Project"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
	Token = "CryptoAPI_SUPPORT" "=" "1"
End
TOKEN
	Name  = "SecureMod_SUPPORT"
	Value  = "0"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
	Token = "CryptoAPI_SUPPORT" "=" "1"
End
TOKEN
    Name  = "SECURE_FLASH_SUPPORT"
    Value  = "0"
    TokenType = Boolean
    TargetEQU = Yes
    TargetMAK = Yes
#    Master = Yes
    Help  = "Main switch to enable Security Flash in Project"
    Token = "SecSMIFlash_SUPPORT" "=" "1"
End
TOKEN
	Name  = "EcPs2Kbd_SUPPORT"
	Value  = "0"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
End
TOKEN
    Name  = "IdeSMART_Support"
    Value  = "0"
    Help  = "Main switch to enable IdeSMART support in Project"
    TokenType = Boolean
    TargetEQU = Yes
    TargetMAK = Yes
    TargetH = Yes
#    Master = Yes
End
TOKEN
    Name  = "HDD_SECURITY_SUPPORT"
    Value  = "0"
    Help  = "Main switch to enable Hdd Security support in Project"
    TokenType = Boolean
    TargetEQU = Yes
    TargetMAK = Yes
    TargetH = Yes
#    Master = Yes
End
TOKEN
	Name  = "AmiSgTPV_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable SwitchableGraphics TPV support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
        Token = "SwitchableGraphics_SUPPORT" "=" "1"
End
TOKEN
	Name  = "SwitchableGraphics_SUPPORT"
	Value  = "0"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End
TOKEN
	Name  = "TCG2Support"
	Value  = "0"
	Help  = "Enable or Disable TCG_generic support"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
End
TOKEN
	Name  = "UefiNetworkStackII"
	Value  = "0"
	Help  = "Main switch to enable netwwork stack drivers support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
End
TOKEN
    Name  = "NVMe_SUPPORT"
    Value  = "0"
    Help  = "Main switch to enable NVMe support in Project"
    TokenType = Boolean
    TargetEQU = Yes
    TargetH = Yes
#    Master = Yes
End
TOKEN
	Name  = ACOUSTIC_MANAGEMENT_DRIVER_SUPPORT
	Value  = "0"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
	Help  = "Main switch to enable Acoustic Management support in Project"
End
TOKEN
	Name  = "PfatServices_SUPPORT"
	Value  = "0"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
    TargetH   = Yes
#	Master = Yes
	Help  = "Main switch to enable Pfat support in Project, needs NvramSmiSupport Enabled"
    Token = "NvramSmiSupport" "=" "1"
End
TOKEN
	Name  = "NFC_SUPPORT_DXE_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable NfcSupportDxe support in DXE Phase"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
End

## Override
## CRB\CSP.sdl
TOKEN
	Name  = "PowerButton_SUPPORT"
	Value  = "1"
	Help  = "Main switch to enable PowerButton support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
End
ELINK
	Name  = "IsCtrlHomePressed,"
	Parent  = "IsRecovery"
	Help  = "Ctr+Home detection"
#	Token = "KBC_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
	Disable = Yes
End

## CRB\CRB.sdl
ELINK
	Name  = "{0x10EC0662, 0, 0xFF, TRUE, 11, 2, ZprjHdaVerbTbl},"
	Parent  = "OEM_HDA_VERB_TABLE"
	Help  = "CRB HDA Verb Table"
	Token = "CRB_HDA_VERB_TABLE_PRESENT" "=" "1"
	InvokeOrder = AfterParent
End
TOKEN
	Name  = "BEEP_ENABLE"
	Value  = "1"
	Help  = "This flag enables/disables all firmware beeps"
	TokenType = Boolean
	TargetH = Yes
	TargetEQU = Yes
	TargetMAK = Yes
End
TOKEN
	Name  = "ISA_IRQ_MASK"
	Value  = "0xE305"
	Help  = "This is an IRQ mask which may be used by ISA devices\ If BIT == 0 IRQ Available BIT == 1 IRQ Used.\DEFAULT VALUE == 0xE305."
	TokenType = Integer
	TargetH = Yes
	Range  = "0...0FFFFh"
End


