path: root/Core/EM/FastBoot/FastBoot.sdl

TOKEN
	Name  = "POST_TIME_TUNING_SUPPORT"
	Value  = "1"
	Help  = "Main switch to enable Post Time Tuning module in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
	Master = Yes
End

TOKEN
	Name  = "FAST_BOOT_SUPPORT"
	Value  = "1"
	Help  = "Switch to enable FastBoot support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
	Lock = Yes
End

TOKEN
	Name  = "PTT_VER"
	Value  = "15"
	Help  = "PTT module version"
	TokenType = Integer
	TargetH = Yes
	Lock = Yes
End

TOKEN
	Name  = "MAX_SATA_DEVICE_COUNT"
	Value  = "8"
	Help  = "Max count of Sata device are stored in LastBoot variable"
	TokenType = Integer
	TargetH = Yes
	Lock = Yes
End

TOKEN
	Name  = "FAST_BOOT_TEST_MODE"
	Value  = "0"
	Help  = "Please enable toekn 'DXE_PERFORMANCE' and 'PEI_PERFORMANCE' before enable this token."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SKIP_TSE_HANDSHAKE"
	Value  = "0"
	Help  = "On: Skip TSE execution on fast boot path, \Logo will not be shown.\Use FASTBOOT_MODE_CHANGE_HOTKEY to change mode.\At least keep one console in and one console out, if user need to support password security during fastboot.\\OFF: Keep TSE execution on fast boot path, "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "ALLOW_FIRST_FASTBOOT_IN_S4"
	Value  = "1"
	Help  = "On: First FastBoot can be start when system power on from S4.\OFF: First FastBoot only can be start when system power on from S0."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "USB_SKIP_TABLE"
	Value  = "{{0, 0, 0, 0, 0, 0}}"
	Help  = "This Table is only used when SetupOption 'Partial Initial' is selected.\This structure must end with zero structure."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "FAST_BOOT_PCI_SKIP_LIST"
	Value  = "{{0x01,0xFF},{0x03,0xFF},{0x06,0xFF}}"
	Help  = "(EIP85135)When enabled XHCI support difficult into setup menu in fastboot mode'\{ClassCode,SubClassCode}\{0x01,0xFF}  Storage\{0x02,0xFF}  NetWrok\{0x03,0xFF}  VGA\{0x06,0xFF}  Bridge"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "FAST_BOOT_TSE_HOTKEY_SUPPORT"
	Value  = "1"
	Help  = "(EIP96276.6)Change FastBoot mode and enter setup by TSE hotkey"
	TokenType = Boolean
End

TOKEN
	Name  = "LAST_BOOT_FAIL_MECHANISM"
	Value  = "1"
	Help  = "(EIP98617)Enter setup automatically if previous fast boot fail."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "MAX_LAST_BOOT_FAIL_COUNT"
	Value  = "2"
	Help  = "Once fast boot fail count is reach this number, system will perform a full boot."
	TokenType = Integer
	TargetH = Yes
	Token = "LAST_BOOT_FAIL_MECHANISM" "=" "0"
End

TOKEN
	Name  = "OVERRIDE_FastBootLaunch"
	Value  = "1"
	Help  = "Fastboot Modules Overrides the FastBootLaunch() function of TSE"
	TokenType = Boolean
	TargetH = Yes
	Token = "SKIP_TSE_HANDSHAKE" "=" "0"
End

TOKEN
	Name  = "DEFAULT_FAST_BOOT"
	Value  = "0"
	Help  = "Default value of the Fast Boot option"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "DEFAULT_SATA_SUPPORT_SETTING"
	Value  = "1"
	Help  = "Default value of SATA Support option"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "DEFAULT_SATA_SUPPORT_SETTING"
	Value  = "2"
	Help  = "Default value of SATA Support option"
	TokenType = Integer
	TargetH = Yes
	Token = "SUPPORT_RAID_DRIVER" "=" "1"
End

TOKEN
	Name  = "DEFAULT_VGA_SUPPORT_SETTING"
	Value  = "1"
	Help  = "Default value of VGA Support option"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "DEFAULT_USB_SUPPORT_SETTING"
	Value  = "2"
	Help  = "Default value of USB Support option"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "DEFAULT_PS2_SUPPORT_SETTING"
	Value  = "1"
	Help  = "Default value of the PS2 Devices Support option"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "DEFAULT_NETWORK_STACK_SUPPORT_SETTING"
	Value  = "0"
	Help  = "Default value of NetWork Stack Driver Support option"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "COPY_ROM_TO_RAM_IN_PEI"
	Value  = "0"
	Help  = "Copy FV_BB and FV_MAIN to memory in PEI Phase, please disable it if PeiRamBoot is available in your project."
	TokenType = Boolean
End

