summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
authorarch import user (historical) <svn@openbios.org>2005-07-06 17:15:54 +0000
committerarch import user (historical) <svn@openbios.org>2005-07-06 17:15:54 +0000
commit1c8cd59f3c9248f0954a5cf215dc3652ccfc8da5 (patch)
tree7c19d8a922e2d0613a494c5949b2b6f45c388e13 /src/northbridge
parent7e5fbd6fc03df87c9276b08219ca15ad17c43dac (diff)
downloadcoreboot-1c8cd59f3c9248f0954a5cf215dc3652ccfc8da5.tar.xz
Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-38
Creator: Li-Ta Lo <ollie@lanl.gov> emulator update x96emu update from Paulo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/via/vt8601/northbridge.c4
-rw-r--r--src/northbridge/via/vt8601/raminit.c213
2 files changed, 110 insertions, 107 deletions
diff --git a/src/northbridge/via/vt8601/northbridge.c b/src/northbridge/via/vt8601/northbridge.c
index cf8e82907c..b578a975e4 100644
--- a/src/northbridge/via/vt8601/northbridge.c
+++ b/src/northbridge/via/vt8601/northbridge.c
@@ -29,6 +29,8 @@ static void northbridge_init(device_t dev)
pci_write_config8(dev, 0x76, 0x52);
}
+
+
static struct device_operations northbridge_operations = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
@@ -44,6 +46,8 @@ static struct pci_driver northbridge_driver __pci_driver = {
.device = 0x0601, /* 0x8601 is the AGP bridge? */
};
+
+
#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
static void pci_domain_read_resources(device_t dev)
diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c
index 1aa58224f7..71ac010156 100644
--- a/src/northbridge/via/vt8601/raminit.c
+++ b/src/northbridge/via/vt8601/raminit.c
@@ -47,30 +47,32 @@ it with the version available from LANL.
#define DIMM_CL2 0
#endif
-void dimms_read(unsigned long x)
+void dimms_read(unsigned long x)
{
uint8_t c;
- unsigned long eax;
+ unsigned long eax;
volatile unsigned long y;
- eax = x;
- for (c = 0; c < 6; c++) {
- y = *(volatile unsigned long *) eax;
+ eax = x;
+ for(c = 0; c < 6; c++) {
+ y = * (volatile unsigned long *) eax;
eax += 0x10000000;
}
}
-void dimms_write(int x)
+void dimms_write(int x)
{
uint8_t c;
unsigned long eax = x;
- for (c = 0; c < 6; c++) {
+ for(c = 0; c < 6; c++) {
*(volatile unsigned long *) eax = 0;
eax += 0x10000000;
}
}
+
+
#ifdef DEBUG_SETNORTHB
-void setnorthb(device_t north, uint8_t reg, uint8_t val)
+void setnorthb(device_t north, uint8_t reg, uint8_t val)
{
print_debug("setnorth: reg ");
print_debug_hex8(reg);
@@ -83,108 +85,108 @@ void setnorthb(device_t north, uint8_t reg, uint8_t val)
#define setnorthb pci_write_config8
#endif
-void dumpnorth(device_t north)
+void
+dumpnorth(device_t north)
{
unsigned int r, c;
- for (r = 0;; r += 16) {
+ for(r = 0; ; r += 16) {
print_debug_hex8(r);
print_debug(":");
- for (c = 0; c < 16; c++) {
- print_debug_hex8(pci_read_config8(north, r + c));
+ for(c = 0; c < 16; c++) {
+ print_debug_hex8(pci_read_config8(north, r+c));
print_debug(" ");
}
print_debug("\r\n");
if (r >= 240)
break;
- }
+ }
}
-static void sdram_set_registers(const struct mem_controller *ctrl)
+static void sdram_set_registers(const struct mem_controller *ctrl)
{
- device_t north = (device_t) PCI_DEV(0, 0, 0);
+ device_t north = (device_t) 0;
uint8_t c, r;
print_err("vt8601 init starting\r\n");
+ north = pci_locate_device(PCI_ID(0x1106, 0x8601), 0);
+ north = 0;
print_debug_hex32(north);
print_debug(" is the north\n");
print_debug_hex16(pci_read_config16(north, 0));
print_debug(" ");
print_debug_hex16(pci_read_config16(north, 2));
print_debug("\r\n");
-
+
/* All we are doing now is setting initial known-good values that will
* be revised later as we read SPD
- */
-
+ */
// memory clk enable. We are not using ECC
- pci_write_config8(north, 0x78, 0x01);
+ pci_write_config8(north,0x78, 0x01);
print_debug_hex8(pci_read_config8(north, 0x78));
-
// dram control, see the book.