## ReferenceCode\ME\ActiveManagement\ActiveManagement.sdl
TOKEN
	Name  = "iAMT_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable iAMT support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
	Token = "iME_SUPPORT" "=" "1"
End

## RomImage\RomImage.sdl
TOKEN
    Name  = "Q87_SKU_BUILD_SET"
    Value  = "$(Me_Q87_Xml) 0 Q87"
    Help  = "FitcBuild <MeXmlFile> <MeFwSelect> <MeFwSku> <FlashCount> <FlashSize1> <FlashSize2>\<MeFwSelect>:0 = 1.5MB ME Firmware, 1 = 5MB ME Firmware.\<MeFwSku>:Z87_SKU, Z85_SKU, Q87_SKU, H87_SKU, Q85_SKU, B85_SKU, H81_SKU.\<MeFwSku>:Use Xml file need give a name, this name do not use XXXX_SKU.\<FlashCount>:1 = One image, 2 = Two image.\<FlashSize1>:0=512KB,1=1MB,2=2MB,3=4MB,4=8MB,5=16MB.\<FlashSize2>:0=512KB,1=1MB,2=2MB,3=4MB,4=8MB,5=16MB."
    TokenType = Expression
    TargetMAK = Yes
    Token = "Q87_SKU" "=" "1"
End
TOKEN
    Name  = "H87_SKU"
    Value  = "0"
    Help  = "On/Off build this image."
    TokenType = Boolean
    TargetMAK = Yes
    Token = "SELECT_BUILD_PLATFORM" "=" "1"
End

## Board\NB\NB.sdl
PCIDEVICE
	Title  = "I.G.F.X."
	Bus  = 00h
	Dev  = 02h
	Fun  = 00h
	ROMFile  = "Chipset\NB\hsw_1039.dat"
	DeviceID  = 0402h
	VendorID  = 08086h
	IntA = 	LNKA; 16
	DeviceType = OnBoard
	PCIBusSize = 32bit
	OptionROM = Yes
	CompressedROM = Yes
End

## Board\SB\SB.sdl
IRQLINK
	Name  = "LNKA"
	Reg  = 060h
	IrqList  = 3,4,5,6,7,10,11,12,14,15
	InterruptType = LevelLow
End
IRQLINK
	Name  = "LNKB"
	Reg  = 061h
	IrqList  = 3,4,5,6,7,10,11,12,14,15
	InterruptType = LevelLow
End
IRQLINK
	Name  = "LNKC"
	Reg  = 062h
	IrqList  = 3,4,5,6,7,10,11,12,14,15
	InterruptType = LevelLow
End
IRQLINK
	Name  = "LNKD"
	Reg  = 063h
	IrqList  = 3,4,5,6,7,10,11,12,14,15
	InterruptType = LevelLow
End
IRQLINK
	Name  = "LNKE"
	Reg  = 068h
	IrqList  = 3,4,5,6,7,10,11,12,14,15
	InterruptType = LevelLow
End
IRQLINK
	Name  = "LNKF"
	Reg  = 069h
	IrqList  = 3,4,5,6,7,10,11,12,14,15
	InterruptType = LevelLow
End
IRQLINK
	Name  = "LNKG"
	Reg  = 06ah
	IrqList  = 3,4,5,6,7,10,11,12,14,15
	InterruptType = LevelLow
End
IRQLINK
	Name  = "LNKH"
	Reg  = 06bh
	IrqList  = 3,4,5,6,7,10,11,12,14,15
	InterruptType = LevelLow
End
PCIDEVICE
	Title  = "GbE Controller"
	Bus  = 00h
	Dev  = 019h
	Fun  = 00h
	ROMFile  = "Chipset\SB\GbE_OR.BIN"
	DeviceID  = 01502h
	VendorID  = 08086h
	IntA = 	LNKE; 20
	DeviceType = OnBoard
	PCIBusSize = 32bit
	OptionROM = Yes
	CompressedROM = Yes
	LinkDevice = Yes
	Disable = Yes
End
TOKEN
	Name  = "PCH_PWR_OPT_GBE"
	Value  = "0"
	Help  = "0:Set the function to 'Disabled'.\1:Set the function to 'Enabled'."
	TokenType = Boolean
	TargetH = Yes
End
TOKEN
	Name = "SB_IO_DECODE_IN_SEC"
	Value = "1"
	Help = "The value of SIO_PME_BASE_ADDRESS, '0' means no function."
	TokenType = Boolean
	TargetEQU = Yes
End
TOKEN
	Name = "SB_GEN_DECODE_RANGE_1"
	Value = "0x200"
	Help = "The value of SIO_PME_BASE_ADDRESS, '0' means no function."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Range = "00 - 0FFFFh"
	Token = "SB_IO_DECODE_IN_SEC" "=" "1"
End
TOKEN
	Name = "SB_GEN_DECODE_RANGE_2"
	Value = "0xA00"
	Help = "The value of SIO_PME_BASE_ADDRESS, '0' means no function."
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Range = "00 - 0FFFFh"
	Token = "SB_IO_DECODE_IN_SEC" "=" "1"
End