TOKEN
	Name  = "CONNECT_EVERYTHING_IN_FASTBOOT"
	Value  = "1"
	Help  = "Connect all Pci Handles on fastboot path except the Pci class in the FAST_BOOT_PCI_SKIP_LIST"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SINGAL_ALL_DRIVERS_CONNECTED_EVENT"
	Value  = "1"
	Help  = "Signal BDS_ALL_DRIVERS_CONNECTED_PROTOCOL_GUID on fastboot path"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "CALL_DISPATCHER_AGAIN_IN_FASTBOOT"
	Value  = "1"
	Help  = "Call DXE dispatcher again on fastboot path"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "AMILEGACY16_FASTBOOT_SOLUTION"
	Value  = "0"
	Help  = "CMOS 0x38 will used to store fastboot flag.\For legacy fast boot some changes in CSM module are required "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "IS_VALID_FASTBOOT_BOOT_OPTION_FUNC"
	Value  = "IsValidFastBootOption"
	Help  = "Function to validate fastboot boot option"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SUPPORT_RAID_DRIVER"
	Value  = "0"
	Help  = "Check if support for raid driver."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "FASTBOOT_NEED_RESTART"
	Value  = "0"
	Help  = "Check if need to restart."
	TokenType = Boolean
	TargetH = Yes
End

PATH
	Name  = "FastBoot_DIR"
	Help  = "Path to FastBoot Module in Project"
End

MODULE
	Help  = "Includes FastBoot.mak to Project"
	File  = "FastBoot.mak"
End

MODULE
	Help  = "Includes FastBootPei.mak to Project"
	File  = "FastBootPei.mak"
End

ELINK
	Name  = "$(FastBoot_DIR)\FastBoot.sd"
	Parent  = "SETUP_DEFINITIONS"
	Priority  = 0
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(BUILD_DIR)\FastBootPei.ffs"
	Parent  = "$(BUILD_DIR)\CPUPEI.ffs"
	Priority  = 0
	Token = "COPY_ROM_TO_RAM_IN_PEI" "=" "1"
	InvokeOrder = BeforeParent
End

ELINK
	Name  = "FastBootEntry,"
	Parent  = "RuntimeInitialize"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "FastBootConInAvailHook,"
	Parent  = "ProcessConInAvailability,"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "FastBootBbsBootHook,"
	Parent  = "BbsBoot,"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "FastBootMinisetupDriverEntryHook,"
	Parent  = "MinisetupDriverEntryHookHook,"
	Help  = "(EIP63924)Add an Elink for install fast boot tse protocol"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(BUILD_DIR)\FastBoot.sdb"
	Parent  = "SETUP_SDBS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "IsFastBootDefault,"
	Parent  = "IsFastBootList"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "IsAmtBoot,"
	Parent  = "IsFastBootList"
	InvokeOrder = AfterParent
	Token = "iAMT_SUPPORT" "=" "1" 
End

ELINK
	Name  = "CheckPostManagerKey,"
	Parent  = "FastBootCheckModeChangeList"
	Token = "FAST_BOOT_TSE_HOTKEY_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End



ELINK
	Name  = "FbConnectEverything,"
	Parent  = "BeforeConnectFastBootDeviceHook"
	Help  = "(EIP85135)When enabled XHCI support difficult into setup menu in fastboot mode"
	Token = "CONNECT_EVERYTHING_IN_FASTBOOT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "CallTheDispatcher,"
	Parent  = "FastBootAfterAllDriverConnctHook"
	Token = "CALL_DISPATCHER_AGAIN_IN_FASTBOOT" "=" "1"
	Token = "CORE_COMBINED_VERSION" ">" "0x40280"
	InvokeOrder = BeforeParent
End

ELINK
	Name  = "SignalAllDriversConnectedEvent,"
	Parent  = "FastBootAfterAllDriverConnctHook"
	Token = "SINGAL_ALL_DRIVERS_CONNECTED_EVENT" "=" "1"
	Token = "CORE_COMBINED_VERSION" ">" "0x40280"
	InvokeOrder = BeforeParent
End

ELINK
	Name  = "FastBootDxeEntry,"
	Parent  = "DxeCoreInitialize"
	Priority  = -255
	Token = "COPY_ROM_TO_RAM_IN_PEI" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "IsFastBootList"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "FastBootAfterAllDriverConnctHook"
	Help  = "(EIP62683)Add an Elink after all driver connect in PTT module"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "FastBootCheckModeChangeList"
	Help  = "(EIP63924)Add an Elink for check mode change in PTT module"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "BeforeConnectFastBootDeviceHook"
	Help  = "(EIP62845)Connect all sata devices in fastboot"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ResetFastBootVariable,"
	Parent  = "ReturnNormalMode"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "DisconnectUsbController,"
	Parent  = "ReturnNormalMode"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ReturnNormalMode"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "BeforeBDSFlow,"
	Parent  = "BDS_CONTROL_FLOW"
	InvokeOrder = BeforeParent
End

ELINK
	Name  = "InitialRebootCount,"
	Parent  = "ProcessEnterSetupHook,"
	InvokeOrder = AfterParent
	Token = "FASTBOOT_NEED_RESTART" "=" "1"
End