Revert "Add support for Intel Ibex Peak (Mobile 5) southbridge"

This reverts commit 0210119b4b95e84f954cfd6dc11aafbc187421af

Change-Id: I5be3f2a54394c592650a0dcd671e4a72ae796cb2
Reviewed-on: http://review.coreboot.org/3443
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 0 insertions, 372 deletions

diff --git a/src/southbridge/intel/ibexpeak/azalia.c b/src/southbridge/intel/ibexpeak/azalia.c
deleted file mode 100644
index 6662df4990..0000000000
--- a/src/southbridge/intel/ibexpeak/azalia.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <delay.h>
-#include "pch.h"
-
-#define HDA_ICII_REG 0x68
-#define   HDA_ICII_BUSY (1 << 0)
-#define   HDA_ICII_VALID  (1 << 1)
-
-typedef struct southbridge_intel_ibexpeak_config config_t;
-
-static int set_bits(u32 port, u32 mask, u32 val)
-{
-	u32 reg32;
-	int count;
-
-	/* Write (val & mask) to port */
-	val &= mask;
-	reg32 = read32(port);
-	reg32 &= ~mask;
-	reg32 |= val;
-	write32(port, reg32);
-
-	/* Wait for readback of register to
-	 * match what was just written to it
-	 */
-	count = 50;
-	do {
-		/* Wait 1ms based on BKDG wait time */
-		mdelay(1);
-		reg32 = read32(port);
-		reg32 &= mask;
-	} while ((reg32 != val) && --count);
-
-	/* Timeout occurred */
-	if (!count)
-		return -1;
-	return 0;
-}
-
-static int codec_detect(u32 base)
-{
-	u8 reg8;
-
-	/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
-	if (set_bits(base + 0x08, 1, 1) == -1)
-		goto no_codec;
-
-	/* Write back the value once reset bit is set. */
-	write16(base + 0x0, read16(base + 0x0));
-
-	/* Read in Codec location (BAR + 0xe)[2..0]*/
-	reg8 = read8(base + 0xe);
-	reg8 &= 0x0f;
-	if (!reg8)
-		goto no_codec;
-
-	return reg8;
-
-no_codec:
-	/* Codec Not found */
-	/* Put HDA back in reset (BAR + 0x8) [0] */
-	set_bits(base + 0x08, 1, 0);
-	printk(BIOS_DEBUG, "Azalia: No codec!\n");
-	return 0;
-}
-
-const u32 * cim_verb_data = NULL;
-u32 cim_verb_data_size = 0;
-const u32 * pc_beep_verbs = NULL;
-u32 pc_beep_verbs_size = 0;
-
-static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb)
-{
-	int idx=0;
-
-	while (idx < (cim_verb_data_size / sizeof(u32))) {
-		u32 verb_size = 4 * cim_verb_data[idx+2]; // in u32
-		if (cim_verb_data[idx] != viddid) {
-			idx += verb_size + 3; // skip verb + header
-			continue;
-		}
-		*verb = &cim_verb_data[idx+3];
-		return verb_size;
-	}
-
-	/* Not all codecs need to load another verb */
-	return 0;
-}
-
-/**
- *  Wait 50usec for the codec to indicate it is ready
- *  no response would imply that the codec is non-operative
- */
-
-static int wait_for_ready(u32 base)
-{
-	/* Use a 1msec timeout */
-
-	int timeout = 1000;
-
-	while(timeout--) {
-		u32 reg32 = read32(base +  HDA_ICII_REG);
-		if (!(reg32 & HDA_ICII_BUSY))
-			return 0;
-		udelay(1);
-	}
-
-	return -1;
-}
-
-/**
- *  Wait 50usec for the codec to indicate that it accepted
- *  the previous command.  No response would imply that the code
- *  is non-operative
- */
-
-static int wait_for_valid(u32 base)
-{
-	u32 reg32;
-
-	/* Send the verb to the codec */
-	reg32 = read32(base + HDA_ICII_REG);
-	reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
-	write32(base + HDA_ICII_REG, reg32);
-
-	/* Use a 1msec timeout */
-
-	int timeout = 1000;
-	while(timeout--) {
-		reg32 = read32(base + HDA_ICII_REG);
-		if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
-			HDA_ICII_VALID)
-			return 0;
-		udelay(1);
-	}
-
-	return -1;
-}
-
-static void codec_init(struct device *dev, u32 base, int addr)
-{
-	u32 reg32;
-	const u32 *verb;
-	u32 verb_size;
-	int i;
-
-	printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr);
-
-	/* 1 */
-	if (wait_for_ready(base) == -1) {
-		printk(BIOS_DEBUG, "  codec not ready.\n");
-		return;
-	}
-
-	reg32 = (addr << 28) | 0x000f0000;
-	write32(base + 0x60, reg32);
-
-	if (wait_for_valid(base) == -1) {
-		printk(BIOS_DEBUG, "  codec not valid.\n");
-		return;
-	}
-
-	reg32 = read32(base + 0x64);
-
-	/* 2 */
-	printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32);
-	verb_size = find_verb(dev, reg32, &verb);
-
-	if (!verb_size) {
-		printk(BIOS_DEBUG, "Azalia: No verb!\n");
-		return;
-	}
-	printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size);
-
-	/* 3 */
-	for (i = 0; i < verb_size; i++) {
-		if (wait_for_ready(base) == -1)
-			return;
-