#if DIMM_PC133
- pci_write_config8(north, 0x68, 0x52);
+ pci_write_config8(north,0x68, 0x52);
#else
- pci_write_config8(north, 0x68, 0x42);
+ pci_write_config8(north,0x68, 0x42);
#endif
-
// dram control, see the book.
- pci_write_config8(north, 0x6B, 0x0c);
-
+ pci_write_config8(north,0x6B, 0x0c);
// Initial setting, 256MB in each bank, will be rewritten later.
- pci_write_config8(north, 0x5A, 0x20);
+ pci_write_config8(north,0x5A, 0x20);
print_debug_hex8(pci_read_config8(north, 0x5a));
- pci_write_config8(north, 0x5B, 0x40);
- pci_write_config8(north, 0x5C, 0x60);
- pci_write_config8(north, 0x5D, 0x80);
- pci_write_config8(north, 0x5E, 0xA0);
- pci_write_config8(north, 0x5F, 0xC0);
+ pci_write_config8(north,0x5B, 0x40);
+ pci_write_config8(north,0x5C, 0x60);
+ pci_write_config8(north,0x5D, 0x80);
+ pci_write_config8(north,0x5E, 0xA0);
+ pci_write_config8(north,0x5F, 0xC0);
// It seems we have to take care of these 2 registers as if
// they are bank 6 and 7.
- pci_write_config8(north, 0x56, 0xC0);
- pci_write_config8(north, 0x57, 0xC0);
-
+ pci_write_config8(north,0x56, 0xC0);
+ pci_write_config8(north,0x57, 0xC0);
+
// SDRAM in all banks
- pci_write_config8(north, 0x60, 0x3F);
-
+ pci_write_config8(north,0x60, 0x3F);
// DRAM timing. I'm suspicious of this
// This is for all banks, 64 is 0,1. 65 is 2,3. 66 is 4,5.
// ras precharge 4T, RAS pulse 5T
// cas2 is 0xd6, cas3 is 0xe6
// we're also backing off write pulse width to 2T, so result is 0xee
#if DIMM_CL2
- pci_write_config8(north, 0x64, 0xd4);
- pci_write_config8(north, 0x65, 0xd4);
- pci_write_config8(north, 0x66, 0xd4);
-#else // CL=3
- pci_write_config8(north, 0x64, 0xe4);
- pci_write_config8(north, 0x65, 0xe4);
- pci_write_config8(north, 0x66, 0xe4);
+ pci_write_config8(north,0x64, 0xd4);
+ pci_write_config8(north,0x65, 0xd4);
+ pci_write_config8(north,0x66, 0xd4);
+#else // CL=3
+ pci_write_config8(north,0x64, 0xe4);
+ pci_write_config8(north,0x65, 0xe4);
+ pci_write_config8(north,0x66, 0xe4);
#endif
// dram frequency select.
// enable 4K pages for 64M dram.
#if DIMM_PC133
- pci_write_config8(north, 0x69, 0x3c);
+ pci_write_config8(north,0x69, 0x3c);
#else
- pci_write_config8(north, 0x69, 0xac);
+ pci_write_config8(north,0x69, 0xac);
#endif
/* IMPORTANT -- disable refresh counter */
// refresh counter, disabled.
