src/southbridge: Get rid of device_t

Use of device_t is deprecated.

Change-Id: Ib4db9c263ff156966926f9576eed7e3cfb02e78a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/30045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

3 files changed, 50 insertions, 18 deletions

diff --git a/src/southbridge/intel/lynxpoint/me_9.x.c b/src/southbridge/intel/lynxpoint/me_9.x.c
index 574a8308d6..1a0a68c9db 100644
--- a/src/southbridge/intel/lynxpoint/me_9.x.c
+++ b/src/southbridge/intel/lynxpoint/me_9.x.c
@@ -52,12 +52,16 @@ static const char *me_bios_path_values[] = {
 	[ME_DISABLE_BIOS_PATH]		= "Disable",
 	[ME_FIRMWARE_UPDATE_BIOS_PATH]	= "Firmware Update",
 };
-static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev);
+static int intel_me_read_mbp(me_bios_payload *mbp_data, struct device *dev);
 #endif
 
 /* MMIO base address for MEI interface */
 static u32 *mei_base_address;
-void intel_me_mbp_clear(device_t dev);
+#ifdef __SIMPLE_DEVICE__
+void intel_me_mbp_clear(pci_devfn_t dev);
+#else
+void intel_me_mbp_clear(struct device *dev);
+#endif
 
 #if IS_ENABLED(CONFIG_DEBUG_INTEL_ME)
 static void mei_dump(void *ptr, int dword, int offset, const char *type)
@@ -112,7 +116,11 @@ static inline void mei_write_dword_ptr(void *ptr, int offset)
 	mei_dump(ptr, dword, offset, "WRITE");
 }
 
-static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset)
+#ifdef __SIMPLE_DEVICE__
+static inline void pci_read_dword_ptr(pci_devfn_t dev, void *ptr, int offset)
+#else
+static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset)
+#endif
 {
 	u32 dword = pci_read_config32(dev, offset);
 	memcpy(ptr, &dword, sizeof(dword));
@@ -413,7 +421,11 @@ static inline int mei_sendrecv_mkhi(struct mkhi_header *mkhi,
  * mbp give up routine. This path is taken if hfs.mpb_rdy is 0 or the read
  * state machine on the BIOS end doesn't match the ME's state machine.
  */
-static void intel_me_mbp_give_up(device_t dev)
+#ifdef __SIMPLE_DEVICE__
+static void intel_me_mbp_give_up(pci_devfn_t dev)
+#else
+static void intel_me_mbp_give_up(struct device *dev)
+#endif
 {
 	struct mei_csr csr;
 
@@ -429,7 +441,11 @@ static void intel_me_mbp_give_up(device_t dev)
  * mbp clear routine. This will wait for the ME to indicate that
  * the MBP has been read and cleared.
  */
-void intel_me_mbp_clear(device_t dev)
+#ifdef __SIMPLE_DEVICE__
+void intel_me_mbp_clear(pci_devfn_t dev)
+#else
+void intel_me_mbp_clear(struct device *dev)
+#endif
 {
 	int count;
 	struct me_hfs2 hfs2;
@@ -657,7 +673,7 @@ static int me_icc_set_clock_enables(u32 mask)
 }
 
 /* Determine the path that we should take based on ME status */
-static me_bios_path intel_me_path(device_t dev)
+static me_bios_path intel_me_path(struct device *dev)
 {
 	me_bios_path path = ME_DISABLE_BIOS_PATH;
 	struct me_hfs hfs;
@@ -727,7 +743,7 @@ static me_bios_path intel_me_path(device_t dev)
 }
 
 /* Prepare ME for MEI messages */
-static int intel_mei_setup(device_t dev)
+static int intel_mei_setup(struct device *dev)
 {
 	struct resource *res;
 	struct mei_csr host;
@@ -757,7 +773,7 @@ static int intel_mei_setup(device_t dev)
 }
 
 /* Read the Extend register hash of ME firmware */
-static int intel_me_extend_valid(device_t dev)
+static int intel_me_extend_valid(struct device *dev)
 {
 	struct me_heres status;
 	u32 extend[8] = {0};
@@ -804,7 +820,7 @@ static int intel_me_extend_valid(device_t dev)
 }
 