## Program PCH GPIO
TOKEN
	Name = "PROGRAM_GPIO_TYPE"
	Value = "1"
	Help = "0:use array directly/1:use token define"
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_000"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_001"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_002"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_003"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_004"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_005"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_006"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_007"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_008"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_009"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_010"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_011"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_012"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_013"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_014"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_015"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_016"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_017"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_018"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_019"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_020"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_021"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_022" ## LAN1_DISABLE#
	Value = "$(GPO_HIGH)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_023"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_024"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_025"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_026"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_027"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_028"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_029"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_030"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_031"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_032"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_033"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_034"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_035"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_036"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_037"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_038" ## LAN2_DISABLE#
	Value = "$(GPO_HIGH)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_039" ## BOARD_ID
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_040"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_041"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_042"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_043"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_044"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_045"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_046"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_048" ## BOARD_ID
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_049"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_050" ## Connected to TPM Header
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_051"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_052"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_053"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_054"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_055"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_057"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_058" ## SML1CLK
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_059"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_060"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_061"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_062"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_063"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_064"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_065"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_066"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_067"
	Value = "$(IS_NOT_GPIO)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_068"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_069"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_070"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_071"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_072"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_073"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_074"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name = "GPIO_075"
	Value = "$(IS_GPIO)+$(IS_GPI)"
	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End

## Board\IO\F81866\IO_F81866.SDL
TOKEN
	Name  = "BOARD_LABEL_BELOW_25"
	Value  = "0"
	Help  = "Enable(Core<=4.6.4.0)/Disable(Core > 4.6.4.0 have defined AMI_CALLBACK_VARSTORE)"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End
TOKEN
	Name  = "F81866_FLOPPY_PORT_PRESENT"
	Value  = "0"
	Help  = "Floppy Port Present / Not Present."
	TokenType = Boolean
	TargetH = Yes
End
TOKEN
	Name  = "F81866_PARALLEL_PORT_PRESENT"
	Value  = "1"
	Help  = "LPT Port Present / Not Present."
	TokenType = Boolean
	TargetH = Yes
End
TOKEN
	Name  = "F81866_IBEX_SUPPORT"
	Value  = "0"
	Help  = "Intel PECI 1/0 support/not"
	TokenType = Boolean
	TargetH = Yes
#	Token = "F81866_HWM_PRESENT" "=" "1"
End
TOKEN
	Name  = "F81866_T2_MODE"
	Value  = "0"
	Help  = "0: TEMP2 is connected to a thermistor.\1: TEMP2 is connected to a BJT. (default)"
	TokenType = Integer
	TargetH = Yes
End
TOKEN
	Name  = "F81866_T1_MODE"
	Value  = "0"
	Help  = "0: TEMP1 is connected to a thermistor\1: TEMP1 is connected to a BJT.(default)"
	TokenType = Integer
	TargetH = Yes
End
TOKEN
	Name  = "F81866_SMF_SUPPORT"
	Value  = "1"
	Help  = "F81866 SmartFan control support"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
	Token = "F81866_HWM_PRESENT" "=" "1"
End