- pci_write_config8(north, 0x6A, 0x00);
+ pci_write_config8(north,0x6A, 0x00);
+
// clkenable configuration. kevinh FIXME - add precharge
- pci_write_config8(north, 0x6C, 0x00);
+ pci_write_config8(north,0x6C, 0x00);
// dram read latch delay of 1 ns, MD drive 8 mA,
- // high drive strength on MA[2: 13], we#, cas#, ras#
+ // high drive strength on MA[2: 13], we#, cas#, ras#
// As per Cindy Lee, set to 0x37, not 0x57
- pci_write_config8(north, 0x6D, 0x7f);
+ pci_write_config8(north,0x6D, 0x7f);
}
/* slot is the dram slot. Return size of side0 in lower 16-bit,
* side1 in upper 16-bit, in units of 8MB */
-static unsigned long spd_module_size(unsigned char slot)
-{
+static unsigned long
+spd_module_size(unsigned char slot)
+{
/* for all the DRAMS, see if they are there and get the size of each
* module. This is just a very early first cut at sizing.
*/
@@ -193,24 +195,21 @@ static unsigned long spd_module_size(unsigned char slot)
unsigned int value = 0;
/* unsigned int module = ((0x50 + slot) << 1) + 1; */
unsigned int module = 0x50 + slot;
-
/* is the module there? if byte 2 is not 4, then we'll assume it
* is useless.
*/
- print_info("Slot ");
- print_info_hex8(slot);
+ print_info("Slot ");
+ print_info_hex8(slot);
if (smbus_read_byte(module, 2) != 4) {
print_info(" is empty\r\n");
return 0;
}
print_info(" is SDRAM ");
-
+
banks = smbus_read_byte(module, 17);
-
/* we're going to assume symmetric banks. Sorry. */
- cols = smbus_read_byte(module, 4) & 0xf;
- rows = smbus_read_byte(module, 3) & 0xf;
-
+ cols = smbus_read_byte(module, 4) & 0xf;
+ rows = smbus_read_byte(module, 3) & 0xf;
/* grand total. You have rows+cols addressing, * times of banks, times
* width of data in bytes */
/* Width is assumed to be 64 bits == 8 bytes */
@@ -230,8 +229,10 @@ static unsigned long spd_module_size(unsigned char slot)
}
-static int spd_num_chips(unsigned char slot)
-{
+static int
+spd_num_chips(unsigned char slot)
+{
+/* unsigned int module = ((0x50 + slot) << 1) + 1; */
unsigned int module = 0x50 + slot;
unsigned int width;
@@ -248,21 +249,20 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
unsigned char timing = 0xe4;
/* read Trp */
val = smbus_read_byte(0x50, 27);
- if (val < 2 * T133)
+ if (val < 2*T133)
Trp = 1;
val = smbus_read_byte(0x50, 30);
- if (val < 5 * T133)
+ if (val < 5*T133)
Tras = 0;
val = smbus_read_byte(0x50, 18);
if (val < 8)
casl = 1;
if (val < 4)
casl = 0;
-
+
val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4;
-
- print_debug_hex8(val);
- print_debug(" is the computed timing\n");
+
+ print_debug_hex8(val); print_debug(" is the computed timing\n");
/* don't set it. Experience shows that this screwy chipset should just
* be run with the most conservative timing.
