Add a PE/COFF extra action lib that DEBUG prints the debugger command to load symbols. Turn off DXE Core DEBUG print on load and use this new library in its place.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10373 6f19259b-4bc3-4df7-8a09-765794883524

3 files changed, 9 insertions, 105 deletions

diff --git a/BeagleBoardPkg/Sec/Cache.c b/BeagleBoardPkg/Sec/Cache.c
index 12b585e7cf..7bb3ba10bf 100644
--- a/BeagleBoardPkg/Sec/Cache.c
+++ b/BeagleBoardPkg/Sec/Cache.c
@@ -75,5 +75,5 @@ InitCache (
   

   ArmConfigureMmu (MemoryTable, &TranslationTableBase, &TranslationTableSize);

   

-  BuildMemoryAllocationHob((EFI_PHYSICAL_ADDRESS)(UINTN)TranslationTableBase, TranslationTableSize, EfiBootServicesData);

+  BuildMemoryAllocationHob((EFI_PHYSICAL_ADDRESS)(UINTN)TranslationTableBase, TranslationTableSize, EfiBootServicesData);
 }

diff --git a/BeagleBoardPkg/Sec/Sec.c b/BeagleBoardPkg/Sec/Sec.c
index fa18038a9a..a9bd00690f 100644
--- a/BeagleBoardPkg/Sec/Sec.c
+++ b/BeagleBoardPkg/Sec/Sec.c
@@ -22,6 +22,7 @@
 #include <Library/OmapLib.h>

 #include <Library/ArmLib.h>

 #include <Library/PeCoffGetEntryPointLib.h>

+#include <Library/DebugAgentLib.h>

 

 #include <Ppi/GuidedSectionExtraction.h>

 #include <Guid/LzmaDecompress.h>

@@ -30,17 +31,6 @@
 #include "LzmaDecompress.h"

 

 VOID

-EFIAPI 

-_ModuleEntryPoint(

-  VOID

-  );

-

-CHAR8 *

-DeCygwinPathIfNeeded (

-  IN  CHAR8   *Name

-  );

-

-VOID

 PadConfiguration (

   VOID

   );

@@ -50,6 +40,7 @@ ClockInit (
   VOID

   );

 

+

 VOID

 TimerInit (

   VOID

@@ -59,8 +50,7 @@ TimerInit (
   UINT32 TimerBaseAddress = TimerBase(Timer);

 

   // Set source clock for GPT3 & GPT4 to SYS_CLK

-  MmioOr32(CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS 

-                          | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);

+  MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);

 

   // Set count & reload registers

   MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000);

@@ -127,52 +117,6 @@ LzmaDecompressLibConstructor (
   VOID

   );

 

-/**

-  If the build is done on cygwin the paths are cygpaths. 

-  /cygdrive/c/tmp.txt vs c:\tmp.txt so we need to convert

-  them to work with RVD commands

-

-  This is just code to help print out RVD symbol load command.

-  If you build with cygwin paths aren't compatible with RVD.

-

-  @param  Name  Path to convert if needed

-

-**/

-CHAR8 *

-SecDeCygwinPathIfNeeded (

-  IN  CHAR8   *Name

-  )

-{

-  CHAR8   *Ptr;

-  UINTN   Index;

-  UINTN   Len;

-  

-  Ptr = AsciiStrStr (Name, "/cygdrive/");

-  if (Ptr == NULL) {

-    return Name;

-  }

-  

-  Len = AsciiStrLen (Ptr);

-  

-  // convert "/cygdrive" to spaces

-  for (Index = 0; Index < 9; Index++) {

-    Ptr[Index] = ' ';

-  }

-

-  // convert /c to c:

-  Ptr[9]  = Ptr[10];

-  Ptr[10] = ':';

-  

-  // switch path seperators

-  for (Index = 11; Index < Len; Index++) {

-    if (Ptr[Index] == '/') {

-      Ptr[Index] = '\\' ;

-    }

-  }

-

-  return Name;

-}

-

 

 VOID

 CEntryPoint (

@@ -209,52 +153,11 @@ CEntryPoint (
 

   // Start talking

   UartInit ();

-  DEBUG ((EFI_D_ERROR, "UART Enabled\n"));

-

-  DEBUG_CODE_BEGIN ();

-    //

-    // On a debug build print out information about the SEC. This is really info about

-    // the PE/COFF file we are currently running from. Useful for loading symbols in a

-    // debugger. Remember our image is really part of the FV.

-    //

-    RETURN_STATUS       Status;

-    EFI_PEI_FV_HANDLE   VolumeHandle;

-    EFI_PEI_FILE_HANDLE FileHandle;

-    VOID                *PeCoffImage;

-    UINT32              Offset;

-    CHAR8               *FilePath;

-    FfsAnyFvFindFirstFile (EFI_FV_FILETYPE_SECURITY_CORE, &VolumeHandle, &FileHandle);

-    Status = FfsFindSectionData (EFI_SECTION_TE, FileHandle, &PeCoffImage);

-    if (EFI_ERROR (Status)) {

-      // Usually is a TE (PI striped down PE/COFF), but could be a full PE/COFF

-      Status = FfsFindSectionData (EFI_SECTION_PE32, FileHandle, &PeCoffImage);

-    }

-    if (!EFI_ERROR (Status)) {

-      Offset = PeCoffGetSizeOfHeaders (PeCoffImage);

-      FilePath = PeCoffLoaderGetPdbPointer (PeCoffImage);

-      if (FilePath != NULL) {

-      

-        // 

-        // In general you should never have to use #ifdef __CC_ARM in the code. It

-        // is hidden in the away in the MdePkg. But here we would like to print differnt things

-        // for different toolchains. 

-        //

-#ifdef __CC_ARM

-        // Print out the command for the RVD debugger to load symbols for this image

-        DEBUG ((EFI_D_ERROR, "load /a /ni /np %a &0x%08x\n", SecDeCygwinPathIfNeeded (FilePath), (CHAR8 *)PeCoffImage + Offset));

-#elif __GNUC__

-        // This may not work correctly if you generate PE/COFF directlyas then the Offset would not be required

-        DEBUG ((EFI_D_ERROR, "add-symbol-file %a 0x%08x\n", FilePath, PeCoffImage + Offset));

-#else

-        DEBUG ((EFI_D_ERROR, "SEC starts at 0x%08x with an entry point at 0x%08x %a\n", PeCoffImage, _ModuleEntryPoint, FilePath));

-#endif

-      }

-    }

-

-   

-  DEBUG_CODE_END ();

-

+ 

+  InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL);

+  SaveAndSetDebugTimerInterrupt (TRUE);

 

+  DEBUG ((EFI_D_ERROR, "UART Enabled\n"));

 

   // Start up a free running time so that the timer lib will work

   TimerInit ();

diff --git a/BeagleBoardPkg/Sec/Sec.inf b/BeagleBoardPkg/Sec/Sec.inf
index ff48d3bfc0..435975db70 100644
--- a/BeagleBoardPkg/Sec/Sec.inf
+++ b/BeagleBoardPkg/Sec/Sec.inf
@@ -48,6 +48,7 @@
   LzmaDecompressLib
   OmapLib
   PeCoffGetEntryPointLib
+  DebugAgentLib
 
 [FeaturePcd]  
   gEmbeddedTokenSpaceGuid.PcdCacheEnable