## Board\IO\F81216\IO_F81216.SDL
TOKEN
	Name  = "F81216SEC_CLOCK"
	Value  = "1"
	Help  = "1/0 for 48Mhz/24MHz"
	TokenType = Integer
	TargetH = Yes
End
TOKEN
	Name  = "F81216SEC_CONFIG_INDEX"
	Value  = "0x4E"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name  = "F81216SEC_CONFIG_DATA"
	Value  = "0x4F"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
End
TOKEN
	Name  = "F81216SEC_CONFIG_MODE_ENTER_VALUE"
	Value  = "0x87"
	Help  = "Value to enter Configuration Mode.Please check your hardware\Default is 0x77.\others are 0xA0, 0x87, 0x67"
	TokenType = Integer
	TargetH = Yes
End

## Core\EM\Recovery\Recovery.sdl
TOKEN
	Name  = "Recovery_SUPPORT"
	Value  = "0"
	Help  = "Main switch to enable Recovery support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
#	Master = Yes
End

ELINK
	Name  = "{ CLOCK_SRC0, PCI_FUNCTION_NUMBER_PCH_PCIE_ROOT_PORT_1, 0 },"
	Parent  = "PCIEClockConfig"
	InvokeOrder = AfterParent
	Help  = "Intel Flathead Creek, PCIE Slot#6(J13BU)"
End
ELINK
	Name  = "{ CLOCK_SRC1, PCI_FUNCTION_NUMBER_PCH_PCIE_ROOT_PORT_2, 0 },"
	Parent  = "PCIEClockConfig"
	InvokeOrder = AfterParent
	Help  = "Intel Flathead Creek, PCIE Slot#6(J13BU)"
End
ELINK
	Name  = "{ CLOCK_SRC2, PCI_FUNCTION_NUMBER_PCH_PCIE_ROOT_PORT_3, 0 },"
	Parent  = "PCIEClockConfig"
	InvokeOrder = AfterParent
	Help  = "Intel Flathead Creek, PCIE Slot#6(J13BU)"
End

ELINK
	Name  = "ConInAvailabilityBeep,"
	Parent  = "/* Connect ConIn Devices */"
#	Token = "BEEP_ENABLE" "=" "1"
	InvokeOrder = AfterParent
End
ELINK
	Name  = "BeepService,"
	Parent  = "ReportMiscStatus"
#	Token = "BEEP_ENABLE" "=" "1"
	InvokeOrder = AfterParent
End
ELINK
	Name  = "BeepStatus,"
	Parent  = "ReportSimpleStatus"
#	Token = "BEEP_ENABLE" "=" "1"
	InvokeOrder = AfterParent
End