 /* Check whether ME is present and do basic init */
-static void intel_me_init(device_t dev)
+static void intel_me_init(struct device *dev)
 {
 	struct southbridge_intel_lynxpoint_config *config = dev->chip_info;
 	me_bios_path path = intel_me_path(dev);
@@ -857,7 +873,8 @@ static void intel_me_init(device_t dev)
 	 */
 }
 
-static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+static void set_subsystem(struct device *dev, unsigned int vendor,
+			  unsigned int device)
 {
 	if (!vendor || !device) {
 		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
@@ -872,7 +889,7 @@ static struct pci_operations pci_ops = {
 	.set_subsystem = set_subsystem,
 };
 
-static void intel_me_enable(device_t dev)
+static void intel_me_enable(struct device *dev)
 {
 	/* Avoid talking to the device in S3 path */
 	if (acpi_is_wakeup_s3()) {
@@ -939,7 +956,7 @@ struct mbp_payload {
  * mbp seems to be following its own flow, let's retrieve it in a dedicated
  * function.
  */
-static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev)
+static int intel_me_read_mbp(me_bios_payload *mbp_data, struct device *dev)
 {
 	mbp_header mbp_hdr;
 	u32 me2host_pending;
diff --git a/src/southbridge/intel/lynxpoint/pch.c b/src/southbridge/intel/lynxpoint/pch.c
index cb01de7496..6596aa2f5d 100644
--- a/src/southbridge/intel/lynxpoint/pch.c
+++ b/src/southbridge/intel/lynxpoint/pch.c
@@ -23,14 +23,17 @@
 #include <device/pci_def.h>
 #include "pch.h"
 
-static device_t pch_get_lpc_device(void)
+#ifdef __SIMPLE_DEVICE__
+static pci_devfn_t pch_get_lpc_device(void)
 {
-#ifdef __SMM__
 	return PCI_DEV(0, 0x1f, 0);
+}
 #else
+static struct device *pch_get_lpc_device(void)
+{
 	return dev_find_slot(0, PCI_DEVFN(0x1f, 0));
-#endif
 }
+#endif
 
 int pch_silicon_revision(void)
 {
diff --git a/src/southbridge/intel/lynxpoint/usb_xhci.c b/src/southbridge/intel/lynxpoint/usb_xhci.c
index 186e3f9c6f..03341da829 100644
--- a/src/southbridge/intel/lynxpoint/usb_xhci.c
+++ b/src/southbridge/intel/lynxpoint/usb_xhci.c
@@ -23,7 +23,11 @@
 
 typedef struct southbridge_intel_lynxpoint_config config_t;
 
-static u8 *usb_xhci_mem_base(device_t dev)
+#ifdef __SIMPLE_DEVICE__
+static u8 *usb_xhci_mem_base(pci_devfn_t dev)
+#else
+static u8 *usb_xhci_mem_base(struct device *dev)
+#endif
 {
 	u32 mem_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
 
@@ -34,7 +38,11 @@ static u8 *usb_xhci_mem_base(device_t dev)
 	return (u8 *)(mem_base & ~0xf);
 }
 
-static int usb_xhci_port_count_usb3(device_t dev)
+#ifdef __SIMPLE_DEVICE__
+static int usb_xhci_port_count_usb3(pci_devfn_t dev)
+#else
+static int usb_xhci_port_count_usb3(struct device *dev)
+#endif
 {
 	if (pch_is_lp()) {
 		/* LynxPoint-LP has 4 SS ports */
@@ -81,7 +89,11 @@ static void usb_xhci_reset_port_usb3(u8 *mem_base, int port)
  *  b) Poll for warm reset complete
  *  c) Write 1 to port change status bits
  */
-static void usb_xhci_reset_usb3(device_t dev, int all)
+#ifdef __SIMPLE_DEVICE__
+static void usb_xhci_reset_usb3(pci_devfn_t dev, int all)
+#else
+static void usb_xhci_reset_usb3(struct device *dev, int all)
+#endif
 {
 	u32 status, port_disabled;
 	int timeout, port;