* pci_write_config8(0, 0x64, val);
@@ -271,23 +271,23 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
static void set_ma_mapping(device_t north, int slot, int type)
{
- unsigned char reg, val;
- int shift;
-
- reg = 0x58 + slot / 2;
- if (slot % 2 >= 1)
- shift = 0;
- else
- shift = 4;
-
- val = pci_read_config8(north, reg);
- val &= ~(0xf << shift);
- val |= type << shift;
- pci_write_config8(north, reg, val);
+ unsigned char reg, val;
+ int shift;
+
+ reg = 0x58 + slot/2;
+ if (slot%2 >= 1)
+ shift = 0;
+ else
+ shift = 4;
+
+ val = pci_read_config8(north, reg);
+ val &= ~(0xf << shift);
+ val |= type << shift;
+ pci_write_config8(north, reg, val);
}
-static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
unsigned char i;
static const uint8_t ramregs[] = {
@@ -295,30 +295,29 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
};
device_t north = 0;
uint32_t size, base, slot, ma;
- /* begin to initialize */
-
+ /* begin to initialize*/
// I forget why we need this, but we do
dimms_write(0xa55a5aa5);
-
- /* set NOP */
- pci_write_config8(north, 0x6C, 0x01);
+
+ /* set NOP*/
+ pci_write_config8(north,0x6C, 0x01);
print_debug("NOP\r\n");
- /* wait 200us */
+ /* wait 200us*/
// You need to do the memory reference. That causes the nop cycle.
dimms_read(0);
udelay(400);
print_debug("PRECHARGE\r\n");
/* set precharge */
- pci_write_config8(north, 0x6C, 0x02);
+ pci_write_config8(north,0x6C, 0x02);
print_debug("DUMMY READS\r\n");
- /* dummy reads */
+ /* dummy reads*/
dimms_read(0);
udelay(200);
print_debug("CBR\r\n");
- /* set CBR */
- pci_write_config8(north, 0x6C, 0x04);
-
- /* do 8 reads and wait >100us between each - from via */
+ /* set CBR*/
+ pci_write_config8(north,0x6C, 0x04);
+
+ /* do 8 reads and wait >100us between each - from via*/
dimms_read(0);
udelay(200);
dimms_read(0);
@@ -336,43 +335,43 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
dimms_read(0);
udelay(200);
print_debug("MRS\r\n");
- /* set MRS */
- pci_write_config8(north, 0x6c, 0x03);
+ /* set MRS*/
+ pci_write_config8(north,0x6c, 0x03);
#if DIMM_CL2
dimms_read(0x150);
-#else // CL=3
+#else // CL=3
dimms_read(0x1d0);
#endif
udelay(200);
print_debug("NORMAL\r\n");
/* set to normal mode */
- pci_write_config8(north, 0x6C, 0x08);
-
+ pci_write_config8(north,0x6C, 0x08);
+
dimms_write(0x55aa55aa);
dimms_read(0);
udelay(200);
print_debug("set ref. rate\r\n");
// Set the refresh rate.
#if DIMM_PC133
- pci_write_config8(north, 0x6A, 0x86);
+ pci_write_config8(north,0x6A, 0x86);
#else
- pci_write_config8(north, 0x6A, 0x65);
+ pci_write_config8(north,0x6A, 0x65);
#endif
print_debug("enable multi-page open\r\n");
// enable multi-page open
- pci_write_config8(north, 0x6B, 0x0d);
-
+ pci_write_config8(north,0x6B, 0x0d);
+
base = 0;
- for (slot = 0; slot < 4; slot++) {
+ for(slot = 0; slot < 4; slot++) {
size = spd_module_size(slot);
/* side 0 */
base += size & 0xffff;
- pci_write_config8(north, ramregs[2 * slot], base);
+ pci_write_config8(north, ramregs[2*slot], base);
/* side 1 */
base += size >> 16;
if (base > 0xff)
base = 0xff;
- pci_write_config8(north, ramregs[2 * slot + 1], base);
+ pci_write_config8(north, ramregs[2*slot + 1], base);
if (!size)
continue;
@@ -380,13 +379,13 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
/* Calculate the value of MA mapping type register,
* based on size of SDRAM chips. */
size = (size & 0xffff) << (3 + 3);
- /* convert module size to be in Mbits */
+ /* convert module size to be in Mbits */
size /= spd_num_chips(slot);
print_debug_hex16(size);
print_debug(" is the chip size\r\n");
if (size < 64)
ma = 0;
- else if (size < 256)
+ if (size < 256)
ma = 8;
else
ma = 0xe;