TOKEN
	Name  = "PASSWORD_MIN_SIZE"
	Value  = "8"
	TokenType = Integer
	TargetH = Yes
End
TOKEN
	Name  = "SETUP_PASSWORD_LENGTH"
	Value  = "12"
	Help  = "Default maximum password length. TSE Source needed to change the length"
	TokenType = Integer
	TargetH = Yes
End
TOKEN
	Name  = "SETUP_ENTRY_SCAN"
	Value  = "EFI_SCAN_F11"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol. Remember to check STR_DEL_ENTER_SETUP string in MiniSetupStr.uni."
	TokenType = Expression
	TargetH = Yes
End
TOKEN
	Name  = "POPUP_MENU_ENTRY_SCAN"
	Value  = "EFI_SCAN_F10"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_BBS_POPUP_ENABLE" "!=" "0"
End
TOKEN
	Name  = "TSE_DEFAULT_SETUP_PASSWORD_SUPPORT"
	Value  = "0"
	Help  = "0 is default.set 1=> to Enable default setup password"
	TokenType = Expression
	TargetH = Yes
	TargetMAK = Yes
End
TOKEN
	Name  = "DEFAULT_SETUP_PWD_AT_FIRSTBOOT_ONLY"
	Value  = "0"
	Help  = "1 is default. 1 => Sets the TSE_ADMIN_PASSWORD and TSE_USER_PASSWORD at first boot only. 0 => Sets TSE_ADMIN_PASSWORD and TSE_USER_PASSWORD in TSE defaults, on load defaults these data will be loaded"
	TokenType = Expression
	TargetH = Yes
	TargetMAK = Yes
	Token = "TSE_DEFAULT_SETUP_PASSWORD_SUPPORT" "=" "1"
End
TOKEN
	Name  = "TSE_ADMIN_PASSWORD"
	Value  = "Grg90#@B"
	Help  = "Defaultly no password is given. Need TSE source to change this. Provide data to set as default admin password. Maximum string can be provide is based on SETUP_PASSWORD_LENGTH token. String should be atleat minimum length mentioned in vfr. If no password is given it will not set any default password. Note: specify EMPTY_DATA in value if default admin password is not required"
	TokenType = Expression
	TargetH = Yes
	TargetMAK = Yes
	Token = "TSE_DEFAULT_SETUP_PASSWORD_SUPPORT" "=" "1"
End
TOKEN
	Name  = "TSE_DONOT_LOAD_PASSWORD_ON_DEFAULTS"
	Value  = "1"
	Help  = "1 => Will not load defaults for password when we press F3. 0 => Load default passowrd."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_SUPPORT_NATIVE_RESOLUTION"
	Value  = "0"
	Help  = "Sets the graphics mode for quiet boot from EDID. 1 - Defaultly enable make 0 to disable the feature"
	TokenType = Boolean
	TargetH = Yes
End
TOKEN
	Name  = "GC_MODE0"
	Value  = "{ 0, 80, 25, 640, 480 }"
	Help  = "Parameters of the graphica console text mode 0.\NOTE: Text resolution of the mode 0 must be 80 by 25\Format: {ModeNumber, TextColomns,TextRows, HorizontalPixels,VerticalPixels}"
	TokenType = Expression
	TargetH = Yes
#	Token = "WIN8_FEATURE_SUPPORT" "=" "1"
End
TOKEN
	Name  = "SETUP_JPEG_LOGO_SUPPORT"
	Value  = "1"
	Help  = "JPEG Logo support in Setup."
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End
TOKEN
	Name  = "SETUP_BMP_LOGO_SUPPORT"
	Value  = "0"
	Help  = "BMP Logo support in Setup"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End
TOKEN
	Name  = "LOGO_FILE_NAME"
	Value  = "BIOS_CUSTOM\logo.jpg"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
    Name  = "SLP_MARKER_ROM_FILENAME"
    Value = "BIOS_CUSTOM\OA20Marker.bin"
    Help  = "SLP2.0 Marker key rom file"
    TokenType = File
    TargetMAK = Yes
End
TOKEN
    Name  = "SLP_PUBKEY_ROM_FILENAME"
    Value = "BIOS_CUSTOM\OA20PubKey.bin"
    Help  = "SLP2.0 Public key rom file"
    TokenType = File
    TargetMAK = Yes
End
TOKEN
	Name  = "T_ACPI_OEM_ID"
	Value  = "{'G','R','G','B',0x20,0x20}"
	Help  = "ACPI OEM Id -\a string value to be filled into ACPI table headers.\ If you want use spaces as leading or and trailing symbols \you must surround the whole expression in '|'. \For example | ABC  |. This will result in the generation of a \ #define ACPI_OEM_ID_MAK ' ABC  ' in the file Build\AcpiOemElinks.h \(created by Acpi.mak file). All tables generated by the \Acpi eModule will have the IDs with the values from \the generated file. To see how this works, refer to \the AcpiCore.c file and search for the string ACPI_OEM_ID_MAK. \Some modules which submit their own ACPI tables may \use the old method: CONVERT_TO_STRING(T_ACPI_OEM_ID). \If they are using this method, either '|' will be included \in their table's ID fields, or a build error will \occur because the two additional '|' characters \will make the string larger than the TableId size \of 6 characters. Contact the owners of the offending modules and /ask them to use ACPI_OEM_ID_MAK as it is used in AcpiCore.c."
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
	Range  = "1-6 characters"
End
TOKEN
	Name  = "T_ACPI_OEM_TBL_ID"
	Value  = "{'G','R','G','B','I','P','C',0x20}"
	Help  = "ACPI OEM TBL Id -\a string value to be filled into ACPI table headers.\ If you want use spaces as leading or and trailing symbols \you must surround the whole expression in '|'. \For example | ABC  |. This will result in the generation of a \ #define ACPI_OEM_TBL_ID_MAK ' ABC  ' in the file Build\AcpiOemElinks.h \(created by Acpi.mak file). All tables generated by the \Acpi eModule will have the IDs with the values from \the generated file. To see how this works, refer to \the AcpiCore.c file and search for the string ACPI_OEM_ID_MAK. \Some modules which submit their own ACPI tables may \use the old method: CONVERT_TO_STRING(T_ACPI_OEM_ID). \If they are using this method, either '|' will be included \in their table's ID fields, or a build error will \occur because the two additional '|' characters \will make the string larger than the TableId size \of 8 characters. Contact the owners of the offending modules and /ask them to use ACPI_OEM_TBL_ID_MAK as it is used in AcpiCore.c."
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
	Range  = "1-8 characters"
End
TOKEN
    Name = "SLP_STRING"
    Value = "GRGBankingIPC1"
    Help = "SLP string."
    TokenType = Expression
	TargetEQU = Yes
End