-		write32(base + 0x60, verb[i]);
-
-		if (wait_for_valid(base) == -1)
-			return;
-	}
-	printk(BIOS_DEBUG, "Azalia: verb loaded.\n");
-}
-
-static void codecs_init(struct device *dev, u32 base, u32 codec_mask)
-{
-	int i;
-	for (i = 3; i >= 0; i--) {
-		if (codec_mask & (1 << i))
-			codec_init(dev, base, i);
-	}
-
-	for (i = 0; i < pc_beep_verbs_size; i++) {
-		if (wait_for_ready(base) == -1)
-			return;
-
-		write32(base + 0x60, pc_beep_verbs[i]);
-
-		if (wait_for_valid(base) == -1)
-			return;
-	}
-}
-
-static void azalia_init(struct device *dev)
-{
-	u32 base;
-	struct resource *res;
-	u32 codec_mask;
-	u8 reg8;
-	u16 reg16;
-	u32 reg32;
-
-	/* Find base address */
-	res = find_resource(dev, PCI_BASE_ADDRESS_0);
-	if (!res)
-		return;
-
-	// NOTE this will break as soon as the Azalia get's a bar above
-	// 4G. Is there anything we can do about it?
-	base = (u32)res->base;
-	printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base);
-
-	if (RCBA32(0x2030) & (1 << 31)) {
-		reg32 = pci_mmio_read_config32(dev, 0x120);
-		reg32 &= 0xf8ffff01;
-		reg32 |= (1 << 24); // 2 << 24 for server
-		reg32 |= RCBA32(0x2030) & 0xfe;
-		pci_mmio_write_config32(dev, 0x120, reg32);
-
-		reg16 = pci_mmio_read_config16(dev, 0x78);
-		reg16 |= (1 << 11);
-		pci_mmio_write_config16(dev, 0x78, reg16);
-	} else
-		printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");
-
-	reg32 = pci_mmio_read_config32(dev, 0x114);
-	reg32 &= ~0xfe;
-	pci_mmio_write_config32(dev, 0x114, reg32);
-
-	// Set VCi enable bit
-	reg32 = pci_mmio_read_config32(dev, 0x120);
-	reg32 |= (1 << 31);
-	pci_mmio_write_config32(dev, 0x120, reg32);
-
-	// Enable HDMI codec:
-	reg32 = pci_read_config32(dev, 0xc4);
-	reg32 |= (1 << 1);
-	pci_write_config32(dev, 0xc4, reg32);
-
-	reg8 = pci_read_config8(dev, 0x43);
-	reg8 |= (1 << 6);
-	pci_write_config8(dev, 0x43, reg8);
-
-	/* Additional programming steps */
-	reg32 = pci_read_config32(dev, 0xc4);
-	reg32 |= (1 << 13);
-	pci_write_config32(dev, 0xc4, reg32);
-
-	reg32 = pci_read_config32(dev, 0xc4);
-	reg32 |= (1 << 10);
-	pci_write_config32(dev, 0xc4, reg32);
-
-	reg32 = pci_read_config32(dev, 0xd0);
-	reg32 &= ~(1 << 31);
-	pci_write_config32(dev, 0xd0, reg32);
-
-	if (dev->device == 0x1e20) {
-		/* Additional step on Panther Point */
-		reg32 = pci_read_config32(dev, 0xc4);
-		reg32 |= (1 << 17);
-		pci_write_config32(dev, 0xc4, reg32);
-	}
-
-	/* Set Bus Master */
-	reg32 = pci_read_config32(dev, PCI_COMMAND);
-	pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
-
-	pci_write_config8(dev, 0x3c, 0x0a); // unused?
-
-	/* Codec Initialization Programming Sequence */
-
-	/* Take controller out of reset */
-	reg32 = read32(base + 0x08);
-	reg32 |= (1 << 0);
-	write32(base + 0x08, reg32);
-	/* Wait 1ms */
-	udelay(1000);
-
-	//
-	reg8 = pci_read_config8(dev, 0x40); // Audio Control
-	reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb
-	pci_write_config8(dev, 0x40, reg8);
-
-	reg8 = pci_read_config8(dev, 0x4d); // Docking Status
-	reg8 &= ~(1 << 7); // Docking not supported
-	pci_write_config8(dev, 0x4d, reg8);
-
-	codec_mask = codec_detect(base);
-
-	if (codec_mask) {
-		printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
-		codecs_init(dev, base, codec_mask);
-	}
-
-	/* Enable dynamic clock gating */
-	reg8 = pci_read_config8(dev, 0x43);
-	reg8 &= ~0x7;
-	reg8 |= (1 << 2) | (1 << 0);
-	pci_write_config8(dev, 0x43, reg8);
-}
-
-static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
-	if (!vendor || !device) {
-		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
-				pci_read_config32(dev, PCI_VENDOR_ID));
-	} else {
-		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
-				((device & 0xffff) << 16) | (vendor & 0xffff));
-	}
-}
-
-static struct pci_operations azalia_pci_ops = {
-	.set_subsystem    = azalia_set_subsystem,
-};
-
-static struct device_operations azalia_ops = {
-	.read_resources		= pci_dev_read_resources,
-	.set_resources		= pci_dev_set_resources,
-	.enable_resources	= pci_dev_enable_resources,
-	.init			= azalia_init,
-	.scan_bus		= 0,
-	.ops_pci		= &azalia_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = { 0x3b56, 0 };
-
-static const struct pci_driver pch_azalia __pci_driver = {
-	.ops	 = &azalia_ops,
-	.vendor	 = PCI_VENDOR_ID_INTEL,
-	.devices = pci_device_ids,
-};
-