1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bootblock_common.h>
#include <stdint.h>
#include <device/pnp_def.h>
#include <device/pnp_ops.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <northbridge/intel/sandybridge/raminit_native.h>
#include <northbridge/intel/sandybridge/raminit.h>
#include <northbridge/intel/sandybridge/sandybridge.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/common/gpio.h>
#include <superio/winbond/common/winbond.h>
void mainboard_pch_lpc_setup(void)
{
/* Set COM3/COM1 decode ranges: 0x3e8/0x3f8 */
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0070);
/* Enable KBC on 0x06/0x64 (KBC),
* EC on 0x62/0x66 (MC),
* EC on 0x20c-0x20f (GAMEH),
* Super I/O on 0x2e/0x2f (CNF1),
* COM1/COM3 decode ranges. */
pci_write_config16(PCH_LPC_DEV, LPC_EN,
KBC_LPC_EN | MC_LPC_EN |
CNF1_LPC_EN | GAMEH_LPC_EN |
COMA_LPC_EN | COMB_LPC_EN);
}
void bootblock_mainboard_early_init(void)
{
int lvds_3v = 0; /* 0 (5V) or 1 (3V3) */
int dis_bl_inv = 1; /* backlight inversion: 1 = disabled, 0 = enabled */
const pnp_devfn_t dev = PNP_DEV(0x2e, 0x9);
pnp_enter_conf_state(dev);
pnp_write_config(dev, 0x29, 0x02); /* Pins 119, 120 are GPIO21, 20 */
pnp_write_config(dev, PNP_IDX_EN, 0x03); /* Enable GPIO2+3 */
pnp_write_config(dev, 0x2a, 0x01); /* Pins 62, 63, 65, 66 are
GPIO27, 26, 25, 24 */
pnp_write_config(dev, 0x2c, 0xc3); /* Pin 90 is GPIO32,
Pins 78~85 are UART B */
pnp_write_config(dev, 0x2d, 0x00); /* Pins 67, 68, 70~73, 75, 77 are
GPIO57~50 */
pnp_set_logical_device(dev);
/* Values can only be changed, when devices are enabled. */
pnp_write_config(dev, 0xe3, 0xdd); /* GPIO2 bits 1, 5 are output */
pnp_write_config(dev, 0xe4, (dis_bl_inv << 5) | (lvds_3v << 1)); /* GPIO2 bits 1, 5 */
/* Disable suspend LED during normal operation */
pnp_write_config(dev, PNP_IDX_MSC3, 0x40);
pnp_exit_conf_state(dev);
}
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
struct pei_data pei_data_template = {
.pei_version = PEI_VERSION,
.mchbar = (uintptr_t)DEFAULT_MCHBAR,
.dmibar = (uintptr_t)DEFAULT_DMIBAR,
.epbar = DEFAULT_EPBAR,
.pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
.smbusbar = CONFIG_FIXED_SMBUS_IO_BASE,
.wdbbar = 0x4000000,
.wdbsize = 0x1000,
.hpet_address = CONFIG_HPET_ADDRESS,
.rcba = (uintptr_t)DEFAULT_RCBABASE,
.pmbase = DEFAULT_PMBASE,
.gpiobase = DEFAULT_GPIOBASE,
.thermalbase = 0xfed08000,
.system_type = 0, /* 0 Mobile, 1 Desktop/Server */
.tseg_size = CONFIG_SMM_TSEG_SIZE,
.spd_addresses = { 0xA0, 0x00,0xA4,0x00 },
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 1,
.gbe_enable = 1,
.ddr3lv_support = 0,
/*
* 0 = leave channel enabled
* 1 = disable dimm 0 on channel
* 2 = disable dimm 1 on channel
* 3 = disable dimm 0+1 on channel
*/
.dimm_channel0_disabled = 2,
.dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
/* enabled USB oc pin length */
{ 1, 0, 0x0040 }, /* P0: lower left USB 3.0 (OC0) */
{ 1, 0, 0x0040 }, /* P1: upper left USB 3.0 (OC0) */
{ 1, 0, 0x0040 }, /* P2: lower right USB 3.0 (OC0) */
{ 1, 0, 0x0040 }, /* P3: upper right USB 3.0 (OC0) */
{ 1, 0, 0x0040 }, /* P4: lower USB 2.0 (OC0) */
{ 1, 0, 0x0040 }, /* P5: upper USB 2.0 (OC0) */
{ 1, 0, 0x0040 }, /* P6: front panel USB 2.0 (OC0) */
{ 1, 0, 0x0040 }, /* P7: front panel USB 2.0 (OC0) */
{ 1, 4, 0x0040 }, /* P8: internal USB 2.0 (OC4) */
{ 1, 4, 0x0040 }, /* P9: internal USB 2.0 (OC4) */
{ 1, 4, 0x0040 }, /* P10: internal USB 2.0 (OC4) */
{ 1, 4, 0x0040 }, /* P11: internal USB 2.0 (OC4) */
{ 1, 4, 0x0040 }, /* P12: internal USB 2.0 (OC4) */
{ 1, 4, 0x0040 }, /* P13: internal USB 2.0 (OC4) */
},
.usb3 = {
.mode = 3, /* Smart Auto? */
.hs_port_switch_mask = 0xf, /* All four ports. */
.preboot_support = 1, /* preOS driver? */
.xhci_streams = 1, /* Enable. */
},
.pcie_init = 1,
};
*pei_data = pei_data_template;
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
/* enabled power USB oc pin */
{ 1, 0, 0 }, /* P0: lower left USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P1: upper left USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P2: lower right USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P3: upper right USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P4: lower USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P5: upper USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P6: front panel USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P7: front panel USB 2.0 (OC0) */
{ 1, 0, 4 }, /* P8: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P9: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P10: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P11: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P12: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P13: internal USB 2.0 (OC4) */
};
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
{
read_spd(&spd[0], 0x50, id_only);
read_spd(&spd[2], 0x52, id_only);
}
void mainboard_early_init(int s3resume)
{
/* Enable PEG10 (1x16) */
pci_write_config32(PCI_DEV(0, 0, 0), DEVEN,
pci_read_config32(PCI_DEV(0, 0, 0), DEVEN) |
DEVEN_PEG10);
}
int mainboard_should_reset_usb(int s3resume)
{
return !s3resume;
}
|