TOKEN
	Name  = "BBS_USB_DEVICE_TYPE_SUPPORT"
	Value  = "1"
	Help  = "Treat USB devices as a separate BBS device type"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "RemoveLegacyGptHddDevice"
	Value  = "1"
	Help  = "On. Filter GPT Format Hard disk of Legacy device."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "BOOT_FLOW_NORMAL_LAUNCH_DEFAULT_BOOTIMAGE"
	Value  = "0"
	Help  = "Support for UEFI specification v 2.3.1 section 3.4.1.1 and 3.4.1.2 to load the default boot image (efi\boot\boot####.efi) from any of the available file system if no boot option found. 1 = Enabling default image boot and 0 = Disabling default image boot."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SYSTEM_MANUFACTURER"
	Value  = "Deepware"
	Help  = "Specifies the System Manufacturer Name."
	TokenType = Expression
	TargetEQU = Yes
End
TOKEN
	Name  = "SYSTEM_PRODUCT_NAME"
	Value  = "DW01"
	Help  = "Specifies the System Product Name"
	TokenType = Expression
	TargetEQU = Yes
End
TOKEN
	Name  = "SYSTEM_VERSION"
	Value  = "V1.01"
	Help  = "Specifies the System Product Version."
	TokenType = Expression
	TargetEQU = Yes
End
TOKEN
	Name  = "BASE_BOARD_MANUFACTURER"
	Value  = "Deepware"
	Help  = "Specifies the Board Manufacturer."
	TokenType = Expression
	TargetEQU = Yes
	Token = "BASE_BOARD_INFO" "=" "1"
End
TOKEN
	Name  = "BASE_BOARD_PRODUCT_NAME"
	Value  = "DW01"
	Help  = "Specifies the Product Name"
	TokenType = Expression
	TargetEQU = Yes
	Token = "BASE_BOARD_INFO" "=" "1"
End
TOKEN
	Name  = "BASE_BOARD_VERSION"
	Value  = "V1.01"
	Help  = "Specifies the Product Version."
	TokenType = Expression
	TargetEQU = Yes
	Token = "BASE_BOARD_INFO" "=" "1"
#	Token = "NUMBER_OF_BASEBOARDS" "=" "1"
End

ELINK
	Name  = "$(BUILD_DIR)\Logo.ffs"
	Parent  = "FV_MAIN"
	InvokeOrder = AfterParent
	Disable = Yes
End

TOKEN
	Name  = "DEFAULT_QUIET_BOOT"
	Value  = "0"
	Help  = "Default value of the Quiet Boot option"
	TokenType = Boolean
	TargetH = Yes
#	Token = "WIN8_FEATURE_SUPPORT" "=" "1"
End
TOKEN
	Name  = "TSE_MULTILINE_CONTROLS"
	Value  = "1"
	Help  = "Turns on multi line controls. Currently subtitle and static text controls are supported. Default is DISABLE"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "DEFAULT_BOOT_TIMEOUT"
	Value  = "3"
	Help  = "Number of seconds that the firmware will wait before initiating the original default boot selection. \A value of 0 indicates that the default boot selection is to be initiated immediately on boot. \A value of 65535(0xFFFF) indicates that firmware will wait for user input before booting. \This means the default boot selection is not automatically started by the firmware."
	TokenType = Integer
	TargetH = Yes
	Range  = "0-65535